Application Sheet

SpeedUp Eco Wall Heating

Dry construction with wood battens

Fibre reinforced plasterboard

1 Dry walling screws

2 Wood battens, 30 mm

3 SpeedUp Eco panel, 30 mm

4 Danfoss composite pipe 16 x 2 mm

5 Fibre reinforced plasterboard, 12.5 mm

Surface smoothness of +/- 3 mm per 1m. Observe building regulation requirements

concerning thermal insulation. Moisture condensation can occur and should be taken

into consideration when planning wall heating on outer walls and walls between heated

and unheated rooms.

Wall coverings

Fermacell/fibre reinforced plasterboard: Thermal conductivity 0.32 W/m²K; maximum

flow temperature 55°C; form board butt joint as glued joint. Form wall attachment with

an elastic acrylic joint or joint filler on divider.

Construction:

Refering to EN 1264