iGET CS1 instrukcja

1

CS1 / CS6 / CS9

QUICK GUIDE - EN

2

Camera CS1 Mini consult the checklist below for all

components:

Camera Power adapter

USB Cable Manual

Adhesive tape

3

Camera CS6 Consult the checklist below for all

components:

Camera Power adapter

Screw package Manual

Screwdriver

4

Camera CS9 Battery Consult the checklist below for

all components:

Camera Power adapter USB cable

Screw package Bracket (A) Bracket (B)

User manual

5

Power

DC 5V±10%

Status light

Blinking red light: wait for network

connection

Solid blue light on: camera is working

correctly

Solid red light on: camera is

malfunctional

Microphone

Capture sound for your video

SD card slot

Support local microSD card storage

(Max. 128GB)

Reset

Press and hold for 5 seconds with pin

to reset the camera (if you have

modified settings, they will return to

factory defaults

6

Power

DC 12V±10%

Status light

Solid red light on:

The camera is turning on or

malfunctional

Blinking red light:

awaiting Wi-Fi connection

Solid blue light: the camera runs

correctly

Blinking blue light: currently connecting

Microphone

Capture sound for your video

SD card slot

Support local microSD card storage

(Max. 128GB)

Reset

Press and hold for 5 seconds to reset

the camera (if you have modified

settings, they will return to factory

defaults

7

Power

DC 5V±10%

Power on/off

Press the button for 3 seconds to turn

on/off the camera

Status lights

Solid red light on: the camera is turning

on or malfunctional

Blinking red light on: awaiting Wi-Fi

connection (slowly blinking) connecting

the WiFi (quickly blinking)

Blinking blue light: currently connecting

Solid blue light on: the camera runs

correctly

SD card slot

Support local microSD card storage

(Max.128GB)

Reset

Press and hold for 5 seconds to reset

camera

Charging

indicator

- Solid red indicator on: battery is

charging

- Solid blue indicator on: charging

completed

Battery

capacity

9600mAh (two 21700 lithium-ion

batteries)

8

(*) After adjusting your camera angle,

please lock this screw

1) Fix the camera to the wall with screws.

2) Adjust camera angle to a correct view

(as shown in the picture).

9

Download

iGET HOME is available for both iOS and Android

OS. Search the name “iGET HOME”, in App Store or

Google Play, or scan the QR-Code to download the

App.

Google Play IOS Store

Set up router

The router supports the 2.4GHz Wi-Fi (doesn´t

support the 5GHz), and is connected to the Wi-Fi

network. Please set the parameters of the router

before connecting the WiFi network, and record the

SSID and password of your Wi-Fi.

Registration process

10

1) Open the iGET HOME, click “Register”, read the

“Privacy Policy” and click “Agree”.

2) Input a legal and valid Mobile number or Email

address and click “Continue”. Input Verification Code,

then log in the app.

Register Verification Code

11

3) Open the iGET HOME APP click "Armed" >> ”Add

Device” or by clicking on "Device" >> "Add Device".

4) Click "Add Device" or "+", and then select

"Camera" >> choose your model to add camera.

12

5) Power on and reset camera until the status

indicator is flashing quickly or a prompt tone is heard,

and then click "Next". Then input your Wi-Fi's

passwords and click "Next".

Click " " to change network.

Note:

- Camera only supports 2.4GHz Wi-Fi network.

- The number of bits in the SSID and passwords of

the router should not exceed 24 digits.

13

6) In this interface, you should scan the QR code in

your phone with the camera, when the camera comes

out "dong dong". And you can complete the

configuration about 30s.

14

7) When connecting, you should make sure your

router, mobile, and camera are as close as possible.

When camera added successfully, click " "

you could also change the camera's name.

15

In "Security Camera" interface, click " ", you can

set the camera common functions.

16

FAQ – Frequently Asked Questions

Q: The device cannot be previewed properly?

A: Check whether the network is normal, you can

place the camera close to the router, and if not, it is

recommended to reset the device and add it again.

Q: Why is it still in the list of devices after reseting?

A: The reset device only resets the network

configuration of the camera, but cannot change the

configuration on the App, remove the camera, and

must be deleted by the App.

Q: How to cut the camera network to another router?

A: First remove and reset the device on the App and

then configure the device again by the App.

Q: Why doesn't the device identify the SD card?

A: It is recommended to plug in SD card after power

cut. Confirm whether the SD card is normally

available and the format is FAT32. And the TF card

can’t be identified when the Internet environment is

not good.

Q: Why I can’t get the notifications with my cell phone

App?

A: Please confirm that the App has been running on

the phone, and the relevant reminder function has

been opened; Message notification and authority

confirmation in the mobile phone system have been

opened.

17

Cameras CS1 and CS6:

Video flip

Flip your video stream up or down for maximum

flexibility.

Motion detection

Support smart motion detection. The camera will

detect movements, and then send you push

notifications and app alerts.

Record

Support 24H continuous recording with high capacity

SD storage or Cloud storage.

Day & Night

Never miss a moment, even in complete darkness,

with powerful night-vision technology.

Daytime Night

18

Camera CS9:

Remote wake-up

The camera will be in a sleep mode to save power;

you can have a preview in App.

Full-duplex audio

You can see and hear the vistor in your App from the

camera.

PIR

When the camera detects someone stopping by, it

sends an alarm message to your cell phone.

Low battery alarm

When the battery power is lower than your set, the

App will send a notification to your mobile phone.

Record

Using SD card or opening the Cloud-Storage Service,

to keep recording for every moment.

Day & Night

Powerful night vision means no interruptions, even in

complete darkness

19

VI. Warranty Rules

For household use: The given symbol (crossed-out

wheeled bin) on the product or at accompanying

documents means that used electrical and electronic

products should not disposed of with household waste. To

ensure proper disposal of the product, hand it over to a

designated collection point, where it will be accepted free

of charge. The correct disposal of this product will help to

save valuable natural resources and prevent any potential

negative impacts on the environment and human health,

which could otherwise be caused by inappropriate

disposal of wastes. For more details, please, contact your

local authorities or the nearest collection point. The

improper disposal of this waste can be penalized in

accordance with national regulations. Information for

users to disposal of electrical and electronic devices

(corporate and business use): For proper disposal of

electrical and electronic devices, ask for details from your

dealer or distributor. Information for users to disposal of

electrical and electronic devices in other countries

outside.

EU: The above mentioned symbol (crossed-out

wheeled bin) is valid only in the countries of EU. For

proper disposal of electrical and electronic devices, ask for

details from your authorities or dealer. All is expressed by

the symbol of crossed-out wheeled bin on product,

packaging or in printed materials.

Set up the claim for warranty repair of device at your

dealer. If you have technical questions or problems,

20

contact your dealer. Follow the rules for working with

electrical equipment. The user may not dismantle the

device or replace any part of this. Opening or removing

the covers poses the risk of electric shock. In case of

incorrect reassembly and subsequent connection you are

also exposed to electric shock.

Declaration of Conformity: Company INTELEK.CZ s.r.o.

hereby declares that CS1, CS6, CS9 devices are in

compliance with essential requirements and other

relevant provisions of Directive 2014/53/EU. The full text

of the EU Declaration of Conformity is available on this

website www.iget.eu.

The warranty period of the product is 24 months, unless

stated otherwise.

This device can be used in the following countries bellow.

Italy - The conditions for using the WiFi network are

described in the so-called Electronic Communications

Code

Norway - The 2.4 GHz limitation applies only to the area

20 km from colony of Ny-Ålesund.

RoHS: The components used in the device meet the

requirements on the restriction of hazardous substances

in electrical and electronic devices in accordance with

Directive 2011/65/EU. The RoHS declaration can be

downloaded from www. iget.eu.

Operation of radio equipment:

CZ: This radio equipment can be operated in the Czech

Strona jest ładowana ...

iGET CS1 instrukcja

iGET CS1 instrukcja

w innych językach

Powiązane dokumenty

Inne dokumenty