Muji CPD-3 Instrukcja obsługi

PORTUGUÊSDEUTSCHPOLSKA ITALIANO ESPAÑOL FRANÇAIS ENGLISH

Model CPD-3

USER MANUAL

K

Thank you for purchasing this product.

K

Be sure to read this user manual before operating

the product and use it correctly.

K

Store this manual in a safe place for future

reference.

Modèle CPD-3

MANUEL D’UTILISATION

K

Merci d’avoir fait l'acquisition de ce produit.

K

Lisez attentivement ce manuel avant d’utiliser le

produit afin d’en faire un usage correct.

K

Conservez ce manuel dans un endroit sûr pour des

consultations futures.

Modelo CPD-3

MANUAL DE USUARIO

K

Gracias por comprar este producto.

K

Lea atentamente este manual para garantizar el

uso apropiado del producto.

K

Guárdelo en un lugar seguro para futuras

consultas.

3D0798450A

Modello CPD-3

MANUALE D'USO

K

Grazie per aver scelto questo prodotto.

K

Leggere attentamente le istruzioni prima di

utilizzare il prodotto.Si raccomanda di fare un uso

corretto del dispositivo.

K

Conservare il manuale in un luogo sicuro per

possibili usi futuri

Model CPD-3

PODRĘCZNIK

UŻYTKOWNIKA

K

Dziękujemy za zakup naszego produktu

K

Prosimy o wcześniejsze zapoznanie się z niniejszą

instrukcją oraz właściwe użytkowanie.

K

Niniejszą instrukcję należy zachować do

późniejszego użytku.

Modell CPD-3

BEDIENUNGSANLEITUNG

K

Vielen Dank für den Kauf dieses Produkts.

K

Lesen Sie vor Gebrauch des Gerätes die

Bedienungsanleitung und verwenden Sie es nach

Vorgabe.

K

Bewahren Sie diese Bedienungsanleitung als

Referenz auf.

Modelo CPD-3

MANUAL DO UTILIZADOR

K

Obrigado por ter comprado este produto.

K

Leia por favor este manual do utilizador antes de

colocar o produto em funcionamento de modo a

ter a certeza de que o utiliza correctamente

●

Guarde este manual num lugar seguro para futuras

consultas.

2

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The lightning flash with arrowhead

symbol, within an equilateral

triangle, is intended to alert the

user to the presence of uninsulated

“dangerous voltage” within the

product’s enclosure that may be of

sufficient magnitude to constitute a

risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended to

alert the user to the presence

of important operating and

maintenance (servicing) instructions

in the literature accompanying the

appliance.

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

8) Do not install near any heat sources such

as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9) Do not defeat the safety purpose of the

polarized or grounding-type plug. A

polarized plug has two blades with one

wider than the other. A grounding type

plug has two blades and a third grounding

prong. The wide blade or the third prong

are provided for your safety. If the provided

plug does not fit into your outlet, consult an

electrician for replacement of the obsolete

outlet.

10) Protec t the power cord from being

walked on or pinched particularly at plugs,

convenience receptacles, and the point

where they exit from the apparatus.

11) Only use attachments/accessories specified

by the manufacturer.

12) Use only with the cart,

stand, tripod, bracket,

or table specified by

the manufacturer, or

sold with the apparatus.

When a cart is used, use

caution when moving

the cart/apparatus combination to avoid

injury from tip-over.

13) Unplug this apparatus during lightning

storms or when unused for long periods of

time.

14) Refer all servicing to qualified service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

3

<Do not expose this apparatus to drips or

splashes.

<Do not place any objects filled with liquids,

such as vases, on the apparatus.

<Do not install this apparatus in a confined

space such as a book case or similar unit.

<The apparatus draws nominal non-operating

power from the AC outlet.

<The apparatus should be located close

enough to the AC outlet so that you can

easily grasp the power cord plug at any time.

<The appliance coupler is used as the

disconnect device, the disconnect device

shall remain readily operable.

<If the product uses batteries (including a

battery pack or installed batteries), they

should not be exposed to sunshine, fire or

excessive heat.

<CAUTION for products that use replaceable

lithium batteries: there is danger of explosion

if a battery is replaced with an incorrect type

of battery. Replace only with the same or

equivalent type.

WARNING: TO PREVENT FIRE OR SHOCK

HAZARD, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

CAUTION

<DO NOT REMOVE THE EXTERNAL CASES OR

CABINETS TO EXPOSE THE ELECTRONICS. NO

USER SERVICEABLE PARTS ARE WITHIN.

<IF YOU ARE EXPERIENCING PROBLEMS WITH

THIS PRODUCT, CONTACT MUJI LIMITED

FOR A SERVICE REFERRAL. DO NOT USE THE

PRODUCT UNTIL IT HAS BEEN REPAIRED.

<USE OF CONTROLS OR ADJUSTMENTS OR

PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT

IN HAZARDOUS RADIATION EXPOSURE.

MPEG Layer-3 audio coding technology licensed

from Fraunhofer IIS and Thomson.

This product is protected by certain intellectual

property rights of Microsoft. Use or distribution

of such technology outside of this product is

prohibited without a license from Microsoft.

IN NORTH AMERICA USE ONLY ON

120 V SUPPLY.

4

This equipment has been tested and found

to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference in a residential installation.

This equipment generates, uses, and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is

no guarantee that interference will not occur

in a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user

is encouraged to try to correct the interference

by one or more of the following measures:

• Reorientorrelocatetheequipmentand/or

the receiving antenna.

• Increasetheseparationbetweenthe

equipment and receiver.

• Connecttheequipmentintoanoutleton

a circuit different from that to which the

receiver is connected.

• Consultthedealeroranexperiencedradio/

TV technician for help.

CAUTION

Changes or modifications to this equipment

not expressly approved by MUJI LIMITED for

compliance will void the user’s warranty.

This product has been designed and

manufactured according to FDA regulations

“title 21, CFR, chapter 1, subchapter J, based on

the Radiation Control for Health and Safety Act

of 1968“, and is classified as class 1 laser product.

There is not hazardous invisible laser radiation

during operation because invisible laser radiation

emitted inside of this product is completely

confined in the protective housings.

The label required in this regulation is as follows:

For U.S.A.

Rear of the unit

For U.S.A.

Optical pickup

Type : DL-3150-127B

Manufacturer : Sanyo Electronics Inc.

Laser output : 7 mW

Wavelength : 790+10, -15 nm

CERTIFICATION

THIS

DTA

PRODUCT

COMPLIES

WITH

21

CFR

1040.10 AND 1040.

11

EXCEPT FOR

DEVIATIONS

PURSUANT

TO

LASER

NOTICE

NO.

50,

DATED

JUNE

24,

20

07.

TEAC

CORPOR

ATION

1 47

O

C

HIAI,

TAMA

SHI,

TOKYO,

JAPAN

THIS

DEVICE

COMPLIES

WITH

PA RT

15

OF

THE

FCC

RULES.

OPERATION

IS

SUBJECT

TO

THE

FOLLOWING

TWO

CONDITIONS:

THIS

DEVICE

MAY

NOT

CAUSE

HARMFUL

I

NTERFERENCE,

AND

THIS

DEVICE

MUST

ACCEPT

ANY

INTERFER

ENCE

RECEIVED,

INCLUDING

INTERFE

RENCE

THAT

MAY

CAUSE

UNDESI

RED

OPERATION.

5

Disposal of electrical and electronic

equipment

(a) All electrical and electronic equipment

should be disposed of separately from

the municipal waste stream via collection

facilities designated by the government or

local authorities.

(b) By disposing of electrical and electronic

equipment correctly, you will help save

valuable resources and prevent any potential

negative effects on human health and the

environment.

(c) Improper disposal of waste electrical and

electronic equipment can have serious

effects on the environment and human

health because of the presence of hazardous

substances in the equipment.

(d) The Waste Electrical and Electronic Equipment

(WEEE) symbol, which shows a wheeled bin

that has been crossed out, indicates that

electrical and electronic equipment must be

collected and disposed of separately from

household waste.

(e) Return and collection systems are available

to end users. For more detailed information

about the disposal of old electrical and

electronic equipment, please contact your

city office, waste disposal service or the shop

where you purchased the equipment.

Disposal of batteries and/or accumulators

(a) Waste batteries and/or accumulators should

be disposed of separately from the municipal

waste stream via collection facilities

designated by the government or local

authorities.

(b) By disposing of waste batteries and/or

accumulators correctly, you will help save

valuable resources and prevent any potential

negative effects on human health and the

environment.

(c) Improper disposal of waste batteries and/

or accumulators can have serious effects on

the environment and human health because

of the presence of hazardous substances in

them.

(d) The WEEE symbol, which shows a wheeled

bin that has been crossed out, indicates

that batteries and/or accumulators must be

collected and disposed of separately from

household waste.

If a battery or accumulator contains more

than the specified values of lead (Pb), mercury

(Hg), and/or cadmium (Cd) as defined in

the Battery Directive (2006/66/EC), then the

chemical symbols for those elements will be

indicated beneath the WEEE symbol.

(e) Return and collection systems are available

to end users. For more detailed information

about the disposal of waste batteries and/or

accumulators, please contact your city office,

waste disposal service or the shop where you

purchased them.

For European Customers

Pb, Hg, Cd

6

Contents

Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Before Using the Unit .................................6

Safety Precautions ....................................9

Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

MP3/WMA Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Identifying the Parts .................................15

Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Installation Method ..................................17

Connecting the AC adaptor . . . . . . . . . . . . . . . . . . . . . . . . .17

Listening to a Disc ...................................18

Listening to the Radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Troubleshooting .....................................21

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Before Using the Unit

What’s in the box

Confirm the supplied standard accessories.

Remote control unit x 1

B a t t e r y (C R 2025) for re m ot e

control unit x 1

(The battery has been installed in the

remote control unit when shipped

from the factory.)

Wall-fixing plate x 1

Screw x 4

AC adaptor x 1

(For Eurpoe) (For U.S.A)

Owner’s manual (this document) x 1

or

7

ENGLISH

Read this before operation

<

When a disc is inserted into the unit, do not tilt the

unit. Doing so might cause a malfunction.

<

Before the unit is moved, or covered with a paper

or cloth for a moving, be sure to remove the disc

from the unit. If the unit is moved with a disc

inside, it might cause a malfunction.

<

Choose the installation location of your unit

carefully. Avoid placing it in direct sunlight or

close to a source of heat. You should also avoid

locations that are subject to vibration, excessive

dust, heat, cold, or moisture. Doing so might

result in discoloration or deformation, or cause a

malfunction.

<

When the unit is turned on, if a TV is turned on

nearby lines might appear on the T V screen

depending on the frequency of the TV broadcast.

This is not a malfunction of the unit or the TV.

If you see such lines, turn off the unit (standby),

or remove the plug of the AC adaptor from the

socket.

<

While the plug of the AC adaptor is inserted into

the socket, power is consumed even in stand-by

mode.

For customers in the UK

Please change the AC adaptor plug to suit the mains

socket where you will use the unit.

1. While pulling the tab at the side of the AC adaptor

plug, pull the plug out at an angle to remove it.

2. Attach the concave part of the plug (A) to the

convex part (B) on the inside opposite the tab.

(A)

(B)

3. Insert the plug until you hear a click.

8

In order to use the product safely and correctly, and to prevent both injury to yourself and others

around you and damage to property, please read the following safety precautions carefully before use.

F

If anything unusual occurs

If smoke, a strange smell, or a strange noise is emitted from the

product

If water or foreign bodies get into the product

If the product falls and becomes damaged

You must remove the plug of the AC adaptor from the power socket

immediately.

Do not continue to use the product as this may cause a fire or electric

shock. Contact your retailer.

Before installing and removing this product, always ensure you

remove the plug of the AC adaptor from the power socket.

If the plug of the AC adaptor is still inserted into the power socket, there is a

risk of accident or electrocution.

Before moving this product, always remove the plug of the AC

adaptor from the power socket.

The cable of the AC adaptor may be damaged, and it may cause a fire or

electric shock.

If you do not use the product for an extended period of time, for

example, if you are going away on vacation, the plug of the AC

adaptor must be removed from the power socket for safety reasons.

Remove the plug of the AC adaptor from the power socket for safety

reasons before maintenance.

Otherwise, it may cause electrocution.

A

Do not damage the DC power cable and AC adaptor cable.

Do not place anything heavy on the DC power cable and AC adaptor

cable, or place the DC power cable and AC adaptor cable under the

product.

Do not alter, bend excessively, twist, pull, or heat the DC power cable

and AC adaptor cable and AC adaptor cable.

If the DC power cable or AC adaptor cable is damaged (the core is exposed

or broken), it may cause a fire or electric shock. In such a case, ask your

retailer to exchange it.



Q

Warning

If you ignore the following warnings and use the product

incorrectly, it may cause death or serious injury due to

fire or electrocution.

Disconnect at

plug

Prohibited

Safety Precautions

9

ENGLISH

A

Keep the plug of the AC adaptor free from dust.

If there is dirt or dust between the plug of the AC adaptor and the power

socket, it may cause a fire or electric shock. Remove dirt or dust after

removing the plug of the AC adaptor from the power socket.

Do not use the product with any voltage other than that indicated on

the AC adaptor.

This product is for use within the country of purchase only. It cannot be

used in other countries. Do not use the product with any power supply or

voltage other than that indicated on the AC adaptor. Do not connect the

AC adaptor to DC power supplies of on ships, etc. Doing so may cause a fire

or electric shock.

Do not use any AC adaptor other than that supplied with this

product.

Do not use the AC adaptor supplied with this product for another

equipment.

Doing so may cause a malfunction, fire, or electric shock.

Do not leave the DC power cable near any heat sources such as stoves

or other objects that produce heat.

The cover of the DC power cable may be melted and it may cause a fire or

electric shock.

Do not touch the plug of the AC adaptor with wet hands.

Doing so may result in electrocution.

Do not pull on the AC adaptor cable when you remove the plug of the

AC adaptor from the power socket.

The AC adaptor cable may be damaged, and it may cause a fire or electric

shock. Be sure to grasp the plug of the AC adaptor when removing it from

the power socket.

Do not place vases or anything containing water or other liquids on

the product.

If water gets into the product, it may cause a fire or electric shock.



Q

Warning

If you ignore the following warnings and use the product

incorrectly, it may cause death or serious injury due to

fire or electrocution.

Prohibited

10

A

Do not locate the product in a place that is either damp or dusty. Do

not use the product in a bathroom.

Do not locate the product in a place where it may be exposed to

smoke or steam, such as near a kitchen table or humidifier.

Doing so may result in a fire, electric shock, or injury.

D

Do not take this product apart.

Doing so may cause a fire or electric shock. Ask the retailer for servicing/

repairs of the inside.

Do not alter this product.

Doing so may cause a fire or electric shock.

S

The product should be located close to the power socket so that you

can easily grasp the plug of the AC adaptor at any time.

If anything unusual occurs, you must remove the plug of the AC adaptor

from the power socket immediately.

The product should be located away from another equipment in

order to be able to expel heat.

When the product is installed in a rack or similar unit, leave a space of

at least 5 cm (2 inches) above the product.

Heat is generated inside the product, and may cause a fire if not expelled

properly.

Q

Warning

If you ignore the following warnings and use the product

incorrectly, it may cause death or serious injury due to

fire or electrocution.

Prohibited

No

disassembly

Mandatory

Action

Safety Precautions (Continued)

11

ENGLISH

Q

When installing this product, refer to the installation method in this

manual at all times, taking care to observe the following.

When attaching the wall-fixing plate, make sure that you use screw fixings

that are appropriate for the structure and material of the wall. The product

may cause injury in the event that it falls from the wall.

A

Do not place the product on an unstable or uneven place.

The product may cause injury in the event that it falls from the wall.

Do not move the product during playback.

Do not pick up or move the product since the disc spins very quickly during

playback. Doing so may cause scratches on the disc.

Q

Caution

If you ignore the following cautions and use the product

incorrectly, it may cause injury to yourself and others

around you and damage to property due to electrocution

or other accidents.

Precaution

Against fall

Prohibited

12

Safety Precautions (Continued)

Battery Precautions

This product uses a battery. If you handle the battery incorrectly, it may result in the battery

heating up, catching fire, or leaking. Be sure to observe the following precautions.

S

When inserting the battery into the remote control unit, check that

the polarities (positive “+” and negative “-”) are correctly positioned,

and insert it according to the indication on the battery case.

If you insert the battery incorrectly, it may cause a fire or injury, or staining

of surrounding objects due to explosion or leaking.

If the remote control unit is not used for a long time, remove the

battery.

Battery leakage may cause a fire or injury, or staining of surrounding

objects. If the battery leaks, wipe away the leakage inside the battery

compartment and replace the battery with a new one. If the leakage

adheres to your skin, wash it with water.

A

Do not use any batteries other than those specified for the remote

control unit.

Otherwise, it may cause a fire or injury, or staining of surrounding objects

due to explosion or leaking.

Do not carry or store the battery with other metallic objects.

The battery may short circuit, which may cause it to explode or leak, etc.

D

Do not take the battery apart.

Acidic matter inside the battery may cause damage to your skin or clothes.

Q

Warning

Warnings for battery usage

Mandatory

Action

Prohibited

No

disassembly

13

ENGLISH

Continued on the next page

Discs

Discs that can be played on this

unit

This unit can play back the above-mentioned disc

types. It cannot play back the discs of the other types.

Caution:

Playback of any other type of disc could cause

loud noise and damage to speakers as well as

harm hearing. Never play back any other type of

disc.

<

Copy-protected discs and other discs that do

not conform to the CD standard might not play

correctly in this unit. If you use such discs in this

unit, MUJI LIMITED and its subsidiaries will not be

responsible for any consequences or guarantee

the quality of reproduction. If you experience

problems with such non-standard discs, you

should contact their issuers.

About CD-R/CD-RW discs

This unit can play back CD-R and CD-RW discs that

have been recorded in the audio CD format (CD-DA).

Also can playback MP3 and WMA files recorded into

the CD-R/CD-RW discs.

<

Discs created by a CD recorder must be finalized

before use with this unit.

<

Dep ending on dis c qualit y and recordin g

conditions, playback of some discs might not be

possible. Please see the manual for the device that

you used to create the disc.

<

If you are uncertain about the handling of a CD-R

or CD-RW disc, please contact the seller of the disc

directly.

Caution

<

Do not play any disc that is warped, deformed

or damaged. Playing such discs could cause

irreparable harm to the playing mechanisms.

<

Use a soft oil-based felt-tipped pen to write

information on the label side. Never use a ball-

point or hard-tipped pen, as this could cause

damage to the recorded side.

<

Never use a stabilizer. Using commercially available

CD stabilizers with this unit will damage the

mechanisms and cause them to malfunction.

<

Do not use irregularly-shaped discs (octagonal,

heart-shaped, business card size, etc.). CDs with

these shapes could damage the unit.

Handling precautions

<

Always insert a disc with the label side up. Only

one side of a Compact Disc can be played.

<

If there are scratches, fingerprints, or stains on the

recorded side (non-label side), an error may occur

when attempting to play back a disc. Handle the

disc carefully.

<

To remove a disc from its storage case, press down

on the center of the case and lift the disc out,

holding it carefully by the edges.

CDs that bear the “COMPACT disc DIGITAL AUDIO”

logo.

CD-R and CD-RW discs that have been correctly

recorded in the audio CD format and finalized.

Finalized CD-R and CD-RW discs that contain MP3/

WMA files.

How to remove

the disc

How to hold the disc

14

This unit can play MP3/WMA files recorded on a CD-R,

CD-RW discs.

<

This unit can play back monaural and stereo MP3

files that are in the MPEG-1 Audio Layer 3 format

with a sampling rate of 16 kHz or 48 kHz and a bit

rate of 32 to 320 kbps.

<

WMA file must have a sampling rate of 32 kHz, 44.1

kHz or 48 kHz, and a bit-rate of 48 to 192 kbps.

<

This unit cannot play copyright protected files.

Cautions when preparing MP3/

WMA files using a computer or

other device

<

Always include the extension in the file name. This

unit recognizes MP3 files by their “.mp3”, and WMA

files by their “.wma” file extensions.

<

Always close the session (complete disc creation).

This unit cannot play discs if the session has not

been closed.

<

If the disc contains more than 999 files or 99

folders, this unit cannot play it back correctly.

Discs (Continued)

MP3/WMA Compatibility

Storage precautions

<

Discs should be returned to their cases after use to

avoid dust and scratches that could cause the laser

pickup to “skip”.

<

Do not expose discs to direct sunlight or high-

temperature and humidity for extended periods.

Long exposure to high temperatures will warp

discs.

<

CD-R and CD-RW discs are more sensitive to the

effects of heat and ultraviolet rays than ordinary

CDs. It is important that they are not stored in

locations where they will be exposed to direct

sunlight. They should also be kept away from

sources of heat, such as radiators and heat-

generating electrical devices.

<

Dirt on the disc may cause the sound to skip or

reduce the sound quality. Be sure to keep the discs

clean.

Maintenance

<

If a disc becomes dirty, wipe its surface radially

from the center hole outward towards the outer

edge with a soft, dry cloth.

<

Never clean discs using chemicals such as record

sprays, antistatic sprays and fluids, and thinner.

Such chemicals will do irreparable damage to the

disc’s plastic surface.

15

ENGLISH

Identifying the Parts

Main unit

Remote control unit

Connection to the AC

adaptor

FM antenna

Skip button (forward) (

/

)

Forward button (

,

)

Skip button (back) (

.

)

Back button (

m

)

Stop button (

H

)

Repeat button (REPEAT)

Play/Pause button (

y

/

J

)

FM button (FM)

Volume button (VOLUME+/−)

Lens

Protective sheet (card)

DC Power cable

(play/stop)

Display*

Mode button (MODE)

Volume button (−,+)

Skip button

Back/forward button

(

.

,

/

)

Remote sensor

Central hub

Speakers

To simplify explanations, instructions

in this manual might refer to the

main unit or remote control unit only.

In such cases, the same controls on

the remote control and main unit will

operate similarly.

* The display lights up for about 10 seconds after a button is pressed. Then turns off again.

16

Remote Control Unit

Notes on using the remote

control unit

<

Even if the remote control is used within its

ef fective operation range (5 m/16'), the unit

might not respond to the remote if there are any

obstacles between them.

<

The remote control might not function if sunlight

or other bright light shines directly on the remote

sensor of the unit.

<

The remote control might function incorrectly if

it is operated near other products that generate

infrared rays or if other remote control devices

that use infrared rays are operated near the unit.

Likewise, the other products might also function

incorrectly.

Before using the remote control

When you use the remote control for the first time,

pull out the insulation sheet from the rear.

Battery replacement

The battery has been installed in the remote control

unit when shipped from the factory.

To replace the battery, pull out the battery tray from

the rear, put the lithium-ion battery (CR2025) in with

the “+” side facing up, and insert the tray again.

Battery replacement time

If the distance required between the remote control

unit and main unit decreases, or the remote control

unit's buttons don't work, the battery is exhausted. In

this case, replace the battery with a new one.

For information about the collection of batteries,

please contact your local municipality, your waste

disposal service or the place where you purchased

them.

1

Attach the wall-fixing plate to the

wall.

Choose a sturdy wall, and install the wall-fixing plate

using the supplied screws or other fixings.

<

Make sure that the wall-fixing plate does not feel

shaky or loose.

Q

Caution

Be very careful when attaching the wall-fixing

plate to the wall.

<

When attaching to walls made of plasterboard or

concrete construction etc. please make sure that

you use proprietary fixings that are appropriate for

the wall. In particular, it is very hazardous to use

regular wood screws on walls that are made of

plasterboard or a similar type of material.

2

Extend the FM antenna.

Unwind the FM antenna on the rear, and extend it.

Installation Method

17

ENGLISH

Connecting the AC

adaptor

Connect the DC power cable of the unit to the AC

adaptor, and insert the plug of the AC adaptor

into a domestic power socket.

Into a power socket

The AC adaptor

The DC power cable of

the unit

The plug of the

AC adaptor

3

Attach the unit to the wall-fixing

plate.

Line the unit up with the wall-fixing plate and clip the

back of the unit on at the slots.

<

Make sure that the unit is firmly attached.

<

Extend the FM antenna fully and position for the

best reception.

18

1

Insert the CD into the unit.

Fix the CD onto the central hub of the unit.

Q

Caution

Fix the CD firmly into the unit until you hear

a click. The CD will spin very fast, so it is

extremely hazardous if the CD is not inserted

correctly into the unit.

<

Be careful not to press the CD too hard when you

fix it. Doing so may cause scratches on the CD.

2

Gently pull the DC power cable to

play back the CD.

CD playback will start automatically.

<

The play/pause button (

y

/

J

) on the remote

control unit can also be used.

3

Press the volume buttons (−,+) to

adjust the volume.

VOL 05

<

The volume can be adjusted from the minimum

(00) to the maximum (32).

To stop the playback, gently pull the

DC power cable again.

<

The stop button (

H

) on the remote control unit

can also be used.

Removing the CD

Pull the CD straight outwards to remove it.

<

Be careful not to press the CD too hard when you

remove it. Doing so may cause scratches on the

CD.

The volume level

is shown.

Listening to a Disc

19

ENGLISH

<

During playback, press the repeat button (REPEAT)

once to play back all tracks on the disc repeatedly

from the first track (“REPEAT” is shown on the

display).

<

To stop the repeat playback, press the repeat

button (REPEAT) again (“NORMAL” is shown on the

display).

MP3/WMA Playback Order

MP3/WMA files on a CD can be stored in folders in

the same way that files are managed on a computer.

Moreover, multiple folders can be contained inside

another folder.

Here is an example of the file and folder structure

of an MP3/WMA disc, showing the order of the

folders and the playback order of the files (

1

to

7

).

02 folder

04 folder

05 folder

03 folder

folder

MP3 file

<

The playback order shown in the diagram above

may change depending on how you add, delete,

or move files or folders.

Selecting tracks

To previous track

02 00:05

<

During playback, press the skip button (

.

)

repeatedly to return to the previous tracks.

<

During playback, press the skip button (

.

)

once to return to the start of the current track.

<

During playback, keeping the skip button (

.

)

held down will take you back more quickly.

To next track

04 00:05

<

During playback, press the skip button (

/

)

repeatedly to go to the next tracks.

<

During playback, press the skip button (

/

)

once to go to the start of the next track.

<

During playback, keeping the skip button (

/

)

held down will take you ahead more quickly.

Playing back all tracks repeatedly

The track number and the

elapsed time are shown.

The track number and the

elapsed time are shown.

20

Listening to the Radio

1

Press the Mode button (MODE).

The source changes to FM.

FM 87.5

<

The FM button (FM) on the remote control unit

can also be used.

<

When a CD is not inserted into the unit, pulling

the DC power cable will also perform the same

operation.

2

Select the station you want to

listen to.

Automatic selection

FM 87.5

Hold the skip button (

.

/

) for more than

2 seconds and release it when the frequency

display starts changing continuously.

A station is tuned in automatically, and the

frequency display will stop. Repeat this step until

the station you want to listen to is found.

<

To stop the automatic tuning process, press the

skip button (

.

/

) briefly.

Manual selection

To tune in to a station the unit cannot tune in to

automatically, press the skip button (

.

/

)

repeatedly to select the station you want to

listen to.

FM 87.5

<

Press the skip button (

.

/

) briefly. The

frequency changes by a fixed step (0.1MHz). Press

repeatedly until the station you want to listen to

is tuned in.

3

Press the volume buttons (−,+) to

adjust the volume.

VOL 05

<

The volume can be adjusted from the minimum

(00) to the maximum (32).

The frequency

is shown af ter

“FM” is shown.

The volume level

is shown.

Hold down

Strona jest ładowana ...

Muji CPD-3 Instrukcja obsługi

Muji CPD-3 Instrukcja obsługi

w innych językach

Inne dokumenty