Dell Latitude 120L Skrócona instrukcja obsługi

www.dell.com | support.dell.com

Dell™ Latitude™ 120L

Quick Reference Guide

Model PP21L

For information on other documentation included with your computer, see "Finding Information" on page 5.

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the

problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

Abbreviations and Acronyms

For a complete list of abbreviations and acronyms, see the Glossary in your computer

User’s Guide

.

If you purchased a Dell™ n Series computer, any references in this document to Microsoft

®

Windows

®

operating systems are not applicable.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, and Latitude are trademarks of Dell Inc.; Microsoft and Windows are registered trademarks

of Microsoft Corporation; Intel and Pentium are registered trademarks of Intel Corporation.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products.

Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Model PP21L

December 2005 P/N KD727 Rev. A00

Contents 3

Contents

Finding Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Setting Up Your Computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

About Your Computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Front View

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Left Side View

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Right Side View

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Back View

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Bottom View

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Using a Battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Battery Performance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Checking the Battery Charge

. . . . . . . . . . . . . . . . . . . . . . . . 12

Conserving Battery Power

. . . . . . . . . . . . . . . . . . . . . . . . . 13

Power Management Modes

. . . . . . . . . . . . . . . . . . . . . . . . 13

Configuring Power Management Settings

. . . . . . . . . . . . . . . . . 14

Charging the Battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Replacing the Battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Storing a Battery

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Lockups and Software Problems

. . . . . . . . . . . . . . . . . . . . . . 16

Dell Diagnostics

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4 Contents

Quick Reference Guide 5

Finding Information

NOTE: Some features or media may be optional and may not ship with your computer. Some features or media may

not be available in certain countries.

NOTE: Additional information may ship with your computer.

What Are You Looking For? Find It Here

• A diagnostic program for my computer

• Drivers for my computer

• My device documentation

• Notebook System Software (NSS)

Drivers and Utilities CD (also known as ResourceCD)

NOTE: The Drivers and Utilities CD may be optional and may

not ship with your computer.

Documentation and drivers are already installed on your

computer. You can use the CD to reinstall drivers (see

"Reinstalling Drivers and Utilities" in your User’s Guide) or

to run the Dell Diagnostics (see "Dell Diagnostics" in your

User’s Guide).

Readme files may be

included on your CD to

provide last-minute

updates about technical

changes to your computer

or advanced technical-

reference material for

technicians or experienced

users.

NOTE: Drivers and documentation updates can be found at

support.dell.com.

• Warranty information

• Terms and Conditions (U.S. only)

• Safety instructions

• Regulatory information

• Ergonomics information

• End User License Agreement

Dell™ Product Information Guide

6 Quick Reference Guide

• How to remove and replace parts

• Specifications

• How to configure system settings

• How to troubleshoot and solve problems

Dell Latitude™ User’s Guide

Microsoft Windows XP Help and Support Center

1

Click

Start

→

Help and Support

→

Dell User and System

Guides

→

System Guides

.

2

Click the

User’s Guide

for your computer.

• Service Tag and Express Service Code

• Microsoft Windows License Label

Service Tag and Microsoft

®

Windows

®

License

These labels are located on the bottom of your computer.

• Use the Service Tag to identify your computer when you

use

support.dell.com

or contact support.

• Enter the Express

Service Code to direct

your call when

contacting support.

• Solutions — Troubleshooting hints and tips, articles

from technicians, and online courses, frequently asked

questions

• Community — Online discussion with other Dell

customers

• Upgrades — Upgrade information for components, such

as memory, the hard drive, and the operating system

• Customer Care — Contact information, service call and

order status, warranty, and repair information

• Service and support — Service call status and support

history, service contract, online discussions with support

• Reference — Computer documentation, details on my

computer configuration, product specifications, and

white papers

• Downloads — Certified drivers, patches, and software

updates

• Notebook System Software (NSS)— If you reinstall the

operating system for your computer, you should also

reinstall the NSS utility. NSS provides critical updates

for your operating system and support for Dell™

3.5-inch USB floppy drives, Intel

®

Pentium

®

M processors, optical drives, and USB devices. NSS is

necessary for correct operation of your Dell computer.

The software automatically detects your computer and

operating system and installs the updates appropriate

for your configuration.

Dell Support Website — support.dell.com

NOTE: Select your region to view the appropriate support

site.

To download Notebook System Software:

1

Go to

support.dell.com

, select your business segment,

and enter your Service Tag.

2

Select

Drivers & Downloads

and click

Go.

3

Click your operating system and search for the keyword

Notebook System Software

.

NOTE: The support.dell.com user interface may vary

depending on your selections.

What Are You Looking For? Find It Here

Quick Reference Guide 7

• Software upgrades and troubleshooting hints

• Frequently asked questions, hot topics, and general

health of your computing environment

Dell Support Utility

The Dell Support Utility is an automated upgrade and

notification system installed on your computer. This

support provides real-time health scans of your computing

environment, software updates, and relevant self-support

information. Access the Dell Support Utility from the

icon in the taskbar. For more information, see "Accessing the

Dell Support Utility" in your

User’s Guide

.

• How to use Windows XP

• How to work with programs and files

• How to personalize my desktop

Windows Help and Support Center

1

Click

Start

→

Help and Support

.

2

Type a word or phrase that describes your problem and

click the arrow icon.

3

Click the topic that describes your problem.

4

Follow the instructions on the screen.

• Information on network activity, the Power Management

Wizard, hotkeys, and other items controlled by Dell

QuickSet

Dell QuickSet Help

To view

Dell QuickSet Help

,

right-click the icon

in the Microsoft

®

Windows

®

taskbar.

For more information on Dell QuickSet, see "Dell™

Quickset" in your User’s Guide.

• How to reinstall my operating system

Operating System CD

NOTE: The Operating System CD may be optional and may

not ship with your computer.

The operating system is already installed on your computer.

To reinstall your operating system, use the optional

Operating System CD (see "Using the Operating System

CD" in your User’s Guide).

After you reinstall your

operating system, use the

Drivers and Utilities CD

(ResourceCD) to reinstall

drivers for the devices that

came with your computer.

NOTE: The color of your CD

varies based on the

operating system you

ordered.

What Are You Looking For? Find It Here

8 Quick Reference Guide

Setting Up Your Computer

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product

Information Guide.

1

Unpack the accessories box.

2

Set aside the contents of the accessories box, which you will need to complete the setup of your

computer.

The accessories box also contains user documentation and any software or additional hardware (such

as PC Cards, drives, or batteries) that you have ordered.

3

Connect the AC adapter to the AC adapter connector on the computer and to the electrical outlet.

4

Open the computer display and press the power button to turn on the computer (see "Front View" on

page 9).

NOTE: It is recommended that you turn on and shut down your computer at least once before you install any cards

or connect the computer to a docking device or other external device, such as a printer.

Quick Reference Guide 9

About Your Computer

Front View

1 display latch release 2 display latches (2) 3 display

4 keyboard status lights 5 touch pad 6 touch pad buttons (2)

7 speakers (2) 8 device status lights 9 keyboard

10 power button

1

9

2

8

3

7

10

4

5

6

10 Quick Reference Guide

Left Side View

Right Side View

Back View

1 modem connector 2 network connector 3 video connector

4 USB connectors (3) 5 microphone connector 6 headphone connector

7 ExpressCard slot 8 ExpressCard slot release

button

1 optical drive bay 2 optical-drive-tray eject button 3 security cable slot

1 AC adapter connector 2 air vent

453 7 81 2 6

3

2

1

21

Quick Reference Guide 11

Bottom View

Using a Battery

Battery Performance

NOTE: For information about the Dell warranty for your computer, see the Product Information Guide or separate

paper warranty document that shipped with your computer.

For optimal computer performance and to help preserve BIOS settings, operate your Dell™ portable

computer with the main battery installed at all times. One battery is supplied as standard equipment in

the battery bay.

NOTE: Because the battery may not be fully charged, use the AC adapter to connect your new computer to an

electrical outlet the first time you use the computer. For best results, operate the computer with the AC adapter

until the battery is fully charged. To view battery charge status, click Start

→

Control Panel→ Power Options

→

Power Meter.

1 memory module/Mini PCI

cover

2 optical-drive locking screw 3 hard drive

4 battery 5 battery-bay latch lock 6 battery-bay latch release

7 processor and thermal module

cover

8 fan

4

3

5

12

7

8

6

12 Quick Reference Guide

NOTE: Battery operating time (the time the battery can hold a charge) decreases over time. Depending on how

often the battery is used and the conditions under which it is used, you may need to purchase a new battery during

the life of your computer.

NOTE: It is recommended that you connect your computer to an electrical outlet when writing to a CD or DVD.

Battery operating time varies depending on operating conditions. Operating time is significantly reduced

when you perform operations including, but not limited to, the following:

• Using optical drives

• Using wireless communications devices, PC Cards, ExpressCards, media memory cards, or USB

devices

• Using high-brightness display settings, 3D screen savers, or other power-intensive programs such as 3D

games

• Running the computer in maximum performance mode. See "Configuring Power Management

Settings" on page 14 for information about accessing Windows Power Options Properties or Dell

QuickSet, which you can use to configure power management settings.

CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only

with a compatible battery purchased from Dell. The battery is designed to work with your Dell computer. Do not

use a battery from other computers with your computer.

CAUTION: Do not dispose of batteries with household waste. When your battery no longer holds a charge, call

your local waste disposal or environmental agency for advice on disposing of a lithium-ion battery. See "Battery

Disposal" in the Product Information Guide.

CAUTION: Misuse of the battery may increase the risk of fire or chemical burn. Do not puncture, incinerate,

disassemble, or expose the battery to temperatures above 65°C (149°F). Keep the battery away from children.

Handle damaged or leaking batteries with extreme care. Damaged batteries may leak and cause personal injury

or equipment damage.

Checking the Battery Charge

The Dell QuickSet Battery Meter, the Microsoft Windows Power Meter window and icon, and the

low-battery warning provide information on the battery charge.

Dell™ QuickSet Battery Meter

If Dell QuickSet is installed, press <Fn><F3> to display the QuickSet Battery Meter. The Battery

Meter displays status, battery health, charge level, and charge completion time for the battery in your

computer.

For more information about QuickSet, right-click the icon in the taskbar, and click Help.

Microsoft

®

Windows

®

Power Meter

The Windows Power Meter indicates the remaining battery charge. To check the Power Meter, double-

click the icon on the taskbar.

If the computer is connected to an electrical outlet, a icon appears.

Quick Reference Guide 13

Low-Battery Warning

NOTICE: To avoid losing or corrupting data, save your work immediately after a low-battery warning. Then

connect the computer to an electrical outlet. If the battery runs completely out of power, hibernate mode begins

automatically.

A pop-up window warns you when the battery charge is approximately 90 percent depleted. The

computer enters hibernate mode when the battery charge is at a critically low level.

You can change the settings for the battery alarms in QuickSet or the Power Options Properties window.

See "Configuring Power Management Settings" on page 14 for information about accessing QuickSet or

the Power Options Properties window.

Conserving Battery Power

Perform the following actions to conserve battery power:

• Connect the computer to an electrical outlet when possible because battery life is largely determined

by the number of times the battery is used and recharged.

• Place the computer in standby mode or hibernate mode when you leave the computer unattended for

long periods of time (see "Power Management Modes" on page 13).

• Use the Power Management Wizard or the

Power Options Properties

window to select options to

optimize your computer’s power usage. These options can also be set to change when you press the

power button, close the display, or press <Fn><Esc>.

NOTE: See "Configuring Power Management Settings" on page 14 for information on conserving battery power.

Power Management Modes

Standby Mode

Standby mode conserves power by turning off the display and the hard drive after a predetermined

period of inactivity (a time-out). When the computer exits standby mode, it returns to the same

operating state it was in before entering standby mode.

NOTICE: If your computer loses AC and battery power while in standby mode, it may lose data.

To enter standby mode:

• Click

Start

→

Shut Down

→

Stand by

.

or

• Depending on how you set the power management options in the

Power Options Properties

window

or the QuickSet Power Management Wizard, use one of the following methods:

– Press the power button.

– Close the display.

– Press <Fn><Esc>.

14 Quick Reference Guide

To exit standby mode, press the power button or open the display, depending on how you set the power

management options. You cannot make the computer exit standby mode by pressing a key or touching

the touch pad.

Hibernate Mode

Hibernate mode conserves power by copying system data to a reserved area on the hard drive and then

completely turning off the computer. When the computer exits hibernate mode, it returns to the same

operating state it was in before entering hibernate mode.

NOTICE: You cannot remove devices or undock your computer while your computer is in hibernate mode.

Your computer enters hibernate mode if the battery charge level becomes critically low.

To manually enter hibernate mode:

•

C

lick

Start

→

Shut Down

→

Hibernate

.

or

• Depending on how you set the power management options in the

Power Options Properties

window

or the QuickSet Power Management Wizard, use one of the following methods to enter hibernate

mode:

– Press the power button.

– Close the display.

– Press <Fn><Esc>.

NOTE: Some PC Cards or ExpressCards may not operate correctly after the computer exits hibernate mode.

Remove and reinsert the card (see "Removing a Card or Blank in your User’s Guide), or simply restart (reboot) your

computer.

To exit hibernate mode, press the power button. The computer may take a short time to exit hibernate

mode. You cannot make the computer exit hibernate mode by pressing a key or touching the touch pad.

For more information on hibernate mode, see the documentation that came with your operating system.

Configuring Power Management Settings

You can use the QuickSet Power Management Wizard or Windows Power Options Properties to

configure the power management settings on your computer.

• For more information about QuickSet, right-click the icon in the taskbar and click

Help

.

• To access the

Power Options Properties

window, click

Start

→

Control Panel

→

Power Options

. For

information on any field in the

Power Options Properties

window, click the question mark icon on the

title bar and then click on the area where you need information.

Quick Reference Guide 15

Charging the Battery

NOTE: When the computer is turned off, the AC adapter charges a completely discharged battery to 80 percent in

about 1 hour and to 100 percent in approximately 2 hours. Charge time is longer with the computer turned on. You

can leave the battery in the computer for as long as you like. The battery’s internal circuitry prevents the battery

from overcharging.

When you connect the computer to an electrical outlet or install a battery while the computer is

connected to an electrical outlet, the computer checks the battery charge and temperature. If necessary,

the AC adapter then charges the battery and maintains the battery charge.

If the battery is hot from being used in your computer or being in a hot environment, the battery may

not charge when you connect the computer to an electrical outlet.

The battery is too hot to start charging if the light flashes alternately green and orange. Disconnect

the computer from the electrical outlet and allow the computer and the battery to cool to room

temperature. Then connect the computer to an electrical outlet to continue charging the battery.

For more information about resolving problems with a battery, see "Power Problems" in your User’s

Guide.

Replacing the Battery

CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery only

with a compatible battery purchased from Dell. The battery is designed to work with your Dell™ computer. Do not

use a battery from other computers with your computer.

CAUTION: Before performing these procedures, turn off the computer, disconnect the AC adapter from the

electrical outlet and the computer, disconnect the modem from the wall connector and computer, and remove any

other external cables from the computer.

NOTICE: You must remove all external cables from the computer to avoid possible connector damage.

16 Quick Reference Guide

To remove the battery:

1

If the computer is connected to a docking device (docked), undock it. See the documentation that

came with your docking device for instructions.

2

Ensure that the computer is turned off.

3

Slide the battery-bay latch lock on the bottom of the computer away from the battery.

4

Slide and hold the battery-bay latch release, and then remove the battery from the bay.

To replace the battery, follow the removal procedure in reverse order.

Storing a Battery

Remove the battery when you store your computer for an extended period of time. A battery discharges

during prolonged storage. After a long storage period, recharge the battery (see "Charging the Battery" on

page 15) fully before you use it.

Troubleshooting

Lockups and Software Problems

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product

Information Guide.

1 battery 2 battery-bay latch release 3 battery-bay latch lock

2

1

3

Quick Reference Guide 17

The computer does not start up

ENSURE THAT THE AC ADAPTER IS FIRMLY CONNECTED TO THE COMPUTER AND TO THE ELECTRICAL OUTLET.

The computer stops responding

NOTICE: You might lose data if you are unable to perform an operating system shutdown.

T

URN THE COMPUTER OFF — If you are unable to get a response by pressing a key on your keyboard or

moving your mouse, press and hold the power button for at least 8 to 10 seconds until the computer

turns off. Then restart your computer.

A program stops responding or crashes repeatedly

NOTE: Software usually includes installation instructions in its documentation or on a floppy disk or CD.

E

ND THE PROGRAM —

1

Press <Ctrl><Shift><Esc> simultaneously and click

Task Manager

.

2

Click the program that is no longer responding and click

End Task

.

CHECK THE SOFTWARE DOCUMENTATION — If necessary, uninstall and then reinstall the program.

A program is designed for an earlier Microsoft

®

Windows

®

operating system

RUN THE PROGRAM COMPATIBILITY WIZARD — The Program Compatibility Wizard configures a program

so it runs in an environment similar to non-Windows XP operating system environments.

1

Click

Start

→

All Programs

→

Accessories

→

Program Compatibility Wizard

.

2

Click

A solid blue screen appears

TURN THE COMPUTER OFF — If you are unable to get a response by pressing a key on your keyboard or

moving your mouse, press and hold the power button for at least 8 to 10 seconds until the computer

turns off. Then restart your computer.

Other software problems

CHECK THE SOFTWARE DOCUMENTATION OR CONTACT THE SOFTWARE MANUFACTURER FOR TROUBLESHOOTING

INFORMATION —

• Ensure that the program is compatible with the operating system installed on your computer.

• Ensure that your computer meets the minimum hardware requirements needed to run the software.

See the software documentation for information.

• Ensure that the program is installed and configured properly.

• Verify that the device drivers do not conflict with the program.

• If necessary, uninstall and then reinstall the program.

18 Quick Reference Guide

BACK UP YOUR FILES IMMEDIATELY.

U

SE A VIRUS-SCANNING PROGRAM TO CHECK THE HARD DRIVE, FLOPPY DISKS, OR CDS .

S

AVE AND CLOSE ANY OPEN FILES OR PROGRAMS AND SHUT DOWN YOUR COMPUTER THROUGH THE START

MENU.

S

CAN THE COMPUTER FOR SPYWARE — If you are experiencing slow computer performance, you frequently

receive pop-up advertisements, or you are having problems connecting to the Internet, your computer

might be infected with spyware. Use an anti-virus program that includes anti-spyware protection (your

program may require an upgrade) to scan the computer and remove spyware. For more information, go to

support.dell.com and search for the keyword spyware.

RUN THE DELL DIAGNOSTICS — See "Dell Diagnostics" on page 18. If all tests run successfully, the error

condition is related to a software problem.

Dell Diagnostics

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product

Information Guide.

When to Use the Dell Diagnostics

If you experience a problem with your computer, perform the checks in "Lockups and Software

Problems" on page 16 and run the Dell Diagnostics before you contact Dell for technical assistance.

It is recommended that you print these procedures before you begin.

NOTICE: The Dell Diagnostics works only on Dell™ computers.

NOTE: The Drivers and Utilities CD is optional and may not ship with your computer.

Start the Dell Diagnostics from either your hard drive or from the Drivers and Utilities CD (also known

as the ResourceCD).

Starting the Dell Diagnostics From Your Hard Drive

The Dell Diagnostics is located on a hidden diagnostic utility partition on your hard drive.

NOTE: If your computer cannot display a screen image, contact Dell (see "Contacting Dell" in your User’s Guide).

1

Shut down the computer.

2

If the computer is connected to a docking device (docked), undock it. See the documentation that

came with your docking device for instructions.

3

Connect the computer to an electrical outlet.

4

Diagnostics can be invoked one of two ways:

a

Turn on the computer. When the DELL™ logo appears, press <F12> immediately. Select

Diagnostics from the boot menu and press <Enter>.

NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the

Microsoft

®

Windows

®

desktop. Then shut down your computer and try again.

Quick Reference Guide 19

b

Press and hold the <Fn> key while starting the computer.

NOTE: If you see a message stating that no diagnostics utility partition has been found, run the Dell

Diagnostics from the Drivers and Utilities CD.

The computer runs the Pre-boot System Assessment, a series of initial tests of your system board,

keyboard, hard drive, and display.

• During the assessment, answer any questions that appear.

• If a failure is detected, the computer stops and beeps. To stop the assessment and restart the

computer, press <Esc>; to continue to the next test, press <y>; to retest the component that

failed, press <r>.

• If failures are detected during the Pre-boot System Assessment, write down the error code(s) and

contact Dell (see "Contacting Dell" in your

User’s Guide

).

If the Pre-boot System Assessment completes successfully, you receive the message

Booting Dell

Diagnostic Utility Partition. Press any key to continue

.

5

Press any key to start the Dell Diagnostics from the diagnostics utility partition on your hard drive.

Starting the Dell Diagnostics From the Drivers and Utilities CD

1

Insert the

Drivers and Utilities

CD.

2

Shut down and restart the computer.

When the DELL logo appears, press <F12> immediately.

If you wait too long and the Windows logo appears, continue to wait until you see the Windows

desktop. Then shut down your computer and try again.

NOTE: The next steps change the boot sequence for one time only. On the next start-up, the computer boots

according to the devices specified in the system setup program.

3

When the boot device list appears, highlight

CD/DVD/CD-RW Drive

and press <Enter>.

4

Select the

Boot from CD-ROM

option from the menu that appears and press <Enter>.

5

Ty p e

1

to start the menu and press <Enter> to proceed.

6

Select

Run the 32 Bit Dell Diagnostics

from the numbered list. If multiple versions are listed, select

the version appropriate for your computer.

7

When the Dell Diagnostics

Main Menu

appears, select the test you want to run.

20 Quick Reference Guide

Dell Diagnostics Main Menu

1

After the Dell Diagnostics loads and the

Main

Menu

screen appears, click the button for the option

you want.

2

If a problem is encountered during a test, a message appears with an error code and a description of the

problem. Write down the error code and problem description and follow the instructions on the

screen.

If you cannot resolve the error condition, contact Dell (see "Contacting Dell" in your

User’s Guide

).

NOTE: The Service Tag for your computer is located at the top of each test screen. If you contact Dell,

technical support will ask for your Service Tag.

3

If you run a test from the

Custom Test

or

Symptom Tree

option, click the applicable tab described in

the following table for more information.

Option Function

Express Test Performs a quick test of devices. This test typically takes

10 to 20 minutes and requires no interaction on your

part. Run Express Test first to increase the possibility of

tracing the problem quickly.

Extended Test Performs a thorough check of devices. This test typically

takes 1 hour or more and requires you to answer

questions periodically.

Custom Test Tests a specific device. You can customize the tests you

want to run.

Symptom Tree Lists the most common symptoms encountered and

allows you to select a test based on the symptom of the

problem you are having.

Tab Function

Results Displays the results of the test and any error conditions

encountered.

Errors Displays error conditions encountered, error codes, and

the problem description.

Help Describes the test and may indicate requirements for

running the test.

Strona jest ładowana ...

Dell Latitude 120L Skrócona instrukcja obsługi

Dell Latitude 120L Skrócona instrukcja obsługi

w innych językach

Powiązane dokumenty