Panasonic VDRD300EP Instrukcja obsługi

Cover

Operating Instructions

Instrukcja obsługi

DVD Video Camera

Model No.VDR-D300EP

VDR-D250EP

≥ The illustration shows VDR-D300.

≥ VDR-D250 does not have a built-in flash.

≥ Ilustracja przedstawia model VDR-D300.

≥ Model VDR-D250 nie ma wbudowanego flesza.

Before use, please read these instructions

completely.

Przed pierwszym włączeniem kamery prosimy o

dokładne przeczytanie instrukcji obsługi.

(VDR-D300)

LSQT1019 A

LSQT1019(ENG).book 1 ページ２００６年２月３日　金曜日　午後４時３７分

2

LSQT1019

Left/Right

∫ Warning

To prevent electric shock, do not remove

the cover (or back); there are no user

serviceable parts inside.

Refer servicing to qualified service

personnel.

∫ EMC Electric and magnetic

compatibility

This symbol (CE) is located on the rating plate.

Use only the recommended accessories.

≥ Keep the Memory Card out of reach of

children to prevent swallowing.

As this equipment gets hot during use,

operate it in a well-ventilated place; do

not install this equipment in a confined

space such as a bookcase or similar unit.

To reduce the risk of fire, electric shock

or product damage, do not expose this

equipment to rain, moisture, dripping or

splashing and ensure that no objects

filled with liquids, such as vases, shall be

placed on the equipment.

AC Adaptor

≥ The rating plate is on the underside of

the AC Adaptor.

IEC 60825-1:2001

CAUTION

This product contains a laser diode of higher

class than 1. To ensure continued safety, do

not remove any covers or attempt to gain

access to the inside of the product. Refer all

servicing to qualified personnel.

CLASS 1

LASER PRODUCT

Information on Disposal for Users of

Waste Electrical & Electronic Equipment

(private households)

This symbol on the products

and/or accompanying

documents means that used

electrical and electronic

products should not be mixed

with general household

waste.

For proper treatment,

recovery and recycling, please take these

products to designated collection points,

where they will be accepted on a free of

charge basis. Alternatively, in some

countries you may be able to return your

products to your local retailer upon the

purchase of an equivalent new product.

Disposing of this product correctly will help

to save valuable resources and prevent any

potential negative effects on human health

and the environment which could otherwise

arise from inappropriate waste handling.

Please contact your local authority for further

details of your nearest designated collection

point.

Penalties may be applicable for incorrect

disposal of this waste, in accordance with

national legislation.

For business users in the European

Union

If you wish to discard electrical and

electronic equipment, please contact your

dealer or supplier for further information.

Information on Disposal in other

Countries outside the European Union

This symbol is only valid in the European

Union.

If you wish to discard this product, please

contact your local authorities or dealer and

ask for the correct method of disposal.

LSQT1019(ENG).book 2 ページ２００６年２月３日　金曜日　午後４時３７分

ENGLISH

3

LSQT1019

∫ Indemnity concerning recording content

The manufacturer shall in no event be liable for the loss of recordings due to malfunction or defect

of this unit, its accessories or recordable media.

∫ Carefully observe copyright laws

Recording of pre-recorded tapes or discs or other published or broadcast material for

purposes other than your own private use may infringe copyright laws. Even for the

purpose of private use, recording of certain material may be restricted.

≥ SD Logo is a trademark.

≥ The Movie Camera uses copyright-protected technologies and is protected by the patented

technologies and intellectual properties of Japan and the U.S. To use these copyright-protected

technologies, authorization of the Macrovision Company is required. It is prohibited to

disassemble or modify the Movie Camera.

≥ Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

≥ LEICA is a registered trademark of Leica microsystems IR GmbH and DICOMAR is a registered

trademark of Leica Camera AG.

≥ Microsoft

®

, Windows

®

and DirectX

®

are either registered trademarks or trademarks of the

Microsoft Corporation in the United States and/or other countries.

≥ IBM and PC/AT are registered trademarks of International Business Machines Corporation of the

U.S.

≥ Intel

®

, Pentium

®

and Celeron

®

are the registered trademarks or trademarks of the Intel

Corporation.

≥ Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.

≥ Other names of systems and products mentioned in these instructions are usually the registered

trademarks or trademarks of the manufacturers who developed the system or product concerned.

These operating instructions are designed for use with models VDR-D300 and VDR-D250. Pictures

may be slightly different from the original.

≥ The illustrations used in these operating instructions show model VDR-D300, however, parts of

the explanation refer to different models.

≥ Depending on the model, some functions are not available.

≥ Features may vary, so please read carefully.

LSQT1019(ENG).book 3 ページ２００６年２月３日　金曜日　午後４時３７分

4

LSQT1019

Before using

Features ................................................6

Accessories ..........................................8

Parts identification and handling......10

Using the LCD monitor............................ 16

Using the viewfinder ................................ 16

Using the remote control ......................... 17

Discs and cards..................................20

Discs that can be used on this unit ......... 20

Cards that you can use with this unit ...... 23

Disc and card handling............................ 24

Setup

Power supply ......................................25

Charging the battery................................ 25

Connecting to the AC outlet .................... 29

Turning the unit on/off ............................. 29

Inserting/removing a disc..................32

Inserting/removing an SD card ......... 34

Selecting a mode................................35

How to use the joystick......................36

Switching the language .....................42

Using the menu screen......................43

Setting date and time .........................46

Adjusting LCD monitor/

viewfinder............................................48

Recording

Before recording................................ 50

Recording motion pictures ............... 52

Changing the recording mode of

the motion picture ....................................54

Recording still pictures..................... 55

Number of pixels and picture quality

for still picture recording ..........................58

Various recording functions ............. 60

Zoom in/out function ................................60

Recording yourself...................................62

Backlight compensation function .............63

Fade in/fade out function .........................64

Soft skin mode.........................................66

Tele macro function .................................67

Colour night view functions......................68

Self-timer recording .................................69

Wind noise reduction function .................70

Wide mode ..............................................71

Image stabilizer function..........................72

Built-in flash (VDR-D300 only).................73

Manual recording functions.............. 75

Scene mode ............................................75

Manual focus adjustment.........................77

White balance..........................................78

Manual shutter speed/

aperture adjustment................................. 80

Playback

Motion picture playback.................... 81

Still picture playback......................... 85

Playing back still pictures as

a slide show.............................................86

Contents

LSQT1019(ENG).book 4 ページ２００６年２月３日　金曜日　午後４時３７分

5

LSQT1019

Editing

Editing scenes.................................... 87

Deleting scenes .......................................87

Dividing a scene ......................................89

Combining scenes ...................................90

Using playlists.................................... 91

What is a playlist?....................................91

Creating a new playlist ............................92

Playing back a playlist .............................93

Editing a playlist.......................................94

Editing still pictures......................... 100

Deleting still pictures..............................100

Locking still pictures ..............................102

DPOF setting .........................................103

Disc and card management

Formatting discs and cards ............ 104

Formatting discs ....................................104

Formatting an SD card ..........................105

Finalizing a disc ............................... 106

Finalizing a disc .....................................106

Un-finalizing a DVD-RW ........................107

Protecting a disc .............................. 108

Displaying disc information ............ 109

With other products

With a TV........................................... 110

Playback on TV ..................................... 110

With a DVD recorder/player............. 112

Playback on DVD recorder/player ......... 112

Copying recordings onto

a DVD recorder’s hard disk ................... 113

With a VCR........................................ 114

Dubbing images onto other

video devices......................................... 114

With a printer (PictBridge)............... 115

With a computer

Before using with a computer ......... 118

What you can do with a computer..........118

Contents on provided CD-ROM .............119

Operating environment ......................... 121

End User License Agreement ............... 124

Installation.........................................125

Installing DVD-RAM Driver.................... 125

Installing DVD-MovieAlbumSE.............. 127

Installing DVDfunSTUDIO..................... 128

Reading the operating instructions

of the software applications .................. 129

Software application uninstallation........ 129

Connection and recognition............130

Connection and recognition

procedures ............................................ 130

About the computer display .................. 131

To disconnect USB cable safely............ 132

Verifying the unit is correctly

recognized by the computer.................. 133

Creating a DVD-Video disc on a

computer ...........................................134

Creating a DVD-Video on

a computer from a DVD-RAM

or DVD-RW (VR format)........................ 134

Others

Menus ................................................137

Menu list................................................ 137

Other menus ......................................... 139

Indications.........................................141

Indications............................................. 141

Messages.............................................. 144

Functions that cannot be used

simultaneously ...................................... 147

Frequently asked questions............148

Troubleshooting ...............................150

Cautions for use ...............................156

Explanation of terms ........................161

Specifications ...................................163

Number of recordable pictures on

an SD card ............................................ 166

LSQT1019(ENG).book 5 ページ２００６年２月３日　金曜日　午後４時３７分

Before using

Features

6

LSQT1019

Before using

Features

∫ Easy recording! (l 52)

No need to search for the recording start position.

The new recording will not overwrite any previously recorded scene.

∫ Easy playback! (l 81)

Recorded scenes are displayed as thumbnails.

You can easily search for the scenes you want to watch.

∫ Editing scenes! (l 87, 91)

You can create an original video (playlist) by collecting your favourite scenes together and then

easily dub this video to a VCR or a DVD recorder hard disk.

LSQT1019(ENG).book 6 ページ２００６年２月３日　金曜日　午後４時３７分

Before using

Features

7

LSQT1019

∫ Using with DVD player/recorder! (l 112)

Just insert the disc into a DVD player/recorder compatible with 8 cm discs to play back the scenes

recorded with this unit on it.

If you have a DVD recorder with hard disk, you can dub scenes recorded on a disc with this unit to

the hard disk.

∫ Using with a computer! (l 118)

You can enjoy editing scenes with the software on the supplied CD-ROM and creating original

DVD-Video discs.

LSQT1019(ENG).book 7 ページ２００６年２月３日　金曜日　午後４時３７分

Before using

Accessories

8

LSQT1019

Accessories

Check the accessories before using this unit.

Battery pack

CGA-DU12

AC adaptor

VSK0651B (DE-974GB)

DC cable

K2GJ2DZ00018

AV/S cable

K2KZ9CB00001

AC cable

K2CR2DA00004

Remote control

N2QAEC000019

Button-type battery

CR2025

Lens cap

(VDR-D250 only)

VYF3031

Shoulder strap

VFC3506-1A

USB cable

K1HA05CD0010

CD-ROM

Disc cleaning cloth

VFC3778-2

LSQT1019(ENG).book 8 ページ２００６年２月３日　金曜日　午後４時３７分

Before using

Accessories

9

LSQT1019

Some optional accessories may not be available in some countries.

Optional accessories

AC adaptor (VW-AD11E)

Battery pack (lithium/CGA-DU12/1150 mAh)

Battery pack (lithium/CGA-DU14/1360 mAh)

Battery pack (lithium/CGA-DU21/2040 mAh)

Wide conversion lens (VW-LW3707M3E)

Tele conversion lens (VW-LT3714ME)

Filter kit (VW-LF37WE)

Video DC light (VW-LDC10E)

Light bulb for video DC light (VZ-LL10E)

Stereo microphone (VW-VMS2E)

Tripod (VW-CT45E)

8 cm DVD-RAM disc (single sided/

LM-AF30E)

8 cm DVD-RAM disc (double sided/

LM-AF60E)

8 cm DVD-RW disc (single sided/

LM-RW30E)

8 cm DVD-RW disc (double sided/

LM-RW60E)

8 cm DVD-R disc (single sided/LM-RF30E)

LSQT1019(ENG).book 9 ページ２００６年２月３日　金曜日　午後４時３７分

Before using

Parts identification and handling

10

LSQT1019

Parts identification and handling

1 Lens (LEICA DICOMAR) (VDR-D300)

Lens (VDR-D250)

2 Built-in flash (VDR-D300 only) (l 73)

3 Recording lamp (l 139)

4 White balance/remote control sensor (l 79, 19)

5 Terminal cover

6 Audio-video output terminal [A/V] (l 110, 114)

7 USB terminal [ ] (l 115, 130)

8 Lens cover (VDR-D300 only)

9 Microphone (built-in, stereo)

10 Microphone terminal [MIC]

≥ A compatible plug-in powered microphone can be used

as an external microphone.

≥ When the unit is connected with AC adaptor, sometimes

noise may be heard depending on microphone type. In

that case, please switch to battery for power supply and

noise will stop.

11 Viewfinder (l 16)

12 Delete button [ ] (l 87, 98, 100)

13 LCD monitor open part [OPEN] (l 16)

14 Battery/DC cable holder (l 26, 29)

15 Power switch [OFF/ON] (l 29)

16 Status indicator (l 29)

17 Mode dial (l 35)

18 Joystick (l 36)

≥ Move up, down, left or right to select items.

≥ Press the centre to enter the selection.

19 Recording start/stop button (l 52)

20 Menu button [MENU] (l 43)

Due to limitations in LCD production

technology, there may be some tiny bright or

dark spots on the viewfinder screen.

However, this is not a malfunction and does

not affect the recorded picture.

1

2

3

4

6

7

5

8

9

10

12

11

13

14

15

16

19

17

18

20

LSQT1019(ENG).book 10 ページ２００６年２月３日　金曜日　午後４時３７分

Before using

Parts identification and handling

11

LSQT1019

21 Accessory shoe

≥ Accessories, such as a stereo microphone (optional),

are attached here.

22 Eyepiece corrector knob (l 49)

23 Zoom lever [W/T] (l 60)

Volume lever [sVOLUMEr] (l 83)

24 Photoshot button [PHOTO SHOT] (l 55)

25 Card slot cover (l 34)

26 Card slot (l 34)

27 Tripod receptacle (l 15)

28 Card access lamp (l 34)

29 Battery release lever [BATTERY RELEASE]

(l 26)

30 Speaker

31 LCD monitor (l 16)

32 Mode select switch [AUTO/MANUAL/FOCUS]

(l 51, 75)

33 Power LCD button [POWER LCD] (l 48)

34 Reset button [RESET] (l 154)

35 Disc eject lever [DISC EJECT] (l 32)

36 Disc/computer access lamp [ACCESS/PC]

(l 32, 131)

37 Disc compartment (l 32)

38 Grip belt (l 12)

39 Shoulder strap fixture (l 12)

Due to limitations in LCD production

technology, there may be some tiny bright or

dark spots on the LCD monitor screen.

However, this is not a malfunction and does

not affect the recorded picture.

30

32

31

33

34

35

39

36 37 38

27 28 2925 26

21 22

24

23

LSQT1019(ENG).book 11 ページ２００６年２月３日　金曜日　午後４時３７分

Before using

Parts identification and handling

12

LSQT1019

Adjust the belt length so it fits your hand.

Adjust the belt length and the pad position.

1 Flip the belt.

2 Adjust the length.

3 Fix the belt.

Put the strap through the fixture 1 and

through the stopper 2 so it will not come

off. Extend part 3 by at least 2 cm.

Put the opposite end of the strap through A

and attach it in the same way.

Using grip belt

2

1

3

Shoulder strap fixture

A

1

2

3

LSQT1019(ENG).book 12 ページ２００６年２月３日　金曜日　午後４時３７分

Before using

Parts identification and handling

13

LSQT1019

In order to remove the lens hood, rotate it counter-clockwise A. In order to fit it, place into slot B,

and then rotate it clockwise C.

≥ (VDR-D300 only) The lens hood has a built-in lens cover.

Lens hood

B

C

A

≥ Fit the MC protector or the ND filter of the Filter Kit

(VW-LF37WE; optional) in front of the lens hood. Do

not fit the other accessories on the hood. (Except

for the lens cap)

(Refer to the operating instructions for the Filter Kit.)

≥ When fitting the tele conversion lens

(VW-LT3714ME; optional) or the wide conversion

lens (VW-LW3707M3E; optional), first remove the

lens hood.

(Refer to the operating instructions for the tele

conversion lens or the wide conversion lens.)

≥ When 2 lens accessories, such as the ND filter and

tele conversion lens, are fitted and the W/T lever is

pressed toward the W side, the 4 corners of an

image will be darkened. (Vignetting)

LSQT1019(ENG).book 13 ページ２００６年２月３日　金曜日　午後４時３７分

Before using

Parts identification and handling

14

LSQT1019

Fit the lens cap to protect the surface of the lens.

≥ When the MC protector or the ND filter of the Filter Kit (VW-LF37WE; optional) is attached to the

front of the lens hood, use the lens cap included in the Filter Kit.

1 Pass the end of the lens cap cord through the belt.

2 Pass the lens cap through the loop made by itself.

3 To fit or remove the lens cap, hold both sides of

the lens cap with the tips of your finger and

thumb.

During recording

The lens cap removed can be attached to the lens cap fixture.

Fitting the lens cap (Supplied: VDR-D250 only)/(Included in the Filter Kit

(VW-LF37WE; optional))

LSQT1019(ENG).book 14 ページ２００６年２月３日　金曜日　午後４時３７分

Before using

Parts identification and handling

15

LSQT1019

This is a hole for attaching the unit to the optional tripod.

(Please carefully read the operating instructions for how to

attach the tripod to the unit.)

≥ When the tripod is used, the card slot cover cannot be

opened. Insert an SD card before attaching this unit to the

tripod. (l 34)

Tripod receptacle

LSQT1019(ENG).book 15 ページ２００６年２月３日　金曜日　午後４時３７分

Before using

Parts identification and handling

16

LSQT1019

You can record the image while viewing it on the LCD monitor.

1 Place your finger on OPEN and pull

the LCD monitor out in the direction of

the arrow.

≥ It can open up to 90o.

2 Adjust the angle of the LCD monitor according to your preference.

≥ It can rotate up to 180o A towards the lens or 90o B towards the viewfinder.

Pull out the viewfinder.

The viewfinder will be activated. (If the LCD monitor is opened,

the viewfinder will be deactivated.)

Using the LCD monitor

B

A

≥ The brightness and colour level of the LCD monitor

can be adjusted from the menu. (l 48)

≥ If it is forcibly opened or rotated, the unit may be

damaged or fail.

≥ If the LCD monitor is rotated by 180x towards the

lens and the viewfinder is extended (when recording

yourself), the LCD monitor and the viewfinder

simultaneously light.

Using the viewfinder

≥ The brightness of the viewfinder (l 48) and the

field of view (l 49) can be adjusted.

LSQT1019(ENG).book 16 ページ２００６年２月３日　金曜日　午後４時３７分

Before using

Parts identification and handling

17

LSQT1019

1 Photoshot button [PHOTO SHOT]*

2 On-screen display button [EXT DISPLAY] (l 111)

3 Date/time button [DATE/TIME] (l 47)

4 Playback operation buttons (l 82, 83)

5 Delete button [ ]*

6 Direction buttons [3,4,2,1] (l 45)

7 Recording start/stop buttons [START/STOP]*

8 Zoom/volume buttons [ZOOM, VOL]*

9 Menu button [MENU]* (l 45)

10 Enter button [ENTER] (l 45)

* means that these buttons function in the same manner as the

corresponding buttons on the unit.

Using the remote control

ZOOM

START/

STOP

PHOTO

SHOT

EXT

DISPLAY

DATE/

TIME

VOL

PLAY

STOPSKIP SKIP

MENU

ENTER

PAU SE

SEARCH

STILL ADV STILL ADV

SEARCH

1

2

3

4

6

7

8

9

1

0

5

LSQT1019(ENG).book 17 ページ２００６年２月３日　金曜日　午後４時３７分

Before using

Parts identification and handling

18

LSQT1019

∫ Install a button-type battery

Install the button-type battery supplied in the remote control before using it.

1 While pressing the stopper A, pull out the

battery holder.

2 Set the button-type battery with its (i) mark

facing upward and get the battery holder back

in place.

A

∫ Concerning the button-type battery

≥ When the button-type battery runs down, replace it

with a new battery (part number: CR2025). The

battery is normally expected to last about 1 year, but

it depends on operation frequency.

≥ Keep the button-type battery out of the reach of

children.

Caution

Danger of explosion if battery is incorrectly

replaced. Replace only with the same or

equivalent type recommended by the

equipment manufacturer. Discard used

batteries according to manufacturer’s

instructions.

Warning

Risk of fire, explosion and burns. Do not

recharge, disassemble, heat above 100 xC

or incinerate. Keep the Button-Type battery

out of the reach of children. Never put

Button-Type battery in mouth. If swallowed

call your doctor.

LSQT1019(ENG).book 18 ページ２００６年２月３日　金曜日　午後４時３７分

Before using

Parts identification and handling

19

LSQT1019

∫ Remote control usable range

The distance between the remote control and the unit’s remote

control sensor A: Within approx. 5 m

Angle: Approx. 10o up and 15o down, left, and right

A

≥ The remote control is intended for indoor operation.

Outdoors or under strong light, the unit may not

operate properly even within the usable ranges.

LSQT1019(ENG).book 19 ページ２００６年２月３日　金曜日　午後４時３７分

Before using

Discs and cards

20

LSQT1019

Discs and cards

Discs that can be used on this unit

DIsc type DVD-RAM

8 cm

Single sided/

double sided

DVD-RW

8 cm

Single sided/double sided

DVD-R

8 cm

Single sided/

double sided

(DVD-RAM

Ver. 2.1)

[DVD-RW Ver. 1.1/

2X-SPEED (2X/1X)]

(DVD-R for

General Ver. 2.0)

Recording format DVD Video

Recording

format

(VR format)

DVD Video

Recording

format

(VR format)

DVD-Video

format

(Video format)

DVD-Video

format

(Video format)

Characteristic Rewritable disc Rewritable

disc

One time

recording disc

*1

*1 By formatting the disc, it can be used repeatedly. (l 104)

One time

recording disc

Display on the screen

Indication in these

instructions

(RAM) (-RW‹VR›) (-RW‹V›) (-R)

Functions

≥ Deleting recorded

scenes

¥¥ ––

≥ Editing on this unit ¥¥ ––

≥ Playback on other

products

*2

*2 DVD players and DVD recorders that support 8 cm discs.

¥

*3

*3 Playback is possible on compatible products.

¥

*4

*4 Playback is possible on compatible products. (May have to be finalized on this unit.)

¥

*5

*5 Must be finalized on this unit. (l 106)

¥

*5

≥ Recording after

finalizing

– ¥

¥

*6

*6 Un-finalize the disc. (l 107)

–

¥: available –: not available

LSQT1019(ENG).book 20 ページ２００６年２月３日　金曜日　午後４時３７分

Strona się ładuje...

Panasonic VDRD300EP Instrukcja obsługi

Niniejsza instrukcja jest również odpowiednia dla

Panasonic VDRD300EP Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty