Pulsar SF108-CRB Instrukcja obsługi
- Kategoria
- Przełączniki sieciowe
- Typ
- Instrukcja obsługi
SF108-CRB v.1.0/II
SF108-CRB 10-ports switch with buffer power supply
and recorder in recorder space.
for 8 IP cameras
CODE
TYPE
:
:
DESCRIPTION
The SF108-CRB is dedicated for uninterruptible power supply of 8 IP cameras (48VDC power supply) and
uninterruptible power supply of the DVR (12VDC power supply). In addition, the large size of the enclosure allows
installing the recorder inside.
The main elements of this system include:
- 10 ports PoE (SF108) switch
- buffer power supply unit 27,6V (PSB-30024100) which can accommodate two 2 x 17Ah / 12V batteries
- a converter (DC/DC48250) increasing the voltage to 48VDC (supply of the PoE switch)
- step down (DC/DC50SD) converter with adjustable output voltage to 12VDC (DVR power supply)
In case of power decay, a battery back-up is activated immediately.
Automatic detection of any devices powered in the PoE standard is enabled at the 1 - 8 ports of the switch.
The G1/TP, G2/TP ports is used for connection of another network device via RJ45 connector. The switch is fitted with SFP
slots; the use of fiber optic module (GBIC) allows fiber optic transmission. The LEDs at the front panel indicate the
operation status.
The switch is housed in a metal enclosure (color RAL 9003) which can accommodate a two 17Ah/12V batteries.
The enclosure features a micro switch tamper indicating door opening (front panel). The SF108-CRB is fitted with two
LEDs on the front panel (red LED – indicates 230VAC power supply of the PSU, green LED indicates the presence of DC
voltage).
The PoE technology ensures a network connection and reduces installation costs by eliminating the need to
supply a separate power cable for each device. This method allows supplying other network devices, such as IP
phone, wireless access point or router.
The approximate backup time is given assuming that all output ports are used (using typical devices and 17Ah
batteries). The electricity consumption for own needs and the energy efficiency of the power intake track were taken into
account. The exact description of how to perform the calculations can be found at:
.
"Approximate backup time -
assumptions for calculations"
EN**
wyjście TAMPER : przewody 30cm
Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: sales@pulsar.pl
SF108-CRB 10-ports switch with buffer power supply
for 8 IP cameras and recorder in recorder space
Features:
· Uninterruptible power supply of 8 IP cameras (48VDC)
· Uninterruptible power supply of the recorder (12VDC)
· Switch 10 ports
8 PoE ports 10/100Mb/s, (1÷8 ports) (data and power
supply)
2 ports 10/100/1000Mb/s (G1/TP, G2/TP ports)
(UpLink)
2 ports 10/100/1000 Mb/s SFP (G1/SFP, G2/SFP ports)
· 15,4W for each PoE port, supports devices complaint
with the IEEE802.3af standard
· Approximate backup time: 3h 25min
· LED indication
· Additional mounting elements (straps for mounting
the recorder)
· Metal enclosure – color white RAL 9003
with space for two 17Ah/12V battery and offers
the possibility of recorder installation
· Supports auto-learning and auto-aging of MAC
addresses (1K size)
· Space for a recorder with the following dimensions
320x380x65 (WxHxD)
· warranty – 2 year from the production date
Pulsar
®
W
H
D
W
1
H
1
D
1
Recorder space
W x H
2 2
D
2
wyjście TAMPER : przewody 30cm
Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: sales@pulsar.pl
PARAMETERS OF THE SWITCH
Ports
8 x PoE (10/100Mb/s) (RJ-45)
2 x UPLINK (10/100/1000Mb/s) (RJ-45)
2 x UPLINK (10/100/1000Mb/s) (SFP)
with connection speed auto-negotiation and MDI/MDIX Auto Cross)
PoE power supply
IEEE 802.3af (1÷8 ports), 48V DC / 15,4W at each port *
Used pairs 4/5 (+); 7/8 (-)
Protocols, Standards
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
Forwarding rate
10BASE-T: 14880pps/port
100BASE-TX: 148800pps/port
Bandwidth
1,6Gbps
Transmission method
Store-and-Forward
Optical indication of
operation
Switch power supply;
Link/Act;
PoE Status
Mains supply
176÷264V AC
Current up to
1,1A@230VAC max.
Supply power
185W
Output current at the PoE ports (RJ45)
8 x 0,3A ΣI=2A (max.)
Output voltage at the PoE ports (RJ45)
48VDC
Output current (power supply output)
5A
Output voltage (power supply input)
12VDC
Short-circuit protection SCP and
overload protection OLP
105% ÷ 150% PSU power, automatic recovery
(the fault requires disconnection of the DC output circuit)
PSU current consumption
250mA/27,6V
Battery charge current
1,0A max. /2x17Ah (+/-5%)
Approximate backup time
3h 25min
Battery circuit protection SCP and
reverse polarity connection
melting fuse
Deep discharge battery protection UVP
U<19V (± 5%) – disconnection of the batteries
Sabotage protection:
- TAMPER output indicating enclosure
opening
- microswitch, styki NC (obudowa zamknięta),
0,5A@50V DC (max.)
* The given value of 15,4W per port is the maximum value. The total power consumption should not exceed 96W when all PoE ports
are being used.
ELECTRICAL PARAMETERS
MECHANICAL PARAMETERS
Dimensions
W=421, H=535, D+D
1
=193+14 [+/- 2mm]
W
1
=426, H
1
=540 [+/- 2mm]
The dimensions of the recorder
compartment
W
2
=380, H
2
=320, D
2
=65 [+/- 2mm]
The dimensions of the battery
compartment
370x180x80 (WxHxD)
Gross/Net weight
11,2 / 12,0 kg
Enclosure
Steel plate, DC01 1,0mm color white RAL 9003
Closing
Cheese head screw x 2 (at the front), (lock assembly possible)
Connectors
Power supply of the cameras: RJ45 socket
Power supply for recorder: DC2,1/5,5 plug
Input 230VAC: Φ 0,63-2,50 (AWG 22-10),
Battery output BAT: 6,3F-2,5
TAMPER output: wires
Warranty
2 year from the production date
Notes
The enclosure does not touch the assembly surface so that cables can be led.
SF108-CRB 10-ports switch with buffer power supply
for 8 IP cameras and recorder in recorder space
Pulsar
®
-
1
-
2
Pulsar SF108-CRB Instrukcja obsługi
- Kategoria
- Przełączniki sieciowe
- Typ
- Instrukcja obsługi
w innych językach
Powiązane dokumenty
-
Pulsar RSG64 Instrukcja obsługi
-
-
-
-
-
-
-
-
-