Auriol 291528 Operation and Safety Notes

TEMPERATURE STATION

TEMPERATURSTATION

Bedienungs- und Sicherheitshinweise

VÄDERST ATION

Bruksanvisning och säkerhetsanvisningar

SÄÄASEMA

Käyttö- ja turvallisuusohjeet

TEMPERATURE ST ATION

Operation and Safety Notes

ST ACJA METEO

Wskazówki dotyczące obsługi i bezpieczeństwa

TEMPERATŪROS MATAVIMO STOTELĖ

Nurodymai dėl valdymo ir saugumo

IAN 291528

GB Operation and

Safety Notes Page 5

FI Käyttö- ja turvallisuusohjeet Sivu 27

SE Bruksanvisning och

säkerhetsanvisningar Sidan 48

PL Wskazówki dotyczące

obsługi i bezpieczeństwa Strona 69

LT Nurodymai dėl valdymo

ir saugumo Puslapis 94

DE / AT / CH Bedienungs- und

Sicherheitshinweise Seite 117

25

B

28 27

222119 20 23 24

26

A

5

4

6

7

2

9

15

16

17

18

1 3

8

11121314 10

D

30

C

29

31

33 32

5 GB

Introduction .....................................................Page 6

Proper use ..........................................................Page 6

Description of parts and features ......................Page 6

Technical data ....................................................Page 8

Scope of delivery ...............................................Page 9

Safety ..................................................................Page 9

General safety information................................Page 9

Safety instructions for batteries /

rechargeable batteries ......................................Page 10

Before initial use ..........................................Page 12

General information ..........................................Page 12

Preparing to use the outdoor sensor .................Page 13

Preparing the temperature station for use ........Page 13

Setting the language / time zone /

time / date manually ..........................................Page 16

Displaying summer time .....................................Page 17

Calling up the time zone ...................................Page 17

Setting the alarm time ........................................Page 18

Calling up the alarm times ................................Page 18

Switching the alarm on / off ..............................Page 19

Using the snooze button ....................................Page 19

Displaying temperature .....................................Page 20

Calling up the minimum / maximum values ......Page 20

Displaying temperature trends ..........................Page 21

Battery state display ..........................................Page 21

Replacing the batteries ......................................Page 21

Troubleshooting ...........................................Page 22

Cleaning and maintenance ...................Page 23

Disposal .............................................................Page 23

Simplified EU declaration

of conformity ..................................................Page 25

Warranty ..........................................................Page 25

6 GB

Temperature station

Introduction

We congratulate you on the purchase of your

new product. You have chosen a high quality

product. The instructions for use are part of the

product. They contain important information

concerning safety, use and disposal. Before

using the product, please familiarise yourself

with all of the safety information and instruc-

tions for use. Only use the product as described

and for the speciﬁed applications. If you pass

the product on to anyone else, please ensure

that you also pass on all the documentation

with it.

Proper use

The product displays the indoor and outdoor

temperatures in degrees Celsius (°C) or de-

grees Fahrenheit (°F) and their maximum and

minimum values. The product also displays

the time in 12 / 24-hour clock modes and the

date. In addition, the product has two alarm

functions. The product is only suitable for use

in private households and is not intended for

commercial use.

Description of parts

and features

LC display

1

DST summer time symbol

2

DCF symbol

7 GB

3

Z

snooze function symbol

4

Date / month

5

Second

6

Day of the week display

7

MAX / MIN display (outdoor temperature)

8

Temperature trend (outdoor)

9

Outdoor temperature

10

Radio signal symbol

11

Low battery symbol (outdoor sensor)

12

MAX / MIN display (indoor temperature)

13

Indoor temperature

14

Low battery symbol (temperature

station)

15

Temperature trend (indoor)

16

/ Alarm 1 / 2 symbol

17

Hour / minute

18

ZONE time zone 2 symbol

Temperature station

19

CLOCK button

20

ALARM button

21

Z

(snooze function) / REGISTER button

22

Hanging slot

23

SELECT button

24

SET / RESET button

25

Battery compartment

26

Stand

27

Screw (ø 3 mm)

28

Dowel (ø 7.7 mm)

Outdoor sensor

29

Control LED

30

Hanging slot

8 GB

31

Battery compartment

32

Screw (ø 3 mm)

33

Dowel (ø 7.7 mm)

Technical data

Temperature station:

Temperature

measurement range: 0 °C to + 50 °C

+32 °F to +122 °F

Temperature interval: 0.1 °C

Radio signal: DCF

Batteries: 2 x AA 1.5 V

(direct current)

(pre-installed)

Frequency band: 77.5 kHz, 433.050

to 434.790 MHz

Outdoor sensor:

Temperature

measurement range: –20 °C to +60 °C

–4 °F to +140 °F

HF transmission signal: 433 MHz

HF transmission range: max. 30 metres

(in open area)

Batteries: 2 x AA 1.5 V

(direct current)

(pre-installed)

Degree of protection: IPX4 (splash-proof)

Frequency band: 433.05 to

434.790 MHz

Max. Transmitted

power: 433.92 MHz,

<10 dBm

9 GB

Note: If the LC display shows “LL.L” or

“HH.H”, that indicate the temperature is out

of measuring range.

Scope of delivery

1 Temperature station

1 Outdoor sensor

4 Batteries AA, 1.5 V (pre-installed)

2 Screws (ø 3 mm)

2 Dowels (ø 7.7 mm)

1 Instructions for use

Safety

YOU SHOULD STORE ALL SAFETY INFOR-

MATION AND INSTRUCTIONS IN A SAFE

PLACE IN CASE YOU NEED TO REFER TO

THEM AGAIN IN THE FUTURE!

General safety

information

This product can be used by children

aged from 8 years and above and per-

sons with reduced physical, sensory or

mental capabilities or lack of experience

and knowledge if they have been given

supervision or instruction concerning use

of the product in a safe way and under-

stand the hazards involved. Children shall

not play with the product. Cleaning and

10 GB

user maintenance shall not be made by

children without supervision.

Do not expose the product to an extremely

high electromagnetic ﬁeld. This may impair

the correct functioning of the product.

Please note that the guarantee does not

cover damage caused by incorrect han-

dling, non-compliance with the operating

instructions or interference with the product

by unauthorised individuals.

Safety instructions

for batteries /

rechargeable batteries

DANGER TO LIFE! Keep batteries /

rechargeable batteries out of reach of

children. If accidentally swallowed seek

immediate medical attention.

DANGER OF EXPLOSION!

Never recharge non-recharge-

able batteries. Do not short-circu

it

batteries / rechargeable batteries and /

or open them. Overheating, ﬁre or bursting

can be the result.

Never throw batteries / rechargeable

batteries into ﬁre or water.

Do not exert mechanical loads to batter-

ies / rechargeable batteries.

11 GB

Risk of leakage of batteries /

rechargeable batteries

Avoid extreme environmental conditions

and temperatures, which could aﬀect

batteries / rechargeable batteries, e.g.

radiators / direct sunlight.

Avoid contact with the skin, eyes and mu-

cous membranes. In the event of contact

with battery acid, thoroughly ﬂush the

aﬀected area with plenty of clean water

and seek immediate medical attention.

WEAR PROTECTIVE

GLOVES! Leaked or dam-

aged batteries / rechargeable

batteries can cause burns on contact with

the skin. Wear suitable protective gloves

at all times if such an event occurs.

In the event of a battery leak, immediately

remove it from the product to prevent

damage.

Only use the same type of batteries /

rechargeable batteries. Do not mix used

and new batteries / rechargeable batteries.

Remove the batteries / rechargeable bat-

teries if the product will not be used for a

longer period.

Risk of damage of the product

Only use the speciﬁed type of battery /

rechargeable battery!

When inserting ensure the correct polarity!

This is shown inside the battery compart-

ment!

12 GB

Clean the contacts on the battery and in

the battery compartment before inserting!

Remove exhausted batteries / rechargea-

ble batteries from the product immediately.

Before initial use

Activate the batteries first inside the

outdoor sensor, then inside the tem-

perature station.

Note: Remove all packaging materials from

the product.

Note: Before initial use, remove the protective

ﬁlm from the LC display.

General information

CAUTION! When choosing where to

position the product, make sure it is not exposed

to direct sunlight, vibrations, dust, heat, cold

or moisture. Do not place the product near to

heat sources, e.g. radiators, as this may result

in damage to the products.

Please ensure that neighbouring devices

are not operated at the same frequency

of 433 MHz. Such devices may cause

interference to the radio connection.

Do not place the product next to or on

metal plates. Otherwise the quality of ra-

dio wave transmission may be reduced.

Radio signal (DCF):

The DCF-Signal (time signal transmitter) is

made up of time pulses transmitted from one

13 GB

of the highest precision clocks in the world

close to Frankfurt / Main in Germany – it

varies by 1 second in 1million years.

In ideal conditions, your temperature station

can pick up this signal over a distance of up

to approx. 1,500 km around Frankfurt / Main.

Preparing to use

the outdoor sensor

Remove the battery compartment cover

from the back of the outdoor sensor.

Remove the battery safety strip.

The outdoor sensor is now ready for use

and the control LED

29

illuminates brieﬂy.

Close the battery compartment cover.

Preparing the temperature

station for use

Remove the battery compartment cover

from the back of the temperature station.

Remove the battery safety strip and tem-

perature station will sound ‘’beep’’.

Close the battery compartment cover.

Connecting the temperature station

with the outdoor sensor and the DCF

radio signal:

After removal of the battery safety strip, the

temperature station attempts to establish a con-

nection with the outdoor sensor. This process

can take a few minutes. The

Radio signal

symbol

10

ﬂashes. Once the temperature sta-

tion has successfully connected to the outdoor

14 GB

sensor, the Radio signal symbol

10

stops

ﬂashing and the temperature is shown in the

LC display.

Note: If the temperature station does not

receive the signal from the outdoor sensor w

ithin

3 minutes, the temperature station automatical

ly

starts with the reception of the radio time signal.

After successful reception of the outdoor sen-

sor signal or after 3 minutes, the temperature

station starts with the reception of the radio t

ime

signal. This process can take up to 5 minutes

and is indicated in the LC display by the ﬂash-

ing

DCF symbol

2

.

After successful reception of the DCF radio

signal, the

DCF symbol

2

is displayed

continuously in the LC display.

Note: Do not move the temperature station

while it is receiving the signal. Otherwise this

could interfere with reception. If synchronisation

is not possible when the temperature station

is being ﬁrst set up, try changing the location

(e.g. place the temperature station near to a

window).

Reception may be considerably reduced by

obstructions (e.g. concrete walls) or sources

of interference (e.g. other electrical devices).

If the reception of the radio signal continues

to be interrupted, you can set the time and

date manually (see “Setting the language /

time zone / time / date manually”).

15 GB

Mounting the temperature station

and / or the outdoor sensor on a wall:

Note: You will require an electric drill and a

crosshead screwdriver for this step.

CAUTION! DANGER TO LIFE, RISK

OF INJURY AND MATERIAL DAMAGE!

Read the operating and safety instructions for

your drill carefully.

DANGER TO LIFE!

Take care that you do not hit electricity, gas or

water lines when you drill into the wall. If nec-

essary, check with a pipe and cable detector

before drilling.

Note: Before mounting the temperature statio

n,

please remove the stand

26

by simply pulling

it oﬀ.

Mark the position of the hole (ø approx.

7.7 mm) on the wall.

Drill the hole with an electric drill.

Insert the dowel

28

,

33

into the drilled

hole.

Using a crosshead screwdriver, screw the

screw

27

,

32

into the dowel.

Hang the temperature station or outdoor

sensor by placing the hanging slot

22

,

30

to the according screw.

Note: Ensure that the outdoor sensor shouldn’t

be immersed into water and not contact with

direct sunlight. Electronic devices may adversely

aﬀect the wireless signal reception.

16 GB

Setting the language / time

zone / time / date manually

The reception of DCF radio signal where the

temperature station has been positioned may

become degraded or interrupted. If this hap-

pens you can set the product manually.

1. Press and hold down the CLOCK button

19

for about 3 seconds.

2. Press the SET / RESET button

24

to switch

between the 12- and 24-hour clock display

modes.

3. Press the CLOCK button to conﬁrm your

settings. The language option ﬂashes.

Tip: If you press and hold down the SET /

RESET button, you accelerate the process

and reach the desired value more quickly.

This quicker method can also be used for

making the following settings. If during

a period of 30seconds no buttons are

pressed, the LC display returns automati-

cally to the default display.

4. Press the SET / RESET button to set the

desired language (GE = German,

FR = French, SP = Spanish, IT = Italian,

EN = English).

5. Press the CLOCK button to conﬁrm your

settings. The time zone display ﬂashes.

6. Press the SET / RESET button to set the

desired time zone for time zone 2

(–12 hours to +12hours).

Note: Should you be in a country in

which the DCF-Signal can be received

17 GB

but the time is diﬀerent to your current lo-

cal time, you can use the time zone setting

to have the clock display your current lo-

cal time. If you ﬁnd yourself in a country

in which, for example, the local time is an

hour ahead of Central European Time

(CET), you set the time zone to +01. The

product is now still controlled by DCF but

shows the time as one hour ahead of CET.

7. Press the CLOCK button to conﬁrm your

settings. The hour display ﬂashes.

8. Press the SET / RESET button to set the

desired value.

9. Press the CLOCK button to conﬁrm your

settings.

10. Repeat steps 6 and 7 to set the values for

minute, second, year, month and date.

Note: The seconds display can only be

reset to 00.

11. After this, the LC display returns to the

default display.

Displaying summer time

Summer time is indicated by the DST symbol

1

in

the LC display. The temperature station

au-

tomatically detects from the DCF radio signal

whether it is summer time or not.

Calling up the time zone

The default display shows the time zone ac-

cording to the information provided by the

DCF-Signal.

18 GB

Press the CLOCK button

19

. The time

zone 2 symbol

18

and the according

time appear in the LC display.

Press the CLOCK button again to return to

the default display.

Setting the alarm time

You can set two diﬀerent alarm times.

1. Press and hold down the ALARM button

20

for about 3 seconds.

Note: If an alarm time has been set be-

fore, then that previously set alarm time

appears in the LC display. If not, then the

display shows 0:00 or AM 12:00.

2. The hour display ﬂashes. Press the SET /

RESET button

24

to set the desired value.

3. Press the ALARM button to conﬁrm your

settings. The minute display ﬂashes.

4. Press the SET / RESET button to set the

desired value.

5. Press the ALARM button to conﬁrm your

settings.

6. Repeat steps 2 to 5 to set the time for

Alarm 2.

Calling up the alarm times

Press ALARM button

20

once or twice to

call up the set time for Alarm 1 or Alarm

2 respectively.

Press the ALARM button again to return

to the default display.

19 GB

Switching the alarm on / oﬀ

Press the SET / RESET button

24

once to

activate Alarm 1. Press the SET / RESET

button twice to activate Alarm 2. Press the

SET / RESET button three times to activate

Alarm1 and Alarm 2.

Note: The

/ Alarm 1 / 2 symbol

16

appears in the LC display.

The alarm signal sounds as soon as the set

alarm time is reached. The alarm signal

ceases automatically after a period of

2minutes.

Press the SELECT

23

/ SET / RESET

24

/

ALARM

20

/ CLOCK button

19

to switch

oﬀ the alarm signal before it switches oﬀ

automatically.

Note: The alarm signal sounds every

day at the set time.

Press the SET / RESET button three times

to deactivate Alarm 1. Press the SET /

RESET button twice to deactivate Alarm

2. Press the SET / RESET button once to

deactivate Alarm 1 and Alarm 2.

Using the snooze button

Press the Z

Z

/ REGISTER button

21

while

the alarm signal is sounding to activate

the snooze function.

The alarm signal is silenced and the

/ Alarm 1 / 2 symbol

16

ﬂash with

the Z

Z

snooze function symbol

3

.

The alarm signal sounds again after

approx. 5 minutes.

20 GB

Press the SELECT button

23

to deactivate

the snooze function.

Displaying temperature

The LC display shows the indoor temperature

13

and the outdoor temperature

9

.

Press and hold down the SELECT button

23

for approx. 3 seconds. The °C display

ﬂashes.

Press the SET / RESET button

24

to switch

between the °C (Celsius) and °F (Fahr-

enheit) temperature scales.

Press the SELECT button to conﬁrm your

settings.

Calling up the minimum /

maximum values

The temperature station stores the maximum

and minimum values of the outdoor sensor

and of the temperature station itself.

Press the SELECT button

23

to display the

maximum values of the indoor and out

door

temperature.

Press the SELECT button again to display

the minimum values of the indoor and

outdoor temperature.

Press the SET / RESET button

24

while the

maximum and minimum values, are being

displayed to reset the values.

Press the SELECT button, to return to the

default display.

Strona jest ładowana ...

Auriol 291528 Operation and Safety Notes

Auriol 291528 Operation and Safety Notes

w innych językach

Powiązane dokumenty

Inne dokumenty