Maxon XPO Karta katalogowa

Typ
Karta katalogowa
Low temperature burners - XPO burner
www.maxoncorp.com
combustion systems for industry
Maxon reserves the right to alter specifications and data without prior notice.
© 2012 Copyright Maxon Corporation. All rights reserved.
1-2.4-1
E-m-9/12
XPO
Ultra low NOx indirect burner
Low temperature burner for use with clean fuel gases
Single digit NOx emissions at 30% excess air
High efficiency with low excess air requirements
Capacities up to 2340 kW with a least 3:1 turndown ratio
For use in indirect fired solution backed heaters
www.maxoncorp.com
combustion systems for industry
Maxon reserves the right to alter specifications and data without prior notice.
© 2012 Copyright Maxon Corporation. All rights reserved.
1-2.4-2
E-m-9/12 Low temperature burners - XPO burner
Product description
MAXON XPO burners are low temperature burners for use in liquid backed applications, including:
Water back heater
Fire tube boiler
Thermal oil heater
Direct contact water heater
Solution heating/tanks
Snow melters
XPO burners provide high efficiency operation with low excess air requirements. They are designed for ease of retrofitting into
existing liquid backed applications.
XPO burners are available in two basic versions:
Packaged (PB) with integral combustion air blower
External blower (EB) for use with an external combustion air source for extended capacities
Both packaged (PB) and external blower (EB) versions include two different choices for blast tube lengths. A 610 mm or 1220 mm
long blast tube is available. Blast tube length should be selected based on the wall penetration depth or non-liquid cooled portion of
fire tube.
The packaged (PB) version also includes a choice of blower voltage and a choice of air/fuel ratio control actuators. MAXON
requires the use of parallel positioning control systems. For indoor, general purpose installations, use Honeywell ControLink™ or
equivalent system. For outdoor or hazardous duty service installations, use MAXON SMARTLINK® MRV control systems.
XPO burner with
Honeywell ControLink™
XPO burner with
MAXON SMARTLINK®
Low temperature burners - XPO burner
www.maxoncorp.com
combustion systems for industry
Maxon reserves the right to alter specifications and data without prior notice.
© 2012 Copyright Maxon Corporation. All rights reserved.
1-2.4-3
E-m-9/12
Available XPO ultra low NOx burner sizes
Packaged (PB) versions
External blower (EB) versions
Typical burner data
Fuel: natural gas at 15°C with 10.9 kWh/Nm3 HHV - sg = 0.6 [1]
Combustion air: 15°C - 21% O2 - 50% humidity - sg = 1.0 [1]
Stated pressures are indicative. Actual pressures are a function of air humidity, altitude, type of fuel and gas quality.
XPO 1 PB 2
XPO 1 PB 4
XPO 2 PB 2
XPO 2 PB 4
XPO 3 PB 2
XPO 3 PB 4 XPO 4 PB 4 XPO 5 PB 4
15%
excess
air
30%
excess
air
15%
excess
air
30%
excess
air
15%
excess
air
30%
excess
air
15%
excess
air
30%
excess
air
15%
excess
air
30%
excess
air
Maximum burner capacity [4] kW 351 293 688 615 966 878 1464 1318 1932 1757
Minimum burner capacity [2] kW 88 88 173 173 193 193 293 293 293 293
Turndown ratio [3] 4:1 3.3:1 4:1 3.6:1 5:1 4.5:1 5:1 4.5:1 6.6:1 6:1
[1] sg (specific gravity) = relative density to air (density air = 1.293 kg/Nm3)
[2] Minimum burner capacity will be affected by fuel and applications parameters (heat flux).
[3] Turndown ratio will vary depending on the application heat flux. Lower heat flux (<3631 kW/m2) will result with lower turndown ratios.
[4] Capacity displayed assumes blower operation on 60Hz electrical supply. Gross output will be reduced by 17% if operated on 50Hz. Fuel and
air pressure should be reduced by 30% while motor power will reduce 40% with 50Hz operation. Turndown ratio will be reduced in kind with
minimum capacity remaining fixed.
Typical burner data
Fuel: natural gas at 15°C with 10.9 kWh/Nm3 HHV - sg = 0.6 [1]
Combustion air: 15°C - 21% O2 - 50% humidity - sg = 1.0 [1]
Stated pressures are indicative. Actual pressures are a function of air humidity, altitude, type of fuel and gas quality.
XPO 3 EB 2
XPO 3 EB 4 XPO 5 EB 4
15%
excess air
30%
excess air
15%
excess air
30%
excess air
Maximum burner capacity [4] kW 1318 1230 2577 2342
Minimum burner capacity [2] kW 220 220 439 439
Turndown ratio [3] 6:1 5.6:1 5.9:1 5.3:1
[1] sg (specific gravity) = relative density to air (density air = 1.293 kg/Nm3)
[2] Minimum burner capacity will be affected by fuel and applications parameters (heat flux).
[3] Turndown ratio will vary depending on the application heat flux. Lower heat flux (<3631 kW/m2) will result with lower turndown ratios.
[4] Capacity displayed assumes blower operation on 60Hz electrical supply. Gross output will be reduced by 17% if operated on 50Hz. Fuel and
air pressure should be reduced by 30% while motor power will reduce 40% with 50Hz operation. Turndown ratio will be reduced in kind with
minimum capacity remaining fixed.
www.maxoncorp.com
combustion systems for industry
Maxon reserves the right to alter specifications and data without prior notice.
© 2012 Copyright Maxon Corporation. All rights reserved.
1-2.4-4
E-m-9/12 Low temperature burners - XPO burner
Applications
XPO ultra low NOx burners should be used in liquid backed applications, including:
Water back heater
Fire tube boiler
Thermal oil heater
Direct contact water heater
Solution heating/tanks
Snow melters
*All non-liquid cooled surfaces must be insulated as shown above.
1) XPO burner
2) Mounting flange
3) Unit wall
4) Liquid solution
5) Fire tube
6) Burner blast tube
7) Non-cooled fire tube
wall
8) Customer-supplied
insulation*
1
2
3
4
5
6
78
Low temperature burners - XPO burner
www.maxoncorp.com
combustion systems for industry
Maxon reserves the right to alter specifications and data without prior notice.
© 2012 Copyright Maxon Corporation. All rights reserved.
1-2.4-5
E-m-9/12
Dimensions and weights
XPO 1 PB (packaged) burners with MAXON SMARTLINK® actuator
XPO 1 PB (packaged) burners with general purpose actuator
(shown with Honeywell ControLinks™ actuator)
1) 1-1/2” NPT main gas
inlet
2) Air inlet
3) Burner blast tube
4) 6 mm optional oven
wall gasket
1) 1-1/2” NPT main gas
inlet
2) Air inlet
3) Burner blast tube
4) 6 mm optional oven wall
gasket
Dimensions in mm unless stated otherwise
Burner size A B C D E F G H J Weight kg
XPO 1 PB 2 592 282 5 398 734 208 138 41 146 68
XPO 1 PB 4 1145 848 5 398 734 208 138 41 146 77
A
BCD
EF
G
H
J
4
3
1
2
A
BC
DEF
H
4
2
1
J
3
www.maxoncorp.com
combustion systems for industry
Maxon reserves the right to alter specifications and data without prior notice.
© 2012 Copyright Maxon Corporation. All rights reserved.
1-2.4-6
E-m-9/12 Low temperature burners - XPO burner
XPO 2 & 3 PB (packaged) burner with MAXON SMARTLINK® actuator
XPO 2 & 3 PB (packaged) burners with general purpose actuator
(shown with Honeywell ControLinks™ actuator)
1) 1-1/2” NPT main gas inlet
2) Air inlet
3) Burner blast tube
4) 6mm optional oven wall
gasket
1) 1-1/2” NPT main gas inlet
2) Air inlet
3) Burner blast tube
4) 6mm optional oven wall
gasket
Dimensions in mm unless stated otherwise
Burner size A B C D E F G H Weight kg
XPO 2 PB 2 592 269 288 208 262 210 42 146 86
XPO 2 PB 4 1145 838 288 208 262 210 42 146 95
XPO 3 PB 2 592 259 288 208 262 210 42 146 104
XPO 3 PB 4 1145 810 288 208 262 210 42 146 113
H
A
B
3
EC
D
F
4G
1
2
A
B
3
H
C
D
F
4G
1
2
Low temperature burners - XPO burner
www.maxoncorp.com
combustion systems for industry
Maxon reserves the right to alter specifications and data without prior notice.
© 2012 Copyright Maxon Corporation. All rights reserved.
1-2.4-7
E-m-9/12
XPO 4 & 5 PB (packaged) burner with MAXON SMARTLINK® actuator
XPO 4 & 5 PB (packaged) burners with general purpose actuator
(shown with Honeywell ControLinks™ actuator)
1) 2” NPT main gas inlet
2) Air inlet
3) Burner blast tube
4) 6mm optional oven wall
gasket
1) 2” NPT main gas inlet
2) Air inlet
3) Burner blast tube
4) 6mm optional oven wall
gasket
Dimensions in mm unless stated otherwise
Burner size A B C D E F G H Weight kg
XPO 4 PB 4 10.96 756 90 180 62 288 657 952 153
XPO 5 PB 4 10.96 736 90 180 62 288 657 952 153
A
BC
D
4
E
1
2
F
G
H
3
A
B
C
3
D
4
E
1
2
F
G
H
www.maxoncorp.com
combustion systems for industry
Maxon reserves the right to alter specifications and data without prior notice.
© 2012 Copyright Maxon Corporation. All rights reserved.
1-2.4-8
E-m-9/12 Low temperature burners - XPO burner
XPO 3 EB (external blower) burner
XPO 5 EB (external blower) burner
Typical emissions
XPO burner will achieve ultra low NOx emissions while operating at 30% excess air level.
Exact emissions performance may vary in your application. Contact MAXON for information on installation specific estimates or
guarantees. No guarantee of emissions is intended or implied without specific written guarantee from MAXON.
Read “Specifications of XPO burners” for complete information on XPO burners.
1) 1-1/2” NPT gas inlet
2) Combustion air inlet
3) Burner blast tube
4) 6 mm optional oven wall
gasket
Dimensions in mm unless specified otherwise
Burner size A B C D E F Weight kg
XPO 3 EB 2 591 259 412 145 42 200 32
XPO 3 EB 4 1145 810 412 145 42 200 41
1) 2” NPT gas inlet
2) Combustion air inlet
3) Burner blast tube
4) 6 mm optional oven wall
gasket
Dimensions in mm unless specified otherwise
Burner size A B C D E F Weight kg
XPO 5 EB 4 1096 737 600 90 180 62 59
C
4B
A
3
D
E
1
2
F
CA
BD
3
E
4
F
1
2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Maxon XPO Karta katalogowa

Typ
Karta katalogowa

w innych językach

Powiązane artykuły