Electrolux EWF1645 Instrukcja obsługi

Kategoria
Pralki
Typ
Instrukcja obsługi
132 991 680
PL
EWF 1045
EWF 1245
EWF 1445
H
GB
SK
CZ
WASHING MACHINE
PRALKA AUTOMATYCZNA
AUTOMATICKÁ PRACKA
AUTOMATICKÁ PRÁCKA
AUTOMATA MOSÓGÉP
132991680 copertina 28-10-2003 8:47 Pagina 1
Washing hints 14
Sorting the laundry 14
Temperatures 14
Before loading the laundry 14
Maximum loads 14
Laundry weights 14
Removing stains 14
Detergents and additives 15
International wash code symbols 16
Operating sequence 17-19
Washing programmes 20-21
Maintenance 22
Door seal 22
Bodywork 22
Detergent dispenser drawer 22
Drain pump 22
Water inlet filter 23
Emergency emptying out 23
Frost precautions 23
Something not working? 24-25
Warnings 3-4
Disposal 4
Tips for environmental protection 4
Technical specifications 4
Installation 5
Unpacking 5
Positioning 5
Water inlet 5
Water drainage 6
Electrical connection 6
Your new washing machine 7
Description of the appliance 7
Detergent dispenser drawer 7
Use 8
Control panel 8
Controls 8-13
Programme information 13
2
Dear customer,
Please read these operating instructions carefully
and pay particular attention to the safety notes
indicated in the first pages. We recommend that you
keep this instruction booklet for future reference and
pass it on to any future owners.
Transport damages
When unpacking the appliance, check that it is not
damaged. If in doubt, do not use it and contact the
Service Centre.
The symbols you will see on some paragraphs of this booklet have the following meaning:
The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is
particularly important for your safety or correct functioning of the appliance.
The information marked with this symbol provides additional instructions and practical tips on the use
of the appliance.
Tips and information about economical and ecological use of the machine are marked with this symbol.
Our contribution to the protection of the
environment: we use environmentally
friendly paper.
Contents
132991680 GB.qxd 28/10/2003 13:49 Pagina 2
ENGLISH
Installation
All internal packing must be removed before using
the appliance. Serious damage may be caused to
the machine or adjacent furniture if the protective
transit devices are not removed or are not
completely removed. Refer to the relevant
paragraph in the instruction book.
Any electrical work required to install this
appliance must be carried out by a qualified
electrician.
Any plumbing work required to install this appliance
must be carried out by a qualified plumber.
After having installed the machine, check that it is
not standing on its electrical supply cable.
If the appliance is placed on a carpeted floor,
ensure that air can circulate freely between the
feet and the floor.
Use
This appliance is designed for domestic use. It
must not be used for purposes other than those
for which it was designed.
Only wash fabrics which are designed to be
machine washed. Follow the instructions on each
garment label.
Do not overload the appliance. Follow the
instructions in the instruction book.
Make sure that all pockets are empty. Objects
such as coins, safety pins, pins and screws can
cause extensive damage.
Do not machine wash garments saturated with
petroleum, methylated spirits, trichlorethylene, etc.
If such fluids have been used to remove stains
prior to washing, wait until they have completely
evaporated from the fabric before placing
garments in the appliance.
Place small items such as socks, belts, etc. in a
cloth bag or pillowcase to prevent them getting
trapped between the drum and the tub.
Use only the recommended quantities of fabric
softener. An excessive amount could damage the
laundry.
Leave the porthole door slightly ajar when the
appliance is not in use. This preserves the door
seal and prevents the formation of musty smells.
Always check that water has emptied out before
opening the door. If not, drain the water following
the instructions in the instruction book.
Always unplug the appliance and shut the water
tap after use.
General safety
Repairs to the machine must be carried out only
by qualified personnel. Repairs carried out by
inexperienced persons could cause serious
danger. Contact your local Service Centre.
Never pull the power supply cable to remove the
plug from the socket; always take hold of the plug
itself.
During high temperature wash programmes the
door glass may get hot. Do not touch it!
Child safety
Children are often not aware of how dangerous
electrical appliances can be. When the machine is
working, children should be carefully supervised
and not be allowed to play with the appliance.
The packaging components (e.g. plastic film,
polystyrene) can be dangerous to children -
danger of suffocation! Keep them out of children’s
reach.
Keep all detergents in a safe place out of
children’s reach.
When the appliance is to be scrapped, cut off the
electrical supply cable and destroy the plug with
the remaining cable. Disable the door catch in
order to prevent children from becoming trapped
inside while playing.
Warnings
3
The following warnings are provided in the interests of overall safety. You must read them carefully before
installing or using the appliance.
132991680 GB.qxd 28/10/2003 13:49 Pagina 3
4
Disposal
Tips for environmental protection
Packaging materials
The materials marked with the symbol are
recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by disposing
of them properly in appropriate collection
containers.
Machine
Use authorised disposal sites for your old appliance.
Help to keep your country tidy!
To save water, energy and to help protect the
environment, we recommend that you follow these
tips:
Normally soiled laundry may be washed without
prewashing in order to save detergent, water and
time (the environment is protected too!).
The machine works more economically if it is fully
loaded.
With adequate pre-treatment, stains and limited
soiling can be removed; the laundry can then be
washed at a lower temperature.
Measure out detergent according to the water
hardness, the degree of soiling and the quantity of
laundry being washed.
EWF 1045 EWF 1245 EWF 1445
DIMENSIONS Height 85 cm 85 cm 85 cm
Width 60 cm 60 cm 60 cm
Depth 59 cm 59 cm 59 cm
MAXIMUM LOAD Cotton 5 kg 5 kg 6 kg
Synthetics 2.5 kg 2.5 kg 3 kg
Delicates 2.5 kg 2.5 kg 3 kg
Woollens 2 kg 2kg 2 kg
Hand wash 2 kg 2 kg 2 kg
Silk 1 kg 1 kg 1 kg
SPIN SPEED 1000 rpm max. 1200 rpm max. 1400 rpm max
POWER SUPPLY VOLTAGE/FREQUENCY 220-230 V/50 Hz 220-230 V/50 Hz 220-230 V/50 Hz
TOTAL POWER ABSORBED 2200 W 2200 W 2200 W
MINIMUM FUSE PROTECTION 10 A 10 A 10 A
WATER PRESSURE Minimum 500 kPa 500 kPa 500 kPa
Maximum 800 kPa 800 kPa 800 kPa
This appliance complies with the following EEC Directives:
73/23/EEC of 19/02/73 relating to low voltage
89/336/EEC of 03/05/89 relating to electromagnetic compatibility.
Technical specifications
132991680 GB.qxd 28/10/2003 13:49 Pagina 4
ENGLISH
Installation
5
Unpacking
All transit bolts and packing must be
removed
before using the appliance.
You are advised to keep all transit devices so that
they can be refitted if the machine ever has to be
transported again.
Using a spanner unscrew and remove the two rear
bottom screws. Slide out the two plastic pins.
Lay the machine gently on its back, making sure
that the hoses are not squashed.
Remove the polystyrene block from the bottom of
the machine and release the two plastic bags.
Very carefully slide out the left polythene bag,
removing it towards the right and then downwards.
Repeat the operation for the right polythene bag,
removing it towards the left and then upwards.
P1127
P1126
P1124
2
3
1
P0001
P1129
Remove the polystyrene base.
Set the machine upright and unscrew the remaining
rear screw. Slide out the relevant pin.
Fill all the holes with the plastic plugs supplied with
the instruction booklet.
Positioning
Install the machine on a flat hard floor.
Make sure that air circulation around the machine is
not impeded by carpets, rugs etc. Check that the
machine does not touch the wall or other kitchen
units.
Carefully level by screwing the adjustable feet in or
out. Never place cardboard, wood or similar
materials under the machine to compensate for any
unevenness in the floor.
Water inlet
Connect the water inlet hose to a tap with a 3/4"
thread.
The other end of the inlet hose which connects to
the machine can be turned in any direction. Simply
loosen the fitting, rotate the hose and retighten the
fitting, making sure there are no water leaks
P0021
P1088
P1051
P0002
P1128
132991680 GB.qxd 28/10/2003 13:49 Pagina 5
6
The inlet hose must not be lengthened. If it is too
short and you do not wish to move the tap, you will
have to purchase a new, longer hose specially
designed for this type of use.
Water drainage
The end of the drain hose can be positioned in three
ways:
Hooked over the edge of a sink using the plastic
hose guide supplied with the machine. In this
case, make sure the end cannot come unhooked
when the machine is emptying.
This could be done by tying it to the tap with a piece
of string or attaching it to the wall.
In a sink drain pipe branch. This branch must be
above the trap so that the bend is at least 60 cm
above the ground.
Directly into a drain pipe at a height of not less
than 60 cm and not more than 90 cm.
The end of the drain hose must always be
ventilated, i.e. the inside diameter of the drain pipe
must be larger than the outside diameter of the drain
hose.
The drain hose must not be kinked. Run it along the
floor; only the part near the drainage point must be
raised.
P0023
P0022
Electrical connection
This machine is designed to operate on a 220-230
V, single-phase, 50 Hz supply.
Check that your domestic electrical installation can
take the maximum load required (2.2 kW), also
taking into account any other appliances in use.
Connect the machine to an earthed socket.
The manufacturer declines any responsibility
for damage or injury through failure to comply
with the above safety precaution.
Should the appliance power supply cable
need to be replaced, this should be carried
out by our Service Centre.
The power supply cable must be easily
accessible after installing the machine.
132991680 GB.qxd 28/10/2003 13:49 Pagina 6
ENGLISH
7
Your new washing machine
This new washing machine, which is fitted with the Jet system, patented Electrolux, meets all modern needs
for effective treatment of laundry with low water, energy and detergent consumption.
Further savings are achieved by washing small loads of laundry, since water and electricity consumption is
proportional to the quantity and type of laundry being washed.
The programme progress display shows the programme steps selected and the programme phase which
is running.
The special wool programme with its new delicate wash system treats your woollens with extreme care.
Automatic cooling of the wash water to 60°C before draining, with the 95°C programme. This reduces
thermal shock to fabrics, helping to prevent creasing.
The balance control device ensures the machine is stable during the spin.
The programme selector dial combines the possibility of selecting between different fabrics, special cycles
and memories, making it easier to set the programmes.
1 Detergent dispenser drawer
2 Control panel
3 Door handle
4 Drain pump
5 Adjustable feet
Detergent dispenser drawer
Prewash
Main wash
Fabric softener, starch
Description of the appliance
5
2
1
4
3
FUNCTION
PROGRAM
M
1
M
2
M
3
E
Change
Options
Exit
START/PAUSE
EWF 1445
Temp. Spin
P1190
132991680 GB.qxd 03/11/2003 16:11 Pagina 7
8
Use
Control panel
only a few control elements (1 programme selector
dial and 6 buttons). This simple control method is
made easy thanks to the interactive display.
Interactive means that the washing machine display
changes to reflect each step you have entered. This
ensures that only those settings that make sense are
made. You are able to see the current settings at any
time in the information panel and in the option row.
1. Information panel shows the current settings
2. Real time clock
3. End cycle time
4. Selection shows temperature, spin speed,
options and extras.
4 Temperature button “Temp.”
Press this button repeatedly to increase or decrease
the temperature, if you want your laundry to be
washed at a temperature different from the one
proposed by the washing machine.
Maximum temperatures are 95°C for cotton, 60°C
for synthetic fabrics, 40°C for delicate fabrics, wool
and fabrics to be hand-washed, 30°C for silk and
«Miniprogramme», while «0» corresponds to cold
wash.
By depressing Temperature “Temp.” button, the
relevant message will appear on the second row of
the display (instead of «cycle end at»). In the corner
of the third row appears the indication of the
selected temperature.
Change
Options
Exit
Cotton
Cycle and at
08.30
10.55
95°C 1400
1 23
4
Temp. Spin
1 Programme chart
A programme chart in English is in the interior part
of the detergent dispenser drawer.
A programme chart in other languages is provided
with the instruction booklet.
2 Programme selector dial
The selector dial is divided into 4 sections:
Cotton, synthetics and delicates (blue section)
Handwash, wool, silk and mini-programme
(green section)
Rinses, drain, spin and delicate spin (grey
section)
Memory 1, memory 2, memory 3 (green section)
The selector dial can be turned either clockwise or
anticlockwise.
Position E corresponds to the ENERGY SAVING
programme for cotton and position O to Reset
programme/Switching OFF of the machine.
At the end of the programme the selector dial must
be turned to position O, to switch the machine OFF.
Attention!
If you turn the programme selector dial to another
programme when the machine is working, a
warning message appears for 4 seconds on the
display while the buzzer sounds for 3 times .
3 Display
The DISPLAY is used for setting a large number of
functions and combine them with each other using
M
1
M
2
M
3
E
PROGRAM
M
1
M
2
M
3
E
Change
Options
Exit
START/PAUSE
1234567
EWF 1445
TIMELINE
Temp. Spin
FUNCTION
132991680 GB.qxd 28/10/2003 13:49 Pagina 8
ENGLISH
5 Spin Speed button “Spin”
Press this button repeatedly to change the spin
speed, if you want your laundry to be spun at a
speed different from the one proposed by the
washing machine.
Maximum speeds are:
for cotton: 1000 rpm for model EWF 1045;
1200 rpm for model EWF 1245;
1400 rpm for model EWF 1445;
for synthetic, wool, and fabrics to be handwashed:
0900 rpm;
for delicate, silk fabrics, miniprogramme:
0700 rpm;
Change
Options
Exit
COTTON
MAX 1400
08.30
10.55
1400
Temp. Spin
Change
Options
Exit
COTTON
MAX 95°C
08.30
10.55
60°C
Temp. Spin
By depressing the Spin speed button you can also
choose No Spin option «0», Rinse Hold option
and Night cycle option .
No spin «0» option eliminates all the spin phases
and increases the rinses number for cottons and
synthetics.
Rinse hold position : when you choose this
option, the machine will not drain the water of the
last rinse, so as not to wrinkle the laundry.
Night cycle position : when you choose this
option, the machine will not drain the water of the
last rinse, so as not to wrinkle the laundry.
As all spinning phases are suppressed, this washing
cycle is very noiseless and it can be selectionned at
night or in times with a more economical power rate.
On cotton and synthetic programmes the rinses will
be performed with more water.
To complete the cycle, choose one of the following
programmes:
Drain
To drain the water select Drain programme by
means of the selector dial, then press the START
button.
Spin
To spin the laundry choose spin or delicate spin
programme by means of the
selector dial; select spin speed by means of button
“Spin” and then press the START/PAUSE button.
Important!
Before choosing the programme (Drain),
(Spin) or (Delicate Spin) the selector dial has to
be positioned on «O» (OFF).
6 «Options», «Change» and «Exit»
buttons
Options button allows you to move through the
option icons.
Change
Options
Exit
Extra Rinse
No 10.55
Temp. Spin
9
132991680 GB.qxd 28/10/2003 13:49 Pagina 9
Change button allows you to select/change the
status of the different icons.
Exit button allows you to return to the previous
selection.
Depending on the program, different functions can be
combined. These must be selected after choosing the
desired program and before depressing the
START/PAUSE button.
By depressing the "Options" button, all the symbol
icons, allowed for the selected programme will
appear in the display (allowed for the selected
programme).
The first option will start flashing. Its name and
status will appear in the display.
If you want to change the option status, press
"Change" button. There will appear a line below the
selected icon, indicating that the option is set.
To select the other options press again the «Options»
button and proceed as before.
Once you have completed the selection of the
options, pressing the «Exit» button, the selected
icons will remain fixed in the display.
Note: To modify the already chosen option
selections, repeat the previous procedure.
Important! While selecting the option, if you press
the temperature “Temp.”, “Spin” , or Start/Pause
button, the relative function will be executed.
EXTRA RINSE: this option can be selected with
all programmes, except the wool/handwash
programs and miniprogramme.The machine will add
2 rinses for cottons and 1 rinse for synthetics,
delicates and silk.
This option is recommended for people who are
allergic to detergents, and in areas where the water is
very soft.
Change
Options
Exit
COTTON
CYCLE END AT
08.30
10.55
60°C 1400
Temp. Spin
Change
Options
Exit
Extra Rinse
Yes 10.55
Temp. Spin
TIME SAVING: this option can be used for lightly
soiled cotton, synthetic or delicates items in order to
obtain a good washing program in a short time. The
washing time will be reduced according to the type of
fabric and the selected temperature. Selecting this
option «Short» or «Very Short» will be shown in the
display.
DELAY START: this option makes it possible to
delay the starting of the washing program by 30 min -
60 min - 90 min, 2 hours and then by 1 hour till 20
hours. The delay you have selected is indicated in the
display.
You must select this option after you have set the
program and before you press the START/PAUSE
button.
You can cancel the delay time at any moment, before
you press the START/PAUSE button. If you have
already pressed the START/PAUSE button and you
wish to cancel the Delay time proceed as follows:
1. set the washing machine to PAUSE by pressing
the START/PAUSE button;
2. deselect the Delay start option, changing the
status;
3. press the START/PAUSE button to start the
program.
Important!
The selected delay can be changed only after
selecting the washing program again.
The door will locked throughout the delay time.
If you need to open the door, you must first set the
washing machine to PAUSE by pressing the
START/PAUSE button. After you have closed the
door, press the START/PAUSE button again.
The Delay Start cannot be selected with SPIN and
DRAIN programmes.
PREWASH: select this option if you wish your
laundry to be prewashed before the main wash (not
available for wool and handwash cycle, miniprogram
and silk).
The Prewash ends with a short spin at 650 rpm in
programmes for cotton and synthetic fabrics,
whereas in the program for delicate fabrics the water
is only drained.
Change
Options
Exit
Delay Start
Start in 30 min 11.25
Temp. Spin
Change
Options
Exit
Delay Start
No 10.55
Temp. Spin
10
132991680 GB.qxd 28/10/2003 13:49 Pagina 10
ENGLISH
INTENSIVE: for heavy soiled laundry.
This option can be selected only for cottons and
synthetics.
The washing time will be prolonged according to the
cycle temperature and the fabric type.
EASY IRON: selecting this button the laundry is
gently washed and spun to avoid any creasing. In
this way ironing is easier. Furthermore the machine
will perform 6 rinses instead of 3 for cotton and 4
rinses instead of 3 for synthetics. This function can
be used for cotton and synthetic fabrics. If this
option is selected for cotton programmes, the spin
speed automaticaly will reduce to 1000 rpm.
ECONOMY: this option can be selected only for
synthetics lightly or normally soiled with a
temperature of 40°C or higher. The washing time will
be prolonged. If you select 60°C-50°C-40°C, the
washing temperature will be reduced to 42°C.
MENU:
Menu option is used for selecting various basic
settings without affecting the particular wash
programme. These basic settings will remain active
until they are deselected/modified.
To move through the different Menu settings use the
«Options» button.
To change/confirm the selected setting use the
«Change» button.
MEMORY
Programme settings that are frequently used can be
saved (e.g. cotton, 95°C, 1200 rpm, with time saving).
There are 3 memory spaces available for this
purpose. The saved programme can be selected in
the same way as any other wash programme by
means of the selector dial.
Example: Cotton , 95°C, 1200 rpm, with Time saving.
1. Select the cycle and programme settings.
Change
Options
Exit
Cotton
Cycle end at
08.30
10.55
60°C 1400
Temp. Spin
2. Enter the Menu option and select one of the
memory positions. A «Store programme?»
message will appear in the display.
3. To memorise the selected programme press the
«Change» button. «Stored» message will appear
in the display.
To change the memorized programme setting repeat
the procedure from the beginning.
SOUND
The sound setting permits you to modify the volume
of the sound emitter. You can choose between
different levels: low, no sound and normal.
Example:
1. Enter the Menu option and select the sound
setting.
2. Use the «Change» button to select the desired
level.
Change
Options
Exit
Sound
Low or No Sound
Temp. Spin
Change
Options
Exit
Sound
Normal
Temp. Spin
Change
Options
Exit
Programme Stored
Temp. Spin
Change
Options
Exit
Memory 1
Store programme?
B
B
Temp. Spin
Change
Options
Exit
Setup
A
A
Temp. Spin
11
132991680 GB.qxd 28/10/2003 13:49 Pagina 11
RINSE +
The washing machine is set such that its water
consumption is extremely economical. For people
with allergies and in areas where the water is very
soft, it can however be helpful to use more water
when rinsing. When you select RINSE +, 2 additional
rinses will be carried out for cottons and 1 additional
rinse for synthetics, delicates and silk items. If RINSE
+ has been selected, will appear in the option
row.
LANGUAGE
You can change the language setting if you would like
the indicators in the display to appear in a different
language.
Example:
1. Enter the Menu option and select the Language
setting.
2. Press the «Change» button to select the desired
Language.
CLOCK
The clock setting permits you to modify/set up the
current time. It is important to keep it updated as the
current END Cycle Time depends on it.
Change
Options
Exit
Einstellungen
B
Temp. Spin
Change
Options
Exit
Sprache
DEUTCH
A
Temp. Spin
Change
Options
Exit
Language
ENGLISH
Temp. Spin
Change
Options
Exit
Extra Rinse
Yes 10.55
Temp. Spin
Change
Options
Exit
Extra Rinse
No 10.55
Temp. Spin
Example:
1. Enter the Menu option and select the Clock
setting.
2. With a short/single time pressure of the
«Change» button, the time varies minute by
minute. With a continue pressure of the
«Change» button, the time varies 10 minutes by
10 minutes.
CONTRAST
The Contrast setting allows you to modify the
optical characteristic of the display.
Example:
1. Enter the Menu option and select the Contrast
setting.
2. Use the «Change» button to set up the desired
contrast level.
BRIGHTNESS
The Brightness setting allows you to modify the
backlight intensity of the display.
Example:
1. Enter the Menu option and select the
Brightness setting.
2. Use the "Change"button to set up the desired
brightness level.
Note:
At the end of the programme if no button is pressed
for approximately 10 minutes the backlight intensity
goes off.
Change
Options
Exit
Brightness
B
Temp. Spin
Change
Options
Exit
Brightness
A
Temp. Spin
Change
Options
Exit
Contrast
B
Temp. Spin
Change
Options
Exit
Contrast
A
Temp. Spin
Change
Options
Exit
Clock
Set Time
14.46
B
B
Temp. Spin
Change
Options
Exit
Clock
Set Time
14.45
A
A
Temp. Spin
12
132991680 GB.qxd 28/10/2003 13:49 Pagina 12
ENGLISH
7 START/PAUSE button
This button has 2 functions:
Start: after you have selected the desired
programme and options, press this button to
start the washing machine. The light close to the
button will stop flashing and remain lit.
If you have selected a delay time option, the
countdown will begin and will be shown on the
display.
Pause: when you press this button again, the
programme in progress is interrupted. The light
close to the button will start flashing. To restart
the programme, press the button again.
When you PAUSE the cycle, it becomes possible to
open the door if:
The washing machine is not in the heating
phase;
The level of the water is not high;
The drum is not turning.
Important! You must set the washing machine to
PAUSE before you make any change in the
programme in progress.
Programme information
Washing programme for machine washable wool as
well as for hand washable woollens and delicate
fabrics with the “hand washing” care symbol.
With this programme it is possible to rinse and spin
garments which have been washed by hand.
The machine performs 3 rinses, followed by a final
spin at maximum speed.
The spin speed can be reduced by depressing
button
Spin
. The final spin is foreseen only for
cotton items as in the spin programme.
Rinses
Wool
START/PAUSE
13
For emptying out the water of the last rinse in
programmes with the Rinse hold or Night cycle
option .
Turn first the programme selector dial to O, then select
programme and depress the START/PAUSE button.
Separate spin at max.700 rpm for hand washed
garments. It has to be used for cotton items. You can
reduce the speed by means of button Spin to adapt
it to the fabrics to be spun.
Separate spin at the maximum speed for hand
washed garments. It has to be used for synthetic,
delicate, wool/handwashed, silk items. You can
reduce the speed by means of button Spin to adapt
it to the fabrics to be spun.
This is a complete programme that can be
combined with the following options: spin speed
reduction, no spin, rinse hold or night cycle, delayed
start.
To be used for laundry which is lightly soiled or
which needs freshening up.
Max load 3 kg (EWF 1445);
2.5 kg (EWF 1045, EWF 1245).
Washing temperature 30°C
Programme duration 30 minutes
Final spin speed 700 r.p.m.
To reset a programme and to switch off the machine
turn the selector dial to O. Now can a new
programme be selected.
O = Cancelling/OFF
Mini programme
Delicate Spin
Spin
Drain
132991680 GB.qxd 28/10/2003 13:49 Pagina 13
14
Washing hints
Sorting the laundry
Follow the wash code symbols on each garment
label and the manufacturer’s washing instructions.
Sort the laundry as follows:
whites, coloureds, synthetics, delicates, woollens.
Temperatures
95°
for normally soiled white cottons and linen
(e.g. tea cloths, towels, tablecloths,
sheets...)
50°-60° for normally soiled, colour fast garments
(e.g. shirts, night dresses, pyjamas....) in
linen, cotton or synthetic fibres and for
lightly soiled white cotton (e.g.
underwear).
O (cold) for delicate items (e.g. net curtains), mixed
30°-40° laundry including synthetic fibres and
woollens.
Before loading the laundry
Never wash whites and coloureds together. Whites
may lose their “whiteness” in the wash.
New coloured items may run in the first wash; they
should therefore be washed separately the first time.
Make sure that no metal objects are left in the
laundry (e.g. hair clips, safety pins, pins).
Button up pillowcases, close zip fasteners, hooks
and poppers. Tie any belts or long tapes.
Remove persistent stains before washing. Rub
particularly soiled areas with a special detergent or
detergent paste.
Treat curtains with special care. Remove hooks or
tie them up in a bag or net.
Maximum loads
Recommended loads are indicated in the
programme charts.
General rules:
Cotton, linen: drum full but not too tightly packed;
Synthetics: drum no more than half full;
Delicate fabrics and woollens: drum no more than
one third full.
Washing a maximum load makes the most efficient
use of water and energy.
For heavily soiled laundry, reduce the load size.
Laundry weights
The following weights are indicative:
bathrobe 1200 g
napkin 100 g
quilt cover 700 g
sheet 500 g
pillow case 200 g
tablecloth 250 g
towelling towel 200 g
tea cloth 100 g
night dress 200 g
ladies’ briefs 100 g
man’s work shirt 600 g
man’s shirt 200 g
man’s pyjamas 500 g
blouse 100 g
men’s underpants 100 g
Removing stains
Stubborn stains may not be removed by just water
and detergent. It is therefore advisable to treat them
prior to washing.
Blood: treat fresh stains with cold water. For dried
stains, soak overnight in water with a special
detergent then rub in the soap and water.
Oil based paint: moisten with benzine stain
remover, lay the garment on a soft cloth and dab the
stain; treat several times.
Dried grease stains: moisten with turpentine, lay
the garment on a soft surface and dab the stain with
the fingertips and a cotton cloth.
Rust: oxalic acid dissolved in hot water or a rust
removing product used cold. Be careful with rust
stains which are not recent since the cellulose
structure will already have been damaged and the
fabric tends to hole.
Mould stains: treat with bleach, rinse well (whites
and fast coloureds only).
Grass: soap lightly and treat with bleach (whites and
fast coloureds only).
Ball point pen and glue: moisten with acetone (*),
lay the garment on a soft cloth and dab the stain.
Lipstick: moisten with acetone as above, then treat
stains with methylated spirits. Remove any residual
marks from white fabrics with bleach.
Red wine: soak in water and detergent, rinse and
treat with acetic or citric acid, then rinse. Treat any
residual marks with bleach.
132991680 GB.qxd 28/10/2003 13:49 Pagina 14
ENGLISH
Quantity of detergent to be used
The type and quantity of detergent will depend on
the type of fabric, load size, degree of soiling and
hardness of the water used.
Water hardness is classified in so-called “degrees”
of hardness. Information on hardness of the water in
your area can be obtained from the relevant water
supply company, or from your local authority.
Follow the product manufacturers’ instructions on
quantities to use.
Use less detergent if:
you are washing a small load,
the laundry is lightly soiled,
large amounts of foam form during washing.
Ink: depending on the type of ink, moisten the fabric
first with acetone (*), then with acetic acid; treat any
residual marks on white fabrics with bleach and then
rinse thoroughly.
Tar stains: first treat with stain remover, methylated
spirits or benzine, then rub with detergent paste.
(*) do not use acetone on artificial silk.
Detergents and additives
Good washing results also depend on the choice of
detergent and use of the correct quantities to avoid
waste and protect the environment. Although
biodegradable, detergents contain substances
which, in large quantities, can upset the delicate
balance of nature.
The choice of detergent will depend on the type of
fabric (delicates, woollens, cottons, etc.), the colour,
washing temperature and degree of soiling.
All commonly available washing machine detergents
may be used in this appliance:
powder detergents for all types of fabric,
powder detergents for delicate fabrics (60°C max)
and woollens,
liquid detergents, preferably for low temperature
wash programmes (60°C max) for all types of
fabric, or special for woollens only.
The detergent and any additives must be placed in
the appropriate compartments of the dispenser
drawer before starting the wash programme.
If using concentrated powder or liquid detergents, a
programme without prewash must be selected.
The washing machine incorporates a recirculation
system which allows an optimal use of the
concentrated detergent.
Pour liquid detergent into the dispenser drawer
compartment marked just before starting the
programme.
Any fabric softener or starching additives must be
poured into the compartment marked before
starting the wash programme.
Follow the product manufacturer’s
recommendations on quantities to use and do not
exceed the «MAX» mark in the detergent
dispenser drawer.
15
132991680 GB.qxd 28/10/2003 13:49 Pagina 15
International wash code symbols
These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.
Energetic wash
Delicate wash
Max. wash
temperature
95°C
Max. wash
temperature
60°C
Max. wash
temperature
40°C
Max. wash
temperature
30°C
Hand wash Do not
wash
at all
Bleaching Bleach in cold water Do not bleach
Ironing Hot iron
max 200°C
Warm iron
max 150°C
Lukewarm iron
max 110°C
Do not iron
Dry cleaning Dry cleaning
in all solvents
Dry cleaning in
perchlorethylene,
petrol, pure alcohol,
R 111 & R 113
Dry cleaning
in petrol,
pure alcohol
and R 113
Do not
dry clean
Drying Flat On the line On clothes
hanger
Tumble dry
high
temperature
low
temperature
Do not
tumble dry
95
60
60
40
30
30
16
132991680 GB.qxd 28/10/2003 13:50 Pagina 16
ENGLISH
17
4. Switch the machine ON and OFF
Turn the selector dial to the desired programme to
switch the appliance on.
To switch the appliance off turn it to «O».
Switching the appliance for the first time.
LANGUAGE
When switching on the appliance for the first time
you must set the language in which you want the
indicators in the display to appear.
Important!
If the display is not showing any language, the
appliance has already been switched on once. In
such case, go to the chapter «Change language» if
you would like to change the language setting.
Example:
1.Press the «Change» button until the desired
language appears in the display.
2.Press the EXIT button to confirm the selection.
All indicators in the display will appear in this
language from now on.
When the appliance is switched on again all
indicators in the display will appear in this language.
Note:
If the undesired language has been set, press
contemporary SPIN + OPTIONS buttons for about 2
seconds in order to change the language.
Follow the instructions as before.
Change
Options
Exit
Einstellungen
B
Temp. Spin
Change
Options
Exit
Sprache
DEUTCH
A
Temp. Spin
Change
Options
Exit
Language
ENGLISH
Temp. Spin
M
1
M
2
M
3
E
Operating sequence
Before washing your first load of laundry, we
recommend that you run a cotton cycle at 60°C,
with the machine empty, in order to remove any
manufacturing residue from the drum and tub.
Pour half a measure of detergent into the main wash
compartment and start up the machine.
1. Place the laundry in the drum
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
2. Measure out the detergent
Pull out the dispenser drawer until it stops. Measure
out the amount of detergent recommended by the
manufacturer in a graduated cup and pour it into the
main wash compartment .
If you have selected the prewash function, pour
detergent into the appropriate compartment marked
.
3. Measure out the additive
If required, pour fabric softener into the compartment
marked , without exceeding the «MAX» mark.
P1195
P1194
P0004
132991680 GB.qxd 28/10/2003 13:50 Pagina 17
18
7. Select the Spin Speed “Spin”, the
Rinse Hold or Night cycle .
Press the SPIN SPEED button repeatedly, in
order to select the desired spin speed or No Spin
«O» or the Rinse Hold or the Night Cycle
options. The relevant message will appear on the
second row of the display. The selected spin level
will be shown on the third row next to the spin
button.
If you select the Rinse Hold or Night Cycle options,
the machine will stop at the end of the programme
with the water still in the tub.
8. Select the desired options
Depress the relevant buttons to select the required
options.
Depending on the selected programme only
certain options are available and shown during
the selection phase.
Note: Not all the options are compatible between
themselves. The uncompatible option icons will
disappear.
9. Select the DELAY TIME
Before you start the programme, if you wish the
starting to be delayed, choose the DELAY option.
The selected delay time value (up to 20 hours) will
appear on the display while selecting.
The end cycle will be updated and shown on the
relative position of the display.
Change
Options
Exit
Delay Start
Start in 30 min 11.25
Temp. Spin
Change
Options
Exit
Delay Start
No 10.55
Temp. Spin
Change
Options
Exit
COTTON
MAX 1400
08.30
10.55
1200
40°C
Temp. Spin
SETTING THE TIME
You should set the time prior to the first wash and
when changing to and from daylight savings time.
See «Clock setting», Menu.
5. Select the desired programme/fabric
Turn the selector dial, in order to select the desired
programme/fabric. The relevant message will appear
in the display.
The display will show the END CYCLE TIME of the
selected programme, calculated on the basis of the
maximum load for each type of fabric. The
START/PAUSE button light will start flashing.
If the load of laundry to be washed is small, at the
beginning of the cycle the display will still indicate
the END CYCLE relevant to the maximum load. The
duration value will be gradually adjusted during the
execution of the cycle.
6. Select the temperature
Press the TEMPERATURE button if you wish to
select a temperature value different from the one
proposed by the washing machine.
The message of the maximum available temperature
appears on the second row of the display (instead of
«cycle end at»). In the corner of the third row
appears the indication of the selected temperature.
Change
Options
Exit
COTTON
MAX 95°C
08.30
10.55
40°C 1400
Temp. Spin
Change
Options
Exit
Cotton
Cycle and at
08.30
10.55
60°C 1400
Temp. Spin
M
1
M
2
M
3
E
132991680 GB.qxd 28/10/2003 13:50 Pagina 18
ENGLISH
10. Start the programme
Press the START/PAUSE button. The relevant light
will stop flashing. The message relevant to the
phase that is in progress will be shown in the
display.
If you have chosen a delayed start, the washing
machine will begin the countdown.
11. How to change a programme during
its cycle
Before you make any change, you must pause the
washing machine by pressing the START/PAUSE
button.
It is possible to change any phase before the
programme carries it out.
When the programme has started, you can only
reset it by turning the programme selector dial to
«and then you can select the new programme.
The washing water remains in the tub.Start the new
programme by depressing the START/PAUSE
button.
Note: To drain the water before starting the new
cycle you have to cancel the programme and select
the DRAIN cycle.
12. Cancelling a programme
Turn the selector dial to «O» to cancel a programme
which is running. Now you can select a new
programme.
13. How to open the door during the
cycle of a programme
You can open the door, after having set the washing
machine to PAUSE, provided the following
conditions exist:
the washing machine is not in the heating phase
beyond 55°C;
the level of the water is not high;
the drum is not turning.
Change
Options
Exit
COTTON
Washing
08.30
12.00
40°C 1200
Temp. Spin
START/PAUSE
If these requirements are met, when you pause the
washing machine, the relevant message appears in
the display and the door can be opened.
Should it not be possible to open the door, and
should it be absolutely necessary to do so, switch
the machine off by turning the selector dial on "O"
position.
After approximately 3 minutes, you can open the
door.
Pay attention to the level and temperature of the
water in the washing machine!
14. End of programme
At the end of the programme, the washing machine
stops automatically, gives an audible signal (if
option no sound has not been selected), and
displays the relevant message.
If you had selected the RINSE HOLD or NIGHT
CYCLE option, the START/PAUSE button light is off.
To drain or spin first turn the programme selector
dial to «O» and then to drain programme or
spin/delicate spin programme / .
Release of the lock is also indicated by the coming
on of the message "Door openable" (cycle ended).
Turn the programme selector dial to «O» to switch
the machine off.
Remove the laundry from the washing machine.
Check whether the drum is completely empty, by
rotating it with your hand. The purpose of this is to
prevent any items of laundry from remaining
accidentally in the drum, where they might get
damaged in a subsequent wash (e.g. by shrinking)
or bleed colour into another load of laundry.
We advise you to close the water supply tap and
disconnect the plug from the socket.
Leave the door ajar in order to air the washing
machine.
19
132991680 GB.qxd 28/10/2003 13:50 Pagina 19
20
Washing programmes
* The consumption data shown on this chart is to be considered purely indicative, as it may vary depending
on the quantity and type of laundry, on the inlet water temperature and on the ambient temperature. It
refers to the highest temperature for each wash programme.
** In compliance with EC directive 92/75 the consumption figures indicated on the Energy label refer to this
programme at E60°C.
The wool wash cycle of this machine has been approved by Woolmark for the washing of machine washable
Woolmark products provided that the garments are washed according to the instructions on the garment label
and those issued by the manufacturer of this machine. Licence No. M9605.
Type of laundry
and symbols on
labels
1.9
47 2.20
0.85 44 2.04
1.02 49 2.04
0.85
50
1.27
1.05
55
1.27
0.6
57 58
0.55
53 58
0.35 52
57
0.4 55
57
0.3
52
39
0.4
55
57
0.35
52
57
White and
coloureds cotton:
e.g. sheets,
tablecloths,
household linen
White and
coloured cotton
Economy**: e.g.
shirts, blouses,
underwear, towels,
house-hold linen
Synthetic fabrics:
e.g. shirts, blouses,
underwear
Delicate fabrics:
e.g. acrylic fabrics,
viscose, polyester,
synthetic blends
Wool
Handwash
6 kg
EWF1445
6 kg
3 kg
Max
load
Programme/
temperature
Available options
Consumption*
Energy
kWh
Water
litres
Time
h/min.
Cottons
O(cold)-95°C
Cottons E
60°-50°-40°C
Synthetics
O(cold)-60°C
Delicates
O(cold)-40°C
Wool
O(cold)-40°C
Hand wash
O(cold)-40°C
Description of
programme
Main wash at
O(cold)-95°C
3 rinses
Long spin
Main wash at
60°-50°-40°C
2 rinses
Long spin
Main wash at
O(cold)-60°C
3 rinses
Short spin
Main wash at
O(cold)-40°C
3 rinses
Short spin
Main wash at
O(cold)-40°C
3 rinses
Short spin
Main wash at
O(cold)-40°C
3 rinses
Short spin
0.3 50
39
Silk
Silk
30°C
Main wash at
30°C
3 rinses
Short spin
0.3 40 30
0.35
45
30
Miniprogramme
30°C
Main wash at
30°C
3 rinses
Short spin
Washing Programmes
5 kg
EWF1045
EWF1245
5 kg
2.5 kg2.5 kg2.5 kg
3 kg
2.5 kg
EWF1045-EWF1245
2.05
52 2.20
EWF1445
2 kg
2 kg
2 kg
2 kg
1 kg
1 kg
3 kg
2.5 kg
132991680 GB.qxd 28/10/2003 13:50 Pagina 20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128

Electrolux EWF1645 Instrukcja obsługi

Kategoria
Pralki
Typ
Instrukcja obsługi