Vermeiren VERSO Instrukcja obsługi

Typ
Instrukcja obsługi
User manual
M A N U E L D ' U T I L I S A T I O N
G E B R U I K S A A N W I J Z I N G
G E B R A U C H S A N W E I S U N G
M A N U A L E D I I S T R U Z I O N I
M A N U A L D E I N S T R U C C I O N E S
I N S T R U K C J A O B S
Ł
U G I
N Á V O D K O B S L U Z E
Verso
Instrukcje dla wyspecjalizowanego
All rights reserved, including translation.
Tous droits réservés, y compris la traduction.
Alle rechten, inclusief vertaling, voorbehouden.
Alle Rechte, auch an der Übersetzung, vorbehalten.
Tutti i diritti riservati (anche sulla traduzione).
Todos los derechos reservados, incluidos los de la
traducción.
Wszelkie prawa zastrzeżone, łącznie z tłumaczeniem.
Všechna práva vyhrazena, včetně překladu.
EN
Instructions for specialist dealer
This instruction manual is part and parcel of the
product and must accompany every product
sold.
Version: B, 2023-06
FR
Instructions pour les distributeurs
Ce manuel d'instructions fait partie du produit et
doit accompagner chaque produit vendu.
Version : B, 2023-06
NL
Instructies voor de vakhandelaar
Deze handleiding is deel van het product en
dient bij iedere product te worden geleverd.
Versie: B, 2023-06
DE
Hinweise für den Fachhändler
Diese Gebrauchsanweisung ist Bestand-teil des
Produkts und ist bei jeder Produkts
auszuhändigen.
Version: B, 2023-06
IT
Istruzioni per il rivenditore
Il presente Manuale di istruzioni è parte
integrante del prodotto e deve essere fornito
assieme alla prodotto.
Versione: B, 2023-06
ES
Instrucciones destinadas a los distribuidores
especializados
El presente manual de instrucciones es parte
integrante del producto y se debe adjuntar a
todas las producto que se vendan.
Versión: B, 2023-06
PL
sprzedawcy
Niniejsza instrukcja obsługi jest nieodłączną
częścią produktu i musi być dołączona do
każdego sprzedawanego produktu.
Wersja: B, 2023-06
CS
Pokyny pro specializovaného prodejce
Tento návod k obsluze je součástí dodávky a
musí být součástí každého prodaného
produktu.
Verze: B, 2023-06
Basic UDI: 5415174VersoG7
Multi version: A, 2023-06
Verso
2023-06
Content
1
EN
NL
Content
Content ....................................................................................................................... 1
Preface........................................................................................................................ 2
1 Your product .................................................................................................. 3
1.1 Options .......................................................................................................... 3
2 Before use ..................................................................................................... 4
2.1 Intended use ................................................................................................. 4
2.2 General safety instructions ............................................................................ 4
2.3 Symbols on the wheelchair ........................................................................... 5
2.4 Transport ....................................................................................................... 5
2.5 Assembly/Disassembly ................................................................................. 6
2.6 First use and storage .................................................................................... 8
3 Using your wheelchair .................................................................................. 9
3.1 First ride ........................................................................................................ 9
3.2 Driving outdoors ............................................................................................ 9
3.3 Operating console ....................................................................................... 10
3.4 Brake and free-wheel lever ......................................................................... 12
3.5 Moving to/from wheelchair .......................................................................... 12
3.6 Comfort adjustments ................................................................................... 13
3.7 Battery status and charging ........................................................................ 15
3.8 Switching the electric device On/Off ............................................................ 16
3.9 Mounting / removing battery ........................................................................ 16
4 Maintenance ................................................................................................ 17
4.1 Time of maintenance ................................................................................... 17
4.2 Instructions for maintenance ....................................................................... 17
4.3 Troubleshooting .......................................................................................... 18
4.4 Expected lifespan ........................................................................................ 18
4.5 Reuse .......................................................................................................... 18
4.6 End of use ................................................................................................... 19
5 Troubleshooting .......................................................................................... 20
6 Technical specifications ............................................................................. 21
Verso
2023-06
Preface
2
EN
NL
Preface
Congratulations! You are now owner of a Vermeiren wheelchair!
This wheelchair is made by qualified and committed personnel. It is designed and produced
according to high quality standards guarded by Vermeiren.
Thanks for your trust in the products of Vermeiren. To support you on the use of this wheelchair
and its operating options, this manual is offered. Please read it carefully; it will help you to get
familiar with the operation, capabilities and limitations of your wheelchair.
If you still have questions after reading this manual, do not hesitate to contact your specialist
dealer. He/she will be glad to help you on this subject.
Important note
To ensure your safety, and to prolong the lifetime of your product, please take good care of it and
have it checked and serviced on a regular basis.
This manual reflects the latest product developments. Vermeiren has the right to implement
changes to this type of product without being imposed to any obligation to adapt or replace similar
products previously delivered.
Pictures are used to clarify the instructions in this manual. Details of the depicted product may
deviate from your product.
Information available
On our website http://www.vermeiren.com/ you will always find the most recent version of
following information. Please consult this website regularly for possible updates.
Visually impaired people can download the electronic version of this manual and have it read out
by means of a text-to-speech software application.
This user manual
For user and specialist dealer
Installation instructions (Instructions for detail adjustments and (dis)assembly)
For specialist dealer
Service manual for wheelchairs
For specialist dealer
EC declaration of conformity
Verso
2023-06
Your product
3
EN
NL
1 Your product
1. Backrest
2. Operating console
3. Armrest
4. Seat
5. Footrest
6.
Footplate
7. Front wheels
8. Rear wheels / Driving wheels with motors
9. Battery
10. Cross
11. Identification plate
1.1 Options
Contact your specialist dealer about options. He will gladly advise you.
1
2
3
4
5
6
9
7
10
8
11
Verso
2023-06
Before use
4
EN
NL
2 Before use
2.1 Intended use
In this paragraph a brief description of the intended use of your wheelchair is given. Additionally,
relevant warnings are added to the instructions in the other paragraphs. In this way we would like
to make you aware of the possible misuse that may appear.
This wheelchair is suitable for indoor and outdoor use.
This wheelchair is designed and produced solely to transport/transfer one (1) person with a
maximum weight of 130kg. It is not designed for transportation of goods or objects, nor for any
use other than previously described.
This wheelchair can be operated by the user sitting in the wheelchair, or it can be pushed by
an attendant. You should NOT use this wheelchair without attendant if you suffer from physical
or mental impairments that may put you, or other people, in danger when driving the
wheelchair. For this reason, consult your doctor first and make sure that your specialist dealer
is informed about his advice.
Only use accessories and spare parts approved by Vermeiren.
Please read all technical details and limits of your wheelchair in chapter 6.
The warranty on this product is based on normal use and maintenance as described in this
manual. Damage to your product caused by improper use or lack of maintenance will cause
the warranty to lapse.
2.2 General safety instructions
Risk of injuries and/or damage
Please read and follow the instructions in this manual. Oth
erwise you may get injured or your
wheelchair may get damaged.
Keep the following general warnings in mind during use:
Do not use your wheelchair if you are under influence of alcohol, medicines or other
substances that may influence your driving abilities.
Be aware that some parts of your wheelchair may get very hot or cold due to ambient
temperature, solar radiation, heating devices or due to the motor drive during the ride. Be
careful when touching. Wear protective clothing if the weather is cold. After a ride, wait until
the wheelchair/motor has cooled down.
Before switching the wheelchair on, be aware of the environment/situation in which you are
located. Adjust your speed to this before driving off. We advise you to use the slowest speed
setting to drive indoors. For outdoor driving you can adjust the speed to a suitable speed at
which you feel comfortable and safe.
ALWAYS keep in mind that your wheelchair may stop suddenly due to a discharged battery
or a protection that prevents your wheelchair from further damage. Also check the possible
causes mentioned in § 4.3. Use your safety belt to prevent injuries.
Your wheelchair has been tested for electromagnetic compatibility and complies with the
standard, see chapter 6. Nevertheless, sources of electromagnetic fields may influence the
driving performance of your wheelchair, such as the fields of mobile phones, power
generators or high-power energy sources. On the other hand, the electronics of your
wheelchair can affect other electronic appliances too, such as alarm systems of shops and
automatic doors. We therefore advise you to check your wheelchair regularly for damage and
wear, since these may enlarge the interference (see also chapter 4).
Only drive on flat surfaces where both driving wheels touch the ground and where there is
sufficient contact to operate the wheelchair safely.
CAUTION
Verso
2023-06
Before use
5
EN
NL
Alterations or substitutions should not be made to the wheelchair securement points or to
structural and frame parts or components without consulting the wheelchair manufacturer.
Make sure that your hands, clothes, belts, buckles or jewellery don’t get caught by wheels or
other moving parts during use.
Be aware that your wheelchair may interfere with some types of anti-theft systems, depending on
the settings used. This may cause the shop's alarm to go off.
In case a serious incident has occurred involving your product, notify Vermeiren or your specialist
dealer as well as the competent authority in your country.
2.3 Symbols on the wheelchair
The symbols in following list are applicable to your wheelchair. Symbols can be found in the
relevant ISO standard (ISO 7000, ISO 7001 and IEC 417).
Maximum weight of the user in kg
Indoor/outdoor use (battery charger excluded)
Indoor use only (battery charger)
Maximum safe slope in ° (degrees).
Maximum speed
Type designation
Risk of entrapment
2.4 Transport
Risk of damage
Take action to protect the wheelchair from being damaged during transport.
2.4.1 Moving out of the way
Use the operating console to drive the wheelchair to its destination.
Otherwise, put the wheelchair in free-wheel mode (see §3.4) and use the push bar to move it.
2.4.2 Transport by aircraft
When transporting the wheelchair by aircraft, lock
and disconnect the battery before handing the
wheelchair over to airport personnel (see §3.9 and
§3.8). The battery can remain in the wheelchair.
Consult your airline for the correct handling
procedure.
CAUTION
Verso
2023-06
Before use
6
EN
NL
2.4.3 Transport by vehicle, as luggage
The best way to transport your electric wheelchair in the car is to drive it by using ramps. If you
are not experienced to drive the electric wheelchair using ramps, you can put the wheelchair in
neutral mode and push the wheelchair in the car using ramps. If necessary, disassemble the
wheelchair.
1. As the wheelchair user, transfer to a car seat, see §3.5.
2. Remove all moveable parts prior to transport (footrests, arm supports, etc.).
3. Store moveable parts safely behind the passenger seat or in the luggage compartment.
4. Drive or push the electric wheelchair in the car using ramps, or lift the wheelchair in the car
with the help of 2 persons by grasping the fixed parts of the frames.
5. Attach the solid parts of the frame securely to the vehicle.
6. Place the wheelchair in drive mode (engaging the parking brakes) and check that the operating
console is switched off.
2.5 Assembly/Disassembly
Risk of injuries
Make sure that your fingers, clothes, buckles won’t get trapped during (dis)assembly.
Your dealer delivers the wheelchair fully assembled and explains the various operating elements
and their use. We also provide a further, detailed explanation of the different parts here for
transport purposes
To assemble the powered wheelchair:
1. Unfold the seating frame (A).
2. Place the seating frame on the front wheels and the rear support wheels.
3. Place the drive train (B) unit behind the seating frame.
4. Unscrew the star knob (1) and remove the operating console (2) from the drive train unit.
Place the console in a temporary safe place, e.g. place it over the backrest.
5. Place the hooks of the seat frame (3) on the rods (4) of the drive train unit.
6. Push the seating frame down until an audible click is heard and the frame is securely
attached to the drive train unit, both left and right. Check that the hooks (8) are locked in
downward position.
If the seat frame does not click automatically, place the frame on the drive train unit and
push the hooks (8) down manually.
7. Mount the arm supports (§3.6.2).
8. Mount the footrests (§3.6.1).
9. Slide the operating console into the support on the armrest (5). Tighten the star knob (6)
and secure the cable with the clamps (7).
To disassemble the powered wheelchair:
1. Release the cable from the clamps on the armrest. Loosen the star knob (6) on the
operating console support and slide the console out. Place the console in a temporary safe
place.
2. Pull the hooks (8) on both sides of the lower frame upwards. The drive train unit is now
released from the frame and will tilt backwards onto its support wheels.
3. Lift the seating frame up and away from the drive train unit.
4. Remove the arm supports.
5. Remove the footrests.
6. Fold the seating frame.
7. Place the operating console (2) into the designated support on the drive train unit and
tighten the star knob (1).
CAUTION
Verso
2023-06
Before use
7
EN
NL
A
B
1
2
3
5
6
4
7
8
Verso
2023-06
Before use
8
EN
NL
2.6 First use and storage
Risk of battery damage
Never completely discharge the battery.
Do not interrupt the charging cycle; only disconnect the battery charger when the battery is
fully charged.
Make sure that your wheelchair is stored dry to prevent mould from growing and the upholstery
from being damaged.
Check the technical details for
storage, see chapter
6
.
Ensure that the battery has been fully charged before using your wheelchair, ask your dealer if
this has already been done or not. To charge, follow the charging instructions in §3.7.
CAUTION
Verso
2023-06
Using your wheelchair
9
EN
NL
3 Using your wheelchair
Risk of injuries
First read previous chapters and inform yourself about the intended use. Do NOT use your
wheelchair unless you have read and fully understood all instructions.
Also read the instructions in the operator console manual and battery charger manual!
In case o
f doubts or questions, do not hesitate to contact your local specialist dealer, your care
provider or technical adviser to help you with this.
3.1 First ride
Risk of injuries and damage
Always keep the swing range of footrest and operating console in
mind to prevent bystanders
from being injured or objects from being damaged.
Always unplug the battery charger from the wheelchair before starting to drive.
Make sure that you are familiar with the operation of your wheelchair before using it in
crowded and possibly dangerous places. First exercise at a specious, open area with
little bystanders.
Investigate the effects of shifting the centre of gravity on the behaviour of the wheelchair,
for example on up or down gradients, on laterally
sloping ground, or when overcoming
obstacles. Obtain support from an attendant.
The surface of the controller gets slightly warm during use.
While driving backwards, the speed is reduced.
1. Make sure that:
the wheelchair is on a flat surface;
the battery is fully charged, see § 3.7;
The motor is coupled, see § 3.4;
the wheelchair is adapted to your needs and comfort, see §3.6;
you have the proper sitting position, see § 3.5.
2. Follow the instructions in the operating console manual.
3. Switch on your wheelchair.
4. Turn the speed control to the lowest speed setting.
5. Exercise how to drive and make adjustments to the wheelchair.
6. If you feel confident enough, you can try to drive at higher speed.
7. Now try to turn, in forward and backward direction. Repeat this a few times.
8. Make sure that your wheelchair stands stable, when ending the ride.
9. Switch off your wheelchair.
3.2 Driving outdoors
Risk of accident - Adjust your driving behaviour and speed.
Take the local road traffic law into consideration; it may differ per country. This counts for
driving on pavements, unpaved roads or paved roadways.
Do not drive on roads with heavy traffic.
Take the weather conditions into consideration. Avoid driving by moist weather, extreme heat,
snow, black ice, freezing temperatures; see technical specifications in chapter 6.
Make sure that you are well visible, also during daylight hours, by using fluorescent clothing
and/or by using own lighting at the front and rear side of the wheelchair.
WARNING
CAUTION
WARNING
Verso
2023-06
Using your wheelchair
10
EN
NL
Be aware of other road users to whom your wheelchair may be an
obstacle. Pay special
attention during turning and reversing. If you are not acquainted with how to drive backwards,
first practice in an open area. Indicate the direction you are intending to go before turning.
Try to drive straight in small passages to prevent getting trapped.
Keep the braking distance in mind. Be aware that the braking distance depends on speed,
surface, weather conditions, slope and weight of the user.
3.2.1 Cope with slopes, kerbs, obstacles or ramps
Risk of injuries by unexpected movement
Use a restraining safety belt to secure yourself sitting in the wheelchair.
Pay attention if the road is sandy, has soft ground, holes or gaps that may cause entrapment
of the wheels and/or decreasing of the traction of the driving wheels.
Do NOT drive on slopes, obstacles, steps or kerbs larger than the size described in the
technical specifications in chapter 6.
Always approach a kerb from the front.
Do not put your wheelchair in free-wheel mode on a slope. The wheelchair may start movin
g,
causing injuries to you or bystanders.
Do not use your wheelchair on an escalator or stairs.
Only use ramps approved by Vermeiren and do not exceed their maximum load.
To safely overcome obstacles or slopes, put the wheelchair in its most upright sittin
g position.
Risk of damage
Always park your electric wheelchair on horizontal flat surfaces and on sites that are easily
accessible.
If necessary, take a short run-
up to speed up the wheelchair to mount a slope, obstacle, kerb
or ramp. Prevent that you or your wheelchair has to cope with a large recoil.
Make sure that the wheelchair does not touch the ground or ramp due to the inclination of the
wheelchair.
Be aware that the braking distance on downhill slopes can be significantly larger than on level
ground.
Procedure
Start your drive according to the instructions in § 3.1, step 1.
To move the wheelchair up or down stairs/steps, use lifting equipment or a ramp. If these
are not available, it can be lifted manually by at least two persons, grasping the frame firmly
with both hands. Do not use the backrest, footplate(s), armrests, or wheels to grasp the
wheelchair.
To cope with obstacles or inclinations:
1. Adjust the wheelchair to its most stable position, see § 3.5.
2. Drive as slow as possible to cope with the obstacle or inclination.
3.3 Operating console
Put the joystick in the neutral (central) position before pressing the on/off button, otherwise
the electronics will be
blocked. To release this block, switch the operating console off and
on again.
CAUTION
CAUTION
When you stop on a slope, the brake will work automatically to prevent the wheelchair from
running forward or backward.
Verso
2023-06
Using your wheelchair
11
EN
NL
1. ON/OFF button
2. Battery charge indicator
3. Speed indicator
4. Horn button
5. Speed decrease button
6. Speed increase button
7. Joystick
3.3.1 Technical protections
For your own safety, and to prevent that the wheelchair gets damaged, movements are monitored
by the electronics. This may result in speed decrease or complete stop.
To avoid accidental battery run down, your wheelchair is equipped with an automatic power
shutdown system. This system switches off the operating console automatically when it is not
operated for a while. If this occurs, simply switch your console back on.
Make sure that the free-wheel lever is in braking position BEFORE switching the wheelchair
ON. Electromagnetic brakes do NOT function if the wheelchair is in free-wheel mode. This is
indicated on the operating console. Driving is not possible.
3.3.2 Driving
1. Press the ON/OFF button (1) to switch on the wheelchair.
2. If the lights of the battery charge indicator (2) and speed indicator (3) go on, the wheelchair
is powered and ready to go.
3. Check the battery status indicator. Charge the battery if necessary (see §3.7).
4. Adjust the driving speed: decrease the speed with the speed decrease button (5), or increase
the speed with the speed increase button (6).
5. Start moving the wheelchair by operating the joystick (7) slowly forwards/backwards.
6. The speed will increase when you push the joystick further out of the centre.
7. To turn left or right, push the joystick to the left or right.
8. To brake, move the joystick to neutral position.
9. Press the horn button (4) to alert other road users if necessary.
10. After arrival, check the battery status and press the ON/OFF button to switch off the
wheelchair.
11. Charge the battery if necessary.
3.3.3 Operation console lock
The control system can be locked to prevent unauthorized use.
To lock the powerchair:
1. While the control system is switched on, press and hold the On/Off button.
2. After 1 second the control system will beep. Now release the On/Off button.
3. Deflect the joystick forwards until the control system beeps.
4. Deflect the joystick in reverse until the control system beeps.
5. Release the joystick, there will be a long beep.
6. The powerchair is now locked.
1
2
3
4
5
6
7
Verso
2023-06
Using your wheelchair
12
EN
NL
To unlock the powerchair:
1. Use the On/Off button to switch the control system on. The maximum speed / profile
indicator will be rippling up and down.
2. Deflect the joystick forwards until the control system beeps.
3. Deflect the joystick in reverse until the control system beeps.
4. Release the joystick, there will be a long beep.
5. The powerchair is now unlocked.
3.4 Brake and free-wheel lever
Risk of injuries or damage
Only operate the free-wheel lever when your
wheelchair is turned OFF. An attendant should
operate the free-wheel lever. NEVER operate it from sitting position.
Do not use the free
-
wheel mode on slopes and inclinations
.
Make sure that the free-wheel lever is in its braking position BEFORE switching the
wheelchair ON. Electromagnetic brakes do NOT function if the wheelchair is in free
-wheel
mode. This is indicated on the operating console. Driving is not possible.
Your wheelchair is equipped with electromagnetic brakes. The working of the brakes depends on
the position of the free-wheel lever (1).
The EM brakes function automatically, only if free-
wheel lever (1) is in braking position. In this situation,
the brakes start braking if:
the wheelchair is OFF;
the wheelchair is ON and the joystick is released.
Releasing the joystick makes the wheelchair stop
gently and activates the brakes.
Operation of free-wheel lever:
Turn levers UP to put the wheelchair in free-
wheel mode. Now, the motor is disconnected.
The wheelchair can be moved manually.
Turn levers DOWN to connect the motor to the
drive. This should be done before starting the
wheelchair.
3.5 Moving to/from wheelchair
Risk of injuries or damage
In case you cannot perform the transfer in a safe manner, ask someone to assist you.
Do not stand on the footplate(s) during transfer into or out of the wheelchair.
Transfer
1. Position the wheelchair as close as possible to you when sitting in your chair, couch, seat or
bed.
2. Apply the brakes by turning the free-wheel lever to braking position, see § 3.4.
3. Fold the footplate(s) upwards to prevent standing on them.
4. If necessary, remove one armrest to make room, see § 3.6.2.
5. Transfer to/from the wheelchair using the strength of your arms or with the help of attendant(s)
or lifting equipment.
CAUTION
CAUTION
1
Verso
2023-06
Using your wheelchair
13
EN
NL
Sitting in the wheelchair
1. Sit down on the seat with your lower back against the backrest.
2. Turn the footplate(s) down and put your feet on the footplates.
3. Replace the armrest, if applicable.
4. Make sure that your upper legs are horizontal and that your feet are in a comfortable position.
Adjust if necessary.
5. Make sure that your arms are bent and are resting comfortably on the arm pads. Adjust if
necessary.
Adjusting to stable position
For transport purposes and when you need to negotiate obstacles, the wheelchair must be
adjusted to maximise its stability:
Backrest upright
Footplate folded up
3.6 Comfort adjustments
Risk of injuries or damage
The following comfort adjustments can be done by
the attendant or caretaker. All other
adjustments are done by your specialist dealer according to the installation instructions, see
preface.
Make sure that your fingers, clothes, buckles don’t get trapped during adjustment.
3.6.1 Mounting or removing the footrests
Mounting the footrests is done as follows:
1. Hold the footrest sideways at the outside of the
wheelchair’s frame and mount the tube hood into the
frame.
2. Swing the footrest inwards until it clicks in position.
3. Swing the footplate downwards.
To take off the footrests:
1. Pull lever .
2. Swing the footrest to the outside of the wheelchair until
it comes loose from the guidance.
3. Pull the footrest from the tube hood .
CAUTION
Verso
2023-06
Using your wheelchair
14
EN
NL
3.6.2 Mounting or removing the armrests
The armrests of the wheelchair can be mounted by following
instructions.
1. Mount the armrest in the armrest support until the
screw fits in the sleeve .
2. Make sure the armrest is firmly fixated.
To remove the armrest:
1. Grasp the arm pad and pull the armrest gently out of the
armrest support.
3.6.3 Backrest height
The backrest height can be adjusted into 5 positions.
1. Remove the star knob (1).
2. Slide the backrest upholstery up/down to the desired height.
Make sure that the hole for the star knob in the frame tube
aligns with one of the holes in the upholstery.
3. Replace the star knob and retighten.
3.6.4 Backrest support
The backrest of the wheelchair has a suspension system with adjustable Velcro straps, to adjust
the flexibility of the backrest.
1. Pull the backrest cushion from the Velcro straps of the
backrest.
2. Loosen the Velcro straps.
3. Pull the respective strap to the desired position. The
tension of the individual belts can be varied and the
desired support of the back can be set.
4. Place the back cushion back over the backrest starting
at the front and ending at the back.
5. Secure the Velcro connections by pressing the cushion against the backrest with your hand.
6. Make sure that all straps are secured with Velcro.
3.6.5 Push handle height
The push handles can be adjusted over a distance of 60 mm:
1. Loosen the star knob (1) .
2. Move the handgrip up/down to the desired height.
3. Retighten the star knob (1) .
4. Repeat for the other handle. Make sure that both handles are
firmly secured.
1
1
Verso
2023-06
Using your wheelchair
15
EN
NL
3.7 Battery status and charging
Risk of injuries and damage due to fire
Only use the battery charger delivered with the wheelchair. The use of any other charger may
be dangerous (fire hazard).
The battery charger is only intended to charge the batteries delivered with the wheelchair, not
to charge any other batteries.
Do not
adapt any of the delivered parts, like cables, plugs or battery charger. Never open or
change the battery or the connection points.
Protect the battery and battery charger against flames, high and low temperatures (see chapter
6
), moisture, sunshine, severe shocks (for example dropping). Do NOT use the battery if this
has been the case.
Charge the battery with the battery charger, indoors, in a well-ventilated area,
out of children's
reach.
Risk of damage
Battery self-
discharge and the quiescent current of the connected users will drain the battery
charge slowly. The battery may be irreversibly damaged if the battery is fully discharged.
Therefore, make sure that the battery is charged on time (see 3.7).
Read the storage and maintenance instructions in chapter 4 and technical details in chapter 6
.
Do not charge batteries below 0°C. Move the battery to a warmer place and start charging.
Keep the connection point for the battery charger free of dust and other contamination.
In case of any problems whereby the battery cannot be charged according to following
instructions, please contact your specialist
dealer.
For all information on battery status indication, please read §3.7.
It is recommended to unplug the battery charger from the mains
when not in use. This is to
prevent unnecessary energy consumption.
Always check the battery for damage before charging. Press the charge indicator button for 2
seconds to switch on the battery. When no LED of the charge indicator lights up, the battery may
be damaged. When at least one, but not all LEDs of the charge indicator, is lit, then fully charge
the battery pack before using for the first time.
Do not charge or use a damaged battery, contact your specialist dealer.
To ensure full battery capacity, completely charge the battery with the
charger before using it for the first time. The battery can be recharged at
any time on the wheelchair or while removed from the wheelchair.
Instructions to charge the battery:
1. Switch the battery off.
2. If desired, remove the battery from the battery housing and prevent dirt
or fluids from entering the charging socket.
3. Connect the charger plug to the battery pack .
4. Connect the charger mains plug into the wall socket.
5. The LED indicator on the battery charger will show the status of the charging process:
Red - Charging
Green - Standby / Fully Charged
6. Once the battery is fully charged, remove the battery charger from the wall socket and the
battery.
WARNING
CAUTION
1
Verso
2023-06
Using your wheelchair
16
EN
NL
3.7.1 Battery charge indicator
There are two battery charge indicators:
On the battery pack:
1. Press button on the battery pack.
2. The LED's of the battery charge indicator will indicate the
battery charge level.
Operator console:
When the electric system is switched on, the battery indicator (2,
§3.3) will indicate the battery charge level.
All LEDs on: battery fully charged.
Only red LED on or blinking: immediately recharge battery.
Because of the wiring, both indications can deviate a little bit. In
that case, take the worst charge level indication.
3.8 Switching the electric device On/Off
Press the on/off switch on the side of the battery.
3.9 Mounting / removing battery
The battery can be removed for easy charging away from the wheelchair.
To mount the battery:
1. Place the key and turn the key towards the
unlock symbol.
2. Place the battery in the battery housing as far as
possible. There is only 1 possible way to insert
the battery.
3. Turn the key to the lock symbol.
4. Make sure that the battery is fixed well.
5. Remove the key . (Never remove the key while
riding).
To remove the battery:
1. Place the key .
2. Turn the key to the unlock symbol.
3. Pull the battery gently out of the battery housing.
1
2
1
Unlock
Lock
Verso
2023-06
Maintenance
17
EN
NL
4 Maintenance
4.1 Time of maintenance
Risk of injuries and damage
Repairs and replacements may only be undertaken by trained persons and only genuine
replacement parts of
Vermeiren should be used.
The last page of this manual contains a registration form for the specialist dealer to record
each service.
The service frequency depends on the frequency and intensity of use. Contact your dealer to
agree to a common timetable for inspection/maintenance/repair.
Read the user instructions of the applied battery charger regarding maintenance.
For the maintenance manual, refer to the Vermeiren website: www.vermeiren.com.
Before each use
Inspect the following points:
All parts: present, undamaged and unworn.
All parts: clean, see § 4.2.2.
Wheels, seat, arm rests, footrests and headrest (if applied): well secured.
Battery status: charge the battery when necessary, see §3.7.
Operating console, battery, power module, motors, battery charger, lights and relevant
cables: no damage such as wires that have become frayed, broken or exposed.
Condition of wheels/tyres, see § 4.2.1.
Condition of frame parts: no deformation, instability, weakness or loose connections.
Seat, backrest, arm pads, calf pads and head rest (if applied): no excessive wear (like
dented spots, damage or tears).
Contact your specialist dealer for possible repairs or part replacements.
Every month
If your wheelchair is stored for a longer period, you still need to charge the batteries every month.
It is also possible to keep the battery charger connected to the battery and the mains during this
period. For more information, see § 3.7.
Yearly or more often
Have your wheelchair inspected and serviced by your specialist dealer, at least once a year, or
more often. The minimum maintenance frequency depends on use and should therefore be
commonly agreed upon with your specialist dealer.
If stored
Make sure that your wheelchair is stored in a dry environment to prevent mould from growing,
or the upholstery from being damaged.
4.2 Instructions for maintenance
4.2.1 Wheels and tyres
Proper working of the brakes depends on the state of the tyres, that can change due to wear
and contamination (water, oil,
mud, …).
Keep your wheels free of wires, hair, sand and fibres.
Check the profile of the tyres. If the tread depth is less than 1 mm, the tyres need to be
replaced. Contact your specialist dealer for this matter.
CAUTION
Verso
2023-06
Maintenance
18
EN
NL
4.2.2 Cleaning
Risk of damage by moisture
Keep the operating console clean and protect it from water and rain.
Never use a hose or high
-
pressure cleaner to clean the wheelchair.
Wipe all rigid parts of the wheelchair with a damp cloth (not drenched). If necessary, use a mild
soap, suitable for varnishes and synthetics.
The upholstery can be cleaned with lukewarm water and a mild soap. Do not use abrasive
cleaning agents to clean.
Keep the ventilation openings of the battery charger clean and free of accumulated dust. Blow
away the dust and clean the battery charger enclosure with a slightly moistened cloth, if required.
4.2.3 Disinfection
Risk of damage
Disinfections may only be undertaken by trained persons. Consult your specialist dealer.
4.3 Troubleshooting
Even if you use your wheelchair properly, a technical problem may occur despite this.
In this case, contact your local specialist dealer.
Risk of injuries and damage to the wheelchair
NEVER attempt to repair your wheelchair yourself.
For failures in the operating console you need to contact your specialist dealer.
He/She
will decide if the console needs to be reprogrammed.
In case of failure, a fault code is displayed on the operating console, see §5.
The following symptoms may indicate a serious problem. Therefore, always contact your
specialist dealer if you spot any of the following deviations:
Strange sound;
Frayed/damaged wiring harnesses;
Cracked or broken connectors;
Uneven tread wear at one of the tyres;
Jerky movements;
Wheelchair deflects to one side;
Damaged or broken wheel assemblies;
Wheelchair does not switch on (blown fuse);
Wheelchair is powered but does not move, see 3.4.
4.4 Expected lifespan
The average lifespan of your wheelchair is 5 years. Depending on the frequency of use, driving
circumstances and maintenance, the lifespan of your wheelchair will increase or decrease.
4.5 Reuse
Before reuse by another person, have the wheelchair disinfected, inspected and serviced
according to the instructions in §4.1 and §4.2.
CAUTION
CAUTION
WARNING
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184
  • Page 185 185
  • Page 186 186
  • Page 187 187
  • Page 188 188
  • Page 189 189
  • Page 190 190
  • Page 191 191
  • Page 192 192

Vermeiren VERSO Instrukcja obsługi

Typ
Instrukcja obsługi