Please keep this User Manual for future
another user, be sure that they also receive
this instruction booklet.
Unpack and check carefully there is no
transportation damage before using the
Before operating, ensure that the voltage
and frequency of power supply match the
It’s important to ground the yellow/green
conductor to earth in order to avoid electric
shock.
Disconnect main power before servicing
and maintenance.
only, but always by taking its base.
the device is from 18°C to 40°C. Operating
temperature of the device from 18°C to
50°C.
In the event of serious operating problem,
carried out by unskilled people can lead to
damage or malfunction. Please contact the
nearest authorized technical assistance
center. Always use the same type spare
parts.
Do not connect the device to any dimmer
pack.
Do not touch any wire during operation
and there might be a hazard of electric
shock.
To prevent or reduce the risk of electrical
rain or moisture.
visibly damaged.
Do not look directly at the LED light
2. SAFETY INFORMATION
1. INTRODUCTION
LED MOVING HEAD PIXEL ZOOM 7x40W.
User Manual •Instrukcja Obsługi
WARNING! The LED MOVING HEAD PIXEL ZOOM 7x40W has a powerful pan motor. The
is standing unsecured on a surface. Do not apply power to the LED MOVING HEAD PIXEL
ZOOM 7x40W unless the baase is securely fastened to a surface or to rigging hardware.
WARNING!
90 clockwise.
WARNING!
use any type of clamp that does not completely encircle the structure when fastened.
WARNING!
See Figure 2.
The LED MOVING HEAD PIXEL ZOOM 7x40W lens can focused the sun's rays, creating a
potential fire hazard and causing damage.
IMPORTANT!LED MOVING
HEAD PIXEL ZOOM 7x40W, as intense illumination can damaged the display.
WARNING!
Figure 2.