Y3118BN – 18” Towel Bar
Brushed Nickel Finish
Y3124BN – 24” Towel Bar
Brushed Nickel Finish
Y3118BRB – 18” Towel Bar
Mediterranean Bronze Finish
Y3124BRB – 24” Towel Bar
Mediterranean Bronze Finish
Y3118CH – 18” Towel Bar
Chrome Finish
Y3124CH – 24” Towel Bar
Chrome Finish
25300 AL MOEN DRIVE NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321-8809 FAX: (800) 848-6636
INTERNATIONAL: (440) 962-2000 FAX: (440) 962-2726
CUSTOMER SERVICE (USA): 800-882-0116 FAX: (888) 379-2720
WWW.MOEN.COM
Copyright Creative Specialties International Literature # BA1535
Towel Bar post is die cast from
highest quality zinc alloy (Zamac).
Casting is plated in Chrome, Brushed
Nickel or Mediterranean Bronze.
Towel Bar is aluminum for Chrome
and Brushed Nickel finishes and
Stainless Steel for Mediterranean
Bronze.
Cleaning Instructions:
1. Position the mounting template on the wall in the desired location.
2. Using a level, align the template and tape it to the wall.
3. Drill tw o 5/16” holes at each mounting post location that corresponds to
your product.
4. Remove the template from the wall.
5. Fold ends of the plastic toggle together and insert into each hole in the
wall.
6. Lightly tap anchors until flush with the wall.
7. One at a time, insert plastic pin into each of the anchors and lightly tap to
activate anchor. Remove pin and repeat on all anchors.
8. Remove mounting posts from the product assemblies by loosening each
setscrew.
9. Place the mounting plate on the wall over the installed wall anchors with
“UP” facing you.
10. Insert screws through the mounting plate into the anchors. Tighten the
screws.
11. Assemble the towel bar and posts.
12. While assembled, position each end post with setscrews facing down and
place over both mounting posts. Tighten the setscrew at the bottom of
each post.
Stock Number:_________________18” & 24” Towel Bar
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
18” & 24” Towel Bar
Y3118 & Y3124
Lindale™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
-
1
Moen Y3118BN Specyfikacja
- Typ
- Specyfikacja
w innych językach
- English: Moen Y3118BN Specification
Powiązane artykuły
-
Moen ValeCH3PC18 Instrukcja instalacji
-
-
-
-
-
-
-
-
Moen DN0790CH Specyfikacja
