Override key:
For your convenience, we have engineered a manual override system
for your safe. If you forget or misplace your combination, remove the
battery cover place and take out the batteries. Your will find the
keyhole, insert the key into the keyhole and turn it in a
counter-clockwise direction, turn the knob in a clockwise direction.
This will manually open your safe any time. This product is supplied
with 2 original keys.
Do not keep the key in your safe. In event of battery failure you will
not be able to open the safe.
Programming the user code:
A.Press the red button(b)(see diagram 2), then release it and display
on the panel will show”-----“
B.Press “START” immediately.
C.Now press your 6 digits that you wish to use as a new user code.
The display will show “IN” and your inputting numbers. It means that
the new user code is confirmed.
Programming the master code:
A.Press the “START” button. The display will show “-----“.
B.Now input your new 6 digits
C.Press the red button inside (b) (see diagram 2). The display will
show “IN”. It means that new master code is confirmed.
If you or an intruder uses the incorrect group of numbers, the display
will show ”ERROR” and it will not open.
If the incorrect combination code is used 4 times consecutively, the
display will show “ERROR” and the system cannot be entered until 3
minutes later. The override key can be used to open the door during
the 3 minutes. If the key is used to open the door, the buzzer can be
cleared by pressing the red button.
Battery replacement:
To test the batteries, just press the button “START”. If the batteries
are low, the display will show “LOBAE”, AND YOU SHOULD REPLACE
THE BATTERIES. The safe requires 4 X size “AA” (1.5V R06) batteries.
Replace the old battery, the display will scan the status of the
electronic lock system automatically. If it is in order, the display will
show “GOOD”. Use of alkaline batteries is recommended.
04 05