Triton Systems RL2000 Series Instrukcja obsługi

TDN 07100-00086

TDM RETROFIT KIT (WIRE TRACK BRACKET - RL2000)

OVERVIEW

This upgrade is for Model RL2000 units. If you need to replace the

TDM mechanism (TDM-1XX/2XX) installed with another model type

that DOES NOT have a “Triangle-hole” pattern as the one shown at

right, you will require this bracket kit.

! Remove the two (2) T-20 torx screws shown. Mount the bracket included as shown and secure with

two (2) phillips head screws provided.

Current wire track bracket installed

TDM w/DC stepper motor TDM w/DC motor

! Connect the wire track assembly to the bracket top screw hole by placing the two (2) plastic washers

under the wire track and secure with the shoulder bolt using the flat-tip screwdriver..

OOLS

EQUIRED

02-T#T

ORX DRIVER

HILLIPS

AND FLAT TIP

SCREWDRIVERS

tiKtiforteRMDT

( )01200-00260N/P

rebmuNtraP noitpircseD

24810-11030kcarTeriW,tekcarB

09100-45020)2(renetsafTP,daehtalfspillihP,wercS

01300-45020redluohS,tloB

83000

-90320)2(citsalP,rehsaW

68000-00170ediuGedargpUtiKtiforteRMDT

ściągnij PDF