RTS Ekp-3016 Instrukcja obsługi

RTS
Marka
RTS
Model
Ekp-3016
Typ
Instrukcja obsługi
Innovating the Future of Global Communications
Installation Instructions
EXP-3016 Expansion Panel Reference View
EKP-3016
Expansion Keypanel
Specications
LCD Display
Active Area
120.10mm (wide) x 18.77mm (high)
Dot Resolution
576 x 90 pixels
Color Resolution
16-bit (64K) RGB color
View Angle
80 degrees (typical; all directions)
Connector
EXP IN
EXP OUT
General
Storage Temperature
-40°C to 70°C (-40°F to 158°F)
Operating Temperature
0°C to 55°C (32°F to 131°F)
Dimensions
441.82mm W x 43.8mm H x 98.5mm D
(17.39” x 1.72” x 3.92”)
Weight
2.95lb (1.34kg)
Power Consumption
Nominal - 6 Watts
Maximum - 7 Watts
Maximum Voltage Amp - 36 VA
Input Power
100~240VAC, 50–60Hz
1. Display Screen
2. Expansion Keys
3. AC/Power
4. Power Supply Cable Tie Mounting Hole
5. RJ-45 Expansion IN
6. Power Supply Bracket Mounting Holes
NOTE: The EKP-3016 is not compatible with the KP-5032 or KP-4016 keypanels.
Innovating the Future of Global Communications
www.rtsintercoms.com
Mounting the Power Supply to EKP-3016
To mount the power supply mounting bracket to an EKP-3016, do the following:
1. Align the power supply mounting bracket screw holes with the appropriate mounting holes on the rear panel of the
EKP-3016 unit.
2. Using a screwdriver, attach the power supply mounting bracket with the two (2) supplied screws.
3. Attach the power supply cable tie clip to the predened clip mounting hole on the rear of the keypanel unit.
4. From the left-hand side of the mounting bracket, carefully slide the power supply into the bracket.
NOTE: The Frame and EXP OUT connections cannot be populated until the power supply mounting bracket is fully
installed.
5. Attach the DC power connector to the unit.
6. Carefully coil the power supply cord and insert it into the cord clip.
7. Attach the AC power connector to the power outlet on the power supply.
8. Plug the power cord into an electrical outlet.
Innovating the Future of Global Communications
www.rtsintercoms.com
Expansion Panel Cabling Reference
RJ-45 EXP IN (expansion)
Pin Assignment
1 NC
2 NC
3 NC
4 NC
5 NC
6 NC
7 RS485+
8 RS485-
RJ-45 EXP OUT (expansion)
Pin Assignment
1 NC
2 NC
3 NC
4 NC
5 NC
6 NC
7 RS485+
8 RS485-
Bosch Security Systems, Inc. | 12000 Portland Avenue South | Burnsville, Minnesota 55337
Telephone: 877·863·4169 | Fax: (800) 323-0498
Form Number: F.01U.316.031 Rev 03
Date: July 2017
  • Page 1 1
  • Page 2 2
  • Page 3 3

RTS Ekp-3016 Instrukcja obsługi

RTS
Marka
RTS
Model
Ekp-3016
Typ
Instrukcja obsługi
ściągnij PDF
raport

w innych językach

Powiązane dokumenty

Inne dokumenty