8 GB
Q Assembly
Q Fitting the light
Use a clean, fluff-free cloth when you are fitting
the bulb.
Modell 14119000L / 14119006L:
Fit the bulb 2 and the glass shade 3 on to
the spotlight together (see Fig. B). Use a dry, fluff-
free cloth for this. First put the bulb 2 into the
glass shade 3. Insert the bulb 2 carefully
into the fitting and attach it along with the glass
shade 3 by turning it a ¼ turn clockwise. Now
press the glass shade 3 into the spotlight 1
and lock it in place by turning it a ¼ turn clock-
wise. Check that everything is correctly seated.
Model 14119104L / 14119106L:
Insert the light bulb 2 into the socket and
install with a ¼ turn to the right.
Place the chrome ring / titanium ring 6 onto the
light bulb 2 and secure with a little pressure.
Check for correct seating.
Screw the light in place in a suitable location.
Make sure the surface for mounting is dry, smoo
th,
and free of dust and grease.
Note: make sure that the anti-slip rubbers and
the bracket 7 are secure.
Insert the mains plug 5 (attached to the mains
lead) into the mains socket.
Your spotlight is now ready for operation.
Q Operation
Q On / Off switch
Flip the ON / OFF in-line switch 4 to turn the
spotlight on or off.
Q Directing the spotlight
Only change the direction of the spotlight 1
after the light has been switched off.
Allow the lamp to cool down completely.
Turn the spotlight 1 in the desired direction. The
spotlight 1 can be turned to face any direction.
Q Changing the bulbs
DANGER OF ELECTRIC
SHOCK! First pull the plug 5 attached to the
mains lead out of the mains socket.
Allow the lamp to cool down completely.
Only change the bulb 2 when it has completely
cooled down. Use a clean, lint-free cloth when
changing light bulbs.
Model 14119000L / 14119006L:
Release the defective light bulb 2 from the
socket with a ¼ turn to the left.
ATTENTION: When you loosen the bulb 2
you also loosen the glass shade 3.
Make sure you hold on to it.
Only use lamps specified in chapter “Technical
information“.
Now fit the new bulb 2 and the glass shade 3
on to the spotlight together (see Fig. B). First
put the bulb 2 into the glass shade 3. Insert
the bulb 2 carefully into the fitting and attach
it along with the glass shade 3 by turning it a
¼ turn clockwise. Now press the glass shade 3
into the spotlight 1 and lock it in place by
turning it a ¼ turn clockwise.
Check that everything is correctly seated.
Model 14119104L / 14119106L:
Remove the chrome ring / titanium ring 6 from
the light bulb 2.
Release the defective light bulb 2 from the
socket with a ¼ turn to the left.
Install the new light bulb 2 with a ¼ turn to
the right.
Place the chrome ring / titanium ring 6 onto
the light bulb 2 and secure with a little pres-
sure. Check for correct seating.
Q Maintenance and Cleaning
DANGER OF ELECTRIC
SHOCK! First pull the plug 5 attached to the
Assembly / Operation / Maintenance and Cleaning