Bissell 53W17 Instrukcja obsługi

Kategoria
Odkurzacze
Typ
Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

2
Thank You
USER'S GUIDE
16W5 SERIES
Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
Warranty
Troubleshooting
Product Registration
Consumer Care
3
4
5
6-10
11
15
12
16
16
Replacement Parts
Accessories
13
14
Earn BISSELL Rewards!
Register your
product today!
See details on
back page
Downloaded from www.Manualslib.com manuals search engine
www.bissell.com 800.237.7691
Thanks for buying a BISSELL Deep Cleaner
We’re glad you purchased a BISSELL Deep Cleaner. Everything we know
about floor care went into the design and construction of this complete,
high-tech home cleaning system.
Your BISSELL Deep Cleaner is well made, and we back it with a limited one
year warranty. We also stand behind it with a knowledgeable, dedicated
Consumer Care department, so, should you ever have a problem, you’ll
receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL
is a global leader in the design, manufacture, and service of high quality
homecare products like your Deep Cleaner.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
Chairman & CEO
2
Downloaded from www.Manualslib.com manuals search engine
www.bissell.com 800.237.7691
IMPORTANT SAFETY INSTRUCTIONS
3
When using an electrical
appliance, basic pre-
cautions should be observed, including
the following:
READ ALL INSTRUCTIONS BEFORE USING
YOUR DEEP CLEANER
WARNING:
To reduce the risk of fire,
electric shock, or injury:
Do not immerse.
Use only on surfaces moistened by cleaning process.
Always connect to a properly grounded outlet.
See Grounding Instructions.
Unplug from outlet when not in use and before
conducting maintenance or troubleshooting.
Do not leave machine when it is plugged in.
Do not service machine when it is plugged in.
Do not use with damaged cord or plug.
If appliance is not working as it should, has
been dropped, damaged, left outdoors, or
dropped into water, have it repaired at an
authorized Service Center.
Use indoors only.
Do not pull or carry by cord, use cord as a
handle, close door on cord, pull cord around
sharp corners or edges, run appliance over
cord, or expose cord to heated surfaces.
Do not carry the appliance while in use.
Do not unplug by pulling on cord. Unplug by
grasping the plug, not the cord.
Do not handle plug or appliance with wet hands.
Do not put any object into appliance openings,
use with blocked opening, or restrict air flow.
Do not expose hair, loose clothing, fingers or
body parts to openings or moving parts.
Do not pick up hot or burning objects.
Do not pick up flammable or combustible
materials (lighter fluid, gasoline, kerosene, etc.) or
use in the presence of explosive liquids or vapor.
Do not use appliance in an enclosed space filled
with vapors given off by oil base paint, paint thin-
ner, some moth proofing substances, flammable
dust, or other explosive or toxic vapors.
Do not pick up toxic material (chlorine bleach,
ammonia, drain cleaner, gasoline, etc.).
Do not modify the 3-prong grounded plug.
Do not allow to be used as a toy.
Do not use for any purpose other than
described in this user’s guide.
Use only manufacturer’s recommended attachments.
Use only cleaning products formulated by BISSELL for
use in this appliance to prevent internal component
damage. See the Cleaning Fluid section of this guide.
Keep openings free of dust, lint, hair, etc.
Close attention is necessary when used by
or near children.
Keep appliance on a level surface.
Turn off all controls before unplugging.
Be extra careful when cleaning stairs.
Unplug before attaching the TurboBrush
®
.
SAVE THESE
INSTRUCTIONS.
THIS MODEL IS FOR HOUSEHOLD USE ONLY.
Commercial use of this unit voids the
manufacturer’s warranty.
GROUNDING
INSTRUCTIONS
This appliance must be connected to a
grounded wiring system. If it should malfunc-
tion or break down, grounding provides a
safe path of least resistance for electrical cur-
rent, reducing the risk of electrical shock. The
cord for this appliance has an equipment-
grounding conductor and a grounding plug.
It must only be plugged into an outlet that is
properly installed and grounded in accor-
dance with all local codes and ordinances.
WARNING:
Improper connection of the equipment-
grounding conductor can result in a risk
of electrical shock. Check with a qualified
electrician or service person if you aren’t
sure if the outlet is properly grounded.
DO NOT MODIFY THE PLUG. If it will not
fit the outlet, have a proper outlet installed
by a qualified electrician. This appliance
is designed for use on a nominal 120-volt
circuit, and has a grounding attachment
plug that looks like the plug in the drawing
above. Make certain that the appliance
is connected to an outlet having the same
configuration as the plug. No plug adapter
should be used with this appliance.
Grounded
Outlets
Grounding Pin
Downloaded from www.Manualslib.com manuals search engine
www.bissell.com 800.237.7691
4
Upper Body
Removable
Nozzle
Product view
Cleaning fluid
Keep plenty of genuine BISSELL 2X formula on hand so you can clean and protect whenever
it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL
cleaning solutions may harm the machine and will void the warranty.
BISSELL
2X Fiber
Cleansing
Formula with
Scotchgard
Protection
BISSELL
2X Allergen
Cleansing
Formula
BISSELL
2X Pet Stain
and Odor
Removal
Formula with
Scotchgard
Protection
BISSELL
2X Spring
breeze
Formula
BISSELL
Tough
Stain
PreCleaner
BISSELL
2X Hard
Floor
Solutions
Formula
BISSELL
2X Lavender
Essence
Formula
BISSELL
2X
Professional
Deep
Cleaning
Formula with
Scotchgard
Protection
WARNING:
To reduce the risk of fire
and electric shock due to
internal component
damage, use only BISSELL
cleaning fluids intended
for use with the deep
cleaner.
Tough Stain
Tool
Quick Release
Cord Wrap
Spray Trigger
Handle
Assembly
Power Cord
Vent Cover
( Foam Filter)
Hose
Wrap
Hose
Collection
Tank Latch
Collection
Tank Latch
Downloaded from www.Manualslib.com manuals search engine
www.bissell.com 800.237.7691
Assembly
5
Your Ready Clean Powerbrush Plus
assembles quickly and easily. The only
tool you will need for assembly is a
Phillips head screwdriver.
1. Locate the screw pack, which is taped
to the upper handle.
2. Slide the upper body onto the lower
body, taking care not to leave a gap
between the upper and lower body.
3. Firmly holding the upper body, screw
the 2 screws into the holes marked
with arrows.
TIP: If you are having difficulty
tightening the screws, remove,
re-insert, and tighten again.
4. Slide the hose wrap onto the upper
handle as pictured and push up until
it snaps into place.
5. Slide the upper handle into the upper
body until it will not go any farther and
secure it with a screw at the marked
screw hole above the water tank.
6. After tightening the screws, ensure
proper fit between the upper and lower
body by trying to separate the two. If
assembled properly, there should be no
gap. If a gap appears between the two
(see picture at right), continue to tighten
the screws until no gap is present.
7. Place solution tank on back of unit.
8. Wrap power cord and flex hose.
9. Keep flex hose snugly in place by using
the hose secure latch.
10. Attach tool to end of hose.
Assembly is now complete.
2.
4.
6.
7.
9.
3.
5.
8.
10.
CORRECT
INCORRECT
Downloaded from www.Manualslib.com manuals search engine
www.bissell.com 800.237.7691
Operations
6
Before you clean
1. Move furniture to another area if
cleaning an entire room. (Optional)
2. Vacuum carpet thoroughly.
3. Plan your cleaning route to leave an
exit path. It is best to begin cleaning in
the corner farthest from your exit.
4. Pre-Treating (optional) Pre-treat stubborn
stains and highly soiled carpet in hallways
and other high-traffic areas.
4a. Generously spray BISSELL Tough Stain
Precleaner evenly over soiled area.
Caution: DO NOT OVER WET
CARPET
4b. Wait 3-5 minutes before deep cleaning.
Fill the tank
1. Remove the solution tank by lifting it straight
up, then away from the lower body.
2. Unscrew the black cap at the bottom of
the solution tank.
3. Fill with hot (not boiling) tap water to the
WATER line. Fill the rest of the tank with
BISSELL 2X Formula to the FORMULA
line. Replace and tighten the black cap.
4. Place solution tank on lower body.
Tip: To ensure proper function, make sure
the tank is completely seated. Failure to
do so can result in reduced or no spray.
Carpet cleaning
1. Set ReadyTools dial to "FLOOR CLEANING".
2. Plug into proper outlet.
3. Turn the power switch to the ON (I)
position (located on the back of unit)
4. With foot, press the recline lever
(located on the back of unit).
5. Cleaning Strokes. While pressing the
trigger, make one slow forward wet
pass and another one back.
Caution: DO NOT OVERWET.
3. & 4.
2.
1.
1.
4.3.
Recline
Lever
Power
WARNING:
To reduce the risk of fire, use
only BISSELL advanced deep
cleaning formula for full size
machines in your deep cleaner.
Use of cleaning formulas that
contain lemon or pine oil may
damage this appliance and void
the warranty. Chemical spot
cleaners or solvent-based soil
removers should not be used.
These products may react with
the plastic materials used in your
deep cleaner causing cracking
or pitting.
Downloaded from www.Manualslib.com manuals search engine
www.bissell.com 800.237.7691
7
Operations
Carpet cleaning continued
6. Release the trigger and make one
slow forward and backward pass
over the same area.
7. Repeat steps 5 and 6 until solution
being pulled up appears clean.
8. Empty the collection tank when dirty
water reaches the full line, or when
the solution tank is empty.
Empty the collection tank
1. Turn power switch OFF (O) and unplug
power cord from outlet.
2. Remove the collection tank from base
of unit.
2a. Release collection tank latches
(on each side) by pulling up from the
bottom of latch and then out.
2b. Carefully remove the top of the tank
by lifting up on the tank handle.
3. Carry collection tank to a toilet or sink.
To empty, pour out contents using opening
at back of tank.
4. Rinse collection tank thoroughly and replace
on unit.
5. Refill solution tank and continue cleaning.
2a.
3.
2b.
Downloaded from www.Manualslib.com manuals search engine
www.bissell.com 800.237.7691
Operations
8
Cleaning with Attachments
Your Deep Cleaner is equipped with a
hose and at least one attachment for
cleaning stairs, upholstery, and more.
1. Important! If using to clean upholstery,
check upholstery tags.
1a. Check manufacturer’s tag before clean-
ing. “W” or “WS” on the tag means you
can use your Deep Cleaner. If the tag is
coded with an “X” or an “S” (with a diag-
onal stripe through it), or says “Dry Clean
Only”, do not proceed with any deep
cleaning machine. Do not use on velvet or
silk. If manufacturer’s tag is missing or not
coded, check with your furniture dealer.
1b. Check for colorfastness in an incon-
spicuous place.
1c. If possible, check upholstery stuffing.
Colored stuffing may bleed through
fabric when wet.
1d. Plan activities to allow upholstery
time to dry.
1e. Vacuum area thoroughly.
2. Follow the instructions on page 6 for
filling the tank.
3. Set the ReadyTools dial to the “TOOLS” setting.
4. Attach the cleaning tool to the end of the hose.
5. Plug in and turn the power switch to the
ON (I) position.
6. Clean by pressing the trigger to spray
solution onto the area to be cleaned.
Slowly move the tool back and forth over
the soiled surface. Release the trigger to
suction dirty water. Continue to clean in
the area, working in small sections, until
dirt is removed.
Caution: Do Not Overwet.
7. When finished cleaning, remove and rinse
tool(s) in clean, running water.
8. It is recommended that you suction clean
water from a bowl to rinse out the hose.
9. Lift end of hose and stretch out to ensure all
water is cleared from hose.
4.
9.
3.
Downloaded from www.Manualslib.com manuals search engine
www.bissell.com 800.237.7691
9
Operations
10. Wrap flex hose around hose wrap.
11. Empty collection tank and rinse out,
following instructions on page 10 under
"Cleaning after use."
12. Return ReadyTools dial to “FLOOR
CLEANING” setting.
Deep reach tool attachment
(Select models only)
1. Follow the instructions on page 6 for
Filling the tank.
2. Follow instructions 1-5 on page 8 under
"Cleaning with attachments".
3. Set tool on stain and press the trigger
to spray solution onto the area to be
cleaned.
4. Slowly move the tool back and forth over
the soiled surface, keeping the tool in con-
tact with the carpet.
5. Release trigger and move tool slowly over
the soiled area to suction up water and
dirt.
6. Continue to clean the area, working
in small sections, until no more dirt can
be removed.
7. Remove tool from hose when finished.
Clean under warm water before storing
8. Follow cleaning attachment instructions
on pages 8 and 9, instructions 8-12.
Cleaning with Attachments continued
3.
5.
7.
Downloaded from www.Manualslib.com manuals search engine
www.bissell.com 800.237.7691
Operations
10
Hard floor cleaning
(Select models only)
1. Remove the collection tank (refer to steps
2a and 2b on page 7).
2. Attach the hard floor tool by hooking it
into the front of the removable nozzle and
rotate until it snaps firmly in place.
3. Replace the collection tank. Be sure to
attach the two latches.
4. Fill the solution tank with hot (not boiling)
tap water to the WATER fill line. Fill the rest
with BISSELL 2X Hard Floor Solutions™ to
FORMULA fill line.
5. Follow steps 1-8 under "Carpet Cleaning"
on page 6 and 7 to continue cleaning.
Cleaning after use
1. Unplug the unit.
2. Rinse collection tank thoroughly.
2a. Remove ReadyTools Dial by
rotating it halfway between “TOOlS” &
“FLOOR CLEANING.”
2b. Pop out knob by using the opening on
the back of the tank. Rinse and replace knob
and collection tank.
3. Remove tank vent & foam filter (located on
top of the collection tank) and rinse.
4. Clean nozzle window by lifting latch and
removing from machine. Rinse under run-
ning water.
5. When finished replace nozzle and secure
with latch.
NOTE: For best results, it is
recommended that the nozzle is
cleaned after each use.
6. Remove lint and hair from red gasket in
base of unit. (Do not remove gasket)
7. Replace the collection tank to the base
of the machine and secure with latches.
2. 4.
WARNING:
To reduce the risk of fire and
electric shock- when clean-
ing a hard floor, the BISSELL
hard floor tool (203-5683)
must be used and it must
only be used with BISSELL
2X Hard Floor Solutions
cleaning fluid intended for
use with this appliance.
5. 6.
2b.
3.
2a.
2b.
4.
Downloaded from www.Manualslib.com manuals search engine
www.bissell.com 800.237.7691
11
Maintenance and care
Machine storage
For best results, a few simple
steps can assure your machine is
well maintained after your cleaning
is complete.
1. Wrap power cord around Quick Release
Cord Wrap™ on side of the machine.
2. Wipe all surfaces with a soft cloth. Store
cleaner upright in a protected, dry area.
NOTE: You may have cleaning
solution remaining in the solution
tank. You may store your machine
this way for the next cleaning
task, but never keep dirty water
in the collection tank.
1. Turn the machine off and unplug from
wall outlet.
2. Remove solution and collection tanks.
3. Lie machine down to access the bottom
of the machine.
4. With a Phillips head screwdriver,
unscrew the belt cover and remove.
5. Remove the brush end cap and remove belt
from brush.
6. Brush can now be removed.
7. Belt can be removed by sliding off the
motor pulley.
8. Clean or replace belt. Attach belt to
motor pulley and brush, insert brush into
right side end cap.
9. Reattach the left end cap and slide
brush back into place.
10. Replace the belt cover and screw
into place.
11. Manually rotate brush to make sure
it rotates freely and that the belt is
aligned properly.
Install the replacement brush belt
4.
5.
10.
CAUTION:
Do not store unit where
freezing may occur.
Damage to internal
components may result.
WARNING:
To reduce the risk of injury
from moving parts and/or
electrical shock, turn power
switch OFF and disconnect
plug from electrical
outlet before performing
maintenance or
troubleshooting checks.
Downloaded from www.Manualslib.com manuals search engine
www.bissell.com 800.237.7691
Troubleshooting
www.bissell.com 800.237.7691
12
Reduced Spray OR No Spray in Upright Mode
Possible causes Remedies
1. Solution tank empty 1. Refill tank with water and formula
2. Lint screen on solution tank cap clogged 2. Soak solution tank cap in warm water and then rinse under
running water
3. Upper body not properly attached properly. 3. Repeat steps 2-4 on page 5.
Reduce Spray or No Spray Attachment
Possible causes Remedies
1. Solution tank empty 1. Refill tank with water and formula
2. Spray Nozzle Clogged 2. Clean Spray nozzle by rinsing tool under water
3. Pump needs priming 3. Place tool on floor and press trigger
4. Machine is reclined 4. Return machine to full upright position until it locks
into place
5. ReadyTools dial is set to “FLOOR CLEANING” 5. Choose “TOOLS” setting on ReadyTools dial
Deep cleaner not picking up cleaning solution
Possible causes Remedies
1. Collection tank not aligned/secured 1. Check tank alignment and secure with side latches
2. Collection tank full 2. Empty tank
3. Removable nozzle installed improperly 3. Unplug unit. Align four "hooks" into bottom first, then snap
into place on top
4. Removable nozzle full of debris 4. Unplug unit. Remove nozzle and rinse under running water
5. Red lint screen under collection tank clogged 5. Remove debris from lint screen
6. ReadyTools dial not set properly 6. Choose either “FLOOR CLEANING” or “TOOLS” for desired
cleaning method
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of
service. Contact us directly at 1-800-237-7691.
Downloaded from www.Manualslib.com manuals search engine
www.bissell.com 800.237.7691
13
Replacement parts - BISSELL ReadyClean
Below please find a list of common replacement parts. While not all of these
parts may have come with your specific machine, all are available to you
for purchase, if desired.
Item Part No. Part Name
1 203-5657 Handle Assembly (includes screws) (red)
2 203-5661 Solution Tank (Includes Cap and Insert Assembly)
3 203-5673 Collection Tank (with diverter)
4 203-5546 DirtLifter PowerBrush
5 203-5660 Cord Wrap (upper)
6 203-5658 Hose Wrap Clip
7 203-5663 Upper body with Screws
8 203-5659 Lower Hose Wrap
9 203-5679 Nozzle
10 203-5549 Belt
11 203-5662 Solution tank cap & insert
*Not all parts are included with every model.
1
6
10
2
7
11
3
8
4 5
9
Downloaded from www.Manualslib.com manuals search engine
www.bissell.com 800.237.7691
Accessories - BISSELL ReadyClean
14
Below, please find a list of accessories. While not all of these parts may have
come with your specific machine, all are available to you for purchase if desired.
Item Part No. Part Name
1 203-6651 3” Tough Stain Tool
2 203-6652 Powered TurboBrush® Hand Tool
3 203-6653 4” Upholstery Tool
4 203-6654 6” Stair Tool
5 203-6655 Spraying Crevice Tool
6 203-7412 Deep Reach Pet Tool
7 203-5683 Hard Floor Tool
8 62E5-2 2X Fiber Cleansing Formula with Scotchgard™
Protection 60 oz.
9 99K5-2 2X Pet Stain and Odor Removal Formula with
Scotchgard™ Protection 60 oz.
10 89Q5-2 2X Allergen Cleansing Formula 60 oz.
11 83P3-2 2X Natural Orange Formula 60 oz.
12 34B5-2 2X Lavender Essence Formula 60 oz.
13 78H6-3 2X Professional Deep Cleaning Formula with
Scotchgard™ Protection 48 oz.
14 26V2 2X Spring Breeze Formula 60 oz.
15 56L9 2X Hard Floor Solutions™ Formula 16 oz.
16 4001 Tough Stain PreCleaner™ 22 oz
*Not all parts are included with every model.
1
6
11
16
2
7
12
3
8
13
4
9
14
5
10
15
Downloaded from www.Manualslib.com manuals search engine
www.bissell.com 800.237.7691
15
Warranty - BISSELL ReadyClean
This warranty gives you specific legal rights, and you may also have other rights which may
vary from state to state. If you need additional instruction regarding this warranty or have
questions regarding what it may cover, please contact BISSELL Consumer Care by E-mail,
telephone, or regular mail as described below.
Limited One Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon receipt of the
product BISSELL will repair or replace (with new or remanufactured components or products),
at BISSELLs option, free of charge from the date of purchase by the original purchaser, for
one year any defective or malfunctioning part.
See information below on "If your BISSELL product should require service".
This warranty applies to product used for personal, and not commercial or rental service. This
warranty does not apply to fans or routine maintenance components such as filters, belts, or
brushes. Damage or malfunction caused by negligence, abuse, neglect, unauthorized repair, or
any other use not in accordance with the user's guide is not covered.
If your BISSELL product should require service:
Contact BISSELL Consumer Care to locate a BISSELL Authorized Service Center in your area.
If you need information about repairs or replacement parts, or if you have questions about
your warranty, contact BISSELL Consumer Care.
Website or E-mail:
www.bissell.com
Or Call:
BISSELL Consumer Care
1-800-237-7691
Monday - Friday 8 am - 10 pm ET
Saturday 9 am - 8 pm ET
Or Write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids, MI 49501
ATTN: Consumer Care
BISSELL IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE
ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE
PURCHASE PRICE OF THE PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitation or exclusion may not apply to you.
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR
WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO THE ONE YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.
Some states do not allow limitations on how long an implied warranty last so the above limitation
may not apply to you.
Downloaded from www.Manualslib.com manuals search engine
©2012 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 120-4490
Rev 3/12
Visit our website at:
www.bissell.com
Scotchgard is a trademark of 3M
For information about repairs or replacement parts, or questions about your warranty, call:
BISSELL Consumer Care
1-800-237-7691
Monday - Friday 8 am — 10 pm ET
Saturday 9 am — 8 pm ET
Or write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids MI 49501
ATTN: Consumer Care
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It
provides proof of purchase date in the event of a
warranty claim. See Warranty on page 15 for details.
BISSELL consumer care
www.bissell.com 800.237.7691
16
Registering is quick, easy and offers you benefits over the lifetime of your product.
You’ll receive:
BISSELL Rewards Points
Automatically earn points for discounts and free shipping on future purchases.
Faster Service
Supplying your information now saves you time should you need to contact us with
questions regarding your product.
Product Support Reminders and Alerts
We’ll contact you with any important product maintenance reminders and alerts.
Special Promotions
Optional: Register your email to receive notice of offers, contests, cleaning tips and more!
Visit www.bissell.com/registration now!
Don't forget to register your product!
Downloaded from www.Manualslib.com manuals search engine
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Bissell 53W17 Instrukcja obsługi

Kategoria
Odkurzacze
Typ
Instrukcja obsługi
Ten podręcznik jest również odpowiedni dla

w innych językach