MILL AV600 Instrukcja obsługi

Assembly and instruction manual

Series:

Steel & Glass WiFi

EN SLO

Please read the instructions carefully before use.

Take good care of this manual for later use.

PL IT

Thanks for buying Mill

Our company was founded in Norway in 1992 by Cato Bryn, specializing in distribution

sell to many of the largest retailers in the Nordic countries.

In 2010, Cato’s son, Phillip joined the company. Philip looked at the heating industry

with fresh new eyes and wondered why there had been so little change with the

appearance of portable heaters in the last 20 years, especially since interior design in

general had changed dramatically over the years. Philip thought consumers should

have more styles to choose from other than the typical old-fashioned, traditional

heaters.

Since heaters are part of so many homes, Philip and Cato decided to use their

extensive knowledge to re-invent the design of heaters. They wanted to create

beautiful, modern and minimalistic heaters, using the most advanced technology, that

would complement people’s homes. They launched the brand “Mill” in 2012.

to complement our line of products to meet consumers’ demand.

Prospering on our success in the Nordics we decided to promote Mill at some of the

world’s largest electronic fairs and home shows,and the feedback from

retailers and distributors all over the world were amazing. We are proud to say that

consumers in over 25 countries can now keep warm with style!

Follow us on social media:

@millheat

millheat.com

[email protected]

@

Content

P. 2-3

P. 4

P. 5

P. 6

P. 7

P. 8

P. 9

P. 10

Important safety information

First use

Minimum distances

Description of heater

Assembly

Power indicator

Temperature calibration

Resetting the heater

Memory function

“Open Window” function

Instructions

Usage without WiFi connection

Usage with WiFi connection

Color codes (WiFi control light)

Activating WiFi

Deactivating WiFi

Reconnecting to WiFi

Delete WiFi settings

Maintenance

Warranty

Waste disposal

|

IN ORDER TO AVOID OVERHEATING,

DO NOT COVER THE HEATER.

STORE THIS INSTRUCTION

MANUAL FOR FUTURE USE!

NEVER TOUCH YOUR HEATER OR ITS

CASING WITH WET HANDS!

1

EN

millheat.com

You must obey common safety guidelines when using electrical

products, especially in the presence of children.

WARNING! To avoid electric shock or damage due to the

heat, always make sure the plug is pulled out before the

heater is moved or cleaned.

READ THE INSTRUCTIONS CAREFULLY

• The product is intended for home use only.

• Make sure the heater is connected to the house's regular mains

as indicated on the heater.

•

• Check for any pieces of packing foam or cardboard that may

have fallen into the heating elements of the heater. These pieces

must be removed to avoid unpleasant odors.

• Prevent the heater from overheating – do not cover.

• long period of time.

• Pay special attention if the heater is used in rooms where

children, the handicapped or elderly reside.

• The heater should not be set up directly beneath an electrical

socket outlet.

• The cord must not be laid under any kind of carpet. Make sure the

cord is laid in such a way that nobody can trip on it.

• The heater must not be used if either the cord or plug is

damaged. The heater must not be used if it has been dropped

malfunction.

• The cord must be repaired by the manufacturer or by an expert if it

has been damaged, to avoid dangerous situations.

• Avoid using extension cords, which may overheat and could

• hazards by making sure the air intakes are not blocked or

Important safety information

2

EN

• The heater should not be installed in close proximity to

• The heater must never be used in rooms where gasoline, paint or

• Never touch an electric heater with wet hands. The heater

should be installed so a person showering or taking a bath

cannot come into direct contact with it.

• Some parts of this product can become very hot and cause

burns. Particular attention has to be given where children and

vulnerable people are present.

• heater must cool down before it is moved.

• Avoid overloading the mains (the circuit) where the heater is

connected. The heater may overload the electrical circuit if

other electrical devices are plugged into the same socket outlet.

• Do not use this heater in small rooms when they are occupied

by persons not capable to leaving the room on their own, unless

constant supervision is provided.

• The product cannot be used by children under 8 years of age

and persons with reduced physical or mental abilities or lack

of experience and knowledge unless they have been given

supervision or instruction in the safe use of the product and

understand the hazards involved.

• Children should not play with the product. Cleaning and

maintenance should not be done by unsupervised children.

• Children under the age of 3 should be kept away from the

product, unless they are under constant supervision.

• Children aged 3 to 8 years are only permitted to turn the

product ON/OFF, assuming the heater is mounted according

to the assembly instructions and the children have received

instruction or supervision in the safe use of the product and

understand the hazards involved.

• Do not use this heater in the immediate surroundings of a bath,

a shower or a swimming pool.

WARNING! The heater must not be used if the glass panels are

damaged (this applies to the products with model names starting

with AV).

3

EN

millheat.com

Model Thermostat Color Height Width Amperage Power (W) IP WiFi

NE600WIFI WiFi White 40,0 cm 65,0 cm 220-240V~, 50-60Hz 600 IPx4 802.11b/g/n

NE900WIFI WiFi White 40,0 cm 85,0 cm 220-240V~, 50-60Hz 900 IPx4 802.11b/g/n

NE1200WIFI WiFi White 40,0 cm 105,0 cm 220-240V~, 50-60Hz 1200 IPx4 802.11b/g/n

NE1500WIFI WiFi White 40,0 cm 85,0 cm 220-240V~, 50-60Hz 1500 IPx4 802.11b/g/n

NE800LWIFI WiFi White 25,0 cm 105,0 cm 220-240V~, 50-60Hz 800 IPx4 802.11b/g/n

NE1000LWIFI WiFi White 25,0 cm 121,5 cm 220-240V~, 50-60Hz 1000 IPx4 802.11b/g/n

AV600WIFI WiFi White 40,0 cm 66,5 cm 220-240V~, 50-60Hz 600 IPx4 802.11b/g/n

AV900WIFI WiFi White 40,0 cm 86,5 cm 220-240V~, 50-60Hz 900 IPx4 802.11b/g/n

AV1200WIFI WiFi White 40,0 cm 106,5 cm 220-240V~, 50-60Hz 1200 IPx4 802.11b/g/n

AV800LWIFI WiFi White 25,0 cm 106,5 cm 220-240V~, 50-60Hz 800 IPx4 802.11b/g/n

AV1000LWIFI WiFi White 25,0 cm 123,0 cm 220-240V~, 50-60Hz 1000 IPx4 802.11b/g/n

The heaters are approved for use in zone 2 in wet rooms (IPx4 approved)

ATTENTION! The heaters will be connected directly to your WiFi router and it is

of active devices connected at the same time.

≥100 mm

≥50 mm≥50 mm

≥100 mm

≥100 mm in front

of heater

First use

Minimum Distances

transport. Contact the retailer or importer if you discover any visible damages to the product.

Keep the outer packaging to transport the heater in the future. If you want to dispose

the packaging, make sure it is done properly. Keep plastic bags away from children.

d period without use,

the heater can produce a burnt odor for a short time. This is normal.

Please read all the instructions carefully before use. Save the instruction manual for future use.

It is also normal for the heater to make “sounds” when it warms up or cools down.

4

EN

Maximum transmitting power: ≤20dBm

Frequency range: 2400-2483.5MHz

See ﬁgure 1 on separate illustration sheet

See ﬁgure 2 on separate illustration sheet

Resetting the heater

Assembly

See ﬁgure 3 on separate illustration sheet

Power indicator

A. Drill holes in the wall for holes 1 & 2. Then drill holes in the wall for the topmost holes

(holes 3 & 4 by using 6)

B. Insert the wall plugs into the drilled holes and attach the bracket with 4 screws

C. Place the heater on the lower lugs on the bracket, then hang the heater on the

upper lugs (li the heater slightly to align the heater with for the upper lugs). Screw

in the locking screws on the top of the bracket (clockwise)

If the heater uses power (for example, when it heats up), the power indicator is on.

(Can be done even if you are connected to WiFi)

See ﬁgure 4 on separate illustration sheet

Temperature calibration

It may occur deviation between the temperature registered by the heater and the

actual temperature in the room. This can be caused by several reasons, however, the

most common is that the heater is placed in a fair distance from where you usually

reside. When you set the temperature to for example 22 degrees, it is only natural that

you expect the same temperature where your sofa is placed for instance. However,

the temperature sensor is placed on the product itself, and therefore a deviation in

temperature may occur. To adjust this, all Mill heaters are equipped with a calibration

function, which enables you to adjust the temperature registered by the heater. N.B! The

room must have achieved a stable temperature before any calibration.

MILL STEEL MILL GLASS

A B

1. On/O

2. Wall bracket

3 Temperature sensor

4. Heat emission

5. Thermostat

6. Steel front

1. On/O

2. Wall bracket

3. Temperature sensor

4. Heat emission

5 Thermostat

6. Glass front

Press 2 times and use the wheel (+ or –) to set the actual temperature observed

in the room. Conﬁrm with or wait 15 seconds for automatic conﬁrmation.

ATTENTION! Horizontal placement only.

5

EN

millheat.com

Instructions

“Open window” function

The heater has an “open window” function that is activated instantly when it registers a

sudden drop in temperature with more than 2 degrees Celsius in 2 minutes. The heater

will automatically stop heating and FO will be visible in the display of the heater.

from FO to desired room temperature).

Resetting the heater

main switch.

Memory function

The heater remembers all the temperature settings and will automatically return to the

TIPS! The thermostat can be used as a regular electronic thermostat (i.e. the

heater will maintain a constant temperature 24 hours a day). Please see the section

explaining usage without WiFi connection for further information

Control Panel

1. Display (shows the desired room temperature by default)

2. WiFi indicator

3. Power indicator — Shows whether the heater is using power or not

4. Control button (+) (increase temperature)

5. Control button (–) (reduce temperature)

6. WiFi button

7. Function button (F)

ATTENTION! In the event of a power cut, the thermostat will reconnect with WiFi

where all the temperatures are saved.

WARNING! BEFORE THE HEATER IS TURNED ON, IT MUST BE ATTACHED TO A WALL. IF

THE HEATER IS NOT INSTALLED CORRECTLY OR IS INSTALLED ASKEW, THIS MAY CAUSE

THE HEATER TO MALFUNCTION OR IN THE WORST CASE, BE DAMAGED.

If the temperature sensor is not functioning properly, you will see this

symbol on the display. Please contact the dealer or importer.

6

EN

ATTENTION! Can only be done when WiFi is deactivated (see page 9 for deactivating

WiFi).

Usage without WiFi connection

Set desired temperature without WiFi connection

Press the arrow buttons to set the desired temperature. The heater keeps an even

temperature the whole day and night.

Usage with WiFi connection

A free app is available for downloading for iOS and Android.

By connecting your heaters with the iOS/Android device you can do the following:

• Control all your heaters situated in multiple locations . Everything is controlled with

the Millheat-app (with same user)

• Set up weekly programs (or use the standard program already available in the

app) by using the 4 modes: Comfort, Sleep, Away and OFF

•

There is no need to edit your program if you get home earlier than normal one day

• Enable vacation mode for saving energy while you are away. The app will

automatically increase the temperature in your house before you get back home

• Share your house with other family members, making control easy

•

manually, so that the heaters keep an even temperature throughout the whole day

and night.

• + many other things

To download the app search for “millheat” in Appstore or Google Play and

install the app on your device.

Before use:

Be aware that the Millheat-app must be installed before you can connect your

heaters to your WiFi network. You can then simply follow the instructions given in the

app when connecting your heaters. The heaters will connect directly to your router via

WiFi with 2,4 Ghz mode b/g/n. Minimum OS requirement: iOS 8.0 and Android 4.0.

7

EN

millheat.com

Color codes (WiFi control light)

The heater has not been connected to WiFi. The heater keeps an even

temperature throughout the whole day and night.

The heater is online in the Millheat cloud

1. The heater’s WiFi is deactivated by the user

2. When installing/connecting the Millheat-app and cloud, the light will ﬂash

in various speed. This is normal.

The heater has a problem connecting to or ﬁnding the WiFi signal. Please do

the following:

1. Please turn the heater OFF and ON again

2. Please restart the WiFi router

3. Please check the WiFI router to make sure the capacity is sucient for the

number of active devices connected at the same time

4. Please make sure 2,4 Ghz is activated. If the problem persists we

recommend you to deactivate 5 Ghz during the installation. Aer the

installation 5 Ghz can be activated again.

The heaters are oine and have no contact with the Millheat cloud

Go to our help desk at www.millheat.com for more information or if you have

any questions regarding the Millheat-app, connecting to WiFi or other relating

questions.

ATTENTION! The heaters will be connected directly to your WiFi router and it

number of active devices connected at the same time.

8

EN

Reconnecting WiFi

Press the WiFi button 1 time. Relevant only if WiFi is already installed.

Deactivating WiFi

Press 1 time on the WiFi button. The heater can now be used as described on page 7

(usage without WiFi connection). Relevant only if WiFi is already installed.

Activating WiFi

Press «add heater» on the home screen in the Millheat-app. Follow the instructions in

the app.

Delete WiFi setting

Delete WiFi-settings: Press and hold WiFi button for 3 seconds.

heater’s main switch. Press and hold while you switch on the heater’s main switch.

9

EN

millheat.com

Maintenance

Warranty

Waste disposal

Mill International B.V.

De Giesel 5

6081 PG Haelen

The Netherlands

Tel: +47 22 13 32 00

www.millheat.com

[email protected]

Maintenance

Warranty

Waste disposal

1. For cleaning, always unplug the heater and leave it to cool.

2. Wipe the heater regularly with a damp cloth and dry the surface before turning on

the heater again.

3. The heater must be cleaned at least once a month during the heating season.

CAUTION! The heater should never be immersed in water.

Avoid using detergents to clean the heater.

Never let any water get inside the heater; this can be hazardous.

4.

5. The heater can be stored in a dry and clean place.

6. If the heater stops working, do not attempt to repair it yourself because it can

The warranty is valid for 2 years. The heater will be repaired or replaced during

this time should any malfunction occur. The warranty applies if the heater is used

according to these instructions and the customer can present a purchase receipt. If

the heater malfunctions in any way, please contact the store where it was purchased

or the importer.

The symbol indicates that this product is not to be disposed of together with

household waste. This product must be delivered to a recycling service or container

for electrical appliances and electronic equipment. This is done to avoid health risks

and prevent harm to the environment. Local businesses (or the environmental station

in your neighborhood) are required by law to accept and recycle such products, as a

means of environmentally sound disposal.

10

EN

Vsebina

Pomembni varnostni podatki

Speciﬁkacije

Pred prvo uporabo

Prva uporaba

Minimalne razdalje

Opis grelnika

Montaža

Indikator napajanja

Umerjanje temperature

Ponastavitev grelnika

Spominska funkcija

Funkcija »odprtega okna«

Navodila za uporabo

Uporaba brez WiFi povezave

Uporaba z WiFi povezavo

Barvne oznake (nadzorna lučka WiFi)

Aktiviranje WiFi

Deaktiviranje WiFi

Ponovno povezovanje WiFi

Pobrišite WiFi nastavitve

Vzdrževanje

Garancija

Odlaganje odpadkov

S. 2-3

S. 4

S. 5

S. 6

S. 7

S. 8

S. 9

S. 10

|

NE POKRIVAJTE GRELNIKA, DA NE

PRIDE DO PREGREVANJA.

Pozorno preberite navodila za uporabo, preden

pričnete z uporabo proizvoda. Skrbno shranite

ta navodila za kasnejšo uporabo.

TA NAVODILA ZA UPORABO

SHRANITE ZA KASNEJŠE

PREVERJANJE!

NIKOLI SE NE DOTIKAJTE

GRELNIKA ALI OHIŠJA Z

MOKRIMI ROKAMI!

1

SLO

millheat.com

• Ta proizvod je namenjen zgolj domači uporabi.

• Grelnik priključite na hišno omrežno napajanje, kot je

navedeno na grelniku.

• Novi grelniki ob prvi uporabi oddajajo določen vonj. To bo po

krajšem času izginilo in je povsem neškodljivo.

• Preverite, če so v grelne elemente grelnika padli koščki

embalažne pene ali lepenke. Te koščke je potrebno odstraniti, da

ne pride do neprijetnih vonjev.

• Preprečite pregrevanje grelnika – ne pokrivajte.

• Vedno izklopite grelnik in ga iztaknite iz vtičnice, če ga dalj časa

ne uporabljate.

• Bodite še posebej pozorni, če se grelnik uporablja v prostorih, kjer

se nahajajo otroci, invalidi ali starejši.

• Grelnik ne sme biti postavljen neposredno pod električno vtičnico.

• Kabla ni dovoljeno polagati pod preproge. Položen mora biti tako,

da se nihče ne more spotakniti obenj.

• Če sta kabel ali vtikač poškodovana, se grelnika ne sme

uporabljati.

• Grelnika se ne sme uporabljati, če je padel na tla ali je kakor koli

poškodovan in okvarjen.

• Poškodovani kabel mora popraviti proizvajalec ali strokovnjak, da

ne pride do nevarnih situacij.

• Ne uporabljajte podaljškov kabla, saj se lahko pregrejejo in vžgejo.

• Nikoli ne pokrivajte prezračevalnih odprtin na grelniku. Preprečite

požarno nevarnost, tako da preprečite blokiranje ali pokrivanje

prezračevalnih odprtin. Grelnik je potrebno uporabljati v prostorih z

običajnimi ravnimi tlemi.

Pri uporabi elektronskih aparatov je potrebno upoštevati

splošne varnostne smernice, še posebej v prisotnosti otrok.

OPOZORILO! Za preprečevanje električnega udara in

škode zaradi vročine, je potrebno vedno izključiti vtič pred

premikanjem ali čiščenjem grelnika.

SKRBNO PREBERITE NAVODILA

Pomembni varnostni podatki

2

SLO

OPOZORILO! Grelnika ni dovoljeno uporabljati, če so steklene plošče

poškodovane (to velja za proizvode z nazivi modelov, ki se začnejo na AV).

• Grelnika ni dovoljeno namestiti v bližini vnetljivih materialov,

saj obstaja nevarnost požara.

• Grelnika ni dovoljeno uporabljati v prostorih, kjer se hranijo

bencin, laki, barvila ali druge vnetljive snovi, npr. v garaži.

• Nikoli se ne dotikajte električnega grelnika z mokrimi rokami.

Namestite ga tako, da se ga ne more dotakniti osebe med

tuširanjem ali v kadi.

• Nekateri deli izdelka se lakho zelo segrejejo in povzročijo

opekline. Posebno pozornost je potrebno posvetiti otrokom in

ranljivim osebam.

• Pred premikanjem je grelnik potrebno izključiti, iztakniti vtič,

grelnik pa se mora ohladiti.

• Ne preobramenite električnih povezav (el. omrežja) grelnika.

Grelnik lahko preobremeni el. tokokrog, če v isto vtičnico

priključite tudi drugi električne naprave.

• Ne uporabljajte grelnika v majhnih prostorih, kjer se nehajajo

osebe, ki prostora ne morajo zapustiti same, razen če so pod

stalnim nadzorom.

• Proizvoda ne smejo uporabljati otroci mlajši od 8 let in osebe

z omejenimi ﬁzičnimi ali umskimi zmožnostmi ali neizkušene

oz. nepoučene osebe, razen če so pod nadzorom ali so bile

poučene o varni uporabi proizvoda ter razumejo s tem

povezane nevarnosti.

• Otroci se ne smejo igrati s proizvodom. Otroci brez nadzora

ne smejo čistiti ali vzdrževati proizvoda.

• Otroci mlajši od 3 let se ne smejo približevati proizvodu, razen

če so pod stalnim nadzorom.

• Otroci stari od 3 do 8 let lahko proizvod izključijo/vključijo

zgolj, če je grelnik nameščen v skladu z navodili za uporabo in

so bili otroci poučeni o varni uporabi oz. so med uporabo pod

nadzorom ter razumejo s tem povezane nevarnosti.

• Ne uporabljajte tega grelnika v neposredni bližini kadi, tuša ali

plavalnega bazena.

3

SLO

millheat.com

Speciﬁkacije

≥100 mm

≥50 mm≥50 mm

≥100 mm

≥100 mm pred grelnik.

Minimalne razdalje

Modell Termostat Barva Višina Širina Jakost toka Moč (W) IP WiFi

NE600WIFI WiFi Bela 40,0 cm 65,0 cm 220-240V~, 50-60Hz 600 IPx4 802.11b/g/n

NE900WIFI WiFi Bela 40,0 cm 85,0 cm 220-240V~, 50-60Hz 900 IPx4 802.11b/g/n

NE1200WIFI WiFi Bela 40,0 cm 105,0 cm 220-240V~, 50-60Hz 1200 IPx4 802.11b/g/n

NE1500WIFI WiFi Bela 40,0 cm 85,0 cm 220-240V~, 50-60Hz 1500 IPx4 802.11b/g/n

NE800LWIFI WiFi Bela 25,0 cm 105,0 cm 220-240V~, 50-60Hz 800 IPx4 802.11b/g/n

NE1000LWIFI WiFi Bela 25,0 cm 121,5 cm 220-240V~, 50-60Hz 1000 IPx4 802.11b/g/n

AV600WIFI WiFi Bela 40,0 cm 66,5 cm 220-240V~, 50-60Hz 600 IPx4 802.11b/g/n

AV900WIFI WiFi Bela 40,0 cm 86,5 cm 220-240V~, 50-60Hz 900 IPx4 802.11b/g/n

AV1200WIFI WiFi Bela 40,0 cm 106,5 cm 220-240V~, 50-60Hz 1200 IPx4 802.11b/g/n

AV800LWIFI WiFi Bela 25,0 cm 106,5 cm 220-240V~, 50-60Hz 800 IPx4 802.11b/g/n

AV1000LWIFI WiFi Bela 25,0 cm 123,0 cm 220-240V~, 50-60Hz 1000 IPx4 802.11b/g/n

Grelniki se lahko uporabljajo v coni 2 v kopalnicah (odobreno za IPx4)

POZOR! Grelnik bo neposredno povezan z vašim WiFi usmerjevalnikom, zato

mora le-ta imeti ustrezno zmogljivost v primeru več povezanih aktivnih naprav.

Pred prvo uporabo

Prva uporaba

Po razpakiranju grelnika preverite, če je bil izdelek poškodovan med prevozom. Stopite

v stik s preprodajalcem ali uvoznikom, če odkrijete vidne poškodbe na izdelku.

Zunanjo embalažo shranite za kasnejši prevoz grelnika. Embalažo je potrebno odlagati

na primeren način. Plastične vreče shranite stran od dosega otrok.

Ob prvi vključitvi ali vključitvi po daljšem obdobju mirovanja, lahko grelnik kratek čas

oddaja vonj po ožganem. To je normalno.

Pred uporabo pozorno preberite vsa navodila. Shranite navodila za uporabo za

kasnejše preverjanje.

Normalno je tudi, da grelnik med segrevanjem in ohlajanjem proizvaja določene

»zvoke«.

4

SLO

Največja moč oddajanja: ≤20dBm

Frekvenčni razpon: 2400-2483.5MHz

Če grelnik uporablja napajanje (npr. kadar greje), je indikator napajanja prižgan.

Glej sliko 1 na posebnem listu z diagramom

Glej sliko 2 na posebnem listu z diagramom

Glej sliko 3 na posebnem listu z diagramom

Glej sliko 4 na posebnem listu z diagramom

Opis grelnika

MILL STEEL MILL GLASS

A B

Montaža

Indikator napajanja

Umerjanje temperature

Pride lahko do odstopanja med temperaturo, ki jo zabeleži grelnik in dejansko

temperaturo v prostoru. To se lahko zgodi iz več razlogov, najpogostejši pa je, da je

grelnik postavljen v določeni razdalji od mesta, kjer se nahajate. Če na primer

temperaturo nastavite na 22 stopinj, lahko pričakujete, da bo temperatura enaka kot

tam, kjer se nahaja kavč. Vendar pa je temperaturni senzor nameščen na sam

proizvod, zato lahko pride do odstopanj v temperaturi. Za odpravo tega so vsi grelniki

Mill opremljeni s funkcijo umerjanja, ki vam omogoča nastavitev temperature, ki jo

zaznava grelnik.

Opomba: Temperatura v prostoru se mora ustaliti, preden pričnete z umerjanjem.

Pritisnite 2-krat in uporabite + ali – za nastavitev dejanske temperature, ki je zaznana

prostoru. Potrdite s pritiskom na ali počakajte 15 sekund za samodejno potrditev.

(To se lahko izvaja tudi, če ste povezani WiFi)

A. Izvrtajte luknje v steno za izvrtini 1 in 2. Nato izvrtajte luknje za najvišje lege

(izvrtini 3 in 4 z uporabo 6).

B. Vstavite stenske vtiče v izvrtane luknje in pritrdite nosilec s 4 vijaki.

C. Postavite grelnik na spodnja držala na nosilcu, nato obesite grelnik na zgornja

držala (dvignite grelnik, da ga uravnate z zgornjimi držali). Privijte blokirne vijake

na vrh nosilca (v smeri urinega kazalca).

1. Vklop/izklop

2. Stenski nosilec

3 Temperaturni senzor

4. Oddajanje toplote

5. Termostat

6. Jekleni sprednji del

1. Vklop/izklop

2. Stenski nosilec

3. Temperaturni senzor

4. Oddajanje toplote

5 Termostat

6. Steklen sprednji del

POZOR! SAMO HORIZONTALNI PLACEMENT.

5

SLO

millheat.com

Glej sliko 6 na posebnem listu z diagramom

Glej sliko 5 na posebnem listu z diagramom

Navodila za uporabo

Funkcija »odprtega okna«

Grelnik ima funkcijo »odprtega okna«, ki se vključi takoj, ko zabeleži nenaden padec

temperature za več kot 2 stopinje Celzija v 2 minutah. Grelnik bo samodejno

prenehal z gretjem, na zaslonskem prikazu pa se bo izpisalo FO.

Grelnik bo samodejno ponovno pričel z gretjem po 10 minutah (prikaz se preklopi iz

FO na želeno sobno temperaturo).

Ponastavitev grelnika

Izklopite glavno stikalo grelnika.

Držite gumb medtem pa vklopite glavno stikalo grelnika.

Spominska funkcija

Grelnik ima v spominu vse nastavitve temperature in se samodejno vrne na želeno

temperaturo po začasni prekinitvi električnega napajanja. Vaše nastavitve dnevnih in

nočnih zamikov pa se bodo po prekinitvi električnega napajanja izbrisale, zato jih

boste morali ponovno nastaviti.

NASVET! Termostat se lahko uporablja kot navaden elektronski termostat (grelnik bo

ohranjal stalno temperaturo 24 ur na dan). Za več podatkov preverite poglavje s

predstavitvijo uporabe brez WiFi povezave.

Nadzorna plošča

1. Prikaz

2. WiFi indikator

3. Indikator napajanja – kaže, če grelnik uporablja napajanje ali ne

4. Nadzorni gumb (+) (povišanje temperature)

5. Nadzorni gumb (-) (znižanje temperature)

6. WiFi gumb

7. Funkcijski gumb (F)

POZOR! V primeru začasne prekinitve električnega napajanja se bo termostat

ponovno povezal z WiFi, kjer so shranjene vse temperature.

OPOZORILO! PRED VKLJUČITVIJO GRELNIKA JE LE-TEGA POTREBNO PRITRDITI NA

STENO. ČE GRELNIK NI NAMEŠČEN USTREZNO, ALI JE NAMEŠČEN POSTRANI,

LAHKO ZARADI TEGA PRIDE DO OKVARE ALI CELO POŠKODBE GRELNIKA.

Če temperaturni senzor ne deluje pravilno, se bo prikazal ta znak.

Stopite v stik s preprodajalcem ali uvoznikom.

6

SLO

Pritisnite gumbe s puščicami za nastavitev želene temperature. Grelnik ohranja

enakomerno temperaturo cel dan in noč.

POZOR! To je mogoče izvajati zgolj, če je WiFi deaktiviran (glej stran 9 za

deaktiviranje WiFi).

Glej sliko 7 na posebnem listu z diagramom

Uporaba brez WiFi povezave

Nastavite želeno temperaturo brez WiFi povezave

Uporaba z WiFi povezavo

Na voljo je brezplačna aplikacija za nalaganje za iOS in Android.

Ko priključite grelnik na na napravo z iOS/Android, lahko storite naslednje:

• Nadzorujete vse vaše grelnike, ki se nahajajo na različnih lokacijah. Vse regulira

aplikacija Millheat (za istega uporabnika).

• Nastavite tedenske programe (ali uporabljate standarden program, ki je že na voljo v

aplikaciji) s 4 načini: Comfort, Sleep, Away, OFF.

• Nastavite posamezne temperature za različne načine v vsakem prostoru.

• Prekličite nastavljene programe za celotno hišo, posamezne sobe ali določen

grelnik.

Programa ni potrebno spreminjati, če se kakšen dan vrnete domov prej kot običajno.

• Omogočite počitniški način za varčevanje z energijo, ko ste odsotni. Aplikacija bo

samodejno povišala temperaturo v vaši hiši, preden se vrnete domov.

• Delite svojo hišo z drugimi družinskimi člani, kar olajša reguliranje.

• Če internet ne deluje, lahko izključite WiFi na grelnikih in jih regulirate ročno, tako da

se ohranja enaka temperatura skozi cel dan in noč.

• + Veliko drugih stvari.

Za nalaganje aplikacije iščite “millheat” v Appstore ali Google Play in

namestite aplikacijo na vašo napravo.

Pred uporabo:

Preden lahko grelnik priključite na WiFi omrežje morate naložiti aplikacijo Millheat.

Nato med priključitvijo grelnika zgolj sledite navodilom v aplikaciji. Grelnik se bo

samodejno povezal na vaš usmerjevalnik prek WiFi z 2,4 Ghz način b/g/n. Minimalna

zahteve za OS: iOS 8.0 in Android 4.0.

7

SLO

millheat.com

Grelnik ni bil povezan z WiFi. Grelnik vzdržuje enako temperaturo

skozi cel dan in noč.

Grelnik je povezan s spletom v oblaku Millheat.

1 WiFi grelnika izključi uporabnik.

2. Med nalaganjem/povezovanjem aplikacije Millheat in oblaka, bo lučka

utripala z različnimi hitrostmi. To je normalno.

Grelnik ima težave pri iskanju ali povezovanju s WiFi signalom. Storite

naslednje:

1 Izključite in nato ponovno vključite grelnik.

2. Ponovno vklopite WiFi usmerjevalnik.

3. Preverite, če je zmogljivost WiFi usmerjevalnika zadostna za

istočasno povezovanje več grelnikov ali drugih naprav.

4. 2,4 Ghz mora biti aktivirano. Če se težave ponavljajo,

deaktivirajte 5 Ghz med namestitvijo. Po namestitvi lahko

ponovno aktivirate 5 Ghz.

Grelniki niso povezani s spletom in nimajo stika z oblakom Millheat.

utripa

Barvne oznake (nadzorna lučka WiFi)

Pojdite na naslov za spletno pomoč www.millheat.com za več informacij, ali če

imate vprašanja v zvezi z aplikacijo Millheat, povezovanjem z WiFi, itd.

POZOR! Grelnik bo neposredno povezan z vašim WiFi usmerjevalnikom,

zato mora le-ta imeti ustrezno zmogljivost v primeru več povezanih

grelnikov ali drugih naprav.

8

SLO

Strona się ładuje...

MILL AV600 Instrukcja obsługi

MILL AV600 Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty