Manta MM275 Instrukcja obsługi

Marka: Manta

Model: MM275

Kategoria: Odtwarzacze CD

Typ: Instrukcja obsługi

Instrukcja obsługi

User’s Manual

FatBoy Boombox BT

MM275

User’s Manual

IMPORTANT NOTES ........................................................................................................................3

SCHEMAT .............................................................................................................................................5

REMOTE HANDSET..........................................................................................................................7

POWER SOURCE ...............................................................................................................................9

TURNING THE UNIT ON/OFF .......................................................................................................9

TUNING RADIO STATIONS ........................................................................................................11

CD/MP3 OPERATION ............................................................................................................................12

USB OPERATION .....................................................................................................................................16

MIC JACK OPERATION..........................................................................................................................17

GUITAR JACK OPERATION ..................................................................................................................18

SPECIFICATIONS .....................................................................................................................................19

Instrukcja obsługi

WAŻNE INFORMACJE ..................................................................................................................21

POŁOŻENIE EMENTÓW STERUJĄCYCH ..............................................................................23

PILOT ZDALNEGO STEROWANIA ...........................................................................................25

ZASILANIE .........................................................................................................................................27

TRYB ODTWARZACZA PŁYT CD I MP3 ...............................................................................32

TRYB USB ...........................................................................................................................................35

TRYB BLUETOOTH® .......................................................................................................................35

TRYB AUX ..........................................................................................................................................37

DZIAŁANIE GNIAZDA MIKROFONU MIC ..........................................................................37

DZIAŁANIE GNIAZDA GITAROWEGO ....................................................................................38

SPECYFIKACJA ................................................................................................................................39

MM275

IMPORTANT NOTES

INTRODUCTION

 Thank you for buying this product.

 Please read through these operating instructions, so you will know how to operate your

equipment properly. After you finished reading the instructions manual, put it in a safe place

for future reference.

CAUTION

Use of controls or adjustment or performance of procedures other than those specified herein

may result in hazardous radiation exposure.

DANGER

This Compact disc player is classified as a Class 1

LASER PRODUCT.

THE CLASS 1 LASER PRODUCT label is located

on the rear exterior.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modifications.

Avoid installing the unit in locations described below:

Places exposed to direct sunlight or close to heat radiating appliances such as electric

heaters, or other equipment that radiate too much heat.

Places subject to constant vibration.

Unventilated or dusty places.

Humid or moist places.

Operate buttons and switches as instructed in the manual.

Before turning on the power for the first time, make sure that the power cord is properly

installed.

Store the unit in a cool area to avoid damage from heat.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER

(OR BACK). DO NOT OPEN THE UNIT. FOR SERVICE, PLEASE REFER TO

QUALIFIED SERVICE PERSONNEL.

WARNING:

- Remove batteries if exhausted or if they will not be used for a long period.

- The incorrect use of batteries can cause electrolyte leakage and will corrode the

compartment or cause the batteries to burst. Therefore:

 Do not mix battery types, e.g., alkaline with zinc carbonate.



When inserting new batteries, replace all batteries at the same time.

MM275

LOCATION OF CONTROLS

MM275

NAMES OF CONTROLS

1. Display

2. USB port

3. Remote control compartment

4. FOLDER/MEM./10 +button

5. FOLDER/MEM./10 - button

6. PROG/P-MODE button

7. 6.3mm MIC input jack

8. 3.5mm AUX IN jack

9. MIC Volume + button

10. MIC Volume – button

11. Speaker guard

12. Left/Right speakers

13. NEXT/FORWARD button

14. PLAY/PAIR button

15. GUITAR Volume + button

16. GUITAR Volume – button

17. 3.5mm headphone jack

18. 6.3mm guitar input jack

19. PREVIOUS/REVERSE button

20. VOLUME dial

21. TUNING dial

22. STOP button

23. ID3 button

24. Telescopic antenna

25. EQ button

26. LIGHT button

27. FUNCTION button

28. POWER/STANDBY button

29. Left/Right Subwoofer

30. Battery compartment door

31. Carrying strap

32. Heat emission vents

33. AC power cable socket

Note: Please remove the plastic protector from the battery compartment before using for the

first time.

REMOTE CONTROL OPERATION

To operate the unit with the remote control, point the remote

transmitter [17] of the remote control at the IR sensor on the front

display panel of the unit. Press the buttons on the remote control to

use it.

REMOTE HANDSET

1. FUNCTION

2. MUTE

3. MEMORY

4. EQUALIZER

5. FOLDER/ 10/ MEMORY UP & DOWN

6. PREVIOUS/REVERSE and TUNING–

7. PLAY/PAUSE

8. P-MODE (Play mode)

9. STOP

10. PAIR

11. NEXT/FORWARD and TUNING+

12. ID3 (show MP3 info tags)

13. VOLUME UP & DOWN

14. LIGHT

15. VOLUME MODE

16. STANDBY (POWER)

17. Remote transmitter

18. Battery compartment

MM275

The remote works best at a distance of no further than 5 meters and within 30 degrees to

either side of the sensor. Bright sunlight or other lighting conditions in the room can interfere

with the remote control. If remote operation is unsatisfactory or stops working entirely, try using

a new battery in the remote or try darkening the room.

REPLACING THE REMOTE CONTROL BATTERY

The remote control includes one CR2025 (3V) lithium battery.

Remove the plastic protector from the battery compartment before

using the remote for the first time.

 To replace the battery, gently push the clasp to the right and then slide

the battery compartment tray out. Remove the old battery and install a

new lithium battery (type CR-2025) in the tray. The positive side of the

battery should face up.

Slide the tray back into the compartment until the clasp clicks into

place.

POWER SOURCE

This unit is designed to operate on or AC/DC electrical systems.

AC OPERATION

Plug one end of the power cord into the AC power input on the unit; plug the other end into a

household AC outlet. (Battery operation will be disabled automatically when AC power is used).

DC OPERATION

Open the battery compartment door [30]. Load 10 pieces of UM-1/D size batteries (not included)

into the compartment, taking care to match the +/– polarities marked inside the compartment.

CAUTION:

Remove batteries if they are empty or not being used for a long period

of time.

Batteries contain chemical substances and should be disposed of

properly. Check your local regulations before throwing batteries in the

trash.

MM275

BASIC FUNCTIONS

TURNING THE UNIT ON/OFF

Press the POWER button on unit or on remote control to turn the unit on or off.

NOTE: In CD/MP3/USB/Bluetooth/Aux in mode, when the unit is not providing the main function

for 15 minutes, the unit will automatically switch into standby mode. To turn on the unit again,

press "STANDBY" button.

ESD hints – The product maybe reset or not reset to operation of control due to electrostatic

discharge, just switch off and reconnect again.

SETTING THE FUNCTION MODE

There are 5 function modes; press the FUNCTION button [27] to change modes. The 5 modes

are:

TUNER: Listen to FM radio broadcasts.

CD: Play compact discs (CD-audio or CD-MP3).

USB: Play MP3s from USB memory sticks.

BLUETOOTH: Stream audio from wireless players with Bluetooth®.

The current function mode will be shown on the display [1] when you turn on the boombox.

NOTE:

The unit will automatically switch to AUX mode when a 3.5mm AUX cable is

connected to the AUX input jack [8]. Disconnect the cable to exit AUX mode.

ADJUSTING THE VOLUME

Turn the VOLUME dial [20] on the unit to increase or decrease volume. You may also use the

remote control to adjust the system volume.

EQUALIZER (EQ) FUNCTION

Press the EQ button [25] during playback to change equalizer presets. The presets are: FLAT,

CLASSIC, ROCK, POP, JAZZ, and 3D.

Choose a preset that best matches the style of music that is playing; the presets have been

calibrated to enhance your audio enjoyment.

ID3 (show tag) System

Some MP3 files are encoded with information such as the name of the song, the artist, and the

album. Together, this information is called an "ID3 tag".

Press the ID3 button [23] to cycle through which information to display when playing an MP3 file,

or choose not to show any ID3 information at all.

MM275

HEADPHONE JACK

To use headphones with your Boombox, lower the volume before connecting them to the

3.5mm Headphone jack [17]. Once connected, slowly adjust the volume to a comfortable level.

The speakers will be disabled when headphones are connected.

CAUTION: LISTENING WITH HEADPHONES AT HIGH VOLUME LEVELS MAY

CAUSE PERMANENT HEARING LOSS.

PARTY LIGHT

To change the party light effects, press the LIGHT button [26]. You can choose from different

preset modes.

To disable the party light, press the LIGHT button [26] until the lights turn off and the display [1]

reads “LIGHT OFF”.

FM TUNING MODES (Radio)

Listen to FM radio broadcasts. Press the FUNCTION button [27] until the display [1]

reads TUNER.

To optimize reception when listening to stations on the FM band, extend the

telescopic antenna to its full length.

TUNING TO A RADIO STATION

If you know the station frequency that you want to tune to directly:

Tune to a station by turning the TUNING dial [21]. The station frequency is

shown on the display [1].

To tune to a preset station:

To tune to the next preset station, press the FOLDER/MEM./10 + button [4].

To tune to the previous preset, press the FOLDER/MEM./10 - button [5].

AUTO PRESET MEMORY / SCAN

To scan for stations within reception range and save them to preset memory automatically,

press the PLAY/PAUSE/PAIR button [14]. After the unit is finished scanning, the unit will

automatically tune to preset number 1 (P01).

MANUAL PRESET MEMORY

Choose which stations to save in preset memory instead of scanning automatically.

1. Turn the TUNING dial [21] to tune to the station that you want to save as a preset

(e.g., 93.10).

2. Press the PROG/P-MODE button [6]. “P01” will flash on the display to indicate

that you are saving the station as Preset Memory 01. (To change the preset

memory number, press the FOLDER/MEM/10+ [4] or FOLDER/MEM/10– [5]

buttons.)

3. Press the PROG/P-MODE button [6] to finish saving the station (e.g., P01 is now

set to 93.10).

4. To save another station, repeat steps 1 to 3. You may save up to 30 FM stations.

MM275

CD MODE (CD and MP3 Discs)

Play CDs with audio or MP3 files. Press the FUNCTION button [27] to select “CD” mode.

SUPPORTED DISC FORMATS

This unit can play all digital audio CD/MP3, finalized digital audio CD-Recordable (CD-R) discs,

finalized digital audio CD-Rewritable (CD-RW) discs, and CD-DA formatted digital audio

CD/CD-R/CD-RW discs.

LOADING A DISC

1. Press PUSH TO OPEN on the CD door to open it; the display [1] will read

“OPEN”.

2. Place the compact disc into the tray with the label side facing up.

3. Close the CD door; the display will flash “TOC READ”, and then show the total

number of playable tracks on the disc. Playback will start automatically.

4. To remove the CD, press the STOP button [22] to stop playback. Wait for the CD

to stop spinning completely! Press PUSH TO OPEN on the CD door to open it.

Remove the CD carefully taking care to handle it by its sides.

Notes:

1. Make sure the disc is completely stopped before opening the CD door.

2. To ensure good system performance, wait until the unit reads the disc

completely before doing anything else.

3. If the disc is unreadable or if no disc is loaded in the tray, the display will

read “NO DISC”.

PLAYING A DISC

Playback starts automatically from Track 1 after a compact disc has been loaded and read by

the boombox.

To pause playback, press the PLAY/PAUSE/PAIR button [14]. The current

track time will flash on the display.

To resume playback, press the PLAY/PAUSE/PAIR button [14] again.

To stop playback, press the STOP button [22].

To skip tracks

Press the NEXT [13] or PREV [19] buttons to skip to the next or previous track respectively.

Track numbers are shown on the display.

To scan quickly to a point in a track

Press and hold the NEXT [13] or PREV [19] buttons to quickly scan forward or in reverse

through a track. The track time is shown on the display.

To skip tracks quickly (for MP3 discs, only）

To skip 10 tracks at a time, press the FOLDER/MEM/10+ button [4] to skip forward 10 tracks.

Press the FOLDER/MEM/10– button [5] to skip backwards 10 tracks.

To select a desired folder (for MP3 discs, only)

To select a track in a folder, press and hold the FOLDER/MEM/10+ [4] button each time to skip

forward a folder, then press the NEXT [13] to select desired track.

MM275

PROGRAMING TRACKS

You can create a custom play list from your disc when playback is stopped. You can program up

to 20 tracks for a CD disc and 99 tracks for an MP3 disc

1. While play is stopped, press the PROG/P-MODE button [6]. The display will flash

PROG and show “P01”.

2. Use the NEXT [13]/PREV [19] buttons to select the first track to be saved to the

program list, then press the PROG/P-MODE button [6] to save. The display will

now show the next program number (e.g., “P02”).

3. Repeat step 2 to save more tracks to the program list until all tracks have been

programmed.

4. Press the PLAY/PAUSE/PAIR button [14] to start playing the program list from

the beginning. The display will show which track is currently playing.

5. Press the STOP button [22] on unit to stop program playback.

To clear the program, open the CD compartment lid, making sure that the disc

has stopped spinning completely before you do so.

REPEAT/RANDOM/INTRO PLAY MODE (P-MODE)

To change the playback mode, press the PROG/P-MODE button [6] during playback; the

display will show the current P-MODE. Modes include repeat, random, and intro.

: Repeat the current track.

DIR: Repeat all of the tracks in the current directory/folder (MP3

playback only).

ALL: Repeat all tracks.

RAN: Play tracks in random order.

INTRO: Play the first 10 seconds of each track.

To return to normal playback, press the PROG/P-MODE button [6] until there are no P-MODE

indicators on the display. P-MODE is also canceled when you stop playback.

USB MODE

Play MP3 files from USB memory sticks. Press the FUNCTION button [27] to select “USB”

mode.

PLAYING MP3s FROM USB MEMORY

1. Connect the USB memory stick to the USB port [2] found on the front of the unit.

The display will show the total number of playable tracks on the USB device.

Playback will start automatically from Track 1.

2. To pause playback, press the PLAY/PAUSE/PAIR button [14]. The current track

time will flash on the display. To resume playback, press the PLAY/PAUSE/PAIR

button [14] again.

3. To stop playback, press the STOP button [22].

To learn more about programming playlists and repeat/random/intro playback modes, please

refer to the CD/MP3 OPERATION section of this manual.

NOTICE:



To prevent harmful interference, always connect USB devices directly to the

unit. Do not use a USB extension cable to connect USB devices to the unit.

MM275

Bluetooth® MODE

Stream audio wirelessly from players with Bluetooth. Press the FUNCTION button [27] to select

"BLUETOOTH" mode.

Wireless players with Bluetooth may include laptops, tablets, smartphones, and more. Make

sure that your player has its Bluetooth radio enabled and that it is set to be discoverable.

CONNECTING A DEVICE FOR THE FIRST TIME (PAIRING)

Before using a wireless device with Bluetooth, you will need to establish a connection between it

and the Boombox. This process is called "pairing" and you will only have to do it once. Once two

devices are paired, they will automatically connect when they detect each other.

1. When you set the Boombox to Bluetooth mode and it does not detect a paired

device, it will automatically switch to pairing mode. (The display will flash

"Bluetooth" and the blue "PAIR" indicator will blink when the Boombox is in pairing

mode.)

2. On your wireless device, go to its Bluetooth settings menu.

3. Have your wireless device "search for devices". Select the boombox (MM275)

when it is found.

4. When pairing is complete, the Boombox will emit a soft tone, the display will stop

flashing, and the blue "PAIR" indicator will light a steady blue.

The boombox will automatically connect to your wireless device next time as long as it has

Bluetooth enabled, is within range, and is set to be visible to paired devices.

Note

There are many different Bluetooth enabled devices out there; we cannot provide

instructions for all of them. Please refer to your device manufacturer's instructions

or website to learn more about connecting with Bluetooth.

PLAYING CONNECTED DEVICES

Control playback from your wireless device. The volume level may be controlled by the wireless

device or by turning the VOLUME dial [20].

Basic playback (such as play/pause, next, previous) may also be controlled by the boombox

and its remote control if your wireless device supports it.

AUX IN MODE

Play audio from devices connected to the AUX IN jack [8]. Connect a 3.5mm AUX cable to the

AUX IN jack [8] found on the front of the Boombox and it will switch to AUX mode automatically.

To exit AUX mode,disconnect the cable from the AUX IN jack [8].

1. Connect your audio device to the 3.5mm AUX IN jack [8] found on the front of the

unit with a 3.5mm AUX cable.

2. Set the volume level of the connected audio device to a comfortable level. Make

additional adjustments to the volume level by turning the VOLUME dial [20] of the

unit.

3. Control playback with your audio device.

MM275

MIC JACK OPERATION

Microphone input is available in all modes. You can speak over playback in any mode, or simply

stop playback to use the microphone by itself.

1. Connect your microphone to the 6.3mm MIC input jack [7] found on the front of the unit.

2. Press the M.VOL + button [9] or the M.VOL - button [10] to increase or decrease

the microphone input level.

GUITAR JACK OPERATION

Guitar input is available in all modes. You can play over music as a backing track, or simply play

while music playback is stopped.

1. Connect your guitar to the 6.3mm Guitar input jack [18] found on the front of the

unit.

2. Press the G.VOL + button [15] or the G.VOL - button [16] to increase or decrease

the Guitar input level.

MM275

SPECIFICATIONS

GENERAL

Power Requirement .............................................................................. AC100-240V -60/50Hz

DC 15V UM-1 (D-Size) x 10pcs

Power consumption ................................................................................................... 65 Watts

Dimensions .............................................................................. 219(D) x 660(W) x 224 (H) mm

Operation temperature ...................................................................................... +5°C – +35° C

RECEIVER SECTION

Receiving Bands ............................................................................................................ FM.ST

Frequency Range .................................................................................... FM: 87.5 – 108 MHz

COMPACT DISC SECTION

Optical Pickup ................................................................................................... 3-Beam Laser

Frequency Response .................................................................................... 100 Hz – 16 KHz

AUDIO SECTION

Power output ........................................................................................................... Total 60W

ACCESSORIES

Instruction Booklet ................................................................................................................. 1

AC Cord................................................................................................................................. 1

Remote Control ……………………………………………………………………………………… 1

Note: Specifications are subject to change for continuous

improvement without prior notice.

MM275

CUSTOMER SERVICE

tel: +48 22 332 34 63 or e-mail: serwis@manta.com.pl

FROM MONDAY TO FRIDAY, IN HOURS: 9.00-17.00

The manufacturer reserves the right to introduce changes

MM275 PL

WAŻNE INFORMACJE

• Dziękujemy za zakup naszego produktu.

• Prosimy o dokładne zapoznanie się z niniejszą instrukcją obsługi, aby

dowiedzieć się, jak prawidłowo obsługiwać zakupiony sprzęt. Zaleca-

my, aby po przeczytaniu instrukcji odłożyć ją w bezpieczne miejsce i

umożliwić skorzystanie z niej w przyszłości

UWAGA

•

Użytkowanie elementów sterowania bądź regulacyjnych innych, niż

opisane w instrukcji, lub wykonywanie procedur, które nie zostały

przedstawione w tym dokumencie, może spowodować narażenie na

działanie groźnego promieniowania

NIEBEZPIECZEŃSTWO

Ten odtwarzacz płyt kompak-

towych jest klasykowany jako

PRODUKT LASEROWY klasy 1.

Etykietę oznaczającą PRODUKT

LASEROWY KLASY 1 umieszczo

no z tyłu urządzenia.

UWAGA

•

Producent nie będzie ponosił odpowiedzialności za jakiekolwiek

zakłócenia radiowe lub telewizyjne spowodowane dokonywaniem

samodzielnych zmian w urządzeniu.

• Należy unikać ustawiania urządzenia w niżej opisanych miejscach:

• Narażonych na bezpośrednie działanie promieni słonecznych lub

położonych w pobliżu źródeł ciepła, np. grzejników elektrycznych

lub innych urządzeń wytwarzających duże ilości ciepła.

• Narażonych na stałe oddziaływanie drgań.

• Nieprzewietrzanych lub zapylonych.

• Wilgotnych lub mokrych.

MM275 PL

• Przycisków i przełączników/wyłączników należy używać zgodnie z

opisem w instrukcji obsługi.

• Przed włączeniem urządzenia po raz pierwszy należy sprawdzić, czy

przewód zasilający jest prawidłowo podłączony.

• Urządzenie należy przechowywać w chłodnym miejscu, aby uniknąć

uszkodzeń w wyniku oddziaływania ciepła

•

UWAGA

• ABY OGRANICZYĆ RYZYKO PORAŻENIA PRĄDEM ELEKTRYCZNYM,

NIE NALEŻY ZDEJMOWAĆ POKRYWY (LUB TYLNEJ STRONY OBUDO-

WY). NIE OTWIERAĆ URZĄDZENIA. W RAZIE KONIECZNOŚCI DOKO-

NANIA NAPRAW, PROSIMY ZWRÓCIĆ SIĘ DO WYKWALIFIKOWANEGO

SERWISU.

OSTRZEŻENIE

• Baterie należy wyjąć z urządzenia, jeśli są zużyte lub urządzenie nie

będzie używane przez dłuższy czas.

• Niewłaściwe używanie baterii grozi wylaniem elektrolitu i wywo-

łaniem korozji elementów wewnętrznych lub wybuchem baterii,

dlatego:

• Nie należy używać jednocześnie baterii różnego typu, np. alkalicz-

nych razem z cynkowo-węglowymi.

• Przy wymianie należy jednocześnie wymieniać wszystkie baterie

MM275 PL

POŁOŻENIE EMENTÓW STERUJĄCYCH

MM275 PL

1.Wyświetlacz

2.Port USB

3.Komora zdalnego sterowania

4.Przycisk FOLDER/MEM./10+

5.Przycisk FOLDER/MEM./10–

6.Przycisk PROG/P-MODE

7.Gniazdo mikrofonu, 6,3mm

8.Gniazdo AUX IN, 3,5mm

9.Przycisk „+” głośności mikrofonu

10.Przycisk „–” głośności

mikrofonu

11.Osłona głośnika

12.Głośnik prawy/lewy

13.Przycisk NASTĘPNY/DO PRZO-

DU (NEXT/FORWARD )

14.Przycisk PLAY/PAIR

15.Przycisk „+” głośności gitary

16.Przycisk „–” głośności gitary

17.Gniazdo słuchawkowe, 3,5mm

18.Gniazdo gitary, 6,3mm

19.Przycisk PREVIOUS/REVERSE

20.Pokrętło głośności (VOLUME)

21.Pokrętło strojenia (TUNING)

22.Przycisk STOP

23.Przycisk ID3

24.Antena teleskopowa

25.Przycisk EQ

26.Przycisk podświetlania (LIGHT)

27.Przycisk funkcji (FUNCTION)

28.Przycisk zasilania (POWER/

STANDBY)

29.Lewy/prawy subwoofer

30.Pokrywa komory baterii

31.Pasek do noszenia

32.Otwory wentylacyjne

33.Gniazdo kabla zasilającego

MM275 PL

1. FUNKCJA

2. WYCISZANIE

3. PAMIĘĆ

4. KOREKTOR GRAFICZNY

5. STZRAŁKI „GÓRA/DÓŁ” FOLDER/ 10/

MEMORY

6. POPRZEDNI/DO TYŁU oraz STROJE-

NIE –

7. ODTWARZANIE / PAUZA

8. P-MODE (tryb odtwarzania)

9. STOP

10. PAIR (powiązanie)

11. NASTĘPNY/DO PRZODU oraz

STROJENIE +

12. ID3 (wyświetla znaczniki MP3)

13. ZWIĘKSZANIE I ZMNIEJSZANIE

GŁOŚNOŚCI

14. ŚWIATŁO

15. TRYB GŁOŚNOŚCI

16. GOTOWOŚĆ (ZASILANIE)

17. Nadajnik podczerwieni

18. Pojemnik baterii

PILOT ZDALNEGO STEROWANIA

Uwaga: Przed włożeniem baterii po raz pierwszy zdjąć z baterii folię

MM275 PL

OBSŁUGA PILOTA ZDALNEGO

STEROWANIA

Chcąc sterować urządzeniem z pilota zdalnego

sterowania, skieruj nadajnik podczerwieni [17] pilota

w stronę czujnika podczerwieni na płycie przedniej

radioodtwarzacza. Korzystaj z pilota poprzez naciskanie

jego przyciskówPilot zdalnego sterowania działa

najlepiej w odległości nie większej niż 20 do 23 stóp

(6 do 7 m) oraz w zakresie kąta 30 stopni w obie strony

względem czujnika. Światło słoneczne lub silne

oświetlenie pomieszczenia mogą zakłócać działanie

zdalnego sterowania. Jeśli zdalne sterowanie jest

utrudnione lub nie działa w ogóle, spróbuj wymienić

baterie na nowe lub przyciemnić pomieszczenie.

WYMIANA BATERII W PILOCIE ZDALNEGO STEROWANIA

•

W pilocie zdalnego sterowania znajduje się jedna

bateria litowa typu CR2025 (3V). Przed użyciem

pilota po raz pierwszy zdejmij folię ochronną z

pojemnika baterii.

• Aby wymienić baterię, lekko przesuń zatrzask w

prawą stronę i wysuń szuadkę pojemnika baterii.

Wyjmij zużytą baterię i włóż do szuadki nową

baterię litową (typu CR-2025). Biegun dodatni

baterii powinien być skierowany do góry.

•

Wsuń z powrotem szuadkę do pojemnika baterii

aż do zaskoczenia zatrzasku.

Strona jest ładowana ...

Manta MM275 Instrukcja obsługi

Marka: Manta

Model: MM275

Kategoria: Odtwarzacze CD

Typ: Instrukcja obsługi

ściągnij PDF

raport

w innych językach

English: Manta MM275 User manual

Manta MM275 Instrukcja obsługi

Manta MM275 Instrukcja obsługi

w innych językach

Inne dokumenty