CONDTROL GFX 360 Instrukcja obsługi

Marka: CONDTROL

Model: GFX 360

Typ: Instrukcja obsługi

EN User manual 1

R U Р уков одство поль зов ателя 2

PL Instrukcja obsługi 3

GFX3602

User manual

Cross line laser

Congratulations on your purchase of laser levels CONDTROL

GFX 3602.

Safety instructions can be found in the end of this user manual

and should be carefully read before you use the device for the

first time.

SAFETY INSTRUCTIONS

Attention! This user manual is an essential part of this

product.

The user manual should be read carefully before you use the

product for the first time. If the product is given to someone

for temporary use, be sure to enclose user manual to it.

- Do not misuse the product;

- Do not remove warning signs and protect them from

abrasion, because they contain information about safe

operation of the product.

- Do not look into the laser beam or its reflection, with

unprotected eye or through an optical instrument. Do not

point the laser beam at people or animals without the need.

You can dazzle them.

- To protect your eyes close them or look aside.

- Always install the product in such a way, so that laser line is

below or above eye level.

- Do not let unauthorized people enter the zone of product

operation.

- Store the product beyond reach of children and unauthorized

people.

- It is prohibited to disassemble or repair the product yourself.

Entrust product repair to qualified personnel and use original

spare parts only.

- Do not use the product in explosive environment, close to

flammable materials.

- Laser intensive glasses are used for better recognition of the

laser beam, do not use them for other purposes. Laser glasses

do not protect from laser radiation as well as ultraviolet

radiation and reduce color perception.

- Avoid heating the batteries to avoid the risk of explosion and

electrolyte leakage. In case of liquid contact with skin, wash

it immediately with soap and water. In case of contact with

eyes, flush with clean water during 10 minutes and consult the

doctor.

PRODUCT DESCRIPTION

Laser level GFX 3602 CONDTROL is designed for projecting and

controlling of vertical and horizontal planes and lines.

The laser level has 2 operating modes:

- Locked compensator, to project inclined planes and lines;

- Automatic leveling, which allows to automatically

compensate irregularities within self-leveling range of ±5°.

Pulse mode allows to increase working range of the laser level

by using the laser receiver or to work when laser is hard to

define in bright lighting conditions.

Laser level is suitable for use at both indoor and outdoor

building areas.

GFX 360

1 - Laser beam exit windows

2 - Control panel

3 - Battery door

4 - Tripod thread 1/4’’

5 - Switch bar

6 - Magnets for fixing on vertical structures

7 - Hole for fixing by the cable tie

8 - Hole for fixing on a screw/nail

Control panel

1 - Switch on/off the laser lines

2 - Switch on/off the pulse mode

3 - Power indicator

4 - Locked mode indicator

5 - Pulse mode indicator

TECHNICAL SPECIFICATIONS

Working range/

with receiver* 20 m/40 m

Self-levelling accuracy ±0.3 mm/m

Self-levelling range ± 5°

Working temperature -10°C ... +50°C

Storage temperature 

Relative humidity 90%

Dust and water

protection rate IP54

Thread for mounting

on a tripod 1/4’’

Laser type Class II 520 nm, < 1 mW

Battery 3.7V 3000 mAh Li-ion

rechargeable

Dimensions 112x50x98 mm

Weight 340 g

* The working range may differ from the declared depending

on the lighting conditions.

Check of vertical line

Use a plumb bob as a reference of a vertical line. Put the laser

level at 1.5m distance from the plumb bob. (Fig. E).

1. Move the switch bar on position ON, and align vertical laser

line with the low point of plumb bob.

2. If deviation between the laser line and the plumb line

exceeds 0,3 mm per 1m of plumb bob length (for a 2.5m plumb

bob deviation shouldn’t exceed 0.7 mm) – please contact the

service center.

CARE AND MAINTENANCE

Attention! This laser level is a precise optic-mechanical device

and requires careful handling. Before starting work, as well

as after mechanical influences (falling, bumps), check the

accuracy of the device.

Observation of the following recommendations will extend

the life of the device:

- Store the device, spare parts and accessories away from

children and unauthorized people.

- Transport the device with locked compensator only.

- Protect the device from bumps, falls, and excessive vibration;

do not let moisture, construction dust and foreign objects get

inside the device.

- In case moisture gets inside the device, first of all, remove the

batteries and then contact the service center.

- Do not store or use the device for a long time in high humidity

conditions.

- Check the accuracy of the device occasionally (check the

paragraph «Accuracy check»).

- Clean the device with a soft wet cloth. Do not use harsh

chemicals, cleaning solvents or cleaning agents.

- Wipe the laser aperture with a soft lint-free cloth and

isopropyl alcohol.

- Remove the Li-ion battery or alkaline batteries from the

device before connecting the charger, otherwise the device

may fail.

Failure to observe the following rules may lead to electrolyte

leakage from the batteries and failure of the device:

- Remove the batteries from the device, if it’s not used for a

long time.

- Do not leave discharged batteries in the device.

- Avoid heating the batteries to avoid the risk of explosion and

electrolyte leakage. In case of liquid contact with skin, wash

it immediately with soap and water. In case of contact with

eyes, flush with clean water during 10 minutes and consult the

doctor.

UTILIZATION

Expired tools, accessories and package should be passed

for waste recycle. Please send the product to the following

address for proper recycle:

CONDTROL GmbH

Wasserburger Strasse 9

84427 Sankt Wolfgang

Germany

Do not throw the product in municipal waste!

     

measuring tools and their components must be collected

separately and submitted to environmentally friendly recycle

of wastes.

WARRANTY

All CONDTROL GmbH devices go through post-production

control and are governed by the following warranty terms. The

buyer’s right to claim about defects and general provisions of

the current legislation do not expire.

1) CONDTROL GmbH agrees to eliminate all defects in the

device, discovered during the warranty period, that represent

the defect in material or workmanship in full volume and at its

own expense.

2) The warranty period is 24 months and starts from the date

of purchase by the end customer (see the original supporting

document).

3) The warranty doesn’t cover defects resulting from wear

and tear or improper use, malfunction of the device caused

by failure to observe the instructions of this user manual,

untimely maintenance and service and insufficient care, the

use of non-original accessories and spare parts. Modifications

in design of the device relieve the seller from responsibility

for warranty works. The warranty does not cover cosmetic

damage, that doesn’t hinder normal operation of the device.

4) CONDTROL GmbH reserves the right to decide on

replacement or repair of the device.

5) Other claims not mentioned above, are not covered by the

warranty.

6) After holding warranty works by CONDTROL GmbH warranty

period is not renewed or extended.

7) CONDTROL GmbH is not liable for loss of profit or

inconvenience associated with a defect of the device, the

rental cost of alternative equipment for the period of repair.

This warranty applies to German law except provision of the

United Nations Convention on contracts for the international

sale of goods (CISG).

In warranty case please return the device to retail seller or

send it with defect description to the following address:

CONDTROL GmbH

Wasserburger Strasse 9

84427 Sankt Wolfgang

Germany

Laser radiation! Do not stare into beam

Class 2 laser

<1 mW 520 nm

EN60825-1: 2007-03

Cross line laser

Лазерный нивелир

Laser krzyżowy

DELIVERY PACKAGE

Laser level – 1 pc.

Cable tie – 1 pc.

Battery (3.7V 3000 mAh Li-ion) – 1 pc.

Adapter for batteries – 1 pc.

Charging cable – 1 pc.

Pouch – 1 pc.

User manual – 1 pc.

BEFORE START OPERATION

Power supply

The laser level is powered by a 3.7V 3000 mAh Li-ion

rechargeable battery included in the delivery package.

Install/replace batteries/charge the Li-ion battery

Install the battery in the battery compartment, observing the

polarity.

Use only the battery included in the delivery package.

If the power indicator on the control panel becomes red,

charge the battery.

The battery should be charged in the following way:

1) Remove the battery from the device.

2) Connect the charger to the power source with a charging

cable, included in the delivery package.

The battery charging time depends on the current of the used

adapter:

#Current Charging time

1 500 mA 6 hours

21000 mA 3 hours

32A 1.5 hours

Note: It is forbidden to use adapters with an output voltage of

more than 5V! It may lead to damage of the battery.

3) As soon as the charging time runs out, disconnect the

charger and put the battery in the battery compartment.

OPERATION

Install the device on a firm and stable surface or tripod.

Move the switch bar to select the required operation mode:

Unlocked mode (self-leveling)

Move the switch bar to position ON.

The laser level will switch on.

Short press to switch on required laser lines.

Short press to switch on/off the pulse mode.

Move the switch bar to position OFF to switch off the laser

level.

Locked mode (projection of inclined planes)

The switch bar is in position OFF.

Press and hold during 3 seconds to switch on the laser.

Long press to switch on required laser lines.

After all possible combinations of lines are switched on, the

next long press will switch off the laser level.

Press and hold during 3 seconds to switch on/off the

pulse mode.

Note: To increase the operating time and avoid the risk of

unintentional blinding switch on the laser only before start

operation.

If operated near objects or airflows different from the

environment temperature the laser line may tremble due to

heterogeneity of the atmosphere. The longer the distance, the

more trembling can be observed.

The width of the laser line increases with the increasing of the

operating distance. The marking should be made along the

axis of the laser line. For maximum accuracy, use the middle

portion of the laser line.

It should be noted that the shape of the laser line on the

object’s surface (e.g. walls, ceilings) depends on the curvature

and slope of the surface relative to the laser plane.

ACCURACY CHECK

Check of horizontal plane

Check of horizontal line is carried out by using 2 walls located

opposite each other at a 5m distance.

1 Put the laser level to one of the walls as close as possible

(Figure A). Move the switch bar to position ON and switch

on both vertical and horizontal planes. Rotate the laser level

so that laser emitters are located opposite to the near wall

and laser lines cross each other. Mark location of laser lines



wall as B1.

2. Rotate the laser level by 90°, measure deviation of a laser

           

please contact the service center.

3. Repeat actions described in point 2 twice, rotating the laser

level in one direction.

4. Install the laser level closer to the opposite wall. Mark

           

located at the same vertical) (Figure C).

5. Rotate the laser level by 180°and mark location of laser lines

crossing on the opposite wall as A2 (points A1, A2 must be

located at the same vertical) (Figure D).

      



exceeds 3 mm – please contact the service center.

3 5

5m 1.5m

    

CONDTROL GFX 3602.

    

     

    



УКАЗАНИЯ ПО ТЕХНИКЕ БЕЗОПАСНОСТИ

Внимание! 

     

    

     

     







      



          

      

       



      







       







      

    

     



     



      

      

     



         



ОПИСАНИЕ ПРИБОРА

2

     





     



     



    

       

      



      





















Панель управления











ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ



 



 



 ± 5°

 -10°C ... +50°C

 



 90%



 IP54



 1/4’’

 

 



 

 





КОМПЛЕКТАЦИЯ















Проверка вертикали

     





    





       

        

       

        











IEC 60825-1: 2007-03

ПОДГОТОВКА К РАБОТЕ С ПРИБОРОМ

Питание прибора

     

      



Установка/замена батареек/зарядка литий-ионного

аккумулятора

     



     



      







       





      



  

1 

2 

32A 

Внимание:    

       



      



РАБОТА С ПРИБОРОМ

     





Режим автоматической компенсации

     ON.







        



    

OFF.

Режим построения наклонных плоскостей

OFF.





                           











    



Внимание:      

    





      

     

    

     



     

     





      

 

        



ПРОВЕРКА ТОЧНОСТИ

Проверка горизонтали









     

   

      

     

    











         





       



       

    

        



         

        

        



3 5

5м

1.5м

Руководство пользователя

Лазерный нивелир

GFX3602

УХОД И ЭКСПЛУАТАЦИЯ

Внимание!

     





Соблюдение следующих рекомендаций продлит срок

службы прибора:





     



      

     



         





        



      



       

    



      



Несоблюдение следующих правил может привести к

вытеканию электролита из элементов питания и порче

прибора:

        





      

      

     



         



ГАРАНТИЙНЫЕ ОБЯЗАТЕЛЬСТВА

      



     

     



    

    

    



   

      

      

       







УТИЛИЗАЦИЯ

    

     





        





Только для стран-членов ЕС:



     





    

      









     

    

   



СЕРВИС И КОНСУЛЬТАЦИОННЫЕ УСЛУГИ

      



Gratulujemy zakupu niwelatora laserowego CONDTROL

GFX 3602.

      

     



ZALECENIA DOTYCZĄCE BEZPIECZEŃSTWA

Uwaga! 

     

      

      





         







      

        



- Ochrona oczu polega zazwyczaj na odwodzeniu wzroku lub

zamykanie oczu.

        



        







      

     

     



       





     







ОPIS URZĄDZENIA

Niwelator laserowe GFX 3602

      

poziomymi.









do 5°.

      

        

      

widoczna.







2 - Panel kontrolny

3 - Pokrywka komory baterii

4 - Gwint pod statyw 1/4’’









Panel sterowania











CHARAKTERYSTYKA TECHNICZNA

Zakres roboczy/z

detektorem* 20 m/40 m



samoczynnego

poziomowania

±0.3 mm/m

Zakres samoczynnego

poziomowania ± 5°

Temperatura robocza -10°C ... +50°C



przechowywania 



powietrza 90%



 IP54

Rodzaj gwintu do

 1/4’’

 Klasa II 520 nm < 1 MW

 

akumulator litowo-jonowy

Wymiary gabarytowe 112x50x98 mm

Waga 340 g





WYPOSAŻENIE

Niwelator laserowy – 1 szt.

Opaska kablowa – 1 szt.











Sprawdzanie pionu





E).

     











Promieniowanie laserowe!



Laser klasy 2

<1 MW, 520 nm

IEC 60825-1: 2007-03

PRZYGOTOWANIE DO PRACY Z PRZYBOREM

Zasilanie urządzenia

       

akumulatora litowo-jonowego 3,7 V 3000 mAh.

Instalacja/zamiana baterii/ładowanie litowo-jonowego

akumulatora

       













       



      

stosowanego adaptera:

Nr  

1 6 godzin

2 3 godziny

32A 1,5 godziny

Uwaga:      

       

uszkodzenie baterii.

        



OBSŁUGA NARZĘDZIA



na statywie.



Tryb automatycznej kompensacji















OFF.

Tryb tworzenia płaszczyzny nachylonej











laserowe.





     



Uwaga:   

    



      

       

      



       

      

      



       

        



KONTROLA DOKŁADNOŚCI

Sprawdzanie poziomu

        



        

        



  

     

       



        

     





jednym kierunku.

      

 



        





       



         

serwisowym.

3 5

1.5m

KONSERWACJA I EKSPLOATACJA

Uwaga!    

    

      

    



Przestrzeganie następujących zaleceń przedłuży okres

użytkowania urządzenia:

   



     

kompensatorem.

      



        

       

centrum serwisowym.

       







       

    



      



Nieprzestrzeganie następujących zasad może spowodować

wyciek elektrolitu z baterii i uszkodzenie urządzenia:









         

       





UTYLIZACJA







recyklingu:

CONDTROL GmbH

Wasserburger Strasse 9

84427 Sankt Wolfgang

Niemcy



     

       





GWARANCJA





        





     

  









       

    

   

      





     









        



6) Po wykonaniu prac gwarancyjnych przez CONDTROL GmbH



       





Niniejsza gwarancja ma zastosowanie do prawa niemieckiego z





       



adres:

CONDTROL GmbH

Wasserburger Strasse 9

84427 Sankt Wolfgang

Germany

Instrukcja obsługi

Laser krzyżowy

GFX3602

CONDTROL GFX 360 Instrukcja obsługi

Marka: CONDTROL

Model: GFX 360

Typ: Instrukcja obsługi

ściągnij PDF

raport

w innych językach

русский: CONDTROL GFX 360 Руководство пользователя

Powiązane dokumenty

Inne dokumenty

Pro Smart-XG Instrukcja obsługi