SQ Professional 9307 Instrukcja obsługi

Kategoria
Małe urządzenia kuchenne
Typ
Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

TWIST-N-BLITZ NUTRIENT EXTRACTOR
INSTRUCTION MANUAL
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USE
SQIM 9305-9306-9307-9308 01-09-2022 V8 | © 2022 SQ Professional Ltd
2
Due to sharp parts and potential hazards, this appliance should not be used by children
under 16 years old unless supervised by an adult.
Please keep the appliance and mains cable out of the reach of children. This is not a toy!
If used by persons with reduced physical, sensory or mental capabilities, instruction and
supervision must be given to understand the use of the appliance and the hazards involved.
Always disconnect the appliance from the power socket if it is left unattended and before
assembling, disassembling or cleaning.
If the mains cable is damaged, it must be replaced by qualified persons
in order to avoid any hazards.
3
SHARP BLADES!
FEATURES
1 Spill-proof resealable
sports-style lid
2 Blending bottles 600ml x 2
3 Blade assembly
4 Motor unit
5 One-touch blend button
2
2
3
4
5
1
1
4
IMPORTANT SAFEGUARDS
Do not use the appliance in a bathroom, near water,
or outdoors. Do not operate the appliance with wet
hands or bare feet.
Do not immerse any of the parts (appliance, mains
cable, plug) in water or other liquids during use to
protect from fire, electric shock and personal injury.
Do not use the appliance if it is damaged or
malfunctioning.
Do not leave the appliance unattended whilst in use.
Use and store it out of reach of children.
Do not attempt to remove the blending bottle w
from the appliance while it is running.
Never attempt to fit the blade assembly e onto the
motor unit r without the blending bottle w.
This appliance is intended for household use only.
Do not use this appliance for any other purpose than its
intended use.
Ensure that the appliance is always placed on a firm and
flat surface, away from any edges of the worktop. Do not
place the appliance onto a metal tray or metal surface
whilst in use. Do not place the appliance on, or near, a
hot gas or electric burner or in a heated oven.
Keep the appliance and mains cable away from the
edges of worktops and out of reach of children. Route
the mains cable so it does not overhang, and cannot be
tripped over or caught.
Do not let the mains cable run across an open space,
such as between a low power socket and a table, or
across any hot area, such as a cooker. Heat may damage
the mains cable.
The connections on both sides of the mains cable
(the appliance and the power socket) should never
be strained. If the mains cable is damaged it must be
replaced by a qualified person or service to avoid any
hazards.
This appliance must not be operated by an external timer
or a remote control system.
The blade assembly e and motor unit r should always
be kept dry. Before washing and drying disconnect the
power supply; ensure that the blade assembly e and
motor unit r are completely dry before you reconnect
the appliance to power supply.
Ensure that the blade assembly e is securely in place
and a blending bottle w is correctly locked onto the
motor unit r before operating the appliance.
Do not switch on the appliance when it is empty. Ensure
there is the at least a minimum amount of liquid or solid
ingredients in the blending bottle w.
Do not attempt to remove the blending bottle w from
the appliance whilst it is running.
Switch off the appliance and unplug from the power
socket before changing attachments or approaching
parts that move while in use. Unplug the appliance when
not in use.
Ensure that the appliance has come to a complete stop
before cleaning and storing away. Keep the attachments,
motor unit r, mains cable, and plug away from sources
of heat. Store in a dry place.
Use only the blending bottles w with the motor unit r
supplied (and vice versa) and do not tamper with the
connector in any way.
Read all operating instructions before using the
appliance.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
BEFORE FIRST USE
All parts that come in touch with food are to be
thoroughly cleaned before being used for the first
time (see section on Cleaning).
Ensure that the rotary switch a is in the position 0. Take out
the required length of the mains cable and plug it into the
power socket.
5
OPERATING INSTRUCTIONS
The blades are extremely sharp. Handle carefully!
If using warm liquids or ingredients always ensure
that they are cooled down before blending.
Place one of the blending bottles w on a firm flat
surface with the open end facing up. Fill the blending
bottle w with ingredients below the 600ml mark. image
A
Fit the blade assembly e onto the blending bottle w
and tighten firmly. image B
Turn the blending bottle w upside down so that the
blade assembly e is at the bottom and align the arrow
on the blade assembly e with the arrow on the rim of
the motor unit r. image C
Twist the blending bottle w clock-wise until it locks,
then press the one-touch blend button t to start the
blending process.
Hold the one-touch blend button t until the blending
process is finished. Release the one-touch blend button
t to stop the appliance.
When blending is finished, and the blades have stopped
rotating, twist the blending bottle w counter-clockwise
to remove it from the motor unit r. Unscrew the blade
assembly e, fit the spill-proof sport-style lid q on the
blending bottle w and your healthy drink is ready to go.
image D
A C DB
USEFUL TIPS
To achieve the best results when blending solid ingredients,
cut them into small pieces before putting them into the
blending bottle w. Do not exceed the MAX mark.
Ensure that there is always enough liquid, especially if
blending solid ingredients.
In case the blades get stuck during blending process,
stop and unplug the appliance, remove the blending
bottle w from the motor unit r and give it a shake.
If the blades are still stuck, use a spatula or similar
utensil to remove the blockage.
CLEANING
Never immerse the motor unit r in water.
Wipe the motor unit r clean with a damp cloth and dry
immediately with a soft cloth to avoid scratches and water
marks on the surface.
LIGHT CLEANING
Fill the blending bottle w half way with warm soapy
water. Fit the blade assembl e, and place onto the
motor unit r. Press and hold the one-touch blend
button t for 10-20 seconds. Detach the blending bottle
w and the blade assembly e and rinse them under
running water then dry with a soft, lint-free cloth.
THOROUGH CLEANING
Be careful when handling the blades as they are
very sharp.
Blending bottles w, spill-proof sport-style lids q
and blade assembly e can be washed by hand or in a
dishwasher.
If necessary remove the rubber sealing ring from
the blade assembly e and rinse it with water. Dry
thoroughly.
Do not use harsh scourers and aggressive or abrasive
detergents.
6
GUARANTEE
The guarantee for this product is covered by SQ Professional
Limited. Any faults with this product arising through a
manufacturer defect will be covered for 1 year from the date
of purchase, subject to a valid vat receipt being presented.
This does not include faults or damage caused by misuse of
general wear and tear. SQ Professional Ltd will not be held
liable for general wear and tear, or eventual damages to
persons, animals or objects caused by incorrect installation
or deriving from improper, erroneous or unreasonable use.
Please contact customer services on 01992 716 070 or send
an e-mail to info@sqprofessional.com, Monday to Friday
from 09:30 - 17:30.
This does not affect your statutory rights.
ENVIRONMENTAL
To reduce environmental and health problems due to
hazardous substances in electrical and electronic goods,
appliances marked with the symbol below must not be
disposed of with unsorted municipal waste. Please repair,
reuse or recycle appropriately.
SPECIFICATIONS
Rated Voltage: 220-240V~
Frequency: 50Hz
Rated Power: 250W
Blending bottle capacity: 600ml
ELECTRICAL
The product must not be used without the fuse
cover fitted.
Should the power cable or the power plug become
damaged, arrange for these to be replaced by Customer
Service or a qualified person before continuing to use the
appliance. The appliance is fitted with a 3A fuse (BS1362) in
a 3A plug (BS1363).
SERVICE
The product is not user-serviceable. If it is not working, read
the instructions, check the plug fuse and main fuse/circuit
breaker. If it is still not working, consult your retailer.
If that does not solve the problem ring Customer Service –
they may be able to offer technical advice. Please have the
Model Number to hand, as they will not be able to help you
without it.
If you are advised to return the product to us, pack it
carefully, include a note with your name, address, day phone
number, and description of the problem.
If under a guarantee, say where and when it was purchased
and include a valid VAT receipt. Send it to SQ Professional Ltd.
All images are for illustration purposes only. Actual products may vary.
7
SCAN THE QR CODE TO EXPLORE
OUR FULL PRODUCT RANGE.
Voltage Business Centre, Units 1 - 3
6 Mollison Avenue, Eneld, EN3 7XQ
T: 01992 716 070 | F: 01992 700 538
WWW.SQPROFESSIONAL.COM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

SQ Professional 9307 Instrukcja obsługi

Kategoria
Małe urządzenia kuchenne
Typ
Instrukcja obsługi
Ten podręcznik jest również odpowiedni dla

w innych językach