Planet GSW-1820HP Instrukcja obsługi

Kategoria
Przełączniki sieciowe
Typ
Instrukcja obsługi
16-/24-Port 10/100/1000T 802.3at PoE +
2-Port 1000X SFP Gigabit Ethernet Switch
GSW-1820HP/GSW-2620HP
User's Manual
Table of Contents
1. Package Contents ................................................................................. 5
2. Product Features .................................................................................. 6
3. ProductSpecications .......................................................................... 8
4. Hardware Introduction ........................................................................ 11
4.1 Front Panel ................................................................................. 11
4.2 LED Indicators ............................................................................. 11
4.3 Multiple Functions of DIP Switch ................................................... 12
4.4 Rear Panel .................................................................................. 14
5. Hardware Installation .......................................................................... 15
5.1 Rack Mounting ............................................................................. 15
5.2 Installing the SFP Transceiver ............................................................ 17
Customer Support .................................................................................... 18
3
Trademarks
Copyright © PLANET Technology Corp. 2024
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All other
trademarks belong to their respective owners.
Disclaimer
PLANET Technology does not warrant that the hardware will work properly in
all environments and applications, and makes no warranty and representation,
either implied or expressed, with respect to the quality, performance,
merchantability,ortnessforaparticularpurpose.
PLANET has made every eort to ensure that this User’s Manual is accurate;
PLANET disclaims liability for any inaccuracies or omissions that may have
occurred.
Information in this User’s Manual is subject to change without notice and
does not represent a commitment on the part of PLANET. PLANET assumes no
responsibilityfor anyinaccuraciesthat maybe containedin thisUsers Manual.
PLANET makes no commitment to update or keep current the information in
thisUser’sManual,andreservestherighttomakeimprovementstothisUsers
Manual and/or to the products described in this User’s Manual, at any time
without notice.
If you nd information in this manual incorrect, misleading, or incomplete, we
would appreciate your comments and suggestions.
FCC Warning
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the Instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
4
CE Mark Warning
This device is compliant with Class A of CISPR 32. In a residential environment
this equipment may cause radio interference.
Energy Saving Note of the Device
This power required device does not support Standby mode operation. For
energy saving, please remove the power cable to disconnect the device from
the power circuit. In view of saving the energy and reducing the unnecessary
power consumption, it is strongly suggested to remove the power connection
for the device if this device is not intended to be active.
WEEE Warning
To avoid the potential eects on the environment and human health
as a result of the presence of hazardous substances in electrical and
electronic equipment, end users of electrical and electronic
equipment should understand the meaning of the crossed-out
wheeled bin symbol. Do not dispose of WEEE as unsorted municipal waste and
have to collect such WEEE separately.
Revision
PLANET 16-/24-Port 10/100/1000T 802.3at PoE + 2-Port 1000X SFP Gigabit
Ethernet Switch
MODELS: GSW-1820HPv3, GSW-2620HPv5
REVISION: 5.0 (DECEMBER, 2023)
Part No: EM-GSW-1820HPv3_2620HPv5_v5.0 (Part No. 2351-AK5120-003)
5
1. Package Contents
Thank you for purchasing PLANET 16-/24-Port 10/100/1000T 802.3at PoE+
Ethernet Switch, GSW-1820HP or GSW-2620HP. “802.3at PoE+ Switch”
mentioned in this manual refers to the GSW-1820HP and GSW-2620HP.
Open the box of the 802.3at PoE+ Switch and carefully unpack it. The box
should contain the following items:
The 802.3at PoE+ Switch x 1 QR Code Sheet x 1 Power Cord x 1
Let’s get started with your PLANET product
GSW-2620HP
EN Please scan the QR code to browse our online User’s Manual or Quick
Installation Guide and follow the instructions to complete the setup.
User's Manual
DE
Bitte scannen Sie den QR Code sie werden per Browser zur
Bedienungsanleitung oder Schnellanleitung weiter geleitet. Folgen Sie den
Anweisungen um die Installation abzuschließen.
FR
Veuillez scanner le code QR pour obtenir notre Notice d’Utilisation en
ligne ou notre Guide d’Installation Rapide et suivez les instructions pour
compléter la conguration
ES
Escanee el código QR para encontrar el Manual del Usuario en línea o
la Guía de Instalación Rápida y siga las instrucciones para completar la
conguración.
IT Scansiona il codice QR per consultare online il Manuale utente o la Guida di
installazione rapida e segui le istruzioni per completare la congurazione.
PT Por favor, escaneie o QR code para navegar no Manual do Usuário ou Guia
de Instalação Rápida. Siga as instruções para completar a conguração.
PL
Zeskanuj kod QR, aby otworzyć naszą internetową instrukcję obsługi
lub instrukcję szybkiej instalacji. Postępuj zgodnie z instrukcjami, aby
zakończyć poprawną kongurację.
RU
One word modify: Отсканируйте QR-код, чтобы просмотреть наше
онлайн-руководство пользователя или руководство по быстрой
настройке, и следуйте инструкциям для завершения настройки
RO Te rugam sa scanezi codul QR, pentru a descarca User’s Manual sau Quick
Installation Guide si a urmari instructiunile necesare in nalizarea instalarii
AR
Need more help?
PLANET online FAQs:
http://www.planet.com.tw/en/support/faq
Technical Support: [email protected]
Copyright © PLANET Technology Corp. 2023.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
Part No. 2361-AK5030-001
Rack-mounting Brackets x 2 Screws x 8 Rubber Feet x 4 SFP Dust Cap x 2
If any of these pieces are missing or damaged, please contact your dealer
immediately; if possible, retain the carton including the original packing
material, and use them again to repack the product in case there is a need to
return it to us for repair.
6
2. Product Features
Physical Port
16-/24-port 10/100/1000BASE-T Gigabit RJ45 copper
2 1000BASE-X SFP slots
Power over Ethernet
Complies with IEEE 802.3af/at Power over Ethernet end-span PSE
 Upto16/24portsofIEEE802.3af/802.3atdevicespowered
Supports PoE power up to 30 watts for each PoE port with up to 250W
PoE budget.
PD alive check function
Each port supports 54V DC power to PoE powered device
Auto detects powered device (PD)
Circuit protection prevents power interference between ports
Remote power feeding up to 100m in standard mode with 250m in
extend mode
Switching
Hardware-based 10/100/1000Mbps auto-negotiation and auto MDI/MDI-X
Supports IEEE 802.3x ow control for full-duplex mode and backpressure
for half-duplex mode
Integrates address look-up engine, supporting 8K absolute MAC addresses
9K jumbo frame supports all speeds (10/100/1000Mbps)
IEEE 802.1Q VLAN transparency
Hardware-based DIP switch for Standard, VLAN and Extend mode
selection;
- VLAN mode:
For GSW-1820HP:
- Ports 1 to 14 will isolate respectively.
- Ports 1 to 14 can only communicate with ports 15~16 (uplink
ports) and SFP ports 17~18.
7
For GSW-2620HP:
- Ports 1 to 22 will isolate respectively.
- Ports 1 to 22 can only communicate with ports 23~24 (uplink
ports) and SFP ports 25~26
- Extend mode: Ports 1 to 8 have a data rate of 10Mbps; the farthest
transmission distance up to 250 meters and all ports can communicate
with each other.
The DIP switch can isolate ports to prevent broadcast storm and defend
DHCPspoong
Automatic address learning and address aging
 SupportsEnergy-EcientEthernet(EEE)function(IEEE802.3az)
Hardware
 19-inchrack-mountsize,1Uheight
LED indicators for system power, per port PoE ready and PoE activity,
speed, Link/Act
Ethernet Link Energy-saving technology
- Link down power saving
- Intelligent scale power based on cable length
8
3.ProductSpecications
Model GSW-1820HP GSW-2620HP
HardwareSpecications
10/100/1000BASE-T
Copper Ports 16 auto-MDI/MDI-X ports 24 auto-MDI/MDI-X ports
802.3af/802.3at PoE+
Injector Ports 16 24
1000BASE-X SFP Ports 2 2
DIP Switch
Selectable operation mode
Standard
VLAN
Extend
Dimensions (W x D x H) 441x207x44mm(1Uheight)
Enclosure Metal
Weight 2.35kg 2.44kg
Power Requirements 100~240V AC, 50/60Hz,
5A max.
100~240V AC, 50/60Hz,
5A max.
Power Consumption/
Dissipation Max.262watts/893BTU Max.272watts/928BTU
Thermal Fan 2
LED
System:
Power (Green)
PoEUsage80%(Green)
10/100/1000T RJ45
Interfaces
(Ports 1 to 16)
10/100/1000 LNK/ACT
(Green),PoE-in-Use
(Amber)
1000X SFP Interfaces
(Ports 17 to 18)
1000 LNK/ACT (Green)
System:
Power (Green)
PoEUsage80%(Green)
10/100/1000T RJ45
Interfaces
(Ports 1 to 24)
10/100/1000 LNK/ACT
(Green),PoE-in-Use
(Amber)
1000X SFP Interfaces
(Ports 25 to 26)
1000 LNK/ACT (Green)
9
SwitchingSpecications
Switch Architecture Store-and-Forward
Switch Fabric 36Gbps/non-blocking 52Gbps/non-blocking
Switch
Throughput@64bytes 26.8Mpps 38.7Mpps
MAC Address Table 8K entries
Jumbo Frame 9216 bytes
Flow Control IEEE802.3xpauseframeforfullduplex;back
pressure for half duplex
Power over Ethernet
PoE Standard IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type End-span: 1/2 (+),
3/6 (-)
End-span: 1/2 (+),
3/6 (-)
PoE Power Output
Per port 54V DC, 300mA. max. 15.4 watts (IEEE
802.3af)
Per port 54V DC, 600mA. max. 30 watts (IEEE
802.3at)
PD Alive Check Yes
PoE Power Budget 250 watts
Number of PDs, 7 watts 16 24
Number of PDs,
15.4 watts 16 16
Number of PDs, 30 watts 8 8
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE
Standards Compliance
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3z Gigabit SX/LX
IEEE802.3xowcontrolandbackpressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE802.3azEnergy-EcientEthernet
10
Environment
Operating Temperature: 0 ~ 50 degrees C
RelativeHumidity:5~95% (non-condensing)
Storage Temperature: -10 ~ 70 degrees C
RelativeHumidity:5~95% (non-condensing)
11
4. Hardware Introduction
4.1 Front Panel
The front panel of the 802.3at PoE+ Switch consists of 16/24 auto-sensing
10/100/1000Mbps Ethernet RJ45 ports. The LED Indicators are also located on
the front panel of the 802.3at PoE+ Switch.
1
3
5
7
9
11
13
15
16
2
4
6
8
10
12
14
17
18
LNK ACT
Standard
Extend
VLAN 17 18
GSW-1820HP
16-Port 10/100/1000T
802.3at PoE
+
2-Port 1000X SFP
Gigabit Ethernet Switch
911 13 151 3 5 7
PoE Usage 80%
PWR
12345678 91011 12 13 14 15 16 PoE-in-Use
PoE
1000BASE-X SFP
Figure 4-1: GSW-1820HP Switch Front Panel
911 13 15 17 19 21 231 3 5 7
25 26
1
3
5
7
9
11
2
4
6
8
10
12
13
15
16
14
17
19
20
18
21
23
24
22
25
26
Standard
Extend
VLAN
PoE Usage 80%
PWR
12345678 91011 12 13 14 15 16 17 18 19 20 21 22 23 24
GSW-2620HP
24-Port 10/100/1000T
802.3at PoE
+
2-Port 1000X SFP
Gigabit Ethernet Switch
1000BASE-X SFP
LNK ACT PoE PoE-in-Use
Figure 4-2: GSW-2620HP Switch Front Panel
4.2 LED Indicators
System
LED Color Function
PWR Green Lights to indicate the Switch has power.
PoE Usage
80% Green Lightstoindicatethesystemhas80%PoEpower
usage (About 200W).
Per 10/100/1000BASE-T Port
LED Color Function
LNK/ACT Green
Lights To indicate the link through that port is
successfully established at 10/100/1000Mbps.
Blinks To indicate that the switch is actively sending
or receiving data over that port.
PoE-in-Use Amber
Lights To indicate the port is providing DC in-line
power.
O To indicate the connected device is not a PoE
powered device (PD)
12
Per 1000BASE-X SFP Interface
LED Color Function
LNK/ACT Green
Lights To indicate the link through that port is
successfully established at 1000Mbps.
Blinks To indicate that the switch is actively sending or
receiving data over that port.
O To indicate that the port is link down.
4.3 Multiple Functions of DIP Switch
The front panel of the 802.3at PoE+ Switch provides one DIP switch for
Standard, VLAN and Extend mode selections. The detailed descriptions are
shown in the following table.
DIP Switch Mode Function
Standard
VLAN
Extend
This mode makes the 802.3at PoE+ Switch operate
as a general switch and all PoE ports operate at
10/100/1000Mbps auto-negotiation. All ports can
communicate with one another.
Standard
VLAN
Extend
This mode makes the 802.3at PoE+ Switch operate as a
VLAN isolation switch and
For GSW-1820HP:
1. Ports 1 to 14 will isolate respectively.
2. Ports 1 to 14 can only communicate with ports 15~16
(uplink ports) and SFP ports 17~18.
For GSW-2620HP:
1. Prts 1 to 22 will isolate respectively.
2. Ports 1 to 22 can only communicate with ports 23~24
(uplink ports) and SFP ports 25~26.
Standard
VLAN
Extend
TThis mode makes the 802.3at PoE+ Switch operate as
a Long Reach PoE switch and
1. Ports 1 to 8 support farthest transmission distance of
up to 250 meters
2. Ports 1 to 8 have a data rate of 10Mbps
3. All ports can communicate with one another.
13
Please adjust the DIP switch before powering on the 802.3at
PoE+ Switch.
Standard Mode (default)
Power
100 meters (328 feet)
PoE
PoE
100BASE-T UTP with PoE
PoE IP Camera
GSW-2620HP
Standard
VLAN
Extend
PoE
100BASE-TX UTP with PoE
VLAN Isolation Mode
PC
Ports 1 to 22
Access Denied
PoE
PoE
PoE
1000BASE-T UTP
IP Camera
Ports 23~24 and Ports 25~26
to Ports 1~22 Access Permitted
NVR
GSW-2620HP
Standard
VLAN
Extend
IP Camera
IP Camera
Extend Mode
Ports 1 to 8
Power
250 meters (820 feet)
PoE
PoE
10BASE-T UTP with PoE
PoE IP Camera
GSW-2620HP
Standard
VLAN
Extend
14
4.4 Rear Panel
The rear panel of the 802.3at PoE+ Switch indicates an AC power socket,
which accepts input power from 100 to 240V AC, 50-60Hz, 5A.
50/60Hz
100-240V
, 5A max.
Figure 4-3: GSW-1820HP/GSW-2620HP Switch Rear Panel
AC Power Receptacle
The device is a power-required device, which means it will not
work till it is powered. If your networks should be active all the
time, please consider using UPS (Uninterrupted Power Supply)
for your device. It will prevent you from network data loss or
network downtime.
In some areas, installing a surge suppression device may also
help to protect your 802.3at PoE+ Switch from being damaged
by unregulated surge or current to the 802.3at PoE+ Switch or
the power adapter.
15
5. Hardware Installation
5.1 Rack Mounting
To install the 802.3at PoE+ Switch in a 19-inch standard rack, follow the
instructions described below.
Step 1: Placeyour802.3atPoE+Switchonahardatsurface,withthefront
panel positioned towards your front side.
Step 2: Attach a rack-mount bracket to each side of the 802.3at PoE+
Switch with supplied screws attached to the package. Figure 5-1
shows how to attach brackets to one side of the 802.3at PoE+
Switch.
GSW-2824P
PWR
1
2
3
4
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26
25
28
27 27 28
Standard
VLAN
Extend
24-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T +
2-Port Gigabit TP/SFP Combo Ethernet Switch
10/100
1000
LNK/ACT
LNK/ACT
PoE-in-Use
1000X SFP
1 3 5 7 9 11 13 15 17 19 21 23
2
PWR
4 6 8 10 12 14 16 18 20 22 24
25
26
GSW-2620HP
PoE-in-Use
ACTLNK1000
ACTLNK10/100
PoE-in-Use ACTLNK1000
Standard
Extend
VLAN
25
18 20 22 24
17 19 21 23
10 12 14 16
9 11 13 15
2 4 6 8
1 3 5 7
26
24-Port 10/100/1000T
802.3at PoE
+ 2-Port 1000X SFP Gigabit Ethernet Switch
Figure 5-1: Attaching the Brackets to the 802.3at PoE+ Switch.
You must use the screws supplied with the mounting brackets.
Damage caused to the parts by using incorrect screws would
invalidate the warranty.
Step 3: Secure the brackets tightly.
Step 4: Follow the same steps to attach the second bracket to the opposite
side.
16
Step 5: After the brackets are attached to the 802.3at PoE+ Switch, use
suitable screws to securely attach the brackets to the rack, as shown
in Figure 5-2.
GSW-2824P
PWR
1
2
3
4
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26
25
28
27 27 28
Standard
VLAN
Extend
24-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/1000T +
2-Port Gigabit TP/SFP Combo Ethernet Switch
10/100
1000
LNK/ACT
LNK/ACT
PoE-in-Use
1000X SFP
1 3 5 7 9 11 13 15 17 19 21 23
2
PWR
4 6 8 10 12 14 16 18 20 22 24
25
26
GSW-2620HP
PoE-in-Use
ACTLNK1000
ACTLNK10/100
PoE-in-Use ACTLNK1000
Standard
Extend
VLAN
25
18 20 22 24
17 19 21 23
10 12 14 16
9 11 13 15
2 4 6 8
1 3 5 7
26
24-Port 10/100/1000T
802.3at PoE
+ 2-Port 1000X SFP Gigabit Ethernet Switch
Figure 5-2: Mounting the 802.3at PoE+ Switch in a Rack
Step 6: Connect your 802.3at PoE+ Switch to 802.3af/802.3at complied PDs
and other network devices.
A. Connect one end of a standard network cable to the 10/100/1000BASE-T
RJ45 ports on the front panel of the 802.3at PoE+ Switch.
B. Connect the other end of the cable to the network devices such as
printer servers, workstations or routers, etc.
Step 7: Supply power to the 802.3at PoE+ Switch.
A. Connect one end of the power cable to the 802.3at PoE+ Switch.
B. Connect the power plug of the power cable to a standard wall outlet.
When the 802.3at PoE+ Switch receives power, the power LED should remain
solid Green.
17
5.2 Installing the SFP Transceiver
The sections describe how to insert an SFP transceiver into an SFP slot of the
802.3at PoE+ Switch.
The SFP transceivers are hot-pluggable and hot-swappable. You can plug in
and out the transceiver to/from any SFP port without having to power down
the 802.3at PoE+ Switch, as Figure 5-3 shows.
1 3 5 7 9 11 13 15 17 19 21 23
2
PWR
4 6 8 10 12 14 16 18 20 22 24
25
26
GSW-2620HP
PoE-in-Use
ACTLNK1000
ACTLNK10/100
PoE-in-Use ACTLNK1000
Standard
Extend
VLAN
25
18 20 22 24
17 19 21 23
10 12 14 16
9 11 13 15
2 4 6 8
1 3 5 7
26
24-Port 10/100/1000T
802.3at PoE
+ 2-Port 1000X SFP Gigabit Ethernet Switch
MGB-Series
SFP Transceiver
LC Fiber Cable
1
2
Figure 5-3: Plug In the SFP Transceiver
Approved PLANET SFP Transceivers
PLANET 802.3at PoE+ Switch supports both single mode and multi-mode SFP
transceivers. The website link of approved PLANET SFP transceivers is shown
below:
https://www.planet.com.tw/en/product/mgb-series-transceiver?c1=lan-
switches&c2=switch-accessories&c3=gigabit-transceiver
It is recommended to use PLANET SFP on the 802.3at PoE+
Switch. If you insert an SFP transceiver that is not supported,
the 802.3at PoE+ Switch will not recognize it.
1. Before we connect the 802.3at PoE+ Switch to the other network device,
we have to make sure both sides of the SFP transceivers are with the same
media type, for example, 1000BASE-SX to 1000BASE-SX; 1000BASE-LX to
1000BASE-LX.
2.Check whether the ber-optic cable type matches with the SFP transceiver
requirement.
To connect to 1000BASE-SX SFP transceiver, please use the multi-mode
bercablewithonesidebeingthemaleduplexLCconnectortype.
To connect to 1000BASE-LX SFP transceiver, please use the single-mode
bercablewithonesidebeingthemaleduplexLCconnectortype.
18
Customer Support
Thank you for purchasing PLANET products. You can browse our online FAQ
resource on PLANET Web site rst to check if it could solve your issue. If you
need more support information, please contact PLANET support team.
PLANET online FAQs:
https://www.planet.com.tw/en/support/faq
Support team mail address
Copyright © PLANET Technology Corp. 2024
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18

Planet GSW-1820HP Instrukcja obsługi

Kategoria
Przełączniki sieciowe
Typ
Instrukcja obsługi

w innych językach