Sony TDM-NC1 Instrukcja obsługi

Operating Instructions Mode d’emploi Manual de instrucciones

Bedienungsanleitung Gebruiksaanwijzing Istruzioni per l’uso

Bruksanvisning Instrukcja obsługi Brugsanvisning

Käyttöohjeet Instruções de operação

Wireless Network Audio Adapter

3-198-676-12(1)

TDM-NC1

2

GB

This product is to be used indoor only.

Do not install the appliance in a confined space, such

as a bookcase or built-in cabinet.

The nameplate is located on the bottom exterior.

CAUTION

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type

recommended by the manufacturer. Discard used

batteries according to the manufacturer’s instructions.

Don’t throw away the battery with

general house waste, dispose of it

correctly as chemical waste.

Batteries or batteries installed apparatus shall not be

exposed to excessive heat such as sunshine, fire or the

like.

Notice for the customers in Europe

Hereby, Sony Corporation, declares that this TDM-

NC1 Wireless Network Audio Adapter is in

compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC. For

details, please access to the following URL:

http://www.compliance.sony.de/

This product is intended to be used in the following

countries;

United Kingdom, Republic of Ireland, Federal

Republic of Germany, Republic of Poland, Republic of

Hungary, Czech Republic, Slovak Republic, Republic

of Italy, Kingdom of Sweden, Kingdom of Denmark,

Republic of Finland, Kingdom of Norway, Republic of

Lithuania, Republic of Latvia, Republic of Estonia,

Kingdom of the Netherlands, Spain, Hellenic

Republic, Romania, Republic of Slovenia, French

Republic, Kingdom of Belgium, Republic of Portugal,

Swiss Confederation, Republic of Austria, Republic of

Turkey

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the European

Union and other European

countries with separate

collection systems)

This symbol on the product or on its packaging

indicates that this product shall not be treated as

household waste. Instead it shall be handed over to the

applicable collection point for the recycling of

electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent

potential negative consequences for the environment

and human health, which could otherwise be caused by

inappropriate waste handling of this product. The

recycling of materials will help to conserve natural

resources. For more detailed information about

recycling of this product, please contact your local

Civic Office, your household waste disposal service or

the shop where you purchased the product.

The manufacturer of this product is Sony Corporation,

1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. The

Authorized Representative for EMC and product

safety is Sony Deutschland GmbH, Hedelfinger

Strasse 61, 70327 Stuttgart, Germany. For any service

or guarantee matters please refer to the addresses given

in separate service or guarantee documents.

Notice for the customers in the U.S.A.

Owner’s Record

The model and serial numbers are located on the

bottom of the unit. Record the serial number in the

space provided below. Refer to them whenever you

call upon your Sony dealer regarding this product.

Model No. TDM-NC1

Serial No. ______________

This transmitter must not be co-located or operated in

conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure

limits set forth for uncontrolled equipment and meets

the FCC radio frequency (RF) Exposure Guidelines in

Supplement C to OET65. This equipment should be

installed and operated with at least 20cm and more

between the radiator and person’s body (excluding

extremities: hands, wrists, feet and ankles).

WARNING

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

WARNING

3

GB

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and

receiver.

– Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV

technician for help.

CAUTION

You are cautioned that any changes or modifications

not expressly approved in this manual could void your

authority to operate this equipment.

FCC RECOMMEND

The shielded interface cable recommended in this

manual must be used with this equipment in order to

comply with the limits for a digital device pursuant to

Subpart B of Part 15 of FCC Rules.

If you have any questions about this product, you may

call;

Sony Customer Information Services Center

1-800-222-7669 or http://www.sony.com/

The Number below is for the FCC related matters only.

Regulatory Information

Notice for the customers in Canada

This class B digital apparatus complies with Canadian

ICES-003.

This device complies with RSS-Gen of IC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause interference, and (2) this

device must accept any interference, including

interference that may cause undesired operation of this

device.

This equipment complies with IC radiation exposure

limits set forth for uncontrolled equipment and meets

RSS-102 of the IC radio frequency (RF) Exposure

rules. This equipment should be installed and operated

with at least 20cm and more between the radiator and

person’s body (excluding extremities: hands, wrists,

feet and ankles).

On Copyrights

• M-crew Server and the M-crew Server logo are

trademarks or registered trademarks of Sony

Corporation.

• Microsoft, Windows, Windows Vista and Windows

Media are trademarks or registered trademarks of

Microsoft Corporation in the United States and/or

other countries.

• All other trademarks and registered trademarks are

trademarks or registered trademarks of their

respective holders. In this manual, TM and ® marks

are not specified.

• Adobe, the Adobe logo, and Reader are either

registered trademarks or trademarks of Adobe

Systems Incorporated in the United States and/or

other countries.

Declaration of Conformity

Trade Name: SONY

Model No.: TDM-NC1

Responsible Party: Sony Electronics Inc.

Address:

16530 Via Esprillo,

San Diego, CA 92127 U.S.A.

Telephone No.: 858-942-2230

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two

conditions.:

(1) This device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

For the state of California, USA only

Perchlorate Material - special handling may apply,

see www.dtsc.ca.gov/hazardouswaste/perchlorate

Perchlorate Material: Lithium battery contains

perchlorate

4

GB

About TDM-NC1 manual....................... 5

Overview ................................................ 6

Getting Started

STEP 1: Checking supplied items...... 10

STEP 2: Installing the supplied M-crew

Server Ver. 2.5 software................. 10

STEP 3: Making the AUTO LINK

FOLDER Settings .......................... 12

STEP 4: Making the Windows Firewall

Settings........................................... 13

STEP 5: Making the Security Software

Firewall Settings............................. 13

STEP 6: Installing the TDM-NC1...... 14

STEP 7: Connecting the TDM-NC1 to

the network..................................... 16

STEP 8: Checking the Operation ....... 20

Listening to Music

Registering tracks to the M-crew Server

Ver. 2.5........................................... 22

Listening to music stored on your

computer......................................... 22

— MUSIC SURFIN’

Listening to music in a playlist............. 24

— PLAYLIST

Listening to music in a favorite

playlist............................................ 25

— FAVORITE PLAYLIST

Registration/FAVORITE

PLAYLIST Play

Listening to the same music in different

rooms.............................................. 26

— PARTY MODE

Viewing information in the display...... 27

Listening to Web Radio

Listening to web radio using M-crew

Server Ver. 2.5 ............................... 28

— WEB RADIO

Operating the Unit by the

Connected AV System

Operating the unit by the AV system’s

buttons and remote......................... 29

Operating by the on-screen display.......29

Advanced Network Settings

Using the network menu .......................31

Selecting another server........................31

Making network settings manually.......32

Restarting the network unit...................32

Naming the unit

(My Name function) .......................32

Registering the TDM-NC1 on your

computer manually .........................33

Checking network settings....................33

Troubleshooting

Problems and remedies .........................34

Messages ...............................................35

Additional Information

Explanation of wireless setup windows 37

Glossary ................................................40

Precautions............................................41

Specifications........................................41

List of button locations and reference

pages ...............................................42

Table of Contents

Check the following website for TDM-NC1’s

latest information, FAQ (Frequently Asked

Questions), and firmware updates;

USA:

http://esupport.sony.com/?ref=http%3A//

www.sony.com/index.php

Canada:

http://www.sony.ca/sonyca/view/english/

warranty/consumer_support.shtml

Europe:

http://support.sony-europe.com/main/

main.asp?l=en

5

GB

TDM-NC1 contains the following manuals.

Refer to them as required by the operation.

TDM-NC1 Quick Setup Guide

This guide explains how to install M-crew

Server and setup the TDM-NC1.

TDM-NC1 Operating Instructions

(this manual)

This manual is included on the supplied CD-

ROM.

It explains the operations of the TDM-NC1

itself.

This manual mainly explains operations using

the remote.

“M-crew Server Ver. 2.5”

Installation Instructions

This Installation Instructions is included on the

supplied CD-ROM.

It explains how to install the supplied “M-crew

Server Ver. 2.5” software on your computer.

“M-crew Server Ver. 2.5” Help

This help manual can be used only after the “M-

crew Server Ver. 2.5” software is installed.

It explains the operations of the “M-crew Server

Ver. 2.5” software which is included on the

same CD-ROM.

About TDM-NC1 manual

6

GB

Enjoying music stored on your computer

You can enjoy the following functions by connecting the TDM-NC1 and an AV system with DIGITAL

MEDIA PORT interface (Sony DAV series, etc.).

• You can listen to music stored on your computer by operating the unit.

• You can use MUSIC SURFIN’ to easily enjoy tracks registered to M-crew Server* (page 22).

• You can register the current track to your favorite playlist and play tracks using quick and easy

remote operations (page 24).

• For the computers with internet connections, you can also enjoy listening to web radio (page 28).

• If you have more than one TDM-NC1/CPF-IX001, you can enjoy listening to the same music in

different rooms (PARTY MODE, page 26).

• You can control the unit with an AV system’s remote and the buttons on the system for basic

operations (play, stop, etc.) (page 23).

• You can select music from the TV connected to an AV system (On-screen display function,

page 29).

* M-crew Server software is a computer application for enjoying music files stored on a computer

using the unit.

Overview

Internet

TDM-NC1

7

GB

Note

If you perform an operation (recording, file importing, using other applications, etc.) that places a load on the server

computer while playing back a track registered to the server computer, the sound may skip. In addition, the sound

may also skip depending on the network status.

Connecting the unit to the network

You can connect the unit to your computer using the Ethernet port of your computer, a router with a

built-in network switch, a network switching device, or wireless LAN router.

The connection method may vary depending on your network. Connection with a personal computer is

described here as an example.

Required equipment and accessories (not supplied)

• Personal computer* (Windows Vista Ultimate, Windows Vista Business, Windows Vista Home

Premium, Windows Vista Home Basic, Windows XP Home Edition (SP2 or higher), Windows XP

Professional (SP2 or higher), Windows XP Media Center Edition 2004 (SP2 or higher), Windows

XP Media Center Edition 2005 (SP2 or higher)). For further required specification details, refer to

the M-crew Server Installation Instructions.

• Wireless access point (For wireless connection. Compatible with IEEE 802.11g/b. TDM-NC1

cannot use a wireless ad-hoc network.)

• Ethernet cable (For wired connection. TDM-NC1 is compatible with cross cable and straight cable.)

• AV system with DIGITAL MEDIA PORT interface (Sony DAV series, etc.)

* TDM-NC1 is not compatible with Microsoft Windows 3.1, Windows 95, Windows 98, Windows

Me, Windows NT, Windows 2000 Professional, Windows XP (prior to SP2), Windows Vista Starter

Edition or Windows Vista Enterprise.

8

GB

Wired connection

Example: DSL or cable modem equipped with a built-in router (without

network switch ports)

Internet

DSL or cable

modem with a

built-in router*

Hub

Network cable

(not supplied)

To LAN port

TDM-NC1

CPF-IX001 Computer

* Connections may vary depending on your network.

AV system

(DAV, etc.)

9

GB

Wireless connection

Example: Wireless LAN router and DSL or cable modem

Internet

DSL or cable modem with a

built-in wireless LAN router

and wireless access point*

* Connections may vary depending on your network.

If your modem does not have a wireless function, you need a wireless access point.

TDM-NC1

CPF-IX001 Computer

AV system

(DAV, etc.)

10

GB

The setup procedure is below.

Check the Supplied Items

(STEP

1)

m

Install M-crew Server

(STEP

2 – 3)

m

Make the Windows Firewall Settings

(STEP

4)

m

Make the Software Firewall Settings

(STEP

5)

m

Set up TDM-NC1

(STEP

6 – 7)

m

Check the Operations

(STEP

8)

You must first install the supplied M-crew

Server Ver. 2.5 software on your computer.

For details on the installation, refer to the

“M-crew Server Ver. 2.5” Installation

Instructions contained on the supplied CD-

ROM.

Installation may take some time depending on

the environment. A progress bar is displayed

while installation is underway. Wait until the

installation is finished.

Note for NAS-CZ1/CPF-IX001 users

Install M-crew Server Ver. 2.5 without uninstalling

M-crew Server Ver. 1.0 or 2.0. The contents

information can be used even after installing M-crew

Server Ver. 2.5.

1 Turn on your computer and login as an

administrator.

Wait for Windows to load.

2 Insert the supplied CD-ROM into the

CD-ROM drive of your computer.

Getting Started

STEP 1: Checking

supplied items

Unit

Remote (RM-ANU010) with battery

TDM-NC1 Operating Instructions/M-crew Server Ver.

2.5 software CD-ROM

Quick Setup Guide

STEP 2: Installing the

supplied M-crew Server

Ver. 2.5 software

M-crew Server

Ver. 2.5 software

CD-ROM

11

GB

The “M-crew Server SETUP” window will

appear.

1)

Click to display the M-crew Server Installation

Instructions.

2)

Click to start up the WLAN Setup Assistant.

3)

Click to display the TDM-NC1 Operating

Instructions (this manual).

Notes

• If the window does not open, double-click the

CD-ROM Setup.exe icon.

• When the installation is still in progress, do not

interrupt the operation or take CD-ROM out of

the CD-ROM drive. Doing so may render it

impossible to install the software thereafter.

The “Auto Play”

window appears, click [Run

setup.exe] to install the program. Then, the “User

Account Control” (UAC) window appears, click

[Allow]. If you click [Cancel], you will not be

able to start the installation.

3 Select the language to be used.

4 Click [M-crew Server setup].

The installation starts. Follow the on-screen

instructions.

Notes

• If “.NET Framework” (2.0 or higher) is not

installed on your computer, the “.NET

Framework Installer” window appears. Click

[Install] to install “.NET Framework 2.0” and

follow the displayed instructions.

• A warning window may appear during

installation of Windows Media Format SDK

9.5.

To continue installing, click [OK]. For details,

refer to the M-crew Server Installation

Instructions “Installing M-crew Server”.

5 After the installation is completed,

click [Reboot] to restart your computer.

After restarting your computer, the “AUTO

LINK FOLDER SETUP” window appears

automatically.

For Windows Vista users

3

4

1)

2)

3)

12

GB

When the AUTO LINK FOLDER settings are

completed, all supportable music files in the

folder and the sub folder that exist on the path

indicated in the window are automatically

imported to M-crew Server.

If many songs are stored on your computer,

loading time may take longer.

Note

If the “AUTO LINK FOLDER SETUP” window does

not automatically appear after rebooting, click [Start] –

[All Programs] – [M-crew Server] – [TOOLS] –

[AUTO LINK] in that order. In this case, [Next] and

[Skip] become [OK] and [Cancel].

1 Click to place a check next to the

directory path that contains the files to

be loaded.

Click again to remove checks next to paths

that are not to be loaded.

Tip

Sub-folders of the selected folder are also subject

to the AUTO LINK function.

2 Click [Next].

The music files located in the checked

directory path(s) are loaded automatically.

The “User Account Control” (UAC) window

appears, click [Allow]. If you click [Cancel], you

will not be able to start the installation.

Note

All supportable music files that exist in the path

indicated in the window are automatically

imported to M-crew Server.

If the “Windows Security Alert”

window appears

Click [Unblock] to unblock the program.

Make sure that the “M-crew Server task tray

icon” appears in “Name”, then click [Unblock].

If you click [Keep Blocking], you will be unable

to use M-crew Server. For details, refer to

“Registering the TDM-NC1 on your computer

manually” in the M-crew Server Installation

Instructions.

In some cases, the “Windows Security Alert”

window appears in “STEP 4: Making the

Windows Firewall Settings” (page 13).

STEP 3: Making the AUTO

LINK FOLDER Settings

For Windows Vista users

13

GB

This setting opens the Windows Firewall so you

can enjoy music files stored on your computer

via the unit.

The “ICF SETTINGS” window appears.

Note

If the “ICF SETTINGS” window does not

automatically appear, click [Start] – [All Programs] –

[M-crew Server] – [TOOLS] – [ICF Settings] in that

order.

The “User Account Control” (UAC) window appears,

click [Allow]. If you click [Cancel], you will not be

able to start the installation.

1 Click [Enable].

“Enable” or “Disable” appears for each

item. If “Disable” appears, click [Enable]

repeatedly until “Enable” appears for all

status items.

2 Click [Close].

The “Security software Firewall setting

guide” window appears automatically.

If commercially available anti-virus software is

installed on your computer, this setting opens

the Firewall.

The “Security software Firewall setting guide”

window appears.

If the security software is not installed on your

computer, click [Close] then go to STEP 6.

1 Click your security software.

The web browser is activated, and the

setting guide of your security software

appears. If your security software is not on

the list, click [Other security software].

Note

To display the guide (web browser), your

computer needs to be connected to the Internet.

2 Follow the on-screen message.

Note

After installing the M-crew Server, the task

tray icon appears on the taskbar (page 36).

STEP 4: Making the

Windows Firewall

Settings

For Windows Vista users

STEP 5: Making the

Security Software

Firewall Settings

14

GB

Preparing the remote

Pull out the insulating sheet to allow power

to flow from the battery.

The remote already contains a battery.

To replace the battery in the

remote

1 Slide out and remove the battery case.

2 Insert a new lithium battery CR2025 with the

+ side facing up.

3 Slide the battery case back in.

Note

If you do not use the remote for a long period of time,

remove the battery to avoid possible damage from

battery leakage and corrosion.

Notes on lithium battery

• Keep the lithium battery out of the reach of children.

Should the battery be swallowed, immediately

consult a doctor.

• Wipe the battery with a dry cloth to assure a good

contact.

• Be sure to observe the correct polarity when

installing the battery.

• Do not hold the battery with metallic tweezers,

otherwise a short-circuit may occur.

Tip

When the remote can no longer operate the TDM-NC1,

replace the battery with a new one.

STEP 6: Installing the

TDM-NC1

A lithium battery CR2025

WARNING

Battery may explode if you mistreated.

Do not recharge, disassemble or dispose of in fire.

15

GB

Installing the TDM-NC1

Connect the DIGITAL MEDIA PORT of the unit to an AV system with DIGITAL MEDIA PORT interface (Sony

DAV series, etc.).

Connection examples

Connecting to an AV system which can output video signals when the system is

in DMPORT function

Connecting to an AV system which cannot output video signals when the

system is in DMPORT function

Connect a video cable (not supplied) to the VIDEO OUT jack of the unit. Refer to the user’s guide of

your AV system for further information.

Notes

• The unit turns on/off automatically whenever the connected AV system turns on/off.

• When connecting a video cable to a TV that has a SCART (EURO AV) jack, use a commercially available

conversion connector.

• When connecting a video cable (not supplied) to the VIDEO OUT jack of the unit, no image is output from the

DIGITAL MEDIA PORT cable of the unit.

DMPORT

AV system with DIGITAL MEDIA

PORT interface (back panel)

TDM-NC1

DIGITAL MEDIA

PORT cable

TDM-NC1

Video cable

(not supplied)

TV AV system (Sony DAV series,

STR series, etc.)

DIGITAL MEDIA

PORT cable

TDM-NC1

AV system (Sony

HT series, etc.)

TV

Video cable (not supplied)

16

GB

To connect/disconnect the unit

Connecting

1 Connect the DIGITAL MEDIA PORT cable

of this unit to the AV system with DIGITAL

MEDIA PORT interface (Sony DAV series,

etc.). Make sure the AV system is turned off

before connecting.

Note

According to your area’s TV system, switch the

NTSC/PAL selector on the bottom of the unit.

2 Turn on the AV system connected to the

unit, and switch the AV system function to

DMPORT.

Disconnecting

Before disconnecting, turn off the AV system.

Otherwise, this unit cannot backup settings

correctly.

Select your desired network setting from the

following three options.

– Wired setting , select Case A.

– Wireless setting (but the unit is not installed

near computer) , select Case B.

Note

You can set up the wireless setting by starting your

computer web browser. See Case C (page 18). Also, if

your wireless access point settings are applied under

one of the following settings, you need to select Case

C.

– If you set wireless network key (WEP key) to other

than “WEP key No. 1”.

– If you set the access point’s SSID not to transmit

(stealth mode).

NTSC/PAL

selector

STEP 7: Connecting the

TDM-NC1 to the network

+/–

./>

ENTER

MENU

m/M

17

GB

Case A: Wired connection

1 Connect the unit to the network using a

wired connection.

Connect the unit to your router (hub) or

directly to the LAN port of the computer.

Use the network cable (not supplied).

Check that the WIRELESS/WIRED

selector on the unit is set to WIRED.

Notes

• When using the unit with a fixed IP address,

refer to “Advanced Network Settings”

(page 31).

• When connecting the unit to the computer

directly, set the IP address of computer to

“Automatic Private IP Addressing”. After

turning on the computer, “Configuring” appears

in the unit display window for a few minutes.

• In some cases, a message indicating that the

connection is limited, or not available, will

appear in the lower right portion of the

computer; however, the unit will operate

normally.

2 Turn on the AV system, and set the AV

system’s function to DMPORT.

3 Go to STEP 8 (page 20).

Case B: Wireless connection

(setting up by the unit)

1 Set the WIRELESS/WIRED selector on

the unit to WIRELESS.

2 Turn on the AV system, and set the AV

system’s function to DMPORT.

3 Confirm the settings of your wireless

system.

Check the following items of your wireless

LAN router to set the same information for

the TDM-NC1.

SSID (Wireless Network Name):

________________________________________

If your wireless LAN router security is

enabled,

Wireless Network Key:

__________________

Tips

• For details on how to check the wireless LAN

router settings, refer to the operation manual of

your wireless LAN router.

• In some case, SSID name and wireless network

key numbers/characters are often written on the

wireless LAN router.

• Check that your wireless LAN router uses the

latest firmware version. For details, refer to the

operation manual of your wireless LAN router.

4 Press MENU.

5 Press . or > repeatedly until “Wi-

Fi SETUP?” appears in the unit display

window, then press ENTER.

“SSID?” appears.

6 Press ENTER.

“Searching” appears.

7 Press . or > repeatedly until your

wireless LAN router SSID name

appears, then press ENTER.

If you set the wireless network key in the

wireless LAN setting, “KEY?” appears.

Press ENTER.

If you do not set the wireless network key,

the unit restarts, go to STEP 8 (page 20).

WIRELESS

WIRED

Network cable

(not supplied)

To router (hub)

or LAN port of

the computer

To LAN port

WIRELESS/

WIRED selector

18

GB

8 Enter the wireless network key

numbers/characters.

Use . / > to choose the character,

m / M to skip entered digits.

Also you can choose letter types using +/–.

Letter types changes as shown below:

9 Press ENTER.

The unit restarts, go to STEP 8 (page 20).

Note

If you set wireless network key (WEP key) to

other than “WEP key No. 1”, you need to select

the Case C connection (page 18).

Case C: Wireless connection

(setting up by the computer)

1 Connect the unit to the network using a

wired connection.

Connect the unit to your wireless LAN

router (hub) or directly to the LAN port of

the computer. Use the network cable (not

supplied). Check that the WIRELESS/

WIRED selector on the unit is set to

WIRED.

Notes

• When using the unit with a fixed IP address,

refer to “Advanced Network Settings”

(page 31).

• When connecting the unit to the computer

directly, set the IP address of computer to

“Automatic Private IP Addressing”. After

turning on the computer, “Configuring” appears

in the unit display window for a few minutes.

• In some cases, a message indicating that the

connection is limited, or not available, will

appear in the lower right portion of the

computer; however, the unit will operate

normally.

2 Turn on the AV system, and set the AV

system’s function to DMPORT.

3 Confirm the settings of your wireless

system.

Check the following items of your wireless

LAN router to set the same information for

the TDM-NC1.

SSID (Wireless Network Name):

________________________________________

upper case y lower case

YY

space y symbol y number

WIRELESS

WIRED

Network cable

(not supplied)

To wireless LAN

router (hub)

To LAN port

WIRELESS/

WIRED selector

19

GB

If your wireless LAN router security is

enabled,

Security mode:

_________________________

Wireless Network Key:

__________________

Wireless Network Key No. (when using

WEP):

_________________________________

Tips

• For details on how to check the wireless LAN

router settings, refer to the operation manual of

your wireless LAN router.

• In some case, SSID name and wireless network

key numbers/characters are written on the

wireless LAN router.

• Check that your wireless LAN router uses the

latest firmware version. For details, refer to the

operation manual of your wireless LAN router.

4 Press MENU.

5 Press . or > repeatedly until

“SETUP BY PC?”appears, then press

ENTER.

The IP address appears in the display.

6 Start up the “WLAN Setup Assistant”

on your computer.

Select [Start] - [All Programs] - [M-crew

Server] - [TOOLS] - [WLAN Setup

Assistant].

7 Click [Next].

Wait a moment for Internet Explorer to start

up.

Note

If the web browser (Internet Explorer) does not

start up automatically, start up the web browser

manually, and enter the IP address displayed on

the unit in the address bar of the web browser.

8 Enter the word “root” in the box

marked “User name”. Leave the box

marked “Password” blank, and click

[OK] to login.

9 Select the language.

10Click “Wireless LAN Setup” in the

Menu on your computer.

11Enter the SSID, Security mode and

wireless network key that you checked

in step 3, and click [Setup].

Tips

• When using wireless network key (WEP Key),

check that the wireless LAN router Key No. and

the above setting match.

• In most cases, only one wireless network key

(WEP Key) number is required, in which case

add this to “WEP Key No. 1”.

12Click “Restart Audio Client” in the

Menu.

13Click [Restart].

14Set the WIRELESS/WIRED selector to

WIRELESS.

Go to STEP 8 (page 20).

20

GB

1 Make sure the display message of the

unit.

The message “Configuring” appears, then

“Loading” follows and then disappears. Go

to step 4.

If “SERVER?” appears, go to step 2.

Notes

• If “Check Net” appears, check the network

settings in STEP 7. Or, the wireless signal may

be weak or out of range, move the unit closer to

the wireless access point.

• If “No Server” appears, do the following;

– Make sure the Firewall setting are correct.

– Right click the M-crew Server task tray icon

in the computer’s task tray, then select [Stop

Music Service], and right click the icon

again. Then, select [Start Music Service] to

restart the M-crew Server.

– Restart your computer.

– Execute “DataBaseClear.exe” to initialize

the database (usually located in C:\Program

Files\Mcrewserver).

– Input the wireless network key numbers/

characters again.

• If the “Configuring” or “Loading” messages do

not disappear after a few minutes, or other

messages mentioned above appear, see page 35.

2 Press ENTER.

3 Press . or > repeatedly until

“Mcrew Server v2 on XXXX (your

computer name)” appears, then press

ENTER.

4 Press N and check that music or

sample music is played.

Notes

• When playing the sample music, the unit display is

shown below.

* This icon appears when connecting the unit by

wireless connection.

• If no sound is heard, check if the connected AV

system’s volume is set to zero, or the AV system’s

function is set to other than DMPORT.

• If you have a problem, see “Troubleshooting”

(page 34).

STEP 8: Checking the

Operation

./>

ENTER

+/–

N

*

Strona się ładuje...

Sony TDM-NC1 Instrukcja obsługi

Sony TDM-NC1 Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty