Mi Xiaomi Smart Standing Fan 2 Pro Instrukcja obsługi

Smart Standing Fan 2 Pro User Manual

.1

Xiaomi Intelligenter Standventilator 2 Pro Benutzerhandbuch

.15

Manuale utente Xiaomi Smart Standing Fan 2 Pro

.29

Manuel d'utilisation de Xiaomi Smart Standing Fan 2 Pro

.43

Manual de usuario de Xiaomi Smart Standing Fan 2 Pro

.57

.127

.129

.132

.134

.136

.138

.140

.142

.144

Руководство пользователя Напольного смарт-вентилятора

Xiaomi Smart Standing Fan 2Pro

.71

Inteligentny wentylator stojący Xiaomi 2 Pro Instrukcja obsługi

.85

Xiaomi Akıllı Ayaklı Vantilatör 2 Pro Kullanım Kılavuzu

.99

.113

Xiaomi ﻦﻣ وﺮﺑ 2 ﺔﻴﻛذ ﺔــﻳدﻮﻤﻋ ﺔــﺣوﺮﻣ مﺪﺨﺘــﺴﻣ ﻞــﻴﻟد

WARRANTY NOTICE

AVISO DE GARANTÍA

ГАРАНТИЙНОЕ УВЕДОМЛЕНИЕ

GARANTIE

GARANTIEERKLÄRUNG

AVVISO SULLA GARANZIA

GWARANCJA

GARANTİ BİLDİRİMİ

نﺎﻤﻀﻟا رﺎﻌﺷإ

Safety Instructions READ AND SAVE THESE INSTRUCTIONS

Improper use may lead to electric shocks, ﬁre, personal injury, or other damage.

WARNINGS

1

This appliance can be used by children aged from 8 years and above and

persons with reduced physical, sensory or mental capabilities or lack of

experience and knowledge if they have been given supervision or instruction

concerning use of the appliance in a safe way and understand the hazards

involved. Children shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without supervision.

This appliance is not intended for use by persons (including children) with

reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Ensure that the fan is switched oﬀ from the supply mains before removing the guard.

This appliance contains baeries that are non-replaceable.

WARNING: For the purposes of recharging the baery, only use the detachable

supply unit <BLJ24W120200P-V> provided with this appliance.

Safety Instructions

2

Do not use this fan if the power cord of the charging base is damaged or its

power plug is loose.

Do not operate any fan with a damaged cord or plug. Discard fan or return to an

authorized service facility for examination and/or repair.

Do not use this fan in a place where it will easily fall over or where there are other

unstable objects nearby.

Do not excessively pinch, bend, or twist the power cord of the charging base as

this may expose or break its core.

Do not insert your ﬁngers or any object into the front grille, rear grille, or the fan

blades when the fan is in use.

Keep hair and fabrics away from the fan to avoid geing them caught in the fan.

Under normal use of condition, this equipment should be kept a separation

distance of at least 20 cm between the antenna and the body of the user.

This appliance contains built-in li-ion baery. Do not disassemble, impact, crush

the baery or throw it into ﬁre. If there is severe swelling, do not continue to use.

Do not leave the baery in high temperature environment.

1

Safety Instructions

3

Do not use any improper power outlet.

Do not use the charging base provided with this fan for any other device.

Prior to cleaning or other maintenance, the appliance must be disconnected

from the supply mains.

Do not improperly dispose of old baeries. Used baeries should be discarded

at a professional recycling facility.

Do not charge the fan on uneven places or plush materials. Otherwise, it is easy

to cause circuit failure or ﬁre due to poor contact between the charging base

and the charging port.

To avoid electric shocks, ﬁre, personal injury, or other damage, make sure the fan base is installed last. Please follow the installation instructions in the user

manual.

Do not turn on the fan or connect it to the charging base if it is not completely assembled.

Turn oﬀ or unplug the fan before installing or disassembling it. Do not touch the on/oﬀ buon to prevent the fan from running and causing danger.

Installation

Firmly hold the fan stand to avoid it from falling down and causing personal injury.

Using the Fan

Do not lean on or tilt the fan while it is running.

Do not shake the fan's head repeatedly so as to avoid damage to the internal mechanism.

Immediately stop using the fan if it makes unusual sounds, gives oﬀ bad odors, overheats, or rotates irregularly.

Charging the Fan

Do not unplug the charging base by directly pulling at the cord or wiggling it out of the outlet. Instead, pull the plug out itself.

When the baery is depleted, the fan should be charged as soon as possible. To prevent the baery from being damaged, connect the charging base to the fan

base in a timely manner.

Do not aempt to repair the charging base by yourself if it is damaged.

When the charging base is damaged or broken, it must be replaced with a genuine one purchased from the manufacturer or aer-sales service department.

When the fan is charging, the fan base may get warm. It is recommended to charge the fan on insulating materials or in places that are not easily aﬀected by

heat sources, so as to prevent the places where the fan is put from becoming discolored or deformed.

Care & Maintenance

When maintaining and cleaning the fan, make sure to remove the fan base ﬁrst before removing other parts and to install the fan base last when installing.

Make sure the fan is unplugged before removing the protective cover.

Safety Instructions

PRECAUTIONS

Transportation

4

11 12

13

Package Contents

Fan Assembly

( Front Grille + Fan Blade Assembly

+ Rear Grille)

２

Charging Base

9

Motor & Upper

Stand

１

４

Fan Base

(with Built-in Li-ion Baery)

Hex Key

７

User Manual

10

３

Lower Stand Fan Blade

Assembly Knob

Rear Grille Knob

5 6

Fan Grille Screw ×1

8

5

Read this manual carefully before use, and retain it for future reference.

Note: Illustrations of the product, accessories, and user interface in the user manual are for reference purposes only. The actual product and functions may vary

due to product enhancements.

Smart Standing Fan 2 Pro User Manual

.1

Xiaomi Intelligenter Standventilator 2 Pro Benutzerhandbuch

.15

Manuale utente Xiaomi Smart Standing Fan 2 Pro

.29

Manuel d'utilisation de Xiaomi Smart Standing Fan 2 Pro

.43

Manual de usuario de Xiaomi Smart Standing Fan 2 Pro

.57

.127

.129

.132

.134

.136

.138

.140

.142

.144

Руководство пользователя Напольного смарт-вентилятора

Xiaomi Smart Standing Fan 2Pro

.71

Inteligentny wentylator stojący Xiaomi 2 Pro Instrukcja obsługi

.85

Xiaomi Akıllı Ayaklı Vantilatör 2 Pro Kullanım Kılavuzu

.99

.113

Xiaomi ﻦﻣ وﺮﺑ 2 ﺔﻴﻛذ ﺔــﻳدﻮﻤﻋ ﺔــﺣوﺮﻣ مﺪﺨﺘــﺴﻣ ﻞــﻴﻟد

WARRANTY NOTICE

AVISO DE GARANTÍA

ГАРАНТИЙНОЕ УВЕДОМЛЕНИЕ

GARANTIE

GARANTIEERKLÄRUNG

AVVISO SULLA GARANZIA

GWARANCJA

GARANTİ BİLDİRİMİ

نﺎﻤﻀﻟا رﺎﻌﺷإ

6

Product Overview

Boom View

Charging Port

Fan Base

Boom Cover

Pad

Top View

Baery Level Indicator

Speed/Scheduled Turn-oﬀ Indicator

Wi-Fi Indicator

Natural Breeze Indicator

Charging Base Alignment Mark

Speed Adjustment/Mode Switch Buon

Scheduled Turn-oﬀ Buon

On/Oﬀ Buon

Oscillation Buon

Charging Base

Motor & Upper Stand

Fan Base

Lower Stand

Fan Assembly

Release Buon

Charging Port

7

Installation

Step 1: Open the fan assembly Step 2: Install the rear grille

Turn the front grille counterclockwise until it separates from

the rear grille. Remove the front and rear grille, then take out the

fan blade assembly.

11

12

13

Install the rear grille onto the motor with " " facing

upwards, and then install and turn the rear grille knob

clockwise to ﬁrmly ﬁx the rear grille to the sha of the motor.

6

13

Step 3: Install the fan blade assembly

Align the center hole of the fan blade assembly with the

motor's sha to install it into position, then install the fan

blade assembly knob onto the motor's sha. Turn the knob

counterclockwise to ﬁx the fan blade assembly to the motor's

sha.

12

5

11 12 13

２

6

13

12

5

8

Installation

Step 6: Install the fan base

Insert the fan grille screw into

the hole at the boom of the fan

grille. Turn the screw clockwise with

the included hex key to tighten it.

Step 5: Fasten the front grille

8

7

Step 4: Install the front grille

Standing fan mode: Connect motor &

upper stand to the lower stand, and

then connect lower stand to the fan

base, as illustrated. Once you hear a click,

the parts have been installed successfully.

Note: Press the release buon to remove

the lower stand.

Table fan mode: Connect motor & upper

stand to the fan base. Once you hear a

click, the parts have been installed

successfully.

4

Align the front grille alignment mark with the rear grille le alignment

mark, and make sure the front grille is properly embedded into the

rear grille. Turn the front grille clockwise until the front grille

alignment mark aligns the rear grille right alignment mark. Make sure

the grilles are securely fastened.

11

13

Top View before

Fastening the

Front & Rear Grilles

Front Grille

Alignment Mark

Front Grille

Alignment Mark

Rear Grille Right

Alignment Mark

Rear Grille Le

Alignment Mark

Top View aer Fastening the

Front & Rear Grilles １

１

3

4

8

7

3

4

１

11 13

How to Use

9

Turning On/Oﬀ

Charging

≤30％

30%–100%

100％

Baery LevelFan Status

On/Oﬀ

· Connecting to the power outlet

Blinking orange

Blinking white

Oﬀ

Baery Level Indicator Status

30%–100％

1%–30%

0%

0%–100％Oﬀ

Oﬀ (The fan will automatically turn oﬀ)

Baery LevelFan Status

On

Oﬀ

· Not connecting to the power outlet

Baery Level Indicator Status

· Connect the charging base to the charging port on the boom of the fan

base, and then plug in the charging base.

· When the baery level indicator is blinking, the fan is successfully connected

to the power.

· You can use this fan by either connecting to a power outlet or not.

The fan is equipped with a built-in Wi-Fi module, and energy consumption

occurs even when it is turned oﬀ. By fully charging the fan and then turning

it oﬀ, the baery can last for approximately 2 days. To maintain optimal

baery performance, it is recommended to keep charging the fan if it is not

in use.

· It is recommended to fully charge the fan before use.

Note: Always charge and use the fan in a ﬂat, stable place.

Press the buon to start the fan. When turned on for the ﬁrst time,

the default speed is slow (1) and the mode is direct breeze.

Turning On

Turning Oﬀ

Press the buon to stop the fan while it is running.

Press the buon to adjust the speed, and the corresponding

indicators will light up (see table below). Aer the fan is turned oﬀ

and turned back on again, the speed will be the last used one.

Switching Speed/Mode

Switching Speed

Note: means the indicator is on; means the indicator is oﬀ.

Indicator

Speed Slow (1)

Orange

White

Medium (2) Fast (3) Turbo (4)

10

How to Use

Press and hold the buon to switch between direct breeze and

natural breeze. The indicator is oﬀ while in direct breeze mode and is

on while in natural breeze mode. Aer the fan is turned oﬀ and turned

back on again, the mode will be the last used one.

Switching Mode

Enable/Disable Oscillation

Press the buon to cycle through the scheduled turn-oﬀ times: 1

hour, 2 hours, 3 hours, 4 hours, and disabled, and the corresponding

indicator(s) will light up (see table below). Five seconds aer using the

scheduled turn-oﬀ function, the indicator(s) resume to indicate the

corresponding status of the current speed.

Scheduled Turn-oﬀ

Note: means the indicator is on; means the indicator is oﬀ.

Scheduled

Indicator

1 hour 2 hours 3 hours 4 hoursDisabled

For more scheduled turn-oﬀ options (up to 8 hours), please go to the Mi Home/Xiaomi

Home app.

Note: When the Wi-Fi connection is reset, the oscillation angle range will change to the default

angle of 90°. Unplug then plug the fan in or reset the Wi-Fi connection then turn on the fan, the

fan will automatically oscillate its angle if enabling the oscillation function. The oscillation time

varies depending on diﬀerent angles, please wait with patience.

Press the buon to enable or disable oscillation. You can set the

oscillation angle range in the app. Aer the fan is turned oﬀ and turned

back on again, the oscillation seing will be the last used one.

This product works with Mi Home/Xiaomi Home app*. Control

your device with Mi Home/Xiaomi Home app.

Scan the QR code to download and install the app. You will

be directed to the connection setup page if the app is

installed already. Or search "Mi Home/Xiaomi Home" in the

app store to download and install it. Open Mi Home/Xiaomi

Home app, tap"+"on the upper right, and then follow

prompts to add your device.

* The app is referred to as Xiaomi Home app in Europe

(except for Russia). The name of the app displayed on your

device should be taken as the default.

Note: The version of the app might have been updated, please

follow the instructions based on the current app version.

Connecting with Mi Home/Xiaomi Home App

Simultaneously press and hold the buons and . Once

you hear a long beep, the fan is awaiting a connection, then

you can pair it with a device via the app.

Connecting to Wi-Fi

Adjust the Airﬂow Direction

Gently li or push down the

fan's head or fan grille to

adjust the airﬂow upwards

or downwards.

23° upwards

16 °downwards

11

Motor &

Upper Stand

１

Fan Base

4

Lower Stand

３

Fan Blade

Assembly Knob

5

Charging Base

9

Care & Maintenance

Washable Parts

The parts listed below can be cleaned with a so cloth or sponge

using water or neutral detergent.

Note: Stop and unplug the fan, then disassemble it and clean its parts. Aer cleaning,

make sure all parts are completely dry before installing them and using the fan again.

Avoid direct sunlight.

Front Grille Fan Blade Assembly Rear Grille

11 12 13

Not Washable Parts

The parts listed below can be wiped clean with a so, dry cloth.

Notes: Do not rinse the parts listed above with water.

Rear Grille Knob

6

How to Use

Wi-Fi Status & Indicator Description

Wi-Fi Status

Indicator Blinking

orange

Awaiting

Connection

Blinking blue

Connecting

Blue

Connected

Orange

Fail to Connect

Simultaneously press and hold the buons and . Once you

hear a long beep, the Wi-Fi connection has been reset successfully

and then the fan is awaiting a connection. The Wi-Fi connection

needs to be reset on the circumstances listed below:

Reseing Wi-Fi Connection

The Xiaomi account that the fan is paired with has been changed.

The router that the fan is connected to has been changed.

The account or password of the router that the fan is connected to has been changed.

The Mi Home/Xiaomi Home app is unable to control the fan.

Do not use thinner, gasoline, detergent or alkaline detergent to clean any parts.

Enabling/Disabling Wi-Fi

Simultaneously press and hold the buons and for seven seconds

until you hear a notiﬁcation sound, and then the Wi-Fi is enabled or

disabled.

To disable the function of child lock, go to the page of Mi Smart

Standing Fan 2 Pro in the Mi Home/Xiaomi Home app, or simultaneously

press and hold the buons and until you hear a long beep.

Note: Reseing the Wi-Fi connection or unplugging and plugging in the fan again can also

disable this function.

Child Lock Function

12

Speciﬁcations

Product Information Requirements

Maximum Fan Flow Rate (F)

Fan Power Input (P)

Service Value (SV)

Maximum Air Velocity (c)

Measurement Standard for Service Value

Standby Power Consumption (PSB)

Fan Sound Power Level (LWA)

Contact Detailes

Test Data

20.28 m³/min

12.7 W

1.60 (m³/min)/W

3.47 meters/sec

EN IEC 60879:2019

Without Wi-Fi connection: 0.216 W

With Wi-Fi connection: 0.391 W

56.3 dB(A)

Zhejiang Xingyue Electric Equipment Co., Ltd.

South Side, 24th Floor, Jinpin Building, Headquarters Center, Yongkang City, Zhejiang Province, China

Name

Model

Smart Standing Fan 2 Pro Rated Voltage

24 W

Baery Capacity

Baery Type Rechargeable Li-ion Baery

2800 mAh(33.6 Wh)

343 × 330 × 1000 mm

≤58 dB(A)

Wi-Fi IEEE 802.11 b/g/n 2.4 GHz

Approx. 3.2 kg

12 V

Charging Input 12 V 2 A Limited Charging Voltage 0.8 V

Type Standing Fan

Net Weight

Wireless Connectivity

RF Speciﬁcation

2.4 G Wi-Fi

Operation Frequency

2412–2472 MHz

Maximum Output Power

<20 dBm

*Radio Frequency and Radio Transmission Power

Item Dimensions

Noise Emission

Rated Power

BPLDS03DM

13

Power Adapter

Troubleshooting

Information Published

Manufacturer

Input Voltage

Eﬃciency at Low Load(10%)

No-load Power Consumption

Model Identiﬁer

Input AC Frequency

Output Voltage

Output Current

Output Power

Value and Precision Unit

100–240

2.0

24.0

A

W

Average Active Eﬃciency 89.09

83.11

0.070

%

W

V~

50/60 Hz

Zhongshan Baolĳin Electronic Co., Ltd.

BLJ24W120200P-V

12.0 V

-

Fault

The fan doesn't work.

The fan is unable to connect

to Wi-Fi.

Fan blades are stuck.

The baery level indicator

does not light up.

Possible Cause Solution

The baery is depleted.

Fan blades are stuck by a foreign object.

The baery enters into sleep protection.

Unplug the fan and remove the foreign object.

Connect the fan to the charging base to activate the

baery.

The oscillation function

does not work.The fan is under the auto-oscillation state. Wait for the auto-oscillation completes. It will last for

14 seconds at most.

Charge the fan with the charging base.

The Wi-Fi connection is 5 GHz. Connect to a 2.4 GHz Wi-Fi network.

The stand does not properly connect to the fan base.

Child lock is enabled.

The fan has been oﬄine for more than half an hour. Reset the Wi-Fi connection.

Install the fan base with the stand correctly.

Disable the child lock function.

14

Manufactured for: Xiaomi Communications Co., Ltd.

Manufactured by: Zhejiang Xingyue Electric Equipment Co., Ltd.

(a Mi Ecosystem company)

Address: South Side, 24th Floor, Jinpin Building, Headquarters

Center, Yongkang City, Zhejiang Province, China

For further information, please go to www.mi.com V1.0

Hereby, Zhejiang Xingyue Electric Equipment Co., Ltd. declares that the radio equipment type BPLDS03DM is in compliance with Directive

2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

hp://www.mi.com/global/service/support/declaration.html

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed

with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a

designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities.

Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the

installer or local authorities for more information about the location as well as terms and conditions of such collection points.

Regulatory Compliance Information

Environmental Notice

Steps of Removing the Baery

Europe —EU declaration of conformity

Disposal and recycling information

The built-in rechargeable li-ion baery of this fan contains chemicals that may pollute the environment. Before disposing of this fan, remove the baery

and then discard it at a professional recycling facility.

Warning: The fan will no longer be usable once the baery is removed. The following steps should only be completed upon the permanent disposal of the fan. Do not dismantle the fan on your own for

routine maintenance.

Note: If you accidentally touch the substances leaked from the baery, wash the aﬀected area with a large amount of water and seek medical aention immediately.

1. Turn oﬀ the fan and remove the fan base.

2. Take the pads out from the fan base and unscrew the boom cover of the fan base to remove it.

3. Press the cable connector clip that connects to the baery, and pull out the cable. Then unscrew the baery to remove it.

For detailed e-manual, please go to www.mi.com/global/service/userguide

Sicherheitshinweise DIESE ANWEISUNGEN LESEN UND AUFBEWAHREN

15

Dieses Gerät ist für Kinder ab einem Alter von 8 Jahren und Personen geeignet,

die körperlich, sensorisch oder geistig behindert sind oder nicht über

ausreichend Erfahrung oder Kenntnisse verfügen, wenn sie eine Beaufsichtigung

oder Anweisung zur sicheren Nutzung des Geräts erhalten haben und wissen,

welche Gefahren aureten können. Kinder dürfen nicht mit dem Gerät spielen.

Die Reinigung und Benutzerwartung dürfen nicht von Kindern ohne Aufsicht

durchgeführt werden.

Dieses Gerät ist nicht für die Nutzung durch Personen (inklusive Kinder) mit

eingeschränkten körperlichen, sensorischen oder mentalen Fähigkeiten, oder

für Personen mit einem Mangel an Erfahrung und Wissen geeignet, es sei denn,

diese werden beaufsichtigt oder erhalten von einer Person, die für die

Sicherheit dieser Person(en) verantwortlich ist, eine Anleitung bezüglich der

Bedienung des Gerätes.

Kinder sollten beaufsichtigt werden, damit sichergestellt ist, dass diese nicht

mit dem Gerät spielen.

Unsachgemäßer Gebrauch kann zu Stromschlägen, Brand, Verletzungen oder anderen

Schäden führen.

WARNUNGEN

Sicherheitshinweise

Stellen Sie sicher, dass der Ventilator vom Stromnetz getrennt ist, bevor Sie die

Schutzvorrichtung entfernen.

Dieses Gerät enthält Akkus, die nicht ausgewechselt werden können.

WARNUNG: Zum Auﬂaden des Akkus darf ausschließlich das im Lieferumfang

dieses Geräts enthaltene abnehmbare Netzteil <BLJ24W120200P-V>

verwendet werden.

Unter normalen Betriebsbedingungen muss dieses Gerät einen Abstand von

mindestens 20cm zwischen der Antenne und dem Körper des Benutzers

einhalten.

Dieses Gerät enthält einen eingebauten Li-Ionen-Akku. Zerlegen Sie den Akku

nicht, schlagen Sie nicht auf ihn ein, zerdrücken Sie ihn nicht und werfen Sie ihn

nicht ins Feuer. Verwenden Sie diesen nicht weiter, wenn er stark anschwillt.

Der Akku darf nicht Umgebungen mit hohen Temperaturen gelassen werden.

Verwenden Sie diesen Ventilator nicht, wenn das Stromkabel der Ladestation

beschädigt oder sein Netzstecker lose ist.

Betreiben Sie keinen Ventilator mit beschädigtem Kabel oder Stecker.

Entsorgen Sie den Ventilator oder bringen Sie es zur Überprüfung und/oder

Reparatur zu einer autorisierten Kundendienststelle.

16

Verwenden Sie diesen Ventilator nicht an Orten, an denen er leicht umstürzen

kann oder an denen sich andere instabile Gegenstände in der Nähe beﬁnden.

Ziehen, verdrehen oder verbiegen Sie das Stromkabel der Ladestation nicht zu

stark, da dies den Kern des Kabels freilegen oder brechen kann.

Stecken Sie Ihre Finger oder andere Gegenstände nicht in das vordere Gier,

das hintere Gier oder die Ventilatorbläer, wenn der Ventilator in Betrieb ist.

Halten Sie Haare und Stoﬀe vom Ventilator fern, um zu vermeiden, dass sie sich

im Ventilator verfangen.

Verwenden Sie keine ungeeignete Steckdose.

Verwenden Sie die mit diesem Ventilator mitgelieferte Ladestation nicht für

andere Geräte.

Entsorgen Sie alte Akkus sachgemäß. Verbrauchte Akkus sollten in einer

professionellen Recyclinganlage entsorgt werden.

Laden Sie den Ventilator nicht auf unebenen Flächen oder Plüschmaterialien

auf. Andernfalls kann es aufgrund des schlechten Kontakts zwischen der

Ladestation und dem Ladeanschluss leicht zu einem Stromausfall oder Brand

kommen.

Bevor die Reinigung oder andere Wartungen durchgeführt wird, muss das Gerät

vom Stromnetz getrennt werden.

Sicherheitshinweise

17

Um Stromschlag, Brand, Verletzungen oder andere Schäden zu vermeiden, vergewissern Sie sich, dass der Ventilatorsockel zuletzt installiert wird. Bie befolgen Sie die

Installationsanweisungen im Benutzerhandbuch.

Schalten Sie den Ventilator nicht ein und schließen Sie ihn nicht an die Ladestation an, wenn er nicht vollständig montiert ist.

Schalten Sie den Ventilator aus oder ziehen Sie den Stecker, bevor Sie ihn installieren oder auseinandernehmen. Berühren Sie nicht die Ein-/Aus-Taste, um zu verhindern,

dass der Ventilator läu und eine Gefahr darstellt.

Installation

Halten Sie den Ventilatorständer fest, um ein Herabfallen und Verletzungen zu vermeiden.

Verwendung des Ventilators

Lehnen Sie sich nicht an den laufenden Ventilator und kippen Sie ihn nicht, während er läu.

Schüeln Sie nicht wiederholt den Kopf des Ventilators, um Schäden am internen Mechanismus zu vermeiden.

Stellen Sie die Verwendung des Ventilators sofort ein, wenn er ungewöhnliche Geräusche macht, schlechte Gerüche abgibt, sich überhitzt oder sich unregelmäßig dreht.

Auﬂaden des Ventilators

Ziehen Sie den Stecker der Ladestation nicht durch direktes Ziehen an der Schnur oder durch Wackeln aus der Steckdose heraus. Ziehen Sie stadessen den Stecker selber

heraus.

Wenn der Akku leer ist, sollte der Ventilator so schnell wie möglich aufgeladen werden. Um eine Beschädigung des Akkus zu vermeiden, schließen Sie die Ladestation

rechtzeitig an den Ventilatorsockel an.

Versuchen Sie nicht, die Ladestation selbst zu reparieren, wenn sie beschädigt ist.

Wenn die Ladestation beschädigt oder kapu ist, muss sie durch eine Original-Ladestation ersetzt werden, die beim Hersteller oder beim Kundendienst gekau wurde.

Beim Auﬂaden des Ventilators kann sich der Ventilatorsockel erwärmen. Es wird empfohlen, den Ventilator auf isolierenden Materialien oder an Orten aufzuladen, die nicht

leicht von Wärmequellen beeinﬂusst werden können, um zu verhindern, dass sich die Stellen, an denen der Ventilator aufgestellt wird, verfärben oder verformen.

Pﬂege und Wartung

Achten Sie bei der Wartung und Reinigung des Ventilators darauf, dass Sie zuerst den Ventilatorsockel abnehmen, bevor Sie andere Teile entfernen, und dass Sie den

Ventilatorsockel bei der Installation zuletzt einbauen.

Vergewissern Sie sich, dass der Ventilator vom Netz getrennt ist, bevor Sie die Schutzabdeckung entfernen.

VORSICHTSMAßNAHMEN

Transport

18

Sicherheitshinweise

Strona jest ładowana ...

Mi Xiaomi Smart Standing Fan 2 Pro Instrukcja obsługi

Mi Xiaomi Smart Standing Fan 2 Pro Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty