Cameo PIXBAR® SMD IP G2 Instrukcja obsługi

USER´S MANUAL

BEDIENUNGSANLEITUNG

MANUEL D`UTILISATION

MANUAL DE USUARIO

INSTRUKCJA OBSŁUGI

MANUALE D‘ USO

PIXBAR® G2 SMD

IP65 SMD LED BAR

CLPBSMDIPG2

RGBW

CONTENTS / INHALTSVERZEICHNIS / CONTENU /

CONTENIDO / TREŚĆ / CONTENUTO

ENGLISH

INFORMATION ON THIS USER MANUAL 6

INTENDED USE 6

DEFINITIONS AND SYMBOL EXPLANATIONS 6

SAFETY INSTRUCTIONS 7

NOTES ON PORTABLE OUTDOOR DEVICES 10

PACKAGING CONTENT 10

INTRODUCTION 11

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 12

OPERATION 13

INSTALLATION 23

FROST FILTER 27

GLARE SHIELD 27

CARE, MAINTENANCE AND REPAIR 28

OPTIONAL ACCESSORIES 29

DIMENSIONS 30

TECHNICAL SPECIFICATIONS 31

EXPLANATION OF IP PROTECTION CLASS 32

MINIMUM DISTANCE TO ILLUMINATED SURFACE 33

MINIMUM DISTANCE TO NORMALLY FLAMMABLE MATERIALS 33

DISPOSAL 33

MANUFACTURER’S DECLARATIONS 34

DEUTSCH

INFORMATIONEN ZU DIESER BEDIENUNGSANLEITUNG 35

BESTIMMUNGSGEMÄSSER GEBRAUCH 35

BEGRIFFS- UND SYMBOLERKLÄRUNGEN 35

SICHERHEITSHINWEISE 36

HINWEISE FÜR ORTSVERÄNDERLICHE OUTDOOR-GERÄTE 40

LIEFERUMFANG 40

EINFÜHRUNG 41

ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 42

BEDIENUNG 43

MONTAGE 54

FROSTFILTER 58

BLENDSCHUTZ 58

PFLEGE, WARTUNG UND REPARATUR 59

OPTIONALES ZUBEHÖR 60

ABMESSUNGEN 61

TECHNISCHE DATEN 62

ERLÄUTERUNGEN ZUR IP-SCHUTZART 63

MINDESTABSTAND ZUR BELEUCHTETEN FLÄCHE 64

MINDESTABSTAND ZU NORMAL ENTFLAMMBAREN MATERIALIEN 64

ENTSORGUNG 64

HERSTELLERERKLÄRUNGEN 65

FRANÇAIS

INFORMATIONS SUR CE MANUEL D'UTILISATION 66

UTILISATION PRÉVUE 66

DÉFINITIONS ET EXPLICATION DES PICTOGRAMMES 66

CONSIGNES DE SÉCURITÉ 67

NOTES SUR LES APPAREILS PORTABLES POUR EXTÉRIEUR 71

CONTENU DU CARTON 71

INTRODUCTION 72

CONNECTEURS, UTILISATION ET INDICATEURS 73

UTILISATION 75

INSTALLATION 86

FILTRE FROST 90

ÉCRAN ANTI-ÉBLOUISSEMENT 90

ENTRETIEN, MAINTENANCE ET RÉPARATIONS 91

ACCESSOIRES EN OPTION 92

DIMENSIONS 93

CARACTÉRISTIQUES TECHNIQUES 94

EXPLICATION DE LA CLASSE DE PROTECTION IP 96

DISTANCE MINIMALE PAR RAPPORT À LA SURFACE ÉCLAIRÉE: 97

DISTANCE MINIMALE PAR RAPPORT AUX MATÉRIAUX INFLAMMABLES ORDINAIRES 97

MISE AU REBUT 97

DÉCLARATIONS DU FABRICANT 98

ESPAÑOL

INFORMACIÓN SOBRE ESTE MANUAL DE USUARIO 99

USO PREVISTO 99

DEFINICIONES Y EXPLICACIONES DE LOS SÍMBOLOS 99

INSTRUCCIONES DE SEGURIDAD 100

INDICACIONES PARA EQUIPOS PORTÁTILES DE EXTERIOR 103

ELEMENTOS SUMINISTRADOS 104

INTRODUCCIÓN 104

CONEXIONES, CONTROLES E INDICADORES 106

OPERACIÓN 107

MONTAJE 118

FILTRO FROST 122

PROTECCIÓN ANTIRREFLEJO 122

CUIDADO, MANTENIMIENTO Y REPARACIÓN 123

ACCESORIOS OPCIONALES 124

DIMENSIONES 125

CARACTERÍSTICAS TÉCNICAS 126

EXPLICACIÓN SOBRE LA CLASE DE PROTECCIÓN IP 128

DISTANCIA MÍNIMA A LA SUPERFICIE ILUMINADA 128

DISTANCIA MÍNIMA A MATERIALES NORMALMENTE INFLAMABLES 128

ELIMINACIÓN 129

DECLARACIÓN DEL FABRICANTE 129

POLSKI

INFORMACJE NA TEMAT NINIEJSZEJ INSTRUKCJI OBSŁUGI 131

ZAMIERZONE ZASTOSOWANIE 131

DEFINICJE I OBJAŚNIENIA SYMBOLI 131

INSTRUKCJE BEZPIECZEŃSTWA 132

UWAGI DOTYCZĄCE PRZENOŚNYCH URZĄDZEŃ ZEWNĘTRZNYCH 135

ZAWARTOŚĆ OPAKOWANIA 136

WPROWADZENIE 136

PRZYŁĄCZA, ELEMENTY OBSŁUGI I WSKAŹNIKI 138

OBSŁUGA 139

INSTALACJA 150

FILTR FROST 154

OSŁONA PRZECIWODBLASKOWA 154

PIELĘGNACJA, KONSERWACJA I NAPRAWA 155

AKCESORIA OPCJONALNE 156

WYMIARY 157

SPECYFIKACJE TECHNICZNE 158

WYJAŚNIENIE KLASY OCHRONY IP 159

MINIMALNA ODLEGŁOŚĆ OD OŚWIETLANEJ POWIERZCHNI: 160

MINIMALNA ODLEGŁOŚĆ OD NORMALNIE ŁATWOPALNYCH MATERIAŁÓW: 160

UTYLIZACJA 160

DEKLARACJE PRODUCENTA 161

CONTENTS / INHALTSVERZEICHNIS / CONTENU /

CONTENIDO / TREŚĆ / CONTENUTO

ITALIANO

INFORMAZIONI SU QUESTO MANUALE D’ISTRUZIONI 162

USO CONFORME 162

SPIEGAZIONE DI TERMINI E SIMBOLI 162

INDICAZIONI SULLA SICUREZZA 163

AVVERTENZE PER DISPOSITIVI PORTATILI PER ESTERNI 166

DOTAZIONE 167

INTRODUZIONE 167

CONNESSIONI, ELEMENTI DI COMANDO E INDICATORI 169

UTILIZZO 170

MONTAGGIO 181

FILTRO FROST 185

PROTEZIONE ANTIRIFLESSO 185

CURA, MANUTENZIONE E RIPARAZIONE 186

ACCESSORI OPZIONALI 187

DIMENSIONI (mm) 188

DATI TECNICI 189

SPIEGAZIONI SULLA CLASSE DI PROTEZIONE IP 191

DISTANZA MINIMA DALLA SUPERFICIE ILLUMINATA 191

DISTANZA MINIMA DA MATERIALI NORMALMENTE INFIAMMABILI 191

SMALTIMENTO 192

DICHIARAZIONI DEL FABBRICANTE 192

DMX CONTROL / DMX STEUERUNG / PILOTAGE DMX /

CONTROL DMX / STEROWANIE DMX / CONTROLLO 194

6

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

ENGLISH

YOU HAVE MADE THE RIGHT CHOICE!

This device has been developed and manufactured to the highest quality standards to ensure

many years of trouble-free operation. Please read this user manual carefully to be able to quickly

put your new Cameo Light product to optimum use. Further information about Cameo Light is

available on our website CAMEOLIGHT.COM.

INFORMATION ON THIS USER MANUAL

• Carefully read the safety instructions and the entire manual before operating the device.

• Observe the warnings on the device and in the user manual.

• Always keep the user manual within reach.

• If you sell or pass on the device, it is important that you also include this user manual, as it is

an integral part of the product.

INTENDED USE

The product is a device for event technology!

This product has been developed for professional use in the field of event technology and is not

suitable for use as domestic lighting!

Furthermore, this product is only intended for qualified users with specialist knowledge of event

technology!

Use of the product outside the specified technical data and operating conditions is considered

improper use!

Liability is exempted when damage and third-party damage to persons and property is caused by

inappropriate use!

The product is not suitable for:

• Use by persons (including children) with limited physical, sensory or mental abilities or lack of

experience and knowledge.

• Children (children must be instructed not to play with the device).

DEFINITIONS AND SYMBOL EXPLANATIONS

1. DANGER: The word DANGER, possibly in combination with a symbol, indicates immediately

dangerous situations or conditions for life and limb.

2. WARNING: The word WARNING, possibly in combination with a symbol, indicates potentially

dangerous situations or conditions for life and limb.

3. CAUTION: The word CAUTION, possibly in combination with a symbol, is used to indicate situa-

tions or conditions that may lead to injury.

4. ATTENTION: The word ATTENTION, possibly in combination with a symbol, refers to situations

or conditions that can lead to damage to property and/or the environment.

7

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

This symbol identiﬁes hazards that can cause electric shock.

This symbol identiﬁes hazardous areas or hazardous situations.

This symbol indicates hazards caused by hot surfaces.

This symbol indicates hazards caused by intense light sources.

This symbol indicates a device in which there are no user-replaceable parts.

This symbol indicates additional information on the operation of the product.

SAFETY INSTRUCTIONS

DANGER:

1. Do not open the device and do not perform any modifications.

2. If your device no longer functions properly, if liquids or objects get inside it or if it

has been damaged in any other way, switch it off immediately and disconnect it

from the mains. The device may be repaired only by authorised repair technicians.

3. For devices of protection class 1, the protective earth conductor must be connected

correctly. Never disconnect the protective earth conductor. Devices of protection

class 2 do not have a protective earth conductor.

4. Ensure that live cables are not kinked or otherwise mechanically damaged.

5. Never bypass the device fuse.

WARNING:

1. The device must not be used if it shows obvious signs of damage.

2. The device may only be installed in a voltage-free state.

3. If the power cable of the device is damaged, do not operate the device.

4. Permanently connected power cables may only be replaced by a qualified person.

ATTENTION:

1. Do not switch on the device if it has been exposed to extreme temperature ﬂuctu-

ations (for example, following transport). Moisture and condensation can damage

the device. Switch on the device only when it has reached ambient temperature.

2. Make sure that the voltage and frequency of the mains supply correspond to the

values indicated on the device. If the device has a voltage selector switch, do not

turn the device on until it has been set correctly. Use only suitable power cables.

8

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

3. To disconnect the device from the mains at all poles, it is not sufﬁcient to press the

on/off switch on the device.

4. Make sure that the fuse used corresponds to the type printed on the device.

5. Make sure that appropriate measures have been taken against overvoltage (e.g.

lightning strike).

6. Observe the speciﬁed maximum output current on devices with Power Out connec-

tion. Ensure that the total current consumption of all connected devices does not

exceed the speciﬁed value.

7. Only replace pluggable mains cables with equivalent cables that correspond to the

cable originally supplied. The cross-section must not fall below the cross-section

of the original cable.

8. Connect the device only to compliant, tested and undamaged power outlets.

DANGER:

1. Choking hazard! Plastic bags and small parts must be kept out of reach of persons

(including children) with reduced physical, sensory or mental capabilities.

2. Danger caused by falling device! Make sure that the device is securely installed

and cannot fall down. Only use suitable stands or mounts (particularly for fixed

installations). Ensure that accessories are properly installed and secured. Ensure

that all applicable safety regulations are observed.

WARNING:

1. Use the device only in the manner intended.

2. Operate the device only with the accessories recommended and intended by the

manufacturer.

3. During installation, observe the safety regulations applicable in your country.

4. After connecting the device, check all cable routes to avoid damage or accidents,

e.g. due to tripping hazards.

5. Always observe the specified minimum distance to normally flammable materials!

Unless explicitly stated, the minimum distance is 0.3 m.

6. Always observe the minimum distance to the illuminated surface specified on the

device!

CAUTION:

1. Moving components such as mounting brackets pose a jamming hazard.

2. In the case of devices with motor-driven components, there is a risk of injury from

the movement of the device. Sudden movement of the device can cause shock

reactions.

3. The exterior surface of the device can become very hot during regular operation.

Ensure that accidental touching of the housing is not possible. Always allow the

device to cool sufficiently before removal, maintenance work and charging etc.

9

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

ATTENTION:

1. Do not install or use the device in the vicinity of radiators, accumulators, stoves, or

other heat sources. Ensure that the device is always installed in such a way that it

can be sufficiently cooled and cannot overheat.

2. Do not place ignition sources such as burning candles near the device.

3. Vents must not be covered and fans must not be blocked.

4. Use the original packaging or packaging provided by the manufacturer for transport.

5. Avoid shock or impact to the device.

6. Observe the IP protection class as well as the ambient conditions such as tempera-

ture and humidity according to the specification.

7. Devices can be continuously further developed. In the event of deviating information on

operating conditions, performance or other device properties between the user manual

and the device labelling, the information on the device always takes priority.

8. The device is not suitable for tropical climates and for operation at elevations

higher than 2000 m above sea level.

9. Unless explicitly stated, the unit is not suitable for operation in marine conditions.

PLEASE NOTE:

For conversion or retroﬁt sets or accessories provided by the manufacturer, it is

essential to observe the instructions included.

CAUTION! IMPORTANT INFORMATION REGARDING LIGHTING PRODUCTS!

1. Never look directly into the beam of light, not even for a short period of time.

2. Never look into the beam of light using optical devices such as a magnifying glass.

3. Stroboscopic effects may cause epileptic seizures in susceptible individuals!

4. Permanently installed lamps are built into these lighting units. These may not be repla-

ced by the user. In the event of a fault, please contact your distribution partner.

SIGNAL TRANSMISSION AND CONTROL BY RADIO

(e.g. W-DMX or audio radio systems, Bluetooth):

The quality and performance of wireless signal transmissions generally depends on

the ambient conditions.

For example, the following factors can impact range and signal stability:

Shielding (e.g. masonry, metal structures, water)

High volumes of radio traffic (e.g. powerful wireless LAN networks)

Interference

Electromagnetic radiation (e.g. LED video screens, dimmers)

All range specifications refer to free-field line-of-sight applications without interference!

The operation of transmission systems is subject to official regulations. These may

vary from region to region and must be checked by the operator before use (e.g. radio

frequency and transmission power).

10

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

WARNING: Devices with wireless signal transmission are not suitable for use in sen-

sitive areas in which radio operation can lead to potentially detrimental interactions.

These include:

• Hospitals, health centres or other healthcare facilities that provide patient treatment

with skilled personnel and equipment.

• Hazardous areas Class I, II and III

• Restricted areas

• Military facilities

• Aircraft or vehicles

• Areas where the use of mobile phones is prohibited

TRANSMISSION VIA W-DMX

WARNING: In general, wireless DMX transmission must not be used for applications

involving safety-related factors that might result in personal injury or property dama-

ge in the event of a failure.

This applies in particular to moving scene or traverse structures, DMX-controlled mo-

tors/lifts or lifting devices for operating DMX-operated platform lifts, hydraulic systems

or comparable moving components.

Furthermore, wireless DMX transmission must not be used to trigger flame or pyro-

technic devices, explosion-driven effects, or to control gas or liquid effects. These

include e.g. CO2 cannons, confetti shooters, water effects or similar.

NOTES ON PORTABLE OUTDOOR DEVICES

1. Temporary operation! Event equipment is generally only designed for temporary

operation.

2. Continuous operation or permanent structural installation – particularly outdoors –

can impair the function, surfaces and seals and accelerate material fatigue.

3. Damage to the surface coating can impair the corrosion protection of the applian-

ce; a damaged surface coating (e.g. scratches) must be restored promptly using

suitable measures.

PACKAGING CONTENT

Remove the product from the packaging and remove all packaging material. Please check the

completeness and integrity of the delivery and notify your distribution partner immediately after

purchase if the delivery is not complete or if it is damaged.

The packaging content includes:

X1 x PIXBAR® SMD IP65 G2 LED Bar

X2 x Sliding mounting feet with folding SPIN16® mounting spigot (pre-assembled)

X1 x Standard frost filter

X1 x Glare shield

X1 x Power cable

X1 x Operating instructions

11

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

INTRODUCTION

PIXBAR® SMD G2 OUTDOOR LED BAR

CLPBSMDIPG2 with 2 x 160 3-in-1 RGB SMD LEDs and 192 cool white SMD LEDs

Top: 160 3-in-1 RGB SMD LEDs

(16 segments can be controlled separately)

Centre: 192 cold white SMD LEDs

(16 segments can be controlled separately)

Bottom: 160 3-in-1 RGB SMD LEDs

(16 segments can be controlled separately)

CONTROL FUNCTIONS

6-channel Direct, 9-channel Strobe, 11-channel Direct, 19-channel Pattern, 25-channel Pattern,

51-channel Strobe RGB Pixel, 64-channel Pixel, 68-channel Pixel Dim, 73-channel Pixel Strobe,

99-channel Strobe RGB Pixel, 112-channel Pixel, 116-channel Pixel Dim, 121-channel Pixel Stro-

be, D7-channel Direct and D8-channel Strobe DMX control

RDM

W-DMX™

Master/Slave modes

Stand-alone functions

FEATURES

• Protection class IP65

• Convection cooling

• Operating voltage: 100 - 240 VAC

The LED Bar is equipped with the RDM standard (Remote Device Management). This remote de-

vice management enables the status query and configuration of RDM end devices via an RDM-ca-

pable controller, such as the optionally available Cameo UNICON (item number CLIREMOTE). The

Cameo UNICON also allows access to the entire spotlight menu.

12

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS

1 2

3 4

5

6

7 8

1 POWER IN

IP65 mains input socket with rubber sealing cap (TRUE1 compatible). Operating voltage 100 - 240

VAC / 50 - 60 Hz. Connection via supplied power cable (when not in use, always close with the

rubber sealing cap).

2 POWER OUT

IP65 mains output socket with rubber sealing cap (TRUE1 compatible). Facilitates power supply to

other CAMEO spotlights. Ensure that the total current consumption of all connected devices does

not exceed the value specified on the device in amperes (A) (when not in use, always close with

the rubber sealing cap).

3 DMX IN

Male IP65 5-pin XLR socket for connecting a DMX control device (e.g. DMX console, when not in

use always close with the rubber sealing cap).

4 DMX OUT

Female IP65 5-pin XLR socket for forwarding the DMX control signal (when not in use, always

close with the rubber sealing cap).

5 OLED DISPLAY

The OLED display shows the currently activated operating mode or the current DMX address

(main display), the menu items in the menu and the numerical value or operational status in

certain menu items.

6 TOUCH-SENSITIVE CONTROL PANELS

MENU- Press MENU to access the main menu. Press again or repeatedly to return to the main

screen.

UP and DOWN – Select the menu items in the main menu (DMX address, operating mode, etc.)

and in the sub-menus using UP and DOWN. Change value or status in a menu item, e.g. DMX

address. To quickly change a value, such as the DMX start address, press and hold UP or DOWN.

13

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

ENTER – Press ENTER to access the menu level to make value or status changes, and to access

one of the sub-menus. Confirm value or status changes by pressing ENTER.

NOTES:

• Before navigating the unit menu, make sure that the control panel is dry and clean

so that its functionality is not impaired.

• Water on the control unit can lead to incorrect operation of the spotlight, e.g. in

outdoor operation. Therefore, after conﬁguring the spotlight, activate the lock

function to prevent incorrect operation by water (Settings -> Display -> Autolock).

Deactivate the lock function: Press UP and DOWN simultaneously for approx. 5

seconds.

7 PRESSURE EQUALISATION ELEMENT

Pressure equalisation element to prevent condensation inside the housing. In order to ensure its

proper function, the element must be protected from dirt.

8 W-DMX™ ANTENNA

Antenna for W-DMX™ control.

CAUTION: To ensure IP65 splash resistance for the DMX and network sockets, the

special input and output sockets must be correctly sealed with the IP65 special plugs

or the rubber sealing caps must be used for sealing. When connected correctly, or

when sealed correctly with the rubber sealing caps, the POWER IN and POWER OUT

sockets are protected from water sprays in accordance with IP65.

OPERATION

NOTE

• As soon as the spotlight is correctly connected to the power supply, the following are displayed

in succession: “Update wait ...” (for service purposes only), “Welcome to Cameo”, the model

name and the software version. After this process, the spotlight is ready for operation and the

previously activated operating mode is launched.

• If there is no input for approx. 30 seconds, the display automatically returns to the main dis-

play.

• Note on the main display in the operating modes with external control: As soon as the control

signal is interrupted, the characters in the display start flashing; if the control signal is present

again, the flashing stops.

• Briefly pressing UP when in the main display rotates the display by 180°.

14

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

SETTING DMX START ADDRESS (DMX address)

Starting from the main display, press MENU to enter the main menu. Now use UP and DOWN to

select the menu item DMX Address and confirm with ENTER. Using the UP and DOWN buttons,

configure the desired DMX start address and press ENTER to confirm (highest value dependent

upon activated DMX mode).

CONFIGURING DMX MODE (DMX Mode)

Starting from the main display, press MENU to enter the main menu. Now use UP and DOWN to

select the menu item DMX Mode and confirm with ENTER. Now select the desired DMX mode

using UP and DOWN and confirm the selection with ENTER. DMX operating modes with DMX delay

channel and group selection (Group 0 - 24) are marked with "D". Tables with the channel assign-

ments can be found in these instructions under DMX CONTROL.

DMX modes with DMX delay channel

The DMX Delay function is a simple way to create a running light effect with a large number of

spotlights that are all the same model and that are all running the same software version. This

is otherwise only achievable with a suitable DMX controller and time-consuming programming.

All the spotlights used (same models, same software version) are set to the same DMX operating

mode with DMX delay channel and controlled via the same DMX start address.

Setting the DMX delay: Select one of the DMX operating modes with DMX delay channel and con-

firm the selection (in the example D7 CH Direct). Assign the spotlights to one of up to 24 groups

as required (plus group 0), whereby several spotlights can also be assigned to one group. The

group number is also the factor by which the set delay time set in the DMX controller is multiplied.

Confirm each entry by pressing ENTER.

15

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

The delay time (delay time of the DMX signal) is set by means of a DMX controller in the separate

DMX delay channel of the corresponding DMX mode (0.0 s to 2.0 s in 0.1 s increments).

Setup example:

STAND-ALONE MENU MASTER / ALONE

In the stand-alone operating modes Direct LED and Play Scene/Loop, the control signal of the

corresponding operating mode can be output to slave units via XLR (DMX OUT) and W-DMX™:

Stand Alone -> Master/Alone -> Master

If the output of the control signal is not desired, the output can be deactivated:

Stand Alone -> Master/Alone -> Alone

A delay can be set for slave units for the time-delayed output of the control signal of the Play Loop

stand-alone operating mode.

Starting from the main display, press MENU to enter the main menu. Now select the Stand Alone

menu item, confirm, select Master/Alone and confirm again.

16

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

This will take you to the submenu for configuring the submenu items (see table).

Master

gain

Send to XLR Control signal is forwarded via DMX OUT

Send to

W-DMX

On Activate DMX control signal forwarding via W-DMX

Off Deactivate sending of the DMX control signal via W-DMX

Force to

pair Pairing with ready-to-pair W-DMX devices

Unlink Disconnect all W-DMX connections

DMX DELAY Set DMX delay for slave units: Off, 0.1 s - 2.0 s

Alone Do not forward control signal

STAND-ALONE DIRECT LED MODE

The stand-alone Direct LED operating mode allows you to set the dimmer, strobe, R, G, B and W

directly on the device, similar to a DMX control unit. In this way, an individual scene can be crea-

ted without an additional DMX controller.

Starting from the main display, press MENU to enter the main menu. Use UP and DOWN to select

Stand Alone, confirm with ENTER, then select Direct LED and confirm again with ENTER. Now

select the menu item you want to edit, confirm the selection, set the desired value and confirm

the entry.

STAND-ALONE OPERATING MODE PLAY SCENE / LOOP

(scene 1 - 8 / 8-step colour sequences 1 - 8)

Both the 8 available scenes and the 8 available loops are pre-programmed at the factory, but can

be customised in the Edit Scene or Edit Loop menu item.

Starting from the main display, press MENU to enter the main menu. Use the UP and DOWN

buttons to select the Stand Alone menu item, confirm with ENTER, then select the Play Scene/

Loop submenu item and confirm again. Now select Scene or Loop, confirm, select the desired

scene or loop and confirm the selection. Set the desired brightness under Dimmer and confirm

the entry.

17

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

TIMER FUNCTION

The timer function allows the stand-alone mode Static to be timer controlled in such a way that

the fade-in time can be set from 0 to 60 minutes, the dwell time from 1 to 24 hours and the

fade-out time from 0 to 60 minutes. After activation of the timer function, the timer control will be

implemented upon the next system start.

Starting from the main display, press MENU to enter the main menu. Select Stand Alone, confirm

the selection, then select Timer and confirm again. Select the setting On under Timer and

confirm. For the individual timer control settings, select Fade In, Dwell Time or Fade Out and

confirm. You can now set the respective value as desired. Confirm all entries. To deactivate the

timer function, select the setting Off under Timer and confirm the entry.

PLEASE NOTE:

The timer function is suitable for use in master/slave operation via cable and W-DMX™.

EDIT SCENE (Edit Scene)

The eight scenes available in the Play Scene/Loop stand-alone mode can be individually edited.

Starting from the main display, press MENU to enter the main menu. Using UP and DOWN you

now select the menu item Stand Alone, confirm with ENTER, then select Edit Loop and confirm

once again. Select the desired scene (Scene 1 - 8) and confirm the selection. Now select the

menu item you want to edit, confirm the selection, set the desired value and confirm the entry.

EDIT LOOP (Edit Loop)

Brightness, step duration and fade time can be set separately for all eight loops. Starting from the

main display, press MENU to enter the main menu. Using UP and DOWN you now select the menu

item Stand Alone, confirm with ENTER, then select Edit Loop and confirm once again. Now

select the desired loop for editing and confirm the selection.

18

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

This will take you to the submenu for configuring the submenu items (see table). The settings for

each loop are made separately and are retained even after restarting the device.

Step selection

Setting the step duration for

the selected step

Setting the fade time for the

selected step

Selection of the scene or

blackout for the selected step

Select scene or blackout or

skip selected step

SLAVE MODE

Standard slave operation: Starting from the main display, press MENU to enter the main menu.

Using the UP and DOWN buttons, you now select the menu item Slave confirm with ENTER,

select the Slave Group 0 and confirm again with ENTER. Connect the slave and master units

(same model, same software version) using a DMX cable or via W-DMX™ and activate one of the

stand-alone operating modes (Direct LED, Play Scene/Loop) in the master unit. The slave unit will

now follow the master unit.

Extended slave operation: If you want to control the slave units by one of the stand-alone

modes Auto Program or Play Loop in master / slave operation, the control signal can be played

back with a time delay of up to 24 steps, the delay is set in the Stand Alone menu Master/Alo-

ne in the master unit, the delay factor in the slave menu of the corresponding fixture (Group). This

is a simple way to create a running light effect with a large number of spotlights that are all the

same model and have the same software version. This is otherwise only possible using a suitable

DMX controller and time-consuming programming. Connect the slave and master units (same

model, same software version) using a DMX cable or via W-DMX™.

19

DMX DEUTSCHFRANCAIS

ESPAÑOL ENGLISH

ITALIANO POLSKI

Set slave group for signal delay

Wireless

Activate W-DMX module

W-DMX module

deactivate

Disconnect all connec-

tions and place in pairing

standby mode

Assign the spotlights to one of up to 24 groups (plus Group 0) according to preference, whereby

several spotlights can be assigned to one group. The group number is also the factor by which the

delay time set in the master unit is multiplied.

Setup example:

SYSTEM SETTINGS (Settings)

Starting from the main display, press MENU to enter the main menu. Using UP and DOWN, select

the menu item Settings and confirm with ENTER.

This will take you to the submenu for setting the submenu items (see table, select with UP and

DOWN, confirm with ENTER, change value or status with UP and DOWN, confirm with ENTER).

SYSTEM SETTINGS (Settings)

=

Wireless settings

Activate W-DMX

W-DMX deactivated

W-DMX mode: Receiver

G3 (G3 transmission standard)

G4s (transmission standard G4s )

Uncouple all units and make them ready for

coupling

20

DMX

ITALIANO

POLSKI

ESPAÑOL

FRANCAIS

DEUTSCHENGLISH

=

Wireless settings

Pair with W-DMX devices. W-DMX must be

enabled on all devices, and the pairing with a

transmitter be retained (Receive Reset).

Send incoming signal to XLR connector

Using the incoming signal from the XLR con-

nector when the W-DMX signal is lost.

No connection between W-DMX signal and

XLR connectors

=

Display settings

Display is rotated by 180° (e.g. for overhead

installation)

No display rotation

Display lighting permanently on

Deactivation of the display lighting after

approx. 20 seconds of inactivity

Function disabled

The controls and display are locked after

approx. 60 seconds without any operation.

Unlock: Press UP and DOWN simultaneously

for approx. 5 seconds

=

Dimming behaviour and PWM frequency

Dimmer curve: The light intensity increases

linearly with the DMX value

Dimmer curve: The light intensity can be ad-

justed ﬁnely in the lower DMX value range and

coarsely in the upper DMX value range

Dimmer curve: The light intensity can be ad-

justed coarsely in the lower DMX value range

and ﬁnely in the upper DMX value range

Light intensity can be ﬁnely adjusted at lower

and higher DMX values and broadly adjusted

at medium DMX values

Select LED PWM frequency

Light responds abruptly to changes in DMX

value

Light behaves like a halogen spotlight with

smooth brightness changes

Strona jest ładowana ...

Cameo PIXBAR® SMD IP G2 Instrukcja obsługi

Cameo PIXBAR® SMD IP G2 Instrukcja obsługi

w innych językach

Powiązane dokumenty