ECOVACS DEEBOT N8 High Performance Vacuum Instrukcja obsługi

Instruction Manual/Bedienungsanleitung/Manual de instrucciones/

Manuel d'instructions/Manuale d'uso/Руководство по эксплуатации/

Instrukcja obsługi/Gebruiksaanwijzing

2

EN

1. This Appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the Appliance in a safe

way and understand the hazards involved. Children

shall not play with the Appliance. Cleaning and user

maintenance shall not be made by children without

supervision.

2. Clear the area to be cleaned. Remove power cords

and small objects from the oor that could entangle

the Appliance. Tuck rug fringe under the rug base, and

lift items such as curtains and tablecloths off the oor.

3. If there is a drop off in the cleaning area due to a step

or stairs, you should operate the Appliance to ensure

that it can detect the step without falling over the edge.

It may become necessary to place a physical barrier

at the edge to keep the unit from falling. Make sure the

physical barrier is not a trip hazard.

4. Only use as described in this manual. Only

use attachments recommended or sold by the

manufacturer.

5. Please make sure your power supply source voltage

matches the power voltage marked on the Docking

Station.

6. For INDOOR household use ONLY. Do not use

the Appliance in outdoor, commercial or industrial

environments.

7. Use only the original rechargeable battery and

Docking Station provided with the Appliance from

the manufacturer. Non-rechargeable batteries are

prohibited.

8. Do not use without dust bin and/or lters in place.

9. Do not operate the Appliance in an area where there

are lit candles or fragile objects.

10. Do not use in extremely hot or cold environments (below

-5˚C/23˚F or above 40˚C/104˚F).

11. Keep hair, loose clothing, ngers, and all parts of

body away from any openings and moving parts.

12. Do not operate the Appliance in a room where an

infant or child is sleeping.

13. Do not use Appliance on wet surfaces or surfaces

with standing water.

14. Do not allow the Appliance to pick up large objects

like stones, large pieces of paper or any item that

may clog the Appliance.

1. Important Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical Appliance, basic

precautions should always be followed, including

the following:

READ ALL INSTRUCTIONS BEFORE

USING THIS APPLIANCE

SAVE THESE INSTRUCTIONS

3EN

15. Do not use Appliance to pick up ammable or

combustible materials such as gasoline, printer or

copier toner, or use in areas where they may be present.

16. Do not use Appliance to pick up anything that is

burning or smoking, such as cigarettes, matches, hot

ashes, or anything that could cause a re.

17. Do not put objects into the suction intake. Do not

use if the suction intake is blocked. Keep the intake

clear of dust, lint, hair, or anything that may reduce

air ow.

18. Take care not to damage the power cord. Do not pull

on or carry the Appliance or Docking Station by the

power cord, use the power cord as a handle, close a

door on the power cord, or pull power cord around

sharp edges or corners. Do not run Appliance over the

power cord. Keep power cord away from hot surfaces.

19. If the power cord is damaged, it must be replaced

by the manufacturer or its service agent in order to

avoid a hazard.

20. Do not use the Docking Station if it is damaged. The

power supply is not to be repaired and not to be

used any longer if it is damaged or defective.

21. Do not use with a damaged power cord or

receptacle. Do not use the Appliance or Docking

Station if it is not working properly, has been

dropped, damaged, left outdoors, or come in contact

with water. It must be repaired by the manufacturer

or its service agent in order to avoid a hazard.

22. Turn OFF the power switch before cleaning or

maintaining the Appliance.

23. The plug must be removed from the receptacle

before cleaning or maintaining the Docking Station.

24. Remove the Appliance from the Docking Station, and

turn OFF the power switch to the Appliance before

removing the battery for disposal of the Appliance.

25. The battery must be removed and discarded

according to local laws and regulations before

disposal of the Appliance.

26. Please dispose of used batteries according to local

laws and regulations.

27. Do not incinerate the Appliance even if it is severely

damaged. The batteries can explode in a re.

28. When not using the Docking Station for a long

period of time, please unplug it.

29. The Appliance must be used in accordance with

the directions in this Instruction Manual. ECOVACS

ROBOTICS cannot be held liable or responsible for

any damages or injuries caused by improper use.

30. The robot contains batteries that are only

replaceable by skilled persons. To replace the

robot’s battery, please contact Customer Service.

31. If the robot will not be used for a long time, power

OFF the robot for storage and unplug the Docking

Station.

32. WARNING: For the purposes of recharging the

battery, only use the detachable supply unit

CH1822 provided with the Appliance, or CH1918

sold separately as an accessory.

4

EN

To satisfy RF exposure requirements, a separation distance

of 20 cm or more should be maintained between this

device and persons during device operation.

To ensure compliance, operations at closer than this

distance is not recommended. The antenna used for this

transmitter must not be co-located in conjunction with any

other antenna or transmitter.

To disable Wi-Fi module on DEEBOT, power the robot ON.

Place the robot on the Docking Station making sure the

Charging Contacts on DEEBOT and the Docking Station

Pins make a connection.

Press and hold the AUTO Mode Button on the robot for

20 seconds until DEEBOT emits 3 beeps.

To enable Wi-Fi module on DEEBOT, power the robot OFF

and then power ON. The Wi- Fi module is turned on when

DEEBOT is restarted.

Correct Disposal of this Product

This marking indicates that this product should not be

disposed of with other household waste throughout

the EU. To prevent possible harm to the environment or

human health from uncontrolled waste disposal, recycle it

responsibly to promote the sustainable reuse of material

resources. To recycle your used device, please use the

return and collection systems or contact the retailer where

the product was purchased. They can safely recycle this

product.

For EU Countries

Class II

Short-circuit-proof safety isolating

transformer

Switch mode power supply

For indoor use only

Direct current

Alternating current

For EU Declaration of Conformity information, visit

https://www.ecovacs.com/global/compliance

5EN

Package Contents

Robot

Instruction Manual

Docking Station Side Brushes

Mopping Pad

Plate

Washable Mopping

Pad

Disposable

Mopping Pads

Note: Figures and illustrations are for reference only and may differ from

actual product appearance.

Product design and specications are subject to changes without notice.

Product Diagram

Robot

AUTO Mode Button

Top Cover

TrueMapping

Distance Sensor

Anti-collision Bumper

6

EN

Wi-Fi Status

Indicator

RESET Button

Dust Bin Handle

Release Button

Filter Net

Power Switch

Sponge Filter

High Efciency Filter

Multi-function

Cleaning Tool

Charging Contacts

Anti-drop Sensors

Reservoir

Main Brush

Release Button

Universal Wheel

Side Brushes

Water Outlet

Anti-drop Sensors

Driving Wheels

Main Brush

Carpet Detection

Sensor

Bottom View

7EN

Docking Station

Docking Station Pins

Power Cord

Reservoir

Water Inlet Cover

Mopping Pad

Water Inlet

Reservoir Release

Button

Mopping Pad Plate

Notes Before Cleaning

Tidy up the area to be cleaned by

putting furniture, such as chairs,

in their proper place.

During the rst use, make sure

each room door is open to help

DEEBOT fully explore your house.

It may be necessary to place a

physical barrier at the edge of a

drop to stop the unit from falling

over the edge.

Put away objects including cables, cloths and slippers, etc.

on the oor to improve the cleaning efciency.

Before using the product on a rug with tasseled edges,

please fold the rug edges under.

Please do not stand in narrow spaces, such as hallways, and

make sure not to block the LDS Laser Distance Sensor.

8

EN

Quick Start

1 Remove Protective Strips and Films

2 Assemble Docking Station

3 Install Side Brushes

Click

Charging DEEBOT

>0.5m (1.64')

>1.5m (4.92')

>0.5m (1.64')

1 Docking Station Placement

3 Charge DEEBOT

2 Power ON

Note: I = ON, O = OFF.

DEEBOT cannot be charged when being powered OFF.

Empty remaining water from the Reservoir and remove the Reservoir

and the mopping pad plate before charging DEEBOT.

ashes when DEEBOT is charging. goes out when DEEBOT is

fully charged.

* You can also purchase an Auto-Empty Station that automatically

empties your DEEBOT's dustbin. Explore more accessories at

https://www.ecovacs.com/global.

4

9EN

ECOVACS HOME

ECOVACS HOME App

To enjoy all available features, it is recommended to control your

DEEBOT via the ECOVACS HOME app.

Wi-Fi Indicator Light

Before you start, make sure that:

Tips: If you have any problems during the Wi-Fi setup process, refer

to the Troubleshooting > Wi-Fi Connection section in this manual.

• Your mobile phone is connected to a Wi-Fi network.

• The 2.4GHz band wireless signal is enabled on your router.

• The Wi-Fi indicator light on DEEBOT is slowly ashing.

Slowly flashing Disconnected to Wi-Fi or

waiting for Wi-Fi connection

Rapidly flashing Connecting to Wi-Fi

Solid Connected to Wi-Fi

1

3

Operating DEEBOT

During the rst cleaning, please supervise DEEBOT and assist it should

there be a problem.

Pressing for 3 seconds to send

DEEBOT back to the Docking Station.

Start

2Pause

Return to Charge

Note: The robot’s Control Panel stops

glowing after the robot is paused for

a few minutes. Press the AUTO Mode

Button on DEEBOT to wake up the

robot.

10

EN

1 2

OZMO Mopping System

Note: To prolong the service life of the reservoir, it is recommended

to use puried water or softened water for OZMO mopping system.

OR

Note: When DEEBOT is mopping, DEEBOT automatically detects

the carpet and keeps away from it. If you need to clean the carpet,

please uninstall the mopping pad plate rst.

Click

11 EN

To keep DEEBOT running at peak performance, perform maintenance tasks and replace parts with the following frequencies:

A multi-function Cleaning Tool is provided for easy maintenance. Handle with care, this cleaning tool has sharp edges.

Note: ECOVACS manufactures various replacement parts and ttings. Please contact Customer Service for more information on replacement parts.

Robot Part Maintenance Frequency Replacement Frequency

Disposable Mopping Pad After each use Replace after each use

Washable Mopping Pad After each use Every 50 washes

Reservoir/Mopping Pad Plate After each use /

Side Brush Once every 2 weeks Every 3-6 months

Main Brush Once per week Every 6-12 months

Sponge Filter/ High Efciency Filter Once per week Every 3-6 months

Universal Wheel

Anti-Drop Sensors

Bumper

Charging Contacts

Docking Station Pins

Once per week /

Regular Maintenance

12

EN

OZMO Mopping System

Before performing cleaning and maintenance tasks on DEEBOT, turn the robot OFF and unplug the Docking Station.

1 2 Washable Mopping Pad Disposable Mopping Pad

Clean the water inlet filter on the

bottom of the Reservoir if it is clogged.

13 EN

3

41

2

6

5 7

Dust Bin and Filters

14

EN

Main Brush and Side Brushes

Main Brush

Side Brushes

Other Components

Note: Before cleaning the robot’s Charging Contacts and Docking

Station Pins, turn the robot OFF and unplug the Docking Station.

15 EN

Storage

If DEEBOT will not be used for a while, fully charge DEEBOT and power

OFF before storage. Charge DEEBOT every 1.5 month to prevent battery

drain.

Note: When DEEBOT is not cleaning, it is recommended to keep

DEEBOT powered ON and charging.

Indicator Light

DEEBOT will tell you something is wrong with an indicator light

and voice report. More detailed support is available through the

ECOVACS HOME and online website.

Indicator Light Scenario

AUTO Mode Button

glows a solid WHITE.

The robot is cleaning.

The robot is paused while cleaning.

AUTO Mode Button

ashes WHITE.

The robot is charging.

The robot is starting.

The robot is relocating.

AUTO Mode Button

glows a solid RED. The robot has low battery.

AUTO Mode Button

ashes RED. The robot has a problem.

16

EN

No. Malfunction Possible Causes Solutions

1 DEEBOT is not charging.

DEEBOT is not switched ON. Switch ON DEEBOT.

DEEBOT has not connected to the Docking

Station.

Be sure that the robot’s Charging Contacts have connected

to the Docking Station Pins.

The Power Cord is not connected to the

Docking Station.

Make sure the Power Cord is rmly connected to the

Docking Station.

The Docking Station is not connected to the

power supply.

Make sure the Docking Station is connected to the power

supply.

The battery is completely discharged. Please contact Customer Care for help.

2DEEBOT cannot return to the

Docking Station.

The Docking Station is not correctly connected. Make sure the Docking Station is correctly connected.

The Docking Station is manually moved during the

cleaning.

It is suggested not to move the Docking Station during the

cleaning.

DEEBOT is paused for more than 90 minutes. It is suggested not to pause DEEBOT for more than 90

minutes.

DEEBOT did not start cleaning from the

Docking Station.

Make sure DEEBOT starts cleaning from the Docking

Station.

3DEEBOT gets stuck while

working and stops.

DEEBOT is tangled with something on the

oor (electrical wires, curtains, carpet fringing,

etc.).

DEEBOT will try various ways to free itself. If it is

unsuccessful, manually remove the obstacles and restart.

DEEBOT might be stuck under furniture with an

entrance of similar height.

Please set a physical barrier, or set a Virtual Boundary in

the ECOVACS HOME App.

Troubleshooting

17 EN

No. Malfunction Possible Causes Solutions

4

DEEBOT returns to the

Docking Station before it has

nished cleaning.

Working time varies according to oor

surface, room complexity and the Cleaning

Mode selected. When the battery gets low,

DEEBOT automatically switches to Recharge

Mode and returns to the Docking Station to

recharge itself.

Turn on Continuous Cleaning function in ECOVACS

HOME App. DEEBOT will automatically resume the

uncompleted cleaning cycle when Continuous Cleaning

is enabled.

DEEBOT is unable to reach certain areas

blocked by furniture or barriers.

Tidy up the area to be cleaned by putting furniture and

small objects in their proper place.

The Docking Station is too distant from the

center of the house.

Please place the Docking Station against the wall of a

central room of the house.

5

DEEBOT does not clean

automatically at the scheduled

time.

Time Scheduling function is cancelled. Program DEEBOT to clean at specic times using the

ECOVACS HOME App.

DEEBOT is switched OFF. Switch ON DEEBOT.

The robot’s battery is low.

Keep DEEBOT switched ON and connected to the

Docking Station to make sure it has a full battery to work

at any time.

6

The water is not coming out of

the Reservoir when DEEBOT is

mopping.

The water inlet lter on the bottom of

Reservoir is clogged.

Unscrew the water inlet on the bottom of Reservoir and

clean the lter.

The Reservoir runs out of water. Add water into the Reservoir.

The water outlets on the bottom of DEEBOT

are clogged. Check the water outlets on the bottom and clean.

18

EN

No. Malfunction Possible Causes Solutions

7

DEEBOT misses cleaning

spots to be cleaned, or repeats

cleaning the area cleaned.

The cleaning cycle is interfered by small

objects or barriers on the oor.

Remove power cords and small objects from the oor

to ensure cleaning efciency. DEEBOT will automatically

clean the area missed, please avoid moving DEEBOT

manually or block the path during the cleaning cycle.

DEEBOT is working on slippery polished

oors.

Make sure the oor wax is dried before DEEBOT starts

cleaning.

DEEBOT is unable to reach certain areas

blocked by furniture or barriers.

Tidy up the area to be cleaned by putting furniture and

small objects in their proper place.

The TrueMapping Distance Sensor is

blocked.

Remove the objects that are blocking the TrueMapping

Distance Sensor.

8DEEBOT is making too much

noise when cleaning. DEEBOT is tangled or blocked with debris. Clean DEEBOT and restart. If the trouble persists, please

contact Customer Care.

9DEEBOT is not able to connect

to the home Wi-Fi network.

Incorrect home Wi-Fi username or password

entered. Enter the correct home Wi-Fi username and password.

Incorrect App installed. Please download and install ECOVACS HOME App.

DEEBOT is not within range of your home

Wi-Fi signal.

Make sure DEEBOT is within range of your home Wi-Fi

signal.

Network setup started before DEEBOT was

ready.

Turn ON Power Switch. Press the RESET Button.

DEEBOT is ready for network setup when its Wi-Fi

Indicator light ashes slowly.

DEEBOT does not support 5 GHz Wi-Fi. Make sure the robot has been connected with 2.4 GHz

Wi-Fi network.

19 EN

No. Malfunction Possible Causes Solutions

10 DEEBOT does not clean the

whole area. The cleaning area is not tidy. Remove small objects from the oor and tidy up the

cleaning area before DEEBOT starts cleaning.

11 DEEBOT reservoir drops out of

place during use. The reservoir is not correctly installed. Make sure DEEBOT reservoir clicks into place when

installing.

12 DEEBOT Side Brushes drop

out of place during use. The Side Brushes are not correctly installed. Make sure the Side Brushes click into place when

installing.

Wi-Fi Connection

Before Wi-Fi setup, make sure DEEBOT, mobile phone, and Wi-Fi network meet the following requirements.

DEEBOT and Mobile Phone Requirements

• DEEBOT is fully charged and the power switch of DEEBOT is turned on.

• Wi-Fi status light slowly ashes.

• Turn off mobile phone’s cellular data (you can turn it back on after setup).

Wi-Fi Network Requirements

• You are using a 2.4GHz or 2.4/5 GHz mixed network.

• Your router supports 802.11b/g/n and IPv4 protocol.

• Do not use a VPN (Virtual Private Network) or Proxy Server.

• Do not use a hidden network.

• WPA and WPA2 using TKIP, PSK, AES/CCMP encryption.

• WEP EAP (Enterprise Authentication Protocol) is not supported.

• Use Wi-Fi channels 1-11 in North America and channels 1-13 outside North America (refer to local regulatory agency).

• If you are using a network extender/repeater, the network name (SSID) and password are the same as your primary network.

20

EN

Technical Specifications

Note: Technical and design specications may be changed for continuous product improvement.

Output power of the Wi-Fi module is less than 100mW.

* CH1918 is an Auto-Empty Station that automatically empties your DEEBOT's dustbin. Explore more accessories at https://www.ecovacs.com/global.

Model DLN26

Rated Input 20V 1A

Docking Station Model CH1822 CH1918 (Sold Separately)

Input 100-240V

50-60Hz 0.5A Rated Input (Charging)

For European

Union Only

220-240V

50-60Hz 0.3A

For Russia Only 220V

50-60Hz 0.3A

Output 20V 1A Rated Output 20V 1A

/Power (Auto-Emptying) 1000W

Frequency bands 2400-2483.5MHz

Off Mode Power Less than 0.50W

Networked Standby Power Less than 2.00W

Strona się ładuje...

ECOVACS DEEBOT N8 High Performance Vacuum Instrukcja obsługi

ECOVACS DEEBOT N8 High Performance Vacuum Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty