Sony KLV-26U25 Instrukcja obsługi

KLV-40U25xx

KLV-32U25xx

KLV-26U25xx

LCD Colour TV

3-216-582-31(0)

K

GB

KLV-40/32/26U25xx

3-216-582-31(0)

RU

PL

Operating Instructions

Before operating the TV, please read the “Safety

information” section of this manual.

Retain this manual for future reference.

Инструкция по эксплуатации

Перед включением телевизора прочтите раздел “Сведения

по безопасности” этого руководства.

Сохраняйте данное руководство для справок в будущем.

Instrukcja obsługi

Przed rozpoczęciem eksploatacji telewizora należy zapoznać

się z treścią rozdziału „Informacje dotyczące bezpieczeństwa”

niniejszej instrukcji.

Zachować instrukcję do wykorzystania w przyszłości.

For useful information about Sony products

Для получения полезной информации о продукции Сони

Szczegółowe informacje o produktach Sony

010COV.fm Page 1 Wednesday, April 18, 2007 3:43 PM

KLV-40/32/26U25xx

3-216-582-31(0)

2

GB

Thank you for choosing this Sony product.

Before operating the TV, please read this manual

thoroughly and retain it for future reference.

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the product or on

its packaging indicates that this

product shall not be treated as

household waste. Instead it shall

be handed over to the applicable

collection point for the recycling

of electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent

potential negative consequences for the environment and

human health, which could otherwise be caused by

inappropriate waste handling of this product. The recycling

of materials will help to conserve natural resources. For more

detailed information about recycling of this product, please

contact your local Civic Office, your household waste

disposal service or the shop where you purchased the

product.

Trademark information

• Manufactured under license from BBE Sound, Inc.

Licensed by BBE Sound, Inc. under one or more of the

following US patents: 5510752, 5736897. BBE and BBE

symbol are registered trademarks of BBE Sound, Inc.

• Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

• HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of

HDMI Licensing, LLC.

• The illustrations used in this manual are of the

KLV-32U2520 unless otherwise state.

• The "xx" that appears on the model name, corresponds to

two numeric digits related to colour variation.

Introduction

Disposal of the TV set

010COV.book Page 2 Wednesday, April 18, 2007 3:53 PM

3

GB

KLV-40/32/26U25xx

3-216-582-31(0)

Table of Contents

Start-up Guide 4

Safety information .....................................................................................................................7

Precautions ...............................................................................................................................8

Overview of the remote ..........................................................................................................9

Overview of the TV buttons and indicators ........................................................................10

Watching TV............................................................................................................................10

Navigating through menus ......................................................................................................12

Picture Adjustment menu ........................................................................................................13

Sound Adjustment menu.........................................................................................................14

Features menu ........................................................................................................................15

Set-up menu............................................................................................................................16

Connecting optional equipment...............................................................................................18

Viewing pictures from connected equipment ..........................................................................20

Specifications ..........................................................................................................................21

Troubleshooting ......................................................................................................................22

Start-up Guide 4

Watching TV

Using MENU Functions

Using Optional Equipment

Additional Information

GB

010COV.book Page 3 Wednesday, April 18, 2007 3:53 PM

4

GB

KLV-40/32/26U25xx

3-216-582-31(0)

Start-up Guide

1: Checking the

accessories

Remote RM-EA006 (1)

Size AA batteries (R6 type) (2)

Cable holder (1) (only for KLV-40U25xx)

Support belt (1) and screws (2)

To insert batteries into the remote

Notes

• Observe the correct polarity when inserting batteries.

• Do not use different types of batteries together or mix old

and new batteries.

• Dispose of batteries in an environmentally friendly way.

Certain regions may regulate the disposal of batteries.

Please consult your local authority.

• Handle the remote with care. Do not drop or step on it, or

spill liquid of any kind onto it.

• Do not place the remote in a location near a heat source, a

place subject to direct sunlight, or a damp room.

2: Connecting an aerial/

VCR

Connecting an aerial and VCR

Coaxial cable

(not supplied)

Scart lead (not supplied)

VCR

RF lead

(not supplied)

Connecting an aerial only

010COV.book Page 4 Wednesday, April 18, 2007 3:53 PM

5

GB

KLV-40/32/26U25xx

3-216-582-31(0)

Start-up Guide

3: Bundling the cables 4: Preventing the TV

from toppling over

5:

Selecting the language

and country/region

1 Connect the TV to your mains socket

(220-240V AC, 50Hz).

2 Press 1 on the TV (top side).

When you switch on the TV for the first time, the

Language menu appears on the screen.

When the TV is in standby mode (the

1 (standby)

indicator on the TV (front) is red), press "/1 on

the remote to switch on the TV.

(only for KLV-40U25xx)

2

3

1

2

1

3,4

2

Continued

010COV.book Page 5 Wednesday, April 18, 2007 3:53 PM

6

GB

KLV-40/32/26U25xx

3-216-582-31(0)

3 Press F/f to select the language

displayed on the menu screens, then press

.

4 Press F/f to select the country/region in

which you will operate the TV, then press

.

If the country/region in which you want to use the

TV does not appear in the list, select “-” instead of

a country/region.

The message confirming the TV start auto-tuning

appears on the screen, then go to “6: Auto-tuning

the TV”.

6: Auto-tuning the TV

After selecting the language and country/region, a

message confirming the TV start auto-tuning appears

on the screen.

The TV will now search for and store all available TV

channels.

1 Press .

This may take some time, please be patient and do

not press any buttons on the TV or remote.

If a message appears for you to confirm the aerial

connections

No channels were found. Check all the aerial

connections and press to start auto-tuning

again.

2 When the Programme Sorting menu

appears on the screen, follow the steps of

“Programme Sorting” (page 16).

If you do not wish to change the order in which the

channels are stored on the TV, go to step 3.

3 Press MENU to exit.

The TV has now tuned in all the available

channels.

Auto Start Up

Language

Country

Select:

Confirm:

Auto Start Up

Language

Country

Select:

Confirm:

1

3

Back:

Start:

Cancel:

MENU

010COV.book Page 6 Wednesday, April 18, 2007 3:53 PM

7

GB

Safety information

Installation/Set-up

Install and use the TV set in accordance with the

instructions below in order to avoid any risk of fire,

electrical shock or damage and/or injuries.

Installation

• The TV set should be installed near an easily accessible

mains socket.

• Place the TV set on a stable, level surface.

• Only qualified service personnel should carry out wall

installations.

• For safety reasons, it is strongly recommended that you

use Sony accessories, including:

– KLV-40U25xx:

Wall-mount bracket SU-WL51

– KLV-32U25xx/KLV-26U25xx:

Wall-mount bracket SU-WL31

Transporting

• Before transporting the TV set,

disconnect all cables.

• Two or three people are needed to

transport a large TV set.

• When transporting the TV set by

hand, hold it as shown on the right.

• When lifting or moving the TV set,

hold it firmly from the bottom. Do

not put stress on the LCD panel and

the frame around the screen.

• When transporting the TV set, do

not subject it to jolts or excessive

vibration.

• When transporting the TV set for repairs or when moving,

pack it using the original carton and packing material.

Ventilation

• Never cover the ventilation holes or insert anything in the

cabinet.

• Leave space around the TV set as shown below.

• It is strongly recommended that you use a Sony wall-

mount bracket in order to provide adequate air-circulation.

Installed on the wall

Installed with stand

• To ensure proper ventilation and prevent the collection of

dirt or dust:

– Do not lay the TV set flat, install upside down,

backwards, or sideways.

– Do not place the TV set on a shelf, rug, bed or in a

closet.

– Do not cover the TV set with a cloth, such as curtains,

or items such as newspapers, etc.

– Do not install the TV set as shown below.

Mains lead

Handle the mains lead and socket as follows in order

to avoid any risk of fire, electrical shock or damage

and/or injuries:

– Use only Sony mains leads, not those of other brands.

– Insert the plug fully into the mains socket.

– Operate the TV set on a 220-240 V AC supply only.

– When wiring cables, be sure to unplug the mains lead

for your safety and care not to catch your feet on the

cables.

– Disconnect the mains lead from the mains socket before

working on or moving the TV set.

– Keep the mains lead away from heat sources.

– Unplug the mains plug and clean it regularly. If the plug

is covered with dust and it picks up moisture, its

insulation may deteriorate, which could result in a fire.

30 cm

10 cm

Leave at least this space around the set.

30 cm

10 cm10 cm

6 cm

Leave at least this space around the set.

Air circulation

is blocked.

Air circulation

is blocked.

Wall

Continued

010COV.book Page 7 Wednesday, April 18, 2007 3:53 PM

8

GB

Notes

• Do not use the supplied mains lead on any other

equipment.

• Do not pinch, bend, or twist the mains lead excessively.

The core conductors may be exposed or broken.

• Do not modify the mains lead.

• Do not put anything heavy on the mains lead.

• Do not pull on the mains lead itself when disconnecting

the mains lead.

• Do not connect too many appliances to the same mains

socket.

• Do not use a poor fitting mains socket.

Prohibited Usage

Do not install/use the TV set in locations,

environments or situations such as those listed below,

or the TV set may malfunction and cause a fire,

electrical shock, damage and/or injuries.

Location:

Outdoors (in direct sunlight), at the seashore, on a ship or

other vessel, inside a vehicle, in medical institutions, near

flammable objects (candles, etc).

Environment:

Places that are hot, humid, or excessively dusty; where

insects may enter; where it might be exposed to mechanical

vibration; unstable locations; near water, rain, moisture or

smoke.

Situation:

Do not use when your hands are wet, with the cabinet

removed, or with attachments not recommended by the

manufacturer. Disconnect the TV set from mains socket and

aerial during lightning storms.

Broken pieces:

• Do not throw anything at the TV set. The screen glass may

break by the impact and cause serious injury.

• If the surface of the TV set cracks, do not touch it until you

have unplugged the mains lead. Otherwise electric shock

may result.

When not in use

• If you will not be using the TV set for several days, the TV

set should be disconnected from the mains for

environmental and safety reasons.

• As the TV set is not disconnected from the mains when the

TV set is just turned off, pull the plug from the mains to

disconnect the TV set completely.

For children

• Do not allow children to climb on the TV set.

• Keep small accessories out of the reach of children, so that

they are not mistakenly swallowed.

If the following problems occur...

Turn off the TV set and unplug the mains lead

immediately if any of the following problems occur.

Ask your dealer or Sony service centre to have it

checked by qualified service personnel.

When:

– Mains lead is damaged.

– Poor fitting of mains socket.

– TV set is damaged by being dropped, hit or having

something thrown at it.

– Any liquid or solid object falls through openings in the

cabinet.

Precautions

Viewing the TV

• View the TV in moderate light, as viewing the TV in poor

light or during long period of time, strains your eyes.

• When using headphones, adjust the volume so as to avoid

excessive levels, as hearing damage may result.

LCD Screen

• Although the LCD screen is made with high-precision

technology and 99.99% or more of the pixels are effective,

black dots may appear or bright points of light (red, blue,

or green) may appear constantly on the LCD screen. This

is a structural property of the LCD screen and is not a

malfunction.

• Do not push or scratch the front filter, or place objects on

top of this TV set. The image may be uneven or the LCD

screen may be damaged.

• If this TV set is used in a cold place, a smear may occur in

the picture or the picture may become dark. This does not

indicate a failure. These phenomena disappear as the

temperature rises.

• Ghosting may occur when still pictures are displayed

continuously. It may disappear after a few moments.

• The screen and cabinet get warm when this TV set is in

use. This is not a malfunction.

• The LCD screen contains a small amount of liquid crystal

and mercury. The fluorescent tubes used in this TV set

also contains mercury. Follow your local ordinances and

regulations for disposal.

Handling and cleaning the screen surface/cabinet of

the TV set

Be sure to unplug the mains lead connected to the TV set

from mains socket before cleaning.

To avoid material degradation or screen coating degradation,

observe the following precautions.

• To remove dust from the screen surface/cabinet, wipe

gently with a soft cloth. If dust is persistent, wipe with a

soft cloth slightly moistened with a diluted mild detergent

solution.

• Never use any type of abrasive pad, alkaline/acid cleaner,

scouring powder, or volatile solvent, such as alcohol,

benzene, thinner or insecticide. Using such materials or

maintaining prolonged contact with rubber or vinyl

materials may result in damage to the screen surface and

cabinet material.

• When adjusting the angle of the TV set, move it slowly so

as to prevent the TV set from moving or slipping off from

its table stand

Optional Equipment

Keep optional components or any equipment emitting

electromagnetic radiation away from the TV set. Otherwise

picture distortion and/or noisy sound may occur.

010COV.book Page 8 Wednesday, April 18, 2007 3:53 PM

9

GB

KLV-40/32/26U25xx

3-216-582-31(0)

Overview of the remote

Tip

The PROG + and number 5 buttons have tactile dots. Use the tactile dots as references when operating the TV.

1 "/1 – TV standby

Switches the TV on and off from standby mode.

Note

To disconnect the TV completely, pull the plug from the mains.

2 – Screen mode (page 11)

3 Coloured buttons

In Text mode (page 11): Used for Fastext.

4 / – Info / Text reveal

• In TV mode: Displays information such as current channel number and screen

mode.

• In Text mode (page 11): Reveals hidden information (e.g., answers to a quiz).

5 F/f/G/g/ (page12)

6 Picture Freeze (page 11)

In TV mode: Freezes the TV picture.

7 MENU (page 12)

8 Number buttons

• In TV mode: Selects channels. To select channel numbers 10 and above using

the number buttons, enter the second and third digits within two seconds.

• In Text mode: Enters the three digit page number to select the page.

9 – Previous channel

Returns to the previous channel watched (for more than five seconds).

0 PROG +/- (page 10)

• In TV mode: Selects the next (+) or previous (-) channel.

• In Text mode: Selects the next (+) or previous (-) page.

qa 2 +/- – Volume

qs % – Mute

qd

/ – Text (page 11)

qf

PIP in PC Mode (page 11)

Displays a small picture (PIP).

qg – Return to normal TV mode

qh – Picture mode (page 13)

qj 9 – Sound effect (page 14)

qk – Input select / Text hold

• In TV mode (page 18): Selects the input source from equipment connected to

the TV sockets.

• In Text mode (page 11): Holds the current page.

010COV.book Page 9 Wednesday, April 18, 2007 3:53 PM

10

GB

KLV-40/32/26U25xx

3-216-582-31(0)

Overview of the TV

buttons and indicators

1 MENU (page 12)

2 / – Input select/OK

• In TV mode (page 18): Selects the input source

from equipment connected to the TV sockets.

• In TV menu: Selects the menu or option, and

confirm the setting.

3 2 +/-/G/g

• Increases (+) or decreases (-) the volume.

• In TV menu: Moves through the options left (

G)

or right (

g).

4 PROG +/-/F/f

• In TV mode: Selects the next (+) or previous (-)

channel.

• In TV menu: Moves through the options up (

F) or

down (

f).

5 1 – Power

Switches the TV on or off.

Note

To disconnect the TV completely, pull the plug from

the mains.

6 – Picture Off/Sleep Timer indicator

• Lights up in green when “Picture Off” is set

(page 15).

• Lights up in amber when the “Sleep Timer” is set

(page 16).

7 1 – Standby indicator

Lights up in red when the TV is in standby mode.

8 " – Power indicator

Lights up in green when the TV is switched on.

9 Remote control sensor

Watching TV

1 Press 1 on the TV (top side) to switch on

the TV.

When the TV is in standby mode (the 1 (standby)

indicator on the TV (front) is red), press "/1 on

the remote to switch on the TV.

2 Press the number buttons or PROG +/- to

select a TV channel.

Watching TV

1

2

010COV.book Page 10 Wednesday, April 18, 2007 3:53 PM

11

GB

KLV-40/32/26U25xx

3-216-582-31(0)

Additional operations

To access Text

Press /. Each time you press /, the display changes

cyclically as follows:

Text t Text over the TV picture (mix mode) t No

Text (exit the Text service)

To select a page, press the number buttons or PROG

+/-.

To hold a page, press / .

To reveal hidden information, press / .

Picture Freeze

Freezes the TV picture (e.g. to make a note of a

telephone number or recipe).

1 Press on the remote control.

2 Press F/f/G/g to adjust the position of the

window.

3 Press to remove the window.

4 Press again to return to normal TV

mode.

Tip

Not available for AV3, AV5, AV6 and

AV7.

PIP in PC Mode (Picture in Picture)

In PC mode, displays a small picture of the last

channel selected.

1 Press on the remote control.

2 Press F/f/G/g to adjust the position of the

window.

3 Press to cancel.

Tip

The sound is output from the small picture.

To change the screen mode manually to

suit the broadcast

Press repeatedly to select Smart, 4:3, Wide,

Zoom, or 14:9.

Displays conventional 4:3 broadcasts with an

imitation wide screen effect. The 4:3 picture is

stretched to fill the screen.

Displays conventional 4:3 broadcasts (e.g., non-wide

screen TV) in the correct proportions.

Displays wide screen (16:9) broadcasts in the correct

proportions.

Displays cinemascopic (letter box format) broadcasts

in the correct proportions.

Displays 14:9 broadcasts in the correct proportions. As a

result, black border areas are visible on the screen.

* Parts of the top and bottom of the picture may be cut off.

Tips

• Alternatively, you can set “Auto Format” to “On”. The TV

will automatically select the best mode to suit the

broadcast (page 15).

• You can adjust the position of the picture when selecting

Smart, 14:9, or Zoom. Press

F/f to move up or down

(e.g., to read subtitles).

To Do this

Access the

Programme index

table

Press . To select a channel,

press

F/f, then press .

Smart*

4:3

Wide

Zoom*

14:9*

Watching TV

010COV.book Page 11 Wednesday, April 18, 2007 3:53 PM

12

GB

KLV-40/32/26U25xx

3-216-582-31(0)

Navigating through menus

“MENU” allows you to enjoy various convenient features of this TV. You can easily select channels or external

inputs with the remote. Also, settings for your TV can be changed easily using “MENU”.

1 Press MENU to display the menu.

2 Press F/f to select an option.

3 Press to confirm a selected option.

To exit the menu, press MENU.

Using MENU Functions

1

2,3

Programme List

Select:

Enter:

Exit:

MENU

Menu Description

Programme List

Allows you to select TV programs from a list of channel labels.

• To watch the desired channel, select the channel, then press .

• To assign a label to a program, see page 17.

External Inputs

Selects equipment connected to your TV.

• To watch the desired external input, select the input source, then

press .

• To assign a label to an external input, see page 16.

Settings

Opens the Settings menu screen where most of advanced settings and

adjustments are performed. Select a menu icon, select an option and make the

desired change or adjustment using

F/f/G/g.

For details about settings, see page 13 to 17.

010COV.book Page 12 Wednesday, April 18, 2007 3:53 PM

13

GB

KLV-40/32/26U25xx

3-216-582-31(0)

Using MENU Functions

Picture Adjustment menu

You can select the options listed below on the

Picture menu. To select options in “Settings”,

see “Navigating through menus” (page 12).

Picture Mode

Selects the picture mode.

• “Vivid”: For enhanced picture contrast and sharpness.

• “Standard”: For standard picture. Recommended for home entertainment.

• “Custom”: Allows you to store your preferred settings.

Backlight

Adjusts the brightness of the backlight.

Contrast

Increases or decreases picture contrast.

Brightness

Brightens or darkens the picture.

Colour

Increases or decreases colour intensity.

Hue

Increases or decreases the green tones.

Tip

“Hue” can only be adjusted for an NTSC colour signal (e.g., U.S.A. video tapes).

Sharpness

Sharpens or softens the picture.

Colour Tone

Adjusts the whiteness of the picture.

• “Cool”: Gives the white colours a blue tint.

• “Neutral”: Gives the white colours a neutral tint.

• “Warm”: Gives the white colours a red tint.

Tip

“Warm” can only be selected when you set “Picture Mode” to “Custom”.

Reset

Resets all picture settings except “Picture Mode” to the factory settings.

Noise Reduction

Reduces the picture noise (snowy picture) in a weak broadcast signal.

• “Auto”: Automatically reduces the picture noise.

• “High/Mid/Low”: Modifies the effect of the noise reduction.

Picture Adjustment

Select:

Enter:

Exit:

MENU

Picture Mode

Backlight

Contrast

Brightness

Colour

Hue

Sharpness

Colour Tone

Reset

Noise Reduction

Custom

5

Max

50

0

15

Warm

Auto

Back:

010COV.book Page 13 Wednesday, April 18, 2007 3:53 PM

14

GB

KLV-40/32/26U25xx

3-216-582-31(0)

Sound Adjustment menu

You can select the options listed below on the

Sound menu. To select options in “Settings”,

see “Navigating through menus” (page 12).

Sound Effect Selects the sound mode.

• “Standard”: Enhances clarity, detail, and sound presence by using “BBE High definition

Sound System.”

• “Dynamic”: Intensifies clarity and sound presence for better intelligibility and musical

realism by using the “BBE High definition Sound System.”

• “BBE ViVA”: BBE ViVA Sound provides musically accurate natural 3D image with Hi-Fi

sound. The clarity of the sound is improved by BBE while the width depth and height of

sound image are expanded by BBE’s proprietary 3D sound process. BBE ViVA Sound is

compatible with all TV programs including news, music, dramas, movies, sports and

electronic games.

• “Dolby Virtual

”

: Uses the TV speakers to simulate the surround effect produced by a multi

channel system.

• “Off”: Flat response.

Tips

• You can change sound effect by pressing 9 repeatedly.

• If you set “Auto Volume” to “On”, “Dolby Virtual” changes to “Standard”.

Treble

Adjusts higher-pitched sounds.

Bass

Adjusts lower-pitched sounds.

Balance

Emphasizes left or right speaker balance.

Reset

Resets all the sound settings to the factory settings.

Dual Sound

Selects the sound from the speaker for a stereo or bilingual broadcast.

• “Stereo”, “Mono”: For a stereo broadcast.

• “A”/“B”/“Mono”: For a bilingual broadcast, select “A” for sound channel 1, “B”

for sound channel 2, or “Mono” for a mono channel, if available.

Tip

If you select other equipment connected to the TV, set “Dual Sound” to “Stereo”, “A” or “B”.

Auto Volume

Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend

to be louder than programmes).

TV Speakers

Turns off the TV speakers e.g. to listen to the sound through external audio

equipment connected to the TV.

• “On”: the sound is output from the TV speakers.

• “One Time Off”: the TV speakers are temporarily turned off allowing you to listen

to the sound from external audio equipment.

• “Permanent Off”: the TV speakers are permanently turned off allowing you to

listen to the sound from external audio equipment.

Tips

• To turn on the TV speakers again, change to on.

• The “One Time Off” option automatically returns to “On” when the TV set is switched off.

• “Sound Adjustment” options are not available if “One Time Off” or “Permanent Off” have

been selected.

Sound Adjustment

Sound Effect

Tr eble

Bass

Balance

Reset

Dual Sound

Auto Volume

TV Speakers

Standard

50

0

Mono

On

Select:

Enter:

Exit:

MENU

Back:

010COV.book Page 14 Wednesday, April 18, 2007 3:53 PM

15

GB

KLV-40/32/26U25xx

3-216-582-31(0)

Using MENU Functions

Features menu

You can select the options listed below on the

Features menu. To select options in “Settings”,

see “Navigating through menus” (page 12).

Screen

Changes the screen format.

• “Auto Format”: Automatically changes the screen format according to the

broadcast signal.

• “Screen Format”: For details about the screen format, see page 11

• “Vertical Size”: Adjusts the vertical size of the picture when the screen format is

set to Smart.

Tips

• Even if you have selected “On” or “Off” in “Auto Format”, you can always modify the

format of the screen by pressing repeatedly.

• “Auto Format” is available for PAL and SECAM signals only.

Power Saving

Selects the power saving mode to reduce the power consumption of the TV.

• “Standard”: Default settings.

• “Reduce”: Reduces the power consumption of the TV.

• “Picture Off”: Switches off the picture. You can listen to the sound with the picture

off.

AV2 Output

Sets a signal to be output through the socket labelled / 2 on the rear of the

TV. If you connect a VCR to the / 2 socket, you can then record from the

equipment connected to other sockets of the TV.

• “TV”: Outputs a broadcast.

• “Auto”: Outputs whatever is being viewed on the screen (except signals from the

/ 3, HDMI IN 6, HDMI IN 7 and PC sockets).

RGB Center

Adjusts the horizontal picture position so that the picture is in the middle of the

screen.

Tip

This option is only available if an RGB source has been connected to the Scarts connectors

1/ 1

or 2/ 2 on the rear of the TV.

PC Adjustment

Customizes the TV screen as a PC monitor.

Tip

This option is only available if you are in PC Mode.

• “Phase”: Adjust the screen when a part of a displayed text or image is not clear.

• “Pitch”: Enlarges or shrinkes the screen size horizontally.

• “H Center”: Moves the screen to the left or to the right.

• “V Lines”: Corrects the picture lines while viewing an RGB input signal from the

PC connector.

• “Power saving”: Turns to standby mode if no PC signal is received.

• “Reset”: Resets to the factory settings.

Features

Select:

Enter:

Exit:

MENU

Back:

Screen

Power Saving

AV2 Output

RGB Center

PC Adjustment

Sleep Timer

Standard

TV

0

Off

Continued

010COV.book Page 15 Wednesday, April 18, 2007 3:53 PM

16

GB

KLV-40/32/26U25xx

3-216-582-31(0)

Set-up menu

Sleep Timer

Sets a period of time after which the TV automatically switches itself into standby

mode.

When the Sleep Timer is activated, the indicator on the TV (front) lights up in

amber.

Tips

• If you switch off the TV and switch it on again, “Sleep Timer” is reset to “Off”.

• “Sleep timer will end soon. Power will be turned off” appears on the screen one minute

before the TV switches to standby mode.

You can select the options listed below on the

Set-up menu. To select options in “Settings”, see

“Navigating through menus” (page 12).

Auto Start-up

Starts the “first time operation menu” to select the language and country/region, and

tune in all available channels.

Language

Selects the language in which the menus are displayed.

Country

Selects the country/region where you operate the TV.

Tip

The country/region in which you want to use the TV does not appear in the list, select “-”

instead of a country/region.

Auto Tuning

Tunes in all the available channels.

Programme Sorting

Changes the order in which the channels are stored on the TV.

1 Press

F/f to select the channel you want to move to a new position,

then press

g.

2 Press

F/f to select the new position for your channel, then press .

AV Preset

Assigns a name to any equipment connected to the side and rear sockets.

1 Press

F/f to select the desired input source, then press .

2 Press

F/f to select the desired option below, then press .

• AV1 (or AV2/ AV3/ AV4/ PC/ HDMI 1/HDMI 2), VIDEO, DVD, CABLE, GAME,

CAM, SAT

: Uses one of the preset labels to assign a name to connected equipment.

• “Edit”: Creates your own label (Not available for PC,

HDMI 1, HDMI 2).

• “Skip”: Skips an input source that is not connected to any equipment when you

press F/f to select the input source.

Sound Offset

Sets an independent volume level to each equipment connected to the TV.

Set Up

Auto Start Up

Language

Country

Auto Tuning

Programme Sorting

AV Preset

Sound Offset

Manual Programme Preset

English

-

Select:

Enter:

Exit:

MENU

Back:

010COV.book Page 16 Wednesday, April 18, 2007 3:53 PM

17

GB

KLV-40/32/26U25xx

3-216-582-31(0)

Using MENU Functions

Manual Programme

Preset

Before selecting “Label”/“AFT”/“Audio Filter”/“Skip”/“Decoder”, press F/f to

select the programme number you want to modify. Then, press .

System

Presets programme channels manually.

1 Press

F/f to select “System”, then press .

2 Press

F/f to select one of the following TV broadcast systems, then

press

G.

B/G: For western European countries/regions

D/K: For eastern European countries/regions

L: For France

I: For the United Kingdom

Note

Depending on the country/region selected for “Country” (page 5), this option may not be

available.

Channel

1 Press

F/f to select “Channel”, then press .

2 Press

F/f to select “S” (for cable channels) or “C” (for terrestrial

channels), then press

g.

3 Tune the channels as follows:

If you do not know the channel number (frequency)

Press F/f to search for the next available channel. When a channel has been found,

the search will stop. To continue searching, press

F/f.

If you know the channel number (frequency)

Press the number buttons to enter the channel number of the broadcast you want or

your VCR channel number.

4 Press to jump to “Confirm”, then press .

5 Press

f to select “OK”, then press .

Repeat the procedure above to preset other channels manually.

Label

Assigns a name of your choice, up to five letters or numbers, to the selected channel.

AFT

Allows you to fine-tune the selected programme number manually if you feel that a

slight tuning adjustment will improve the picture quality.

Audio Filter

Improves the sound for individual channels in the case of distortion in mono

broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or

intermittent sound muting when watching mono programmes.

If you do not experience any sound distortion, we recommend that you leave this

option set to the factory setting “Off”.

Notes

• You cannot receive stereo or dual sound when “Low” or “High” is selected.

• “Audio Filter” is not available when “System” is set to “L”.

Skip

Skips unused channels when you press PROG +/- to select channels. (You can still

select a skipped channel using the number buttons.)

Decoder

Views and records the scrambled channel selected when using a decoder connected

directly to scart connector / 1, or to scart connector / 2 via a VCR.

Note

Depending on the country/region selected for “Country” (page 5), this option may not be

available.

010COV.book Page 17 Wednesday, April 18, 2007 3:53 PM

18

GB

KLV-40/32/26U25xx

3-216-582-31(0)

Connecting optional equipment

Using Optional Equipment

You can connect a wide range of optional equipment to your TV. Connecting cables are not supplied.

Connecting to the TV (side)

Headphones

S VHS/Hi8/DVC

camcorder

To connect Do this

S VHS/Hi8/DVC

camcorder A

Connect to the S video socket

4 or the video socket 4,

and the audio sockets 4. To

avoid picture noise, do not connect

the camcorder to the video socket

4 and the S video socket

4 at the same time. If you

connect mono equipment, connect

to the L socket 4, and set

“Dual Sound” to “A” (page 14).

Headphones B Connect to the i socket to listen to

sound from the TV on headphones.

Additional operations

To Do this

Access the Input

signal index table

Press to access the Input signal

index table. (Then, only in TV

mode, press

g.) To select an input

source, press

F/f, then press .

010COV.book Page 18 Wednesday, April 18, 2007 3:53 PM

19

GB

KLV-40/32/26U25xx

3-216-582-31(0)

Using Optional Equipment

Connecting to the TV (rear)

DVD player

with component output

Decoder

DVD recorder

VCR

Hi-Fi

Video game equipment

DVD player

Decoder

PC

DVD

player

Digital

satellite

receiver

DVD

player

Digital

satellite

receiver

To connect Do this

PC C Connect to the PC /

sockets. It is recommended to use

a PC cable with ferrites.

Digital satellite

receiver or DVD

player D, E

Connect to the HDMI IN 6 or 7

socket if the equipment has a

HDMI socket. The digital video

and audio signals are input from

the equipment. If the equipment

has a DVI socket, connect the DVI

socket to the HDMI IN 7 socket

through a DVI - HDMI adaptor

interface (not supplied), and

connect the equipment’s audio out

sockets to the audio in HDMI IN 7

sockets.

Notes

• The HDMI sockets only support

the following video inputs: 480i,

480p, 576i, 576p, 720p and 1080i.

To connect a PC, please use the PC

socket.

• Be sure to use only an HDMI

cable that bears the HDMI logo.

DVD player with

component output

F

Connect to the component sockets

and the audio sockets / 3.

Video game

equipment, DVD

player or decoder

G

Connect to the scart socket /

1. When you connect the

decoder, the scrambled signal from

the TV tuner is output to the

decoder, then the unscrambled

signal is output from the decoder.

DVD recorder or

VCR that supports

SMARTLINK H

Connect to the scart socket /

2. SMARTLINK is a direct

link between the TV and a VCR/

DVD recorder.

Hi-Fi audio

equipment I

Connect to the audio output

sockets to listen to the sound

from the TV on Hi-Fi audio

equipment.

010COV.book Page 19 Wednesday, April 18, 2007 3:53 PM

20

GB

KLV-40/32/26U25xx

3-216-582-31(0)

Viewing pictures from

connected equipment

Switch on the connected equipment, then

perform one of the following operation.

For equipment connected to the scart sockets using a

fully-wired 21-pin scart lead

Start playback on the connected equipment.

The picture from the connected equipment appears on

the screen.

For an auto-tuned VCR (page 4)

In TV mode, press PROG +/-, or the number buttons,

to select the video channel.

For other connected equipment

Press / repeatedly until the correct input

symbol (see below) appears on the screen.

Additional operations

AV1/ AV1, AV2/ AV2:

Audio/video or RGB input signal through the scart

socket / 1 or 2. appears only if an RGB

source has been connected.

AV3:

Component input signal through the Y, P

B/CB, PR/CR

sockets / 3, and audio input signal through the

L, R sockets / 3.

AV4/ AV4:

Video input signal through the video socket 4, and

audio input signal through the L (MONO), R audio

sockets 4. appears only if the equipment is

connected to the S video socket 4 instead of the

video socket 4, and S video input signal is input

through the S video socket 4.

5:

RGB input signal through the PC connectors 5, and

audio input signal through the socket .

AV6/ AV7:

Digital audio/video signal is input through the HDMI IN

6, 7 socket. Audio input signal is analogue only if the

equipment has been connected using the DVI and audio

out socket.

To Do this

Return to the normal

TV operation

Press .

Access the Input

signal index table

Press to access the Input signal

index table. (Then, only in

TV

mode, press

g.) To select an input

source, press

F/f, then press .

To Do this

010COV.book Page 20 Wednesday, April 18, 2007 3:53 PM

Strona jest ładowana ...

Sony KLV-26U25 Instrukcja obsługi

Sony KLV-26U25 Instrukcja obsługi

Powiązane dokumenty

Inne dokumenty