Application Sheet

SpeedUp Wall Heating

Dry construction with wood battens

Fibre reinforced plasterboard

1 Dry walling screws

2 Wood battens, 30 mm

3 SpeedUp panel, 30 mm

4 Danfoss composite pipe 16 x 2 mm

5 Fibre reinforced plasterboard, 12.5 mm

Surface smoothness +/- 3 mm per 1 m. Observe building regulation requirements con-

cerning thermal insulation. Moisture condensation can occur and should be taken into

consideration when planning wall heating on outer walls or walls between heated and

unheated rooms.

Wall coverings

Fermacell/fibre reinforced plasterboard: 0.32 W/m²K; maximum flow temperature: 55°C;

form board butt joints as glued joint. Form wall attachment with an elastic acrylic joint

or joint filler on divider.

Construction:

Refering to EN 1264