A: 9300 S.W. Gemini Drive Beaverton, OR 97008 USA W: www.biamp.com
Desono™
Ceiling Loudspeaker Accessories
New Construction Bracket
Installation Guide
New Construction Bracket
Biamp offers New Construction Brackets (NC) suitable for
all Desono CM, C-IC6, and DX ceiling loudspeakers. The
illustrations below are a typical installation in a drywall ceiling.
Please refer to the appropriate Installation and Operation guide
for additional information on drywall ceiling installation methods,
and preinstallation in a new drywall ceiling.
Installation
1. Fasten the bracket to the trusses. Run wire(s) to the
location and secure them to the top of the bracket.
B-style brackets have cleats to easily secure the wiring
with cable ties before ceiling is installed - see box below.
Note: Use of a stretched string or laser to align the brackets,
rather than aligning to the truss is recommended.
2. Install drywall.
3. Cut out the hole.
4. Install ceiling loudspeaker after the ceiling is nished
following installation guide for that model.
2
3
4
1
Typical C-IC6 installation in drywall ceiling
A-Style
B-Style
Secure wiring with
cable ties
B style
Model Fits Style
SPA-NC100 CM20DTS, CM30DTD B
SPA-NC200 CM60DTD B
SPA-NC300 DX-IC4LP, DX-IC4 A
SPA-NC400 DX-IC6, DX-IC6-B, C-IC6 A
SPA-NC500 DX-IC8, CX-IC6LP, C-IC6LP A
SPA-NC600 DX-IC10, DX-IC10SUB A