Fieldmann FDV 10351-A Instrukcja obsługi

FDV 10351-A

CORDLESS DRILLS OPERATING INSTRUCTIONS

EN 4

FDV 10351-A

CORDLESS DRILLS OPERATING INSTRUCTIONS

Contents EN

5

ILLUSTRATED ATTACHMENT .............................................................................................................................. 3

1. GENERAL SAFETY REGULATIONS ................................................................................................................. 6

Important safety notices

Packaging

Operating instructions

2. SYMBOLS ................................................................................................................................................................ 11

3. MACHINE DESCRIPTION AND INCLUDED CONTENTS ....................................................................... 12

Machine description

Supplied contents

4. PUTTING INTO OPERATION ............................................................................................................................. 12

Charging the machine

Drill chuck

Torque control

Turning on/off

5 INSTRUCTIONS FOR PROPER USE ...................................................................................................................14

Screwing

Drilling

LED Battery charge level indicator light

Lighting of the working area

Overload

More advice about drilling

6. OPERATING INSTRUCTIONS .............................................................................................................................15

Operation

Purpose of use

Instructions for use

Electrical safety

Safety instructions for the battery and charger

7. MAINTENANCE AND STORAGE .....................................................................................................................19

Maintenance

Storage

8. TECHNICAL SPECIFICATIONS ...........................................................................................................................21

9. DISPOSAL ................................................................................................................................................................. 22

10. ES DECLARATION OF CONFORMITY .............................................................................................................. 23

EN 6

General safety instructions

1. GENERAL SAFETY INSTRUCTIONS

WARNING! Carefully read the instruction manual before use.

Important safety warnings

Unpack the product carefully and be sure not to throw away any part of the package before

having found all components of the product.

Keep the product in a dry place out of reach of children.

Read all cautions and instructions. The failure to adhere to warning cautions and instructions

may result in an accident, ﬁre and/or a serious injury.

Packaging

The product is placed in a package preventing damage during transport. This package is a raw

material therefore it can be handed-over for recycling.

Instructions for use

Before beginning to work with the machine, read the following safety rules and instructions for

use. Familiarize with operating elements and the proper use of the device. Keep the manual in a

safe place for future reference. We recommend keeping the original package including the inner

packaging materials, cash voucher and guarantee card for a period of warranty at minimum.

For a case of transportation, pack the machine into the original box from the manufacturer,

thus ensuring a maximum protection of the product during a possible transport (e.g. moving or

sending into a service station).

Note: If you hand the machine over to next persons, hand it over together with the manual.

Adherence to the attached instructions for use is a precondition for the proper use of the

machine. The operation manual includes also instructions for operation, maintenance and

repairs.

The manufacturer does not take any responsibility for accidents or damages

resulting from the failure to adhere to this manual.

FDV 10351-A

EN

CORDLESS DRILLS OPERATING INSTRUCTIONS

7

General safety instructions

GENERAL SAFETY INSTRUCTIONS

Carefully read, remember and keep these safety instructions

WARNING! In the use of electric machines and power tools, it is necessary to respect

and follow the following safety instructions for the reasons of protection against electric

shock, personal injury and danger of ﬁre. The term “power tool” in the instructions below

refers both to mains-operated (corded) power tool or battery-operated (cordless) power tool.

Save all warnings and instructions for future reference.

Workplace

Keep the work area clean and well lit. Cluttered or dark areas in the workplace invite

accidents. Store power tools that you don’t currently use.

Do not operate power tools in environments with danger of occurrence of a ﬁre or explosion,

such as in the presence of ﬂammable liquids, gases, or dust. Power tools create sparks

which may ignite the dust or fumes.

Keep unauthorised persons, especially children, away from the work area while operating

a power tool! Distractions can cause you to lose control over the performed activity. In no

event leave your power tool unattended. Keep the equipment away from animals.

Electrical Safety

Power tool plugs must match the mains socket outlet. Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded) power tools. Undamaged plugs and

matching outlets will reduce risk of electric shock. Damaged or fouled supply cables increase

the risk of electric shock. If the power cord is damaged, it must be replaced by a new power

cord which is available at the authorised service centre or the importer.

Avoid body contact with earthed or grounded surfaces such as pipes, radiators, cooking

ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or

grounded.

Do not expose power tools to rain or wet conditions. Never touch the power tool with wet

hands. Never wash the power tool under running water or immerse it in water.

Never use the supply cable for other than intended purposes. Never use the cord for carrying

or pulling the power tool. Never unplug the plug from the outlet by pulling the cable. Keep

electric cables away from sharp or hot objects to prevent mechanical damage.

The power tool was designed to be powered solely by alternating electric current. Always

check if the electric voltage matches the information speciﬁed in the type label of the power

tool.

Never use power tool with damaged electric cable or plug or which has been dropped or is in

any way damaged.

EN 8

General safety instructions

If an extension cord is used, always check whether its technical parameters match the

information speciﬁed in the type label of the power tool. When operating a power tool

outdoors, use an extension cord suitable for outdoor use. If extension drums are used, these

must be rolled out to prevent overheating of the cord.

If a power tool is operated in a damp location or outdoors, its operation is only permitted if

connected to an electric circuit protected by a residual current device <30 mA. Use of residual

current device (RCD) reduces the risk of electric shock.

Hold the power tool by insulated gripping surfaces only as the cutting or drilling tool may

contact hidden wiring or its own power cord during operation.

Personal Safety

Be careful, stay alert and watch what you are doing when operating a power tool.

Concentrate on your work. Do not use a power tool while you are tired or under the inﬂuence

of drugs, alcohol or medication. A moment of inattention while operating power tools may

result in serious personal injury. Do not eat, drink and smoke while operating a power tool.

Use personal protective equipment. Always wear eye protection. Use protective equipment

corresponding to the type of work you are doing. Protective equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection used in accordance with the working

conditions will reduce the risk of personal injury.

Prevent unintentional starting. Do not carry the power tool while it is energised or with

your ﬁnger on the switch or trigger. Ensure the switch or trigger is in the “off” position before

connecting to power source. Carrying power tools with your ﬁnger on the switch or energising

power tools that have the switch on may result in serious injuries.

Remove any adjusting key or wrench before turning the power tool on. An adjusting wrench or

a key left attached to a rotating part of the power tool may result in personal injury.

Keep proper footing and balance at all times. Do not overreach. Never overestimate your own

capabilities. Never use power tools while you are tired.

Dress properly. Wear work clothes. Do not wear loose clothing or jewellery. Keep your hair,

clothing, gloves and other part of your body away from moving or hot parts of the power tool.

Connect the equipment to dust exhaustion. If the tools are provided for the connection of dust

collection or exhaustion devices, ensure these are properly connected and used. Use of such

devices can reduce dust-related hazards.

Fix the work-piece tightly. Use a cabinet clamp or a cramp to ﬁx the work-piece you are about

to machine.

Never use power tools if you are under the inﬂuence of alcohol, drugs, medication or other

narcotic or addictive substances.

This equipment is not intended for use by persons (including children) with limited physical,

sensual or mental capacities or lack of experience or knowledge unless they are supervised

or instructed about the use of the equipment by a person responsible for their safety. Children

must be supervised to make sure they are not playing with the equipment.

FDV 10351-A

EN

CORDLESS DRILLS OPERATING INSTRUCTIONS

9

General safety instructions

Power Tool Use and Maintenance

Always disconnect the power tool from the mains in case of any problem during the work,

before cleaning the power tool or its maintenance, during each transportation and after the

completion of the work! Never operate a power tool if it is damaged in any way.

Immediately stop working if the power tool generates abnormal noise or smell.

Do not overload the power tool. The power tool will operate better and safer if it is used at the

rate for which it was designed. Use correct power tool which is intended for the given activity.

The correct power tool will do the job it was designed for better and safer.

Do not use the power tool if it cannot be safely turned on and off using the control switch.

Use of such power tool is dangerous. Defective switches must be repaired by a certiﬁed

service provider.

Disconnect the tool from the power source before making any adjustments, changing

accessories or maintenance. Such preventive safety measure prevents the risk of starting the

power tool accidentally.

Store idle power tools out of the reach of children and unauthorised persons. Power tools can

be dangerous in the hands of untrained users. Store the power tools in a dry and safe place.

Keep the power tool in good condition. Check the adjustment of moving parts and their

mobility. Check for any damage to the protective guards or other parts which could affect

safe operation of the power tool. If damaged, have the power tool properly repaired before

further use. Many accidents are caused by poorly maintained power tools.

Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting

edges facilitate work, reduce the risk of injury and are easier to control. Use of accessories

other than those speciﬁed in the instructions for use could result in damage to the power tool

and cause injuries.

Use the power tool, accessories and tool bits etc. in accordance with these instructions and

in the manner intended for the particular type of power tool taking into account the working

conditions and the work to be performed. Use of the power tool for purposes other than those

the power tool was intended for could result in hazardous situations.

Use of Cordless Power Tools

Before inserting the battery, make sure the switch is in the “0-OFF” position. Inserting a battery

into a switched-on power tool could result in hazardous situations.

Charge batteries only using the chargers prescribed by the manufacturer. Using a charger

intended for other battery type could result in its damage and occurrence of ﬁre.

Use only batteries intended for particular power tool. Use of different batteries could cause

injury or occurrence of ﬁre.

If the battery is not used, keep it separately from metal objects such as clamps, keys, bolts

and other small metal items which could cause connection of one battery contact with the

other. Short-circuiting the battery could result in injury, burns or occurrence of ﬁre.

EN 10

General safety instructions

Handle the batteries with care. Rough handling could result in leak of chemical substance

from the battery. Avoid contact with such substance and if, nonetheless, any contact occurs

wash the affected area under running water. If eyes get into contact with the chemical

substance seek immediately medical aid. Chemical substance from the battery can cause

serious injuries.

Service

Do not replace parts of the power tool, do not make any repairs or interfere in any way with

the construction of the power tool. Have your power tool repaired by qualiﬁed repair persons.

Any repair or modiﬁcation of the product without our company’s authorisation is

impermissible (it could cause injury or damage to the user).

Always have your power tool repaired in a certiﬁed service centre. Use only original or

recommended replacement parts. This will ensure that your safety and the safety of your

power tool is maintained.

FDV 10351-A

2. SYMBOLS

Read the Instruction Manual

attentively prior to use.

The product complies with the applicable

standards and regulations.

Use earsprotectiove equipment

Thread of jig.

Use eyes protectiveequipment

Use earsprotectiove equipment

EN

11

Symbols

FDV 10351-A

CORDLESS DRILLS OPERATING INSTRUCTIONS

Machine description and included contents | Putting into operation

3. MACHINE DESCRIPTION

AND INCLUDED CONTENTS

Machine description (see pic. 1)

A) Keyless chuck

B) Torque setting ring

C) Rotation direction switch for movement forward/back and neutral position safety switch

D) Trigger switch

E) Handle

F) Battery charge level LED display

G) Battery

H) 2 speed switch

Machine description (see pic. 2)

1) Battery adapter

2) Battery

Supplied contents

Carefully take the machine out of the packaging and check whether all the following parts are present:

Cordless drill with battery

Battery charger station

User's manual

If there are parts missing or they are damaged, please contact the vendor from whom you bought the machine.

4. PUTTING INTO OPERATION

Charging the machine

Proceed step by step according to the user's manual and use the pictures as a guide so that the assembly

process is as easy as possible.

1. Take the battery out of the machine, press the release button and pull down to remove the battery.

2. Place the charger on a table near a power socket.

3. Properly insert the battery into the charger.

Note: The battery may be inserted into the charger only in one way.

4. Connect the charger power cord to a power socket. At this time both the red and the green indicator light will

be on.

EN 12

I) Lighting of the working area

Putting into operation

5. As soon as the battery is fully charged, the green indicator light will stay on and the red indicator light will

turn off.

6. After fully charging, disconnect the charger from the power socket. Before fi rst use the battery must be fully

charged.

For the first charge, it is recommended to charge the batter for 3 -5 hours.

Drill chuck (see pic. 3)

If you wish to open up the drill chuck, hold the rear part of the chuck and turn the front part of the chuck

anticlockwise. Insert the desired tool into the chuck. When tightening turn the front part of the chuck (while

holding the rear part) clockwise and ensure that the jaws of the chuck fi rmly and evenly clamp the working tool.

Torque control (see pic. 4)

1. Torque control is ideal for presetting screwing strength. There are 15 positions + 1 drilling position. These

positions are selected by turning the setting ring. Low values are intended for small screws and soft

materials. High values are intended for large screws and hard materials.

2. If the torque control is used the clutch will work in the preset setting. This is ideal for repeat screwing, when

all screws need to be screwed in at the same distance.

3. It is appropriate to start with the lowest setting and increase the amount of torque until the desired setting is

achieved.

Turning on/off (see pic. 5)

ATTENTION: Start or release the start switch carefully according to the manufacturer's instructions.

Turn on the charged machine using the trigger switch (no. 1). Turn off the machine by releasing the switch, the

chuck will stop turning.

1. Ensure that a battery is connected to the tool.

2. Start the tool by pressing the trigger switch.

3. The pressure applied to the power trigger switch determines the operating rotation speed of the chuck. The

higher the pressure exerted on the trigger switch, the higher the rotation speed of the chuck.

4. If you want the chuck to rotate forwards, push the forward/back direction switch (no. 2) to the left. If you want

the chuck to rotate backwards, push the forward/back direction switch to the right..

5. If the drill is not being used, set the forward/back direction switch (no. 2) to the neutral position (in the

middle), to prevent accidentally starting the drill.

Ensure that the bit or extension piece is correctly seated.

The bit/extension piece must be placed directly on the workpiece before the drill is turned on. Otherwise the

workpiece or the bit/extension piece will be damaged.

Always check the rotation direction of the bit before using.

The braking system is activated automatically after the trigger switch is released. The drill chuck will

automatically stop rotating.

EN

13

FDV 10351-A

CORDLESS DRILLS OPERATING INSTRUCTIONS

Instructions for proper use

5. INSTRUCTIONS FOR PROPER USE

Fully charge the battery before fi rst use. Ensure that the used drill bits and extension pieces are designed for

the given task and that they are securely fastened. Check that the direction switch is set in the position for the

desired rotation direction.

NOTE: Always ensure that the battery is removed before changing working tools or before performing

adjustments.

ATTENTION: Dust created during grinding, cutting, drilling and other work tasks may in some

cases contain chemical substances, which are known to cause health problems. Some examples

of these chemical substances are:

a) Lead from lead-containing paints.

b) Cement and other construction products.

c) Chemically treated wood.

Screwing

1. An appropriate opening should be drilled into the workpiece before screws are screwed into wood. This will

prevent the movement of the screw and tool on the surface of the workpiece, which could damage it.

2. We recommend that for screwing you use slow rotation speeds.

3. Insert the screwing bit into the head of the screw and carefully screw it into the opening.

4. We recommend tightening using the lowest torque value and to gradually increase the torque value until the

desired torque level is achieved.

Drilling

1. Do not use the torque control when drilling into wood. Select the standard drilling position.

2. When drilling into wood use wood drilling bits.

3. When drilling into metals or plastics use metal drilling bits.

4. When drilling into soft wood the drill should run at maximum speed.

5. When drilling into hard wood the drill should run at a lower speed.

LED Battery charge level indicator light (see pic. 6)

The LED indicator light is used to show the battery charge level. When the tool is turned on by the trigger switch

the LED light (no. 1) comes on. If all the LED diodes are on, the battery is suffi ciently charged. If only a single LED

diode is on, the battery is virtually fl at and must be charged immediately.

Lighting of the working area (see pic. 5)

The LED lighting (no. 3) is turned on when the trigger button is pressed and lights up the area that is being drilled

or screwed. Turning off the trigger switch also turns off the LED lighting of the working area.

EN 14

Instructions for proper use | Operating instructions

More advice about drilling

1. We recommend to secure the workpiece to the workbench so that you achieve the best results and safely

operate the tool.

2. Use only sharpened drill bits. Blunt drill bits put an unnecessary load on the drill and may cause the motor to

burn.

3. Always ensure that you are using the correct working tool for the task being performed.

4. When performing high precision drilling it is best to use a drill bit with a guiding rod. Non-ferrous materials

like thin metal sheets are very diffi cult to drill. When performing high precision drilling place a piece of wood

underneath the drilled material and then drill an opening through both pieces of material.

ATTENTION: When drilling it is not unusual for the drill bit to jam. In such a case there is a large momentum

reaction. Always pay attention to what you are doing and hold the drill fi rmly to prevent possible damage or

injury.

ATTENTION: Do not hold the trigger button down in the on position using adhesive tape or by other means.

The electrical circuit in the tool would not work correctly, which could lead to overheating and subsequent

damage to the tool.

Overload

If the tool becomes overloaded, the motor may be damaged. Increased pressure on the tool will not result in

speeding up work. The effect of greater pressure on the tool will only lower effectiveness, which may cause the

battery to go fl at prematurely and may also destroy the motor. Non-standard types of work and the effect of

excessive pressure will shorten the operating lifetime of the tool.

6. OPERATING INSTRUCTIONS

Operation

This product must not be used by children and persons with physical or mental impairments or by

inexperienced persons, unless properly trained or schooled in the safe use of the product, or unless they

have been properly supervised by a qualifi ed person who will be responsible for their safety.

Use extra care if the product is used near children. Always keep the appliance out of reach of children.

Children must be supervised to ensure that they do not play with the product.

Never allow children or persons who do not know the contents of this user's manual to work with the device.

Local regulations may set the minimum age of the user. The user is responsible for damages caused to third

parties in the machine's working area as a result of its use.

Do not use the machine if your are tired, under the infl uence of alcohol or narcotics.

If necessary, use personal protection aids (gloves, work footwear, eye protection, respirators, etc.). Personal

protection aids reduce the risk of injury to persons.

Dress appropriately. Do not wear loose clothing or jewellery and make sure that your hair, clothing or gloves

do not come dangerously close to moving parts. Loose clothing, jewellery or long hair may become caught

in the moving parts.

EN

15

FDV 10351-A

CORDLESS DRILLS OPERATING INSTRUCTIONS

Operating instructions

Pay constant attention, watch what your are doing and think when working with power tools. Do not use

power tools if you are tired or under the infl uence of drugs, alcohol or medication. A moment of carelessness

when working with power tools may lead to serious injury.

Prevent the situation where the tool is turned on accidentally. Ensure the trigger switch is in the Off position

before connecting the power cord to the power socket. Carrying power tools with the fi nger on the main

trigger switch or connecting the power cord to the power socket when the main trigger switch is in the On

position may cause injury.

Do not get in your own way. When working, always maintain a fi rm posture and balance. This will make it

possible to better control the power tool in unexpected situations.

Use clamps or a vice to fasten the workpiece. It is safer than holding the workpiece in your hand and at the

same time you have both hands free to operate the tool.

Keep the working area tidy and well illuminated. A cluttered and badly lit work area may lead to injury.

Do not work with the power tool in an explosive environment, such as for example areas where there are fl

ammable liquid, gas or powder substances. Sparks are made inside the power tool, which may cause the

ignition of fl ammable powder or vapour.

Do not work with materials containing asbestos. Use a dust mask.

When working with the tool ensure there is a safe distance from children and other persons. Distractions

may lead to a loss of control over the tool.

Purpose of use

This tool is not designed for professional use.

Do not use the product for purposes other than those intended.

For safety reasons the machine must not be used as a drive engine for any other work tools and tool sets,

unless expressly permitted by the manufacturer.

Instructions for use

Turn on and operate the machine as described in the user's manual, carefully follow all instructions.

Before carrying out any kind of inspection, maintenance or repairs disconnect the charger power cable from

the mains power supply.

Use tools in good working condition for tasks for which they are designed.

Work only during good visibility or ensure suffi cient artifi cial lighting.

Work in a clean and tidy working environment.

Make sure that while working you maintain a fi rm and stable stance. Do not forget that falls represent one of

the major causes of injuries during accidents.

When drilling metal sheets use a vice and place a piece of wood underneath the sheet. A rotating metal sheet

presents a serious risk.

Make sure that the drill or screwdriver are not used for work on items under live current, to prevent injury by

electrical shock. Before using this tool, check that you know the location of all electrical conductors or cables

in the wall (use a metal detector for this purpose).

Only store and use the product away from fl ammable or volatile materials and solutions.

Keep the product away from extreme temperatures, direct sunlight and excessive humidity. Do not use in a

dusty environment.

EN 16

Operating instructions

Do not place the product near heaters, open fi res or other appliances or equipment that are sourcesof heat.

Do not spray the product with water or any other liquid. Do not pour water or any other liquids into the

appliance. Do not submerge the appliance in water or any other liquid.

Never leave the appliance switched on without supervision.

Do not touch machine parts until they have come to a complete stop.

Allow the motor to cool down before storing the machine in a closed room.

Under no circumstances should you repair or alter the product yourself. Entrust all repairs and adjustments of

this product to an authorised service centre or the vendor. Tampering with the appliance during the warranty

period may void the warranty.

The manufacturer is not responsible for damages caused by incorrect use of this product or its accessories.

Such damages include food spoilage, injuries, burns, scalding, fi re, etc.

Electrical safety

ATTENTION: Read all the safety warnings and all instructions. If you fail to follow the provided warnings and

instructions an injury caused by electrical shock could occur as well as fi re or serious injuries.

NOTE: Keep these warnings and instructions for future use. The term "electric power tool" in all warnings

relates to your tool powered from the mains (it has a power cord installed) or cordless tools (without a

power cord).

The charger of the cordless device can be connected to any power plug, preventing discharge, that is

installed according to norms in force.

The plug must be powered at 230V ~50Hz.

Disconnect the charger if you will not be using it for a long time, if you are changing the tool or performing

maintenance on the tool.

The power plug on the tool's charger cord must correspond to the power socket. Never modify the power plug

in any way. Do not use any power plug adapters for tools protected by grounding. Unmodifi ed power plugs

and corresponding power sockets reduce the risk of injury by electrical shock.

Do not touch grounded surfaces such as pipes, heaters, electrical stoves and refrigerators when working

with the machine. When your body is grounded the risk of injury by electrical shock is increased.

Do not expose the electrical tool to rain or a moist environment. The entry of water into the electrical tool

increases the risk of injury by electrical shock.

Handle the power cord with care. Never use the power cord to carry or move the tool and do not pull on it

when you want to disconnect the tool from the power grid. Prevent the tool coming into contact with greasy,

hot and sharp items or moving parts. A damaged or tangled up power cord increases the risk of injury by

electrical shock.

When working with electric power tools in a moist environment, the power circuit must have current

protection installed (RSD - Residual Current Device). The use of a residual current device reduces the risk of

injury by electrical shock.

EN

17

FDV 10351-A

CORDLESS DRILLS OPERATING INSTRUCTIONS

Operating instructions

Safety instructions for the battery and charger

Use only the battery and charger supplied with this tool.

Connect the charger only to a mains power socket with a voltage of 230V.

Protect the battery and charger from moisture. Do not use the device in an outdoor environment.

Disconnect the charger from the mains power socket when the charger is not being used, before cleaning the

charger or before performing repairs on it.

Take special care of the battery. Prevent the battery from falling on to a hard surface and do not expose the

battery to the effects of pressure or other excessive mechanical stress. Keep the battery at a safe distance

from excessive heat or cold.

Do not attempt to repair or disassemble the battery or the charger. If any part is damaged, have it repaired by

a qualifi ed technician or send it for repair to an authorised service centre or the vendor.

Charge the battery only when the ambient air temperature is between 10°C and 40°C. A charged battery

may be used to power tools in operating conditions at a temperature between 0°C and 50°C. If the battery is

not being used store it in a dry place at a temperature between 10°C and 30°C.

IMPORTANT! DANGER! Never short circuit the battery contacts and do not expose the battery to moisture.

Do not store the battery together with metal items and parts, which could cause a short circuit of the battery

contacts. The battery could overheat, catch on fi re or explode.

If any person comes into contact with the electrolyte or another liquid or substance found in the battery, they

must immediately wash this substance away with large amounts of water. If these substances come into

contact with eyes, fl ush the eyes out with large amounts of water and immediately seek medical treatment.

Do not throw rechargeable batteries into a fi re or into water. Otherwise an explosion could occur. A

rechargeable battery should not be thrown out with ordinary household waste, regardless of the fact whether

it has or has not been used. In accordance with valid regulations you should take the battery to a collection

point or put it into the container labelled "Used Batteries" in our store.

Only charge the battery in a charger designated by the manufacturer. A charger appropriate for one type of

battery creates a fi re hazard when used with another type of battery.

Only use the electric power tool with a battery intended to be used in it. The use of different batteries may lead

to a risk of injury or a fi re hazard.

If you are not using the battery, store it away from metal items, such as paper clips, coins, keys, nails, screws

or other small items, which could lead to the short circuit of the battery contacts. Short circuiting the battery

contacts may cause burns or a fire.

EN 18

Mainetance and storage

7. MAINTENANCE AND STORAGE

Maintenance

ATTENTION: Disconnect the charger if you will not be using it for a long time, if you are changing

the tool or performing maintenance on the tool.

This tool does not require any special maintenance. The same applies to the electrical parts of the tool.

Check whether the device is showing signs of wear.

If the charger is damaged (cover, conductors or connector), immediately arrange its replacement at the

vendors service centre.

Regular care for the machine will ensure not only a long lifetime and performance.

Before use always visually check for worn or damaged parts.

Replace damaged or worn parts. To ensure that the machine always remains balanced, always replace the

entire set of the worn or damaged tools.

Worn or damaged machine parts may only be replaced at an authorised service centre or the vendor.

Before cleaning disconnect this product from the power source.

To clean the plastic parts of the product, use a soft cloth dipped in lukewarm water. Do not use aggressive

cleaning products and solvents as this could damage the surface of the appliance.

Do not clean the machine under running water or submerge under water.

After changing the working tool, check that the working tool is secured in its storage position.

Do not use working tools that are not proportioned for placement into the tang in the magazine.

Do not overload the electric power tool. Use the right type of electric power tool for your work. When the

correct electric power tool is used, the work result will be performed better and more safety.

I f it is not possible to turn the main trigger switch on or off, do not work with the tool. All electric power tools

with a trigger switch that do not work are dangerous and must be repaired.

If you are not working with the tool, store it out of the reach of children and prevent persons not informed

about the operation of the tool or this user's manual to work with the tool. An electric power tool in the hands

of an unqualifi ed person is dangerous.

Perform maintenance on the tool. Check for deviation or blockage of the moving parts, damage of individual

parts and other factors which could affect the operation of the tool. If the tool is damaged, have it repaired

before using it. Many accidents are caused by neglected maintenance of a tool. Properly maintained cutting

tools with sharp cutting edges are less prone to jamming in a workpiece and are easier to handle.

Maintain cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less

prone to jamming in a workpiece and are easier to handle.

Use electric power tools, accessories, working tools, etc. according to these instructions in a manner

appropriate for the given type of electric power tool and take into consideration the work conditions and the

type of work that you will be performing.Using electric power tools for purposes other than those for which

they were designed may be dangerous.

Damaged switches must be replaced at an authorised service centre or the vendor. Do not use electric

power tools that cannot be turn on and off.

Do not leave electric power tools turned on without supervision. Always turn the tool off and wait for it to

come to a complete stop before putting it down.

EN

19

FDV 10351-A

CORDLESS DRILLS OPERATING INSTRUCTIONS

Mainetance and storage

Use hearing protection. Excessive noise levels may cause hearing damage.

When performing tasks, where the working tools may come into contact with hidden electrical conductors,

hold the electric power tool by the insulated part that is intended to be held. A work tool that comes into

contact with a "live" electrical conductor, will cause the uninsulated parts of the tool to become live and may

subsequently cause injury by electrical shock to the operator.

For repairs contact an authorised service centre or vendor who will use original spare parts. This will ensure

the correct operation of the electric power tool.

ATTENTION: Using any accessories or tools not recommended in this user's manual may increase the

risk of injury. Always use only original spare parts.

Clean the tool after the completion of every work task.

Do not use worn or damaged drill bits and drilling extension pieces. Such tools may overload the motor and

lower effectiveness.

Take proper care to prevent the motor from damage by oil or water.

Regularly check that the tool has not been damaged during the course of standard operation. Make sure that

all parts are correctly connected and do not use this product if any of its parts has been damaged or lost.

When inserting the battery into the charger, ensure that the battery is inserted in the correct manner and that

there are no materials between the battery contacts, e.g. soils.

The battery and the charger should be protected from heat and the sun. Do not expose these products to

extreme temperatures.

Do not use the device in an outdoor environment.

Use only the charger supplied with this tool.

If the product is damaged or malfunctions, contact an authorised service centre or the vendor.

Storage

Store the tool in a dry location at a suffi cient distance from heat sources or dangerous vapours.

Do not place any other items on the machine.

EN 20

Strona jest ładowana ...

Fieldmann FDV 10351-A Instrukcja obsługi

Fieldmann FDV 10351-A Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty