KJB Security 007-DVR150WF Instrukcja obsługi

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

Wi-Fi USB Charger DVR Manual

Table of Contents

Warnings & Precautions

2

Includes

4

Quick Setup Guide

5

Features

6

Setup

6

Zone Shield EZ Menu and Settings

16

Playback

19

Frequently Asked Questions

20

Specifications

22

Warranty & Disclaimers

23

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

****IMPORTANT****

****SECURITY ADVISORY****

****READ BEFORE SET-UP****

The set-up procedure for your new Wi-Fi Camera System uses a default Username and

Password provided to you from the manufacturer. After you have completed the set-up

procedure for your new Wi-Fi Camera System it is essential that you immediately change

both the Username and Password to a unique name and code of your choosing. Failure

to change both the Username and Password will severely compromise the security and

privacy for your Wi-Fi Camera System.

**WARNING** THE DEFAULT USERNAME AND PASSWORD IS FOR

MANUFACTURING TESTING AND FIRST-TIME SET UP ONLY! IT IS NOT

UNIQUE TO YOUR DEVICE OR INTENDED FOR USE AS A PRIVATE SECURE

PASSWORD. FAILURE TO CHANGE FROM THE DEFAULT FACTORY

SUPPLIED USERNAME AND PASSWORD EXPOSES YOU TO

UNAUTHORIZED ACCESS AND VIEWING OF YOUR WI-FI DEVICE!

The internet is a public place and if you do not change the Username and Password, but

continue to use the default Username and Password, you are risking your privacy! There

is great potential risk that unauthorized individuals could access your video. It is your

responsibility and the User in Control to maintain the privacy and security of your content

when using this or any Wi-Fi devices.

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

EU Environmental Protection

The symbol of crossed-out garbage shows that this product should not be treated as

household waste, as it falls into the category of electric/electronic equipment for

recycling. This electronic device should not be disposed of in regular trash. We

strongly advise you to contact your local authority for proper disposal of this product.

Do not bring the device suddenly from a hot to a cold place, or vice versa. This may

cause damage to the inside of the unit by creating condensation.

Protect from high temperatures. To avoid mis-operation of the device, only use in

temperature of 0 ~ +40°C(32 ~ 104°F).

Protect from humidity. Do not put it in water and be careful to protect it from rain,

sea water, or high humidity environment. Do not operate the unit near a bath tub,

shower, sink, swimming pool, etc.

Do not open/modify the device, as it may cause damage to the unit and void the

Warranty. For internal repairs, consult your dealer or an Authorized Service Center.

Do not use any accessories or power supplies other than what comes with the device,

otherwise it could void the warranty

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

Includes

 Wi-Fi AC Adaptor with Camera

 Card Reader

 Reset Pin

 User Manual

1. Hidden Camera and IR’s 4. LED Light Indicator

2. USB Charge Port 5. Micro Memory Card Slot

3. Pinhole Reset Button 6. UID / QR Code

1

…

...

2

3

5

6

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

Introduction

With the Zone Shield EZ Wi-Fi hidden camera you will be protecting your most valuable assets

in minutes. There are a couple of things you should do before you get started. First, read the

whole manual first, as this makes setting up your device quick and easy. Next, understand what

you need to connect your device. Follow the steps in order to avoid any issue. If you do have any

questions, feel free to look at our FAQs or call us, as we are always happy to help.

Understanding how to connect the Zone Shield EZ Wi-Fi hidden camera: First download our

App “Zone Shield EZ” from the App Store or Google Play Store. Next, your smart device has to

connect to the camera’s Wi-Fi network, called Wi-Fi Direct(P-P), which is a Wi-Fi standard

enabling devices to easily connect with each other without requiring a wireless access

point/router. With this connection, you can go anywhere within range of the AC Adaptor with

your smartphone or tablet and view the video in the app. To view from anywhere away from

your home/office, you have to connect the camera to a wireless access point/router(P-I). Once

setup, you can view your video from the app wherever you are, at any time.

As with all wireless devices, it takes a little patience and a good, strong Wi-Fi signal to run video

over a network. Keep in mind, we do not know your Wi-Fi environment and cannot test every

router or smart device made, so it’s up to you, the user, to meet the minimum requirements

needed to run this device.

Quick Setup Guide

1. Remove the bottom cover to insert the memory card (see pg. 4) and plug the AC Adaptor

into an electrical outlet.

2. Download and install the “Zone Shield EZ” App from the App Store or Google Play to

your smartphone or tablet.

3. On your smartphone or tablet, go to your list of available Wi-Fi networks and connect to

the “CM****-************-******” Wi-Fi network.

4. Open the “Zone Shield EZ” App. Press the + symbol in the top right corner, then press

the “Search (LAN)” button in the middle of the next screen. Tap on the camera name in

the search results list to select it, which will return you to the previous screen. Press “OK”

to add the camera to the app. You are now directly connected (P-P) and the camera will

show “Online”. As long as your smart phone or tablet is in range of your Wi-Fi signal, you

will see streaming live video. For remote viewing over the internet, follow step 5 below.

5. Press the symbol to the right of the camera in the camera list. Press “Advance

Config” and then “Wi-Fi Config” in the menus. Select your local Wi-Fi network from the

dropdown box and type in your password. Press “OK” to save the credentials, then press

“OK” again to confirm and send them to the camera. The camera will reboot and take 1-2

minutes to come back online. Once the camera reboots, it is now ready for live viewing.

Be sure to change the default password to a unique password.

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

Features

 High-definition camera

 IR’s for help to see in the dark (camera will be in black and white when this feature is used)

 1080p | 720p | 640 | 320 resolution recording

 Supports up to 32GB memory card storage, for up to 8 hours of video recording

 2 recording modes - Continuous or Motion detection

 Time and Date video stamp

 5V USB output, 500mA max

 25 fps

Setup

Zone Shield EZ App Installation

Search for the “Zone Shield EZ” App in the App Store (iOS) or Google Play Store

(Android) and install it on your smart phone or tablet.

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

Adding Your Camera

To connect your camera to your smart device for direct connect (P-P) viewing:

1. Remove the bottom cover to insert the memory card (see pg. 4) and plug the AC Adaptor

into an electrical outlet.

2. Download and install the “Zone Shield EZ” App from the App Store or Google Play to

your smartphone or tablet.

3. On your smartphone or tablet, go to your list of available Wi-Fi networks and connect to

the “CM****-************-******” Wi-Fi network. It may take 1-2 minutes for the

network to appear in your network list.

4. Open the Zone Shield EZ App. Press the + symbol in the top right corner.

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

5. Press “Search (LAN)” button.

6. Tap on the camera name in the search results list to select it, which will return you to the

previous screen.

7. Press “OK” to add the camera to your main camera list. The camera will show “Online”,

and you are in P-P (direct connect) mode.

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

Note: After successful connection, IT IS HIGHLY RECOMMENDED FOR SECURE

VIEWING YOU CHANGE YOUR CAMERA NAME AND PASSWORD ON THE APP (see

pg.18 for detailed instructions). If you see a camera status saying “Wrong Password”, make sure

your UID and Password are correct.

Connecting Your Camera to Your Wi-Fi Network

To connect your camera to your home Wi-Fi network:

1. Press the symbol to the right of the camera in the camera list.

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

2. Press “Advance Config”.

3. Press “Wi-Fi Config”.

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

4. Select your wireless network from the dropdown box, then enter it’s password in the box

below. Press “OK” to save the credentials.

5. Press “OK” again to confirm and send the credentials to the camera. Allow 1-2 minutes for

the camera to reboot and come online.

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

Add Your Camera to Another Smart Device – 2 Methods

Method 1: Adding the Camera to a Second Smart Device on Same Local Network

1. Open the Zone Shield EZ App. Press the + symbol in the top right corner.

2. Press “Search (LAN)” button.

3. Press the camera name in the search results list to select it, which will return you to the

previous screen.

4. Press “OK” to add the camera to your main camera list. The camera will show “Online”,

and you are automatically in P-I (Wi-Fi network) mode.

Method 2: Adding the Camera to a Second Smart Device on Different Networks

1. Open the Zone Shield EZ App. Press the + symbol in the top right corner.

2. Fill in the camera UID and Password (8888 by default) manually.

3. Press “OK” to add the camera to your main camera list. The camera will show “Online”,

and you are automatically in P-I (Wi-Fi network) mode.

Note: Please refer to pg. 7 for related screenshots.

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

Live Video

To access the Live View screen, press the icon in the top right corner of the Live

Video tab.

Camera Name

Camera Settings

Camera UID

Camera Status/

User Number

Snapshot: View

Snapshot Pictures

Record: View

Recorded Videos

Alarm: View

Triggered Alarms

Resolution

Brightness

Contrast

Audio

(Law Enforcement/ Export Only)

Snapshot

Record

Horizontal

Image

Rotation

Vertical

Image

Rotation

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

Night Vision

Manual Night Vision IRs, turned on via App by selecting LED icon. LEDs will remain on

and picture will be black & white until turned off.

Snapshot

To access your Snapshots, press on the Snapshot tab on the bottom.

Press on the icon in the top right corner to filter Snapshots by camera name.

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

Scroll through the slideshow on the bottom of the page to see all of your available

Snapshots. Select the one you want to see and it will enlarge.

Record

To access and Playback your recorded video files, see pg. 20.

Alarm

To access your triggered alarms, press the Alarm tab on the bottom of the screen.

Press on the icon in the top right corner to filter Snapshots by camera name.

When an alarm is triggered, it will take a series of pictures to go along with it. Scroll up

and down the page to see all triggered alarms. See pg. 19 for alarm setup.

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

Zone Shield EZ Menu and Settings

To access all of the camera settings, press the icon on the camera you want to access

settings while in the Live Video tab.

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

Modify Camera

Press “Modify Camera” to change the name of your camera. The default name is “Cam”.

Delete Camera

Press “Delete Camera” to delete your camera and take it off of the camera list.

Note: There is no confirmation pop-up when deleting. Once you press “Delete Device”, it

is taken off of the list. However, adding the device back on, if accidentally deleted, is

simple. See pg. 12 add the camera back to your smart device.

Reconnect

Press “Reconnect” to re-establish the P-P or P-I connection. It will also function as a

“refresh” button, and will update status and users.

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

Device Settings

Press “Alarm Config” to set up motion alarms and push notifications.

Press “Wi-Fi Config” to select a new Wi-Fi network for your camera.

Press “SD Card Record Config” to adjust the settings for your SD card and recorded files.

Press “Time Settings” to time format, current time, time zone, and select Daylight Savings

Time.

Press “Email Config” to set up an email for alarms to be sent to.

Press “FTP Config” for advanced FTP server settings.

Press “DDNS Config” for advanced DDNS server settings.

Press “Misc Settings” to select how you want the LEDs on your camera to flash (On, Off,

or Flicker).

Press “Change P-P Access Password” to change the P-P password (8888) for the camera.

Press “Device Reboot” to restart the camera back to the default settings.

Note: For the full manual with detailed setting configuration and setting menus, please visit:

www.kjbsecurity.com/technical-support/docs

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

Playback

There are two ways to playback recorded video files: from the memory card or from your

smartphone or tablet.

Smartphone/ Tablet

1. From the camera list, press the icon on the bottom of the screen to go to the Record

tab.

2. Select the source for the video files in the dropdown box: Remote SD Card or Downloaded.

You can also see the video files currently downloading and files on the local network.

3. Press on the video file you want to watch. You can also press and hold on a video file

while on the Remote SD Card to download the file to your smart device.

4. Press on the icon in the top right corner to filter video files by camera name.

KJ B S ecurit y P r o d u c t s | www. kjbs ecurity. co m | 80 0 . 5 9 0 . 4 2 7 2

Memory Card

1. Stop any recording of video files, then remove the camera from the power outlet.

2. Format the SD card before 1

st

use.

3. Place the memory card into an adapter or card reader for a computer.

4. Navigate to the recorded video files in the root directory.

5. Use a media player such as Windows Media Player or VLC Media Player to playback the

video files.

6. Backup, save, or delete the files as desired.

7. Use the computer’s “safe remove” function to safely eject the memory card from the

operating system prior to physically removing the memory card from the computer to

prevent file or card corruption.

Frequently Asked Questions

Q. Where can I find more info on settings and configuration?

A. Please download and read our full manual for more detailed settings configuration and menus.

You can get the manual at: www.kjbsecurity.com/technical-support/docs

Q. Where can I find more info on settings and configuration?

A. Please download and read our full manual for more detailed settings configuration and menus.

Q. I can’t find the Wi-Fi signal on my smartphone/tablet?

A. There are 3 things that can be done to restart the Wi-Fi signal:

1. Unplug the adaptor from the wall outlet and plug back in. Wait 2 minutes for reboot.

2. Press and hold the reset button. Wait 2 minutes for reboot.

3. Turn off the smartphone/tablet Wi-Fi function for a minute and turn back on to search

again.

Q. What size memory cards can I used in this device?

A. Most memory cards, of up to and including 32GB capacity, are supported. If a memory card

does not appear to work, try removing and formatting the memory card using a computer before

trying it in the device again.

Q. Why did I not get a recording when I know there was motion in front of the device?

A. The motion was not detected because it was too little, too quick or too far away. Make test

recordings to discover the limits of detection in your given placement and environment.

Strona jest ładowana ...

KJB Security 007-DVR150WF Instrukcja obsługi

KJB Security 007-DVR150WF Instrukcja obsługi

w innych językach

Inne dokumenty