Zed-Bull Zed-Bull Instrukcja obsługi

Zed-BULL

FOR PROFESSIONALS

USER MANUAL

www.obdresource.com

CONTENT

1. IMPORTANT NOTES 1

2. MAINTENANCE AND CLEANING 1

3. ACCESSORIES 1

4. SPECIFICATIONS 2

4.1 DIMENSIONS 2

4.2 TECHNICAL DETAILS 2

5. GENERAL INFORMATION 3

6. Zed-BULL MENU 7

6.1 TRANSPONDER IDENTIFICATION 7

6.2 TRANSPONDER CLONING 8

6.3 TYPING TRANSPONDER DATA MANUALLY 10

6.4 TESTING 11

6.5 SETTINGS 11

7. OVERVIEW OF PC SOFTWARE 12

7.1 MAIN MENU 12

7.2 EXTENDED FUNCTIONS 13

7.2.1 EEPROM & MCU APPLICATIONS 14

7.2.2 PREPARING TRANSPONDER DATA 18

7.2.3 HYUNDAI KIA PIN CODE CALCULATIONS 18

7.3 TRANSPONDER PRODUCTION 18

7.4 HITAG 2 19

7.5 TRANSPONDER CATALOGUE 20

7.6 KEY-FOB 20

7.7 DATABASE 21

7.8 DISTRIBUTORS 21

7.9 SETTINGS 21

7.10 SUPPORT/CONTACT 22

www.obdresource.com

IMPORTANT NOTES 1

-This device is produced for assisting automotive locksmiths.

-Before using device, read the user manual carefully.

-Avoid strokes to device and accessories.

-Avoid device and accessories contacting with water and conductive liquids.

-Use only original accessories.

-After using device unplug power adapter.

-Do not use device under high electromagnetic field.

-Use the device in a sturdy, dust-free, well-ventilated place.

-Updated user manuals will be available at web.

MAINTENANCE AND CLEANING 2

-After using device, unplug all accessories and keep them in the package.

-Do not place heavy materials on the package.

-Keep package in room conditions.

-Clean the device with soft and dry piece of cloth.

-If a problem occurs do not disassemble the device. Contact your local

distributor or device manufacturer.

ACCESSORRIES 3

Complete package

Zed-BULL security login card

PC Usb cable

1

www.obdresource.com

Power Adapter

Lighter Adapter

Transponder box

SPECIFICATIONS 4

DIMENSIONS 4.1

Width = 285 mm

Height = 285 mm

Depth = 105 mm

Weight = 0,6 kg

External Power Supply 100/250 V – 50/60Hz AC

Current = 117 mA

Power consumption ≅ 1,05 Watt

Adapter Type 9-12 V DC

TECHNICAL DETAILS 4.2

Transponder Frequencies 125 -134 Khz

Communication Interface USB and Serial Port

Temperature range ≅ -5 C to 40C

2

www.obdresource.com

GENERAL INFORMATION 5

Zed-BULL is a friendly automotive locksmithing tool, it has been

developed for all range of automotive locksmiths from beginners to

advanced. It's ease in use, technical support and unique properties makes it a

powerfull device in the market.

Let's take a look what Zed-BULL can do.

It can identify all transponders used in autmotive industry, copy all fixed

coded transponders, copy some of 40, all 41, all 42, unlocked 44(VAG), all 45

and all 4D transponders.

Also it can copy all type of Texas 4C transponders to batteryless TPX1

transponder, all type of 4D transponders to batteryless TPX2 or Silca

Electronic heads.

It can prepare transponder from EEPROM or MCU datas of car, which

directly starts the car or ready to match with diagnostic devices.

It can calculate pin code from EEPROM, MCU, VIN number or key data

of the car for some car models.

Device is supported with PC software, where user can find usefull

informations about transponders and matching car models and remote

programming procedures. Storing unlimited(limited with Pc harddrive

capacity) customer information to database is another advantage of Zed-

BULL PC Software.

Zed-BULL PC Software also has all functionalities of the device itself

such as reading, identifying and cloning transponder.

Zed-BULL PC Software is capable of reading and writing to new

generation Philips Hitag 2 crypto transponders.

One of the most usefull feature of the PC Software is transponder

production application. User can prepare their own transponders such as; 11,

12, 13, 4C, 33, 40, 41, 42, 44 VAG, 44 Mitsubishi, 45, 46, 61, 62, 65 and 73 for

diagnostic devices.

Zed-BULL has got token system, which is free of charge .when device is

turned on, before logging in, number of tokens, 16 digit device serial number,

device software version, device applications information (ZB:refers to Zed-

BULL which is consisted of transponder cloning functions, E refers to Eeprom

application, T refers to Transponder production, 1 refers to TPX1 , D refers to

4D cloning, M refers to Multi crypto(41-44-45) application) are displayed on

the Zed-BULL screen.

3

www.obdresource.com

Tokens are loaded as in the steps below:

1.Choose 5

th

choice(settings) in the main menu.

2.Choose 4

th

choice(Load PC token) in the settings sub menu.

3.Device will give Outcode, outcode should be sent by e-mail to

token@istanbulanahtar.com as a reply of this e-mail user will get In code, this

In code should be entered carefully and correctly to the device, if

In code is entered wrong repeatedly 5 times, device will want new In code. If

In code is entered correctly, tokens will be loaded to the device.

4

www.obdresource.com

Or, tokens are

loaded directly by PC

software,

-Settings sub menu

is selected.

-Request outcode

button is clicked.

-E-mail adress of the

user is entered.

-Send button is

clicked.

-As a reply an Incode

will be sent to the e-

mail address entered

-In code should be entered carefully to the Incode box.

-Enter In code button is clicked. If successfull token will be loaded to the

device. If not successfull, Pc software will give an error message “Invalid

Incode”, then user should check and enter the Incode again.

All connections of Zed-BULL are shown in the picture below.

5

www.obdresource.com

After Power switch of the Zed-BULL is turned on, user should put the

Security login card on the antenna. Unless Security login card is put on the

antenna at start up, the Zed-BULL functions won't work, Pressing button “R”

allows to try logging in again. The Security login card is put on the antenna as

in the picture below;

Screen at start up Screen at login card error Screen at successfull login

If user looses or has problem with security login card, local distributor

should be contacted immediately.

Functions of the key pad buttons are described in the figure below.

6

www.obdresource.com

All the functionalities of Zed-BULL such as, transponder identification,

transponder cloning, transponder production, Eeprom and Mcu applications,

Pc Software are upgradable, it is possible to improve fuctionalities of Zed-

BULL with new developed technologies.

Zed-BULL MENU 6

TRANSPONDER IDENTIFICATION 6.1

This menu is used for reading and identifying transponder. Transponder

ID, transponder logic, lock status and car type for some models are displayed

on the Zed-BULL screen. Also for Renault 33 transponders, pin-code of the car

is diplayed.

Usage:

Insert customer key to the Zed-BULL antena and Press “R” button on

Zed-BULL keypad or use up and down arrow to highlight choice 1 on main

menu and press enter(right arrow).

An important point is; while reading the transponder, It should be put

on the antenna perpendicular. See pictures below.

7

www.obdresource.com

Zed-Bull screen displays of some of identified transponders are as below.

TRANSPONDER CLONING 6.2

This menu is used for duplicating transponders.

Usage:

Insert customer key to the Zed-BULL antenna and highlight choice

2(Clone chip) on main menu and press enter(right arrow).

8

www.obdresource.com

press “R” button on Zed-BULL keypad, transponder details will be displayed

on the screen,

The details of the chip will be displayed on the screen. Next, you will press the

“W” button. Suitable transponders to write onto will be displayed on the Zed-BULL screen

remove customer key from antenna and insert suitable transponder. Select

the transponder type by pressing the listed numbers on the display.

After transponder type is selected and enter button is pressed the following

expressions will be seen on Zed-BULL screen.

transponder cloning process is completed. If transponder needs to be cloned

with PC software , “Copy with PC Software” expression is displayed on the

screen.

All 4D transponders are cloned to Silca Electronic Heads (EH2) or JMA

batteryless TPX2 transponders with Zed-BULL 4D client PC software.

9

www.obdresource.com

Copying 4D transponders is possible only with Zed-BULL Client PC

Software.

User must connect to server to copy 4D transponders. Zed-BULL PC

Software connects to the server and gets neccessary datas to write on to

electronic key. User should choose correct communication port, car

manufacturer, car model and model year, if these informations are not

selected correctly, copy operation will be successfull but in order to reduce

the copying process time, these informations should be selected correctly.

After informations are selected, copy button is pressed, Connection test

will be done automatically and if it is successfull transponder pages will be

read to be send to server. The message below will be displayed.

10

www.obdresource.com

When this message is displayed, user must remove the original key from Zed-

BULL antenna, other wise, Zed-BULL will try to write on to original key and it

will cause data corruption with the original transponder.

server will give approximate time for copy process, when user confirm the

given time, copying process will start.

If user wants to end process before it is completed “Disconnect” button

should be pressed. After server makes the calculation datas will be written to

transponder automatically, if user wants to write second or third key “write”

button is pressed to write the datas to transponder. Copying process is

completed.

Note:To copy 4D transponders user should use a PC which has internet

connection.

TYPING TRANSPONDER DATA MANUALLY 6.3

If customer transponder data is present, it is possible to type these

datas manually using Zed-BULL keypad.

In main menu highlight choice 3 using up and down arrows and press

enter.

Type of transponder will be asked to user. Using up and down arrows

choose transponder type that you want to write data.

11

www.obdresource.com

Press enter, using key pad type the datas manually and press enter. Use up

and down arrows to choose the type of transponder that the datas will be

written into. Finally press “W” button to write datas to the transponder.

An important point is that the data entered manually, must include valid

information for the 11,12,13 and 4C type transponders. Before writing process

starts, Zed-BULL checks the validity of the data and informs the user if the

data is non-valid.

For example:

ID 11 : should have at least 1 “5F” byte in data string.

ID 12 : should have at least 1 “C1” byte in data string.

ID 13 : should have at least “1111 1111 xxxx xxx1” bit string in data string.

ID 4C : Crc calculation must be valid for the data string.

TESTING 6.4

This menu is used for checking whether key has a working

transponder inside or not.

Usage:

Highlight choice 4 using up and down arrows and press enter.

When there is transponder inside the key “TRANSPONDER” expression

will be displayed on Zed-BULL screen, if there is no transponder inside the key

only “TEST” expression will be displayed on the screen for some seconds and

main menu will be displayed back.

12

www.obdresource.com

SETTINGS 6.5

This menu is used for choosing device language, updating device, getting

device info and loading device token.

Usage:

Highlight choice 5 using up and down arrow and press enter, for language

selection highlight choice 1 and press enter, language options will be

displayed on the screen. Highlight your language using up and down arrows

and press enter selected language choice is now activated. Use Esc button to

return back to main menu.

Update Firmware: When user wants to update device this choice should be

selected. The loader version and the serial number is displayed on the screen.

To quit this menu device needs to be re started.Detailed information of

firmware update is described in the Pc software settings sub menu.

Device Info: When this sub menu is selected Information about device such

as: serial number, version, apllication information, device token is displayed on

the screen.

Load Device Token: Load Device Token sub menu should be choosed in

settings menu. In main menu highlight 5th choice(settings) using up and

down arrow and press enter, highlight choice 4(Load Device Token) and press

13

www.obdresource.com

enter. Details about loading token is described in General features section

(section 5).

VAG PIN READER 6.6

VAG Pin Code reader automatically extracts the pin code of the car for VAG

group. Adapter side is connected to the OBD of the car and the other side is

connected to Zed-BULL.

Zed-BULL VAG Pin Reader OBD II

1-Choose 6th choice(Pin Code Reader) from main menu.

2-Press enter, “Waiting for Module” expression will be displayed on the

screen.

3-Plug the Pin reader adapter to the OBD II connector. The device will extract

the pin code automatically and will be displayed on the screen. If extracting is

unsuccessfull, UNSUCCESSFULL expression will be displayed on the screen.

4-If pin reading is unsuccesfull try the steps from 1 to 3 again.

14

www.obdresource.com

OVERVIEW OF PC SOFTWARE 7

Zed-BULL PC software is used for EEPROM and MCU applications,

transponder production, Hitag 2 reading and writing, storing customer

information, getting informations about transponders and matching car

models, key-fob programming procedures, distributor contact details.

Transponder reading and writing can be both done with or without PC

software.

Software Setup:

Double click on the setup.exe icon and install the software. After

installing software, with the USB cable given, connect Zed-BULL to PC using

any of the USB ports. Click on Zed-BULL.exe to run the software.

Note: to use the software .NET framework(minimum version 3.5) should be

installed in your PC.

MAIN MENU 7.1

In this menu all settings must be done correctly in order to use the

software. Choose language and com port. Clicking “Refresh Port” button will

show the possible communication ports that Zed-BULL using.

After choosing correct com port, click on connect button, if connection

15

www.obdresource.com

fails, an error message will be displayed, if connection is succesfull all buttons

will be active.

In main menu window, normal read write operations are done, when

“READ” button is clicked, the transponder identification is displayed on the

software window.

Writing to transponder is done in 2 steps; first the transponder type to

write onto is choosen later “WRITE” button is clicked.

Transponder informations are added to database after clicking on “ADD

TO LIST” button.

On bottom left side status bar gives information about the existing

process. When process is completed the bar becomes totally blue.

EXTENDED FUNCTIONS 7.2

Left side of the window is reserved for EEPROM and MCU applications.

Picture of the immobox and suitable adapter of the IC programmer is

displayed on left bottom side. Details of the selected module is displayed on

the text box just below the selected module. When IC programmer adapter

picture or immobox picture is clicked bigger picture of each is displayed on

another window, the IC that must be removed from board, is marked with red

16

www.obdresource.com

buble. See the pictures below.

The EEPROM or MCU of the selected module is read with IC

Programmer. File with “.bin” or “.dat” extension is selected using open file

button from the exact location of the file in PC hard drive. After choosing the

correct file choose the format correctly, if the output file of the IC

programmer is 8 bits use 8 bit format, if the output file of the IC programmer

is 16 bits use 16 bit format. Choosing wrong format will cause corrupted data

and calculated datas will be wrong. To programme transponder, place the

correct transponder to the Zed-BULL antenna and click on button

“programme transponder”

EEPROM & MCU APPLICATIONS 7.2.1

The Eeprom & Mcu application list is given in Appendix A. As long as

new solutions are obtained number of the applications will be increased soon,

new applications will be added to software with new updates.

Important Notes:

-User must use external IC programmer to read the Eeproms and Mcus.

-The pictures of the IC programmer in Zed-Bull Pc software is for brand

Omega-Mtrk IC Programmer.

-Omega-Mtrk IC Programmer covers all the applications in the list and we

suggest this programmer. But user is free to use any of the IC programmers in

the market.

-According to the features of IC Programmer, all the Eeproms and Mcus might

need to be desoldered from immo board. For most of the IC programmers in

the market Eeproms and Mcus must be desoldered from immo board.

-While desoldering the Eeproms and Mcus, user must be very carefull, since

the pins of the Eeproms and Mcus are thin, they might be broken if not

disoldered slowly and properly.

-When an Eeprom or Mcu is read with IC Programmer, we strongly

17

www.obdresource.com

recommend user to save a copy of the original Eeprom or Mcu data file.

When a problem occurs while using the file , copy of the original file will be

still holding the needed datas and might be used for recovery.

-The Eeprom or Mcu must be soldered back in the same direction when it is

desoldered.

-While soldering back the Eeprom or Mcu, user must be carefull against

unwanted short circuits between pins.

-While reading motorola Mcus, removing the security of the Mcu is

suggested. If the Mcu is read without removing the security, all the

informations might be deleted for some Mcu types. So user must be carefull

about this detail while reading Motorola Mcus.

-Some non-original IC programmers in the market might delete Eeprom and

Mcu datas while reading. Using original IC programmers is suggested.

-While desoldering the Eeprom or Mcu, user must be careful about not

desoldering the neighbour components on the immo board accidentaly.

-For BMW applications, user must be careful about the key number. When

customer wants spare key, the original customer key should be read and the

key number should be noted(Zed-BULL is able to show key number when

read). In the PC software window proper key number should be selected.

18

www.obdresource.com

Strona jest ładowana ...

Zed-Bull Zed-Bull Instrukcja obsługi

Zed-Bull Zed-Bull Instrukcja obsługi

w innych językach

Inne dokumenty