Sony XR-C2300R Instrukcja obsługi

 2000 Sony Corporation

FM/MW/LW

Cassette

Car Stereo

XR-C2300R

For installation and connections, see the supplied installation/connections

manual.

Szczegóły dotyczące instalacji i podłączeń, proszę sprawdzić w dostarczonym,

osobnym podręczniku

Informace o instalaci a zapojení naleznete v přiložené příručce Instalace /

zapojení.

Kurma ve bağlantı işlemleri için ünite beraberindeki Kurma/Bağlantılar kılavuzuna

bakınız.

П орядок установки и подключения магнитолы описан в прилагаемой

инструкции об установке/подключении.

3-868-293-41 (1)

Operating Instructions

Instrukcje Obsługi

Návod k obsluze

Kullanım kılavuzu

Руководство по эксплуатации

GB

PL

TR

CZ

RU

22

Thank you for purchasing this Sony Cassette

Player.

In addition to the cassette playback and radio

operations, you can expand your system by

connecting an optional CD/MD unit*

1

.

When you operate this unit or a connected

optional CD unit with the CD TEXT function,

the CD TEXT information will appear in the

display when you play a CD TEXT disc*

2

.

*

1

You can connect a CD changer, an MD changer,

a CD player, or an MD player.

*

2

A CD TEXT disc is an audio CD that includes

information such as the disc name, artist name,

and track names.

This information is recorded on the disc.

Welcome ! Precautions

• If your car was parked in direct sunlight

resulting in a considerable rise in

temperature inside the car, allow the unit to

cool off before operating it.

• If no power is being supplied to the unit,

check the connections first. If everything is in

order, check the fuse.

• If no sound comes from the speakers of a

two-speaker system, set the fader control to

the centre position.

• When a tape is played back for a long period,

the cassette may become warm because of

the built-in power amplifier. However, this is

not a sign of malfunction.

If you have any questions or problems

concerning your unit that are not covered in

this manual, please consult your nearest Sony

dealer.

To maintain high quality sound

If you have drink holders near your audio

equipment, be careful not to splash juice or

other soft drinks onto the car audio. Sugary

residues on this unit or cassette tapes may

contaminate the playback heads, reduce the

sound quality, or prevent sound reproduction

altogether.

Cassette cleaning kits cannot remove sugar

from the tape heads.

33

Notes on Cassettes

Cassette care

• Do not touch the tape surface of a cassette, as

any dirt or dust will contaminate the heads.

• Keep cassettes away from equipment with

built-in magnets such as speakers and

amplifiers, as erasure or distortion on the

recorded tape could occur.

• Do not expose cassettes to direct sunlight,

extremely cold temperatures, or moisture.

• Slack in the tape may cause the tape to be

caught in the machine. Before you insert the

tape, use a pencil or similar object to turn the

reel and take up any slack.

• Distorted cassettes and loose labels can cause

problems when inserting or ejecting tapes.

Remove or replace loose labels.

• The sound may become distorted while

playing the cassette. The cassette player head

should be cleaned after each 50 hours of use.

Slack

Cassettes longer than 90 minutes

The use of cassettes longer than 90 minutes is

not recommended except for long continuous

play. The tape used for these cassettes is very

thin and tends to stretch easily. Frequent

playing and stopping of these tapes may cause

them to become entangled in the cassette deck

mechanism.

44

Location of controls ................................................. 5

Getting Started

Resetting the unit ................................................ 6

Detaching the front panel .................................. 6

How to use the menu ......................................... 6

Setting the clock .................................................. 7

Cassette Player

Listening to a tape ............................................... 7

Radio Reception during Fast-forwarding or

Rewinding of a Tape

— ATA (Automatic Tuner Activation) ........ 8

Radio

Memorizing stations automatically

— Best Tuning Memory (BTM).................... 9

Memorizing only the desired stations ............. 9

Receiving the memorized stations.................... 9

RDS

Overview of the RDS function ......................... 11

Displaying the station name.............................11

Retuning the same programme automatically

— Alternative Frequencies (AF) ................. 11

Listening to traffic announcements ................ 13

Presetting the RDS stations with the AF and

TA data .......................................................... 13

Locating a station by programme type .......... 14

Setting the clock automatically ....................... 15

Other Functions

Adjusting the sound characteristics ............... 16

Changing the sound and display settings ..... 16

Boosting the bass sound

— D-bass ....................................................... 17

CD/MD Unit

Playing a CD or MD ......................................... 17

Playing tracks repeatedly

— Repeat Play .............................................. 19

Playing tracks in random order

— Shuffle Play .............................................. 19

Additional Information

Maintenance....................................................... 20

Dismounting the unit ....................................... 20

Specifications ..................................................... 21

Troubleshooting guide ..................................... 22

This Unit Only

Table of Contents

With Optional Equipment

55

Location of controls

Refer to the pages listed for details.

1 MENU button

7, 8, 9, 10, 12, 14, 15, 16, 18

2 Volume control dial

3 SOURCE (TUNER/CD/MD) button

9, 10, 13, 17

4 PRST/DISC +/– (cursor up/down) buttons

7, 8, 9, 10, 12, 14, 15, 16, 18, 19

During radio reception:

Preset stations select 8, 9, 10

During CD/MD playback:

Disc change 19

5 DSPL/PTY (display mode change/

programme type) button

8, 10, 11, 15, 18

6 MODE button

During radio reception:

BAND select 9, 10

During CD or MD playback:

CD/MD unit select 17

7 Z (eject) button 7

8 Display window

9 m/M (fast winding)/DIR (tape

transport direction change) buttons 7

q; D-BASS button 17

qa TA button 13, 14

qs SOUND button 16

qd RELEASE (front panel release) button

6, 20

qf SEEK/AMS –/+ (cursor left/right) buttons

7, 8, 9, 10, 12, 14, 15, 16, 18, 19

seek 9, 10

Automatic Music Sensor 19

manual search 19

qg Reset button (located on the front side

of the unit behind the front panel) 6

qh ENTER button

7, 8, 9, 10, 12, 14, 15, 16, 18

qj Number buttons

During radio reception

Preset number select 9, 10, 12

During CD/MD playback:

(1) REP 19

(2) SHUF 19

qk OFF button* 6

ql AF button 11, 12, 14

* Warning when installing in a car

without ACC (accessory) position on

the ignition key switch

Be sure to press (OFF) on the unit for two

seconds to turn off the clock display after

turning off the engine.

When you press (OFF) momentarily, the

clock display does not turn off and this

causes battery wear.

XR-C2300R

D

I

S

C

+

P

R

S

T

+

-

D

I

S

C

–

P

R

S

T

-

MODE

DSPL

OFF

PTY

DIR

D-BASS

ENTER

MENU

SOUND

RELEASE

1 2 3 4 56

-

SEEK/AMS

REP SHUF

TA

AF

SOURCE

66

Getting Started

Resetting the unit

Before operating the unit for the first time or

after replacing the car battery, you must reset

the unit.

Remove the front panel and press the reset

button with a pointed object, such as a

ballpoint pen.

Note

Pressing the reset button will erase the clock

setting and some memorized functions.

Detaching the front panel

You can detach the front panel of this unit to

protect the unit from being stolen.

1 Press (OFF).

2 Press (RELEASE), then slide the front

panel a little to the left, and pull it off

towards you.

Notes

• Be sure not to drop the panel when detaching it

from the unit.

• If you detach the panel while the unit is still

turned on, the power will turn off automatically

to prevent the speakers from being damaged.

• When carrying the front panel with you, use the

supplied front panel case.

Reset button

(OFF)

(RELEASE)

A

B

SOURCE

Attaching the front panel

Attach part A of the front panel to part B of

the unit as illustrated and push the left side

into position until it clicks.

Notes

• Be sure not to attach the front panel upside

down.

• Do not press the front panel too hard against the

unit when attaching it.

• Do not press too hard or put excessive pressure

on the display window of the front panel.

• Do not expose the front panel to direct sunlight

or heat sources such as hot air ducts, and do not

leave it in a humid place. Never leave it on the

dashboard of a car parked in direct sunlight or

where there may be a considerable rise in

temperature.

Caution alarm

If you turn the car ignition off without

removing the front panel, the caution alarm

will beep for a few seconds.

If you connect an optional power amplifier and

do not use the built-in amplifier, the beep

sound will be deactivated.

How to use the menu

This unit is operated by selecting items from a

menu.

To select, first enter the menu mode and

choose up/down (+/– of (PRST/DISC)), or

choose left/right (–/+ of (SEEK/AMS)).

(PRST/DISC)

(+) : To select upwards

(–) : To select downwards

77

Cassette Player

Listening to a tape

Insert a cassette.

Playback starts automatically.

The side facing up is played.

The side facing down is played.

Tip

To change the tape‘s playback direction, press m

and M.

To stop playback and eject the

cassette

Press Z.

Fast-winding the tape

During playback, press m or M.

* The < > indicator will flash while fast-winding

the tape.

To start playback during fast-forwarding or

rewinding, press the other fast-winding button

partially until the locked button is released.

To rewind

m

M

Direction

indicator*

FWD

REV

To advance

M

m

(SEEK/AMS)

Setting the clock

The clock uses a 24-hour digital indication.

Example: To set the clock to 10:08

1 Press (MENU), then press either side of

(PRST/DISC) repeatedly until “CLOCK”

appears.

1 Press (ENTER).

The hour indication flashes.

2 Press either side of (PRST/DISC) to set

the hour.

3 Press + side of (SEEK/AMS).

The minute indication flashes.

4 Press either side of (PRST/DISC) to set

the minute.

2 Press (ENTER).

The clock starts.

After the clock setting is complete, the

display returns to normal playback mode.

SOURCE

(–) : To select

leftwards

(+) : To select

rightwards

88

Changing the display item

Each time you press (DSPL/PTY), the item

changes as follows:

Tape playback y Frequency*

* While either of the following functions are

activated.

— ATA function

— AF function

— TA function

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the above

items are scrolled in the display one by one in

order.

Tip

The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 16).

Radio Reception during

Fast-forwarding or

Rewinding of a Tape

— ATA (Automatic Tuner Activation)

When fast-forwarding or rewinding with the

m or M button, the tuner will turn on

automatically.

1 During playback, press (MENU).

2 Press either side of (PRST/DISC)

repeatedly until “ATA” appears.

3 Press + side of (SEEK/AMS) to select

“ON.”

Play mode starts.

4 Press (ENTER).

To return to normal playback mode, select

“OFF” in step 3 above.

99

Radio

Memorizing stations

automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest

signals and memorizes them in the order of

their frequencies. You can store up to 6 stations

on each band (FM1, FM2, FM3, MW, and LW).

Caution

When tuning in stations while driving, use

Best Tuning Memory to prevent accidents.

1 Press (SOURCE) repeatedly to select the

tuner.

Each time you press (SOURCE), the source

changes as follows:

B TUNER B CD* B MD*

* If the corresponding optional equipment is

not connected, this item will not appear.

2 Press (MODE) repeatedly to select the

band.

Each time you press (MODE), the band

changes as follows:

B FM1 B FM2 B FM3 B MW B LW

3 Press (MENU), then press either side of

(PRST/DISC) repeatedly until “BTM”

appears.

4 Press (ENTER).

The unit stores stations in the order of their

frequencies on the number buttons.

A beep sounds when the setting is stored.

Notes

• The unit does not store stations with weak

signals. If only a few stations can be received,

some number buttons will retain their former

setting.

• When a number is indicated in the display, the

unit starts storing stations from the one currently

displayed.

Memorizing only the

desired stations

You can preset up to 18 FM stations (6 each for

FM1, 2, and 3), up to 6 MW stations, and up to

6 LW stations in the order of your choice.

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press either side of (SEEK/AMS) to tune

in the station that you want to store on

the number button.

4 Press and hold the desired number

button ((1) to (6)) until “MEM” appears.

The number button indication appears in

the display.

Note

If you try to store another station on the same

number button, the previously stored station will

be erased.

1010

Receiving the memorized

stations

1 Press (SOURCE) repeatedly to select the

tuner.

2 Press (MODE) repeatedly to select the

band.

3 Press the number button ((1) to (6)) on

which the desired station is stored.

Tip

Press either side of (PRST/DISC) to receive the

stations in the order they are stored in the

memory (Preset Search Function).

If you cannot tune in a preset

station

Press either side of (SEEK/AMS) to search

for the station (automatic tuning).

Scanning stops when the unit receives a

station. Press either side of (SEEK/AMS)

repeatedly until the desired station is

received.

Note

If the automatic tuning stops too frequently, press

(MENU), then press either side of (PRST/DISC)

repeatedly until “LOCAL” (local seek mode) is

displayed. Then press + side of

(SEEK/AMS) to select “LOCAL-ON.” Press (ENTER).

Only the stations with relatively strong signals will

be tuned in.

Tip

If you know the frequency of the station you want

to listen to, press and hold either side of

(SEEK/AMS) until the desired frequency appears

(manual tuning).

If FM stereo reception is poor

— Monaural Mode

1 During radio reception, press (MENU),

then press either side of (PRST/DISC)

repeatedly until “MONO” appears.

2 Press + side of (SEEK/AMS) until “MONO-

ON“ appears.

The sound improves, but becomes

monaural (“ST” disappears).

3 Press (ENTER).

To return to normal mode, select “MONO-

OFF” in step 2 above.

Changing the display item

Each time you press (DSPL/PTY), the item

changes as follows:

Frequency (Station Name)* y Programme type

* When you tune in an FM station that transmits

RDS data, the station name appears.

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the above

items are scrolled in the display one by one in

order.

Tip

The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 16).

11

Tip

The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 16).

Note

“NO NAME” appears if the received station does

not transmit RDS data.

Retuning the same

programme automatically

— Alternative Frequencies (AF)

The Alternative Frequencies (AF) function

automatically selects and retunes the station

with the strongest signal in a network. By

using this function, you can continuously

listen to the same programme during a long-

distance drive without having to retune the

station manually.

1 Select an FM station (page 9).

2 Press (AF) repeatedly until “AF-ON”

appears.

The unit starts searching for an alternative

station with a stronger signal in the same

network.

Note

When there is no alternative station in the area

and you do not need to search for an alternative

station, turn the AF function off by pressing (AF)

repeatedly until “AF-OFF” appears.

102.5MHz

96.0MHz

98.5MHz

Frequencies change automatically.

Station

RDS

Overview of the RDS

function

Radio Data System (RDS) is a broadcasting

service that allows FM stations to send

additional digital information along with the

regular radio programme signal. Your car

stereo offers you a variety of services. Here are

just a few: retuning the same programme

automatically, listening to traffic

announcements, and locating a station by

programme type.

Notes

• Depending on the country or region, not all of

the RDS functions are available.

• RDS may not work properly if the signal strength

is weak or if the station you are tuned to is not

transmitting RDS data.

Displaying the station

name

The name of the current station lights up in the

display.

Select an FM station (page 9).

When you tune in an FM station that

transmits RDS data, the station name

appears in the display.

Note

The “*” indication means that an RDS station is

being received.

Changing the display item

Each time you press (DSPL/PTY), the item

changes as follows:

Station Name (Frequency) y Programme type

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the above

items are scrolled in the display one by one in

order.

12

Local link function

(United Kingdom only)

The Local Link function lets you select other

local stations in the area, even if they are not

stored on your number buttons.

1 Press a number button that has a local

station stored on it.

2 Within five seconds, press the number

button of the local station again.

3 Repeat this procedure until the desired

local station is received.

Changing the display item

Each time you press (AF), the item changes as

follows:

AF-ON y AF-OFF

Notes

• When “NO AF” and the station name flash

alternately, it means that the unit cannot find an

alternative station in the network.

• If the station name starts flashing after selecting

a station with the AF function on, this indicates

that no alternative frequency is available. Press

either side of (SEEK/AMS) while the station name

is flashing (within eight seconds). The unit starts

searching for another frequency with the same PI

(Programme Identification) data (“PI SEEK”

appears and no sound is heard). If the unit

cannot find another frequency, “NO PI” appears,

and the unit returns to the previously selected

frequency.

Listening to a regional programme

The “REG-ON” (regional on) function lets you

stay tuned to a regional programme without

being switched to another regional station.

(Note that you must turn the AF function on.)

The unit is factory preset to “REG-ON,” but if

you want to turn off the function, do the

following.

1 During radio reception, press (MENU),

then press either side of (PRST/DISC)

repeatedly until “REG” appears.

2 Press + side of (SEEK/AMS) until “REG-

OFF” appears.

3 Press (ENTER).

Note that selecting “REG-OFF” might cause

the unit to switch to another regional

station within the same network.

To return to regional on, select “REG-ON” in

step 2 above.

Note

This function does not work in the United

Kingdom and in some other areas.

13

Presetting the volume of traffic

announcements

You can preset the volume level of the traffic

announcements beforehand so you won’t

miss the announcement. When a traffic

announcement starts, the volume will be

automatically adjusted to the preset level.

1 Select the desired volume level.

2 Press (TA) for two seconds.

“TA” appears and the setting is stored.

Receiving emergency

announcements

If an emergency announcement comes in while

you are listening to the radio, the programme

will automatically switch to it. If you are

listening to a source other than the radio, the

emergency announcements will be heard if

you set AF or TA to on. The unit will then

automatically switch to these announcements

no matter which source you are listening to at

the time.

Presetting the RDS

stations with the AF and

TA data

When you preset RDS stations, the unit stores

each station’s data as well as its frequency, so

you don’t have to turn on the AF or TA

function every time you tune in the preset

station. You can select a different setting (AF,

TA, or both) for individual preset stations, or

the same setting for all preset stations.

Listening to traffic

announcements

The Traffic Announcement (TA) and Traffic

Programme (TP) data let you automatically

tune in an FM station that is broadcasting

traffic announcements even if you are listening

to other programme sources.

Press (TA) repeatedly until “TA-ON”

appears.

The unit starts searching for traffic

information stations. “TP” appears in the

display when the unit finds a station

broadcasting traffic announcements.

When the traffic announcement starts,

“TA” flashes. The flashing stops when the

traffic announcement is over.

Tip

If the traffic announcement starts while you are

listening to another programme source, the unit

automatically switches to the announcement and

goes back to the original source when the

announcement is over.

Notes

•

“NO TP” flashes for five seconds if the received

station does not broadcast traffic announcements.

Then, the unit starts searching for a station that

broadcasts it.

• When “EON” appears with “TP” in the display,

the current station makes use of broadcast traffic

announcements by other stations in the same

network.

To cancel the current traffic

announcement

Press (TA) or (SOURCE).

To cancel all traffic announcements, turn off

the function by pressing (TA) until

“TA-OFF” appears.

14

Presetting the same setting for all

preset stations

1 Select an FM band (page 9).

2 Press (AF) or/and (TA) to select “AF-ON”

or/and “TA-ON.”

Note that selecting “AF-OFF” or “TA-OFF”

stores not only RDS stations, but also non-

RDS stations.

3 Press (MENU), then press either side of

(PRST/DISC) repeatedly until “BTM”

appears.

4 Press + side of (SEEK/AMS) until “BTM”

flashes.

5 Press (ENTER).

Presetting different settings for

each preset station

1 Select an FM band, and tune in the

desired station.

2 Press (AF) or/and (TA) to select “AF-ON”

or/and “TA-ON.”

3 Press the desired number button and

hold until “MEM” appears.

Repeat from step 1 to preset other stations.

Tip

If you want to change the preset AF and/or TA

setting after you tune in the preset station, you

can do so by turning the AF or TA function on or

off.

Locating a station by

programme type

You can locate the station you want by

selecting one of the programme types shown

below.

Programme types Display

News NEWS

Current Affairs AFFAIRS

Information INFO

Sports SPORT

Education EDUCATE

Drama DRAMA

Culture CULTURE

Science SCIENCE

Varied VARIED

Popular Music POP M

Rock Music ROCK M

Easy Listening EASY M

Light Classical LIGHT M

Classical CLASSICS

Other Music Type OTHER M

Weather WEATHER

Finance FINANCE

Children’s Programmes CHILDREN

Social Affairs SOCIAL A

Religion RELIGION

Phone In PHONE IN

Travel TRAVEL

Leisure LEISURE

Jazz Music JAZZ

Country Music COUNTRY

National Music NATION M

Oldies Music OLDIES

Folk Music FOLK M

Documentary DOCUMENT

Not specified NONE

Note

You cannot use this function in some countries

where no PTY (Programme Type selection) data is

available.

15

1 Press (DSPL/PTY) during FM reception

until “PTY” appears.

The current programme type name appears

if the station is transmitting the PTY data.

“- - - - -” appears if the received station is

not an RDS station, or if the RDS data has

not been received.

If the TA function is ON, the unit starts

searching for the next station.

2 Press (PRST/DISC) repeatedly until the

desired programme type appears.

The programme types appear in the order

shown in the above table. Note that you

cannot select “NONE” (Not specified) for

searching.

3 Press (ENTER) repeatedly until the

desired station is received.

The unit starts searching for a station

broadcasting the selected programme type.

When the unit finds the programme, the

programme type appears again for five

seconds.

“NO” and the programme type appear

alternately for five seconds if the unit

cannot find the programme type. It then

returns to the previously selected station.

Setting the clock

automatically

The CT (Clock Time) data from the RDS

transmission sets the clock automatically.

1 During radio reception, press (MENU),

then press either side of (PRST/DISC)

repeatedly until “CT” appears.

2 Press + side of (SEEK/AMS) repeatedly

until “CT-ON” appears.

The clock is set.

3 Press (ENTER) to return to the normal

display.

To cancel the CT function

Select “CT-OFF” in step 2 above.

Notes

• The CT function may not work even though an

RDS station is being received.

• There might be a difference between the time

set by the CT function and the actual time.

16

Changing the sound and

display settings

The following items can be set:

•CLOCK (page 7).

•CT (Clock Time) (page 15).

•BEEP – to turn the beep sound on or off.

•A.SCRL (Auto Scroll)* (page 18).

•D.INFO (Dual Information) to display the

clock and the play mode at the same time

(ON) or to display the information

alternately (OFF).

•M.DSPL (Motion Display) – to turn the

motion display on or off.

1 Press (MENU).

2 Press either side of (PRST/DISC)

repeatedly until the desired item

appears.

Each time you press (–) side of

(PRST/DISC), the item changes as follows:

CLOCK t CT t BEEP t A.SCRL* t D.INFO t

M.DSPL

* When the radio is off, or when no tape, CD,

or MD is playing, this item will not appear.

3 Press (+) side of (SEEK/AMS) to select the

desired setting (Example: ON or OFF).

4 Press (ENTER).

After the mode setting is complete, the

display returns to normal playback mode.

Other Functions

Adjusting the sound

characteristics

You can adjust the bass, treble, balance, and

fader.

You can store the bass and treble levels

independently for each source.

1 Select the item you want to adjust by

pressing (SOUND) repeatedly.

BAS (bass) t TRE (treble) t

BAL (left-right) t FAD (front-rear)

2 Adjust the selected item by pressing

either side of (SEEK/AMS).

Adjust within three seconds after selecting

the item.

17

GB

0dB

D.BASS-3

D.BASS-2

D.BASS-1

D.BASS-3

D.BASS-2

D.BASS-1

Boosting the bass sound

— D-bass

You can enjoy a clear and powerful bass

sound. The D-bass function boosts the low

frequency signal and high frequency signal

with a sharper curve than conventional bass

boost.

You can hear the bass line more clearly even

while the vocal volume remains the same. You

can emphasize and adjust the bass sound

easily with the D-BASS control.

Adjusting the bass curve

Press (D-BASS) repeatedly to select the

desired bass curve.

As the D-BASS number increases so does

the effect.

D.BASS-1 t D.BASS-2 t D.BASS-3 t

D.BASS-OFF

Note

The bass sound may distort at same volume. If the

bass sound distorts, select less effective bass curve.

Level

Frequency (Hz)

With Optional Equipment

CD/MD Unit

This unit can control a maximum of ten

external CD/MD units in this configuration:

CD unit – maximum of five

MD unit – maximum of five

Any combination up to ten will work.

If you connect an optional CD unit with the

CD TEXT function, the CD TEXT information

will appear in the display when you play a CD

TEXT disc.

Playing a CD or MD

1 Press (SOURCE) repeatedly to select CD

or MD.

2 Press (MODE) until the desired unit

appears.

CD/MD playback starts.

When a CD/MD unit is connected, all the

tracks play from the beginning.

18

Automatically scrolling a disc name

— Auto Scroll

If the disc name, artist name, or track name on

a CD TEXT disc or MD exceeds 8 characters

and the Auto Scroll function is on, information

automatically scrolls across the display as

follows:

• The disc name appears when the disc has

changed (if the disc name is selected).

• The track name appears when the track has

changed (if the track name is selected).

If you press (DSPL/PTY) to change the display

item, the disc or track name of the MD or CD

TEXT disc is scrolled automatically whether

you set the function on or off.

1 During playback, press (MENU).

2 Press either side of (PRST/DISC)

repeatedly until “A.SCRL” appears.

3 Press + side of (SEEK/AMS) to select

“A.SCRL-ON.”

4 Press (ENTER).

To cancel Auto Scroll, select “A.SCRL-OFF” in

step 3 above.

Note

For some discs with very many characters, the

following cases may happen:

— Some of the characters are not displayed

— Auto Scroll does not work.

Changing the display item

Each time you press (DSPL/PTY) during CD,

CD TEXT, or MD playback, the item changes

as follows:

V

Elapsed playback time

V

Disc name*

1

/Artist name*

2

V

Track name*

3

V

FM1 frequency*

4

*

1

If you have not labelled the disc or if there is no

disc name prerecorded on the MD, “NO NAME”

appears in the display.

*

2

If you play a CD TEXT disc, the artist name

appears in the display after the disc name. (Only

for CD TEXT discs with the artist name.)

*

3

If the track name of a CD TEXT disc or MD is not

prerecorded, “NO NAME” appears in the

display.

*

4

While the AF/TA function is activated.

After you select the desired item, the display

will automatically change to the Motion

Display mode after a few seconds.

In the Motion Display mode, all the above

items are scrolled in the display one by one in

order.

Tip

The Motion Display mode can be turned off. (See

“Changing the sound and display settings” on

page 16).

19

GB

SOURCE

Locating a specific track

— Automatic Music Sensor (AMS)

During playback, press either side of

(SEEK/AMS) momentarily for each track

you want to skip.

Locating a specific point in a track

— Manual Search

During playback, press and hold either

side of (SEEK/AMS). Release when you

have found the desired point.

Switching to other discs

During playback, press either side of

(PRST/DISC).

The desired disc in the current unit begins

playback.

To locate

succeeding tracks

To locate

preceding tracks

To search forwardTo search

backward

For preceding

discs

For succeeding

discs

Disc number

Track number

Playing tracks repeatedly

— Repeat Play

You can select:

•REP-1 – to repeat a track.

•REP-2 – to repeat a disc.

During playback, press (1) (REP)

repeatedly until the desired setting

appears.

B REP-1 B REP-2

REP-OFF b

Repeat Play starts.

To return to normal playback mode, select

“REP-OFF” in step above.

Playing tracks in random

order — Shuffle Play

You can select:

•SHUF-1 – to play the tracks on the current

disc in random order.

•SHUF-2 – to play the tracks in the current

unit in random order.

•SHUF-ALL – to play all the tracks in all the

units in random order.

During playback, press (2) (SHUF)

repeatedly until the desired setting

appears.

B SHUF-1 B SHUF-2

SHUF-OFF b SHUF-ALL b

Shuffle Play starts.

To return to normal playback mode, select

“SHUF-OFF” in step above.

20

Release key (supplied)

Notes

• For safety, turn off the engine before cleaning

the connectors and remove the key from the

ignition switch.

• Never touch the connectors directly with your

fingers or any metal device.

Dismounting the unit

1

2

3

4

Fuse (10 A)

Additional

Information

Maintenance

Fuse replacement

When replacing the fuse, be sure to use one

matching the amperage rating stated on the

original fuse. If the fuse blows, check the

power connection and replace the fuse. If the

fuse blows again after replacement, there may

be an internal malfunction. In such a case,

consult your nearest Sony dealer.

Warning

Never use a fuse with an amperage rating

exceeding the one supplied with the unit as

this could damage the unit.

Cleaning the connectors

The unit may not function properly if the

connectors between the unit and the front

panel are not clean. In order to prevent this,

open the front panel by pressing (RELEASE),

then detach it and clean the connectors with a

cotton swab dipped in alcohol. Do not apply

too much force. Otherwise, the connectors may

be damaged.

Main unit

Back of the front panel

Strona jest ładowana ...

Sony XR-C2300R Instrukcja obsługi

Sony XR-C2300R Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty