LG WFT85B30EPT Instrukcja obsługi

Kategoria
Pralki
Typ
Instrukcja obsługi
Washing Machine
OWNER S MANUAL
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model name and serial number of the set.
Quote this information to your dealer when you require service.
P/No. : 3828EY3052G
MODEL : WFT75A31EP / WFT85B31EHT
WFT85B30EPT
roduct Features
P
FUZZY logic control
A built-in load sensor automatically detects the laundry load and a
microprocessor optimizes washing conditions such as ideal WATER LEVEL
and washing time.
Advanced technology is built into the Electronic Control System which
ensures the best washing result.
Turbo drum washing (option)
When "Punch + 3" washing wings turn, the washing
tub turns in the opposite direction. This makes the both
sides current of water which improve wash-
performance by rubbing clothes strongly.
Applied models : WFT
Washer doesn't operate while the lid is open. If the lid is open during the wash,
rinse or spin cycles, the operation stops for safety.
3 Step washing
3 step washing makes the best washing performance with low tangling.
sensors
The sensor automatically detects the quantity of a Detergent put by a user and the
temperature and the quality of water to make the best washing algorithm for
washing and rinsing, which can give the best washing effect.
START
WASHING
AUTO
POWER
OFF
SENSING
Laundry Sensor
Water Level Sensor
SETTING
Optimum
Washing
Condition
Rubbing
Rubbing and
Shaking
Shaking and
Disentangling
ATTENTION :
Be sure to remove the unit from the carton base,
otherwise the machine will not be able to operate properly.
C
ontents
Introduction
Before Starting to Wash
Washing Programs
Additional Function
Program
Installation
Care and Maintenance
Troubleshooting
Terms of Warranty
Specification
Safety Information
Identification of Parts
Function Information
Preparation Before Washing
Use of Water, Detergent, Bleach and Softener
Special Guide for Stain Removal
Function of each Button
FUZZY Wash (Normal Wash)
ECONOMY Wash
JEAN Wash
WOOL Wash
DELICATE
SPEEDY SOAK Wash
FAVORITE Wash
SILENT
TUB CLEAN
DELAY START (RESERVATION) Wash
Option Washing
Other Useful Functions
Placing and Leveling
Connecting Water Supply Hose
Connecting Drain Hose
Grounding Method
Cleaning and Maintenance
Common washing problems
Troubleshooting
Terms of Warranty
Specification
4
5
6
7
8
11
12
14
14
14
14
14
16
17
18
19
20
21
22
23
24
27
28
29
31
32
33
34
READ THIS MANUAL
Inside you will find many helpful hints on how to use and maintain your washer
properly. Just a little preventive care on your part can save you a great deal of time and
money over the life of your washer. You will find many answers to common problems
in the Troubleshooting section. If you review our chart of Troubleshooting Tips first, you
may not need to call for service at all.
afety Information
S
4
Introduction
Read and follow this safety information carefully.
For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric
shock, or to prevent property damage, personal injury, or loss of life.
Save these instructions.
WARNING!
WATER HEATER
SAFETY
PROPER
INSTALLATION
YOUR
LAUNDRY
AREA
WHEN USING
THE WASHER
WHEN NOT IN
USE
• Under certain conditions hydrogen gas may be produced in a water heater that has not been
used for two weeks or more. Hydrogen gas can be explosive under these circumstances. If the
HOT water has not been used for two weeks or more, prevent the possibility of damage or
injury by turning on all HOT water faucets and allowing them to run for several minutes. Do
this before using any electrical appliance which is connected to the HOT water system. This
simple procedure will allow any built-up hydrogen gas to escape. Since the gas is flammable, do
not smoke or use an open flame or appliance during this process.
• The base opening must not be obstructed by carpeting when the washing machine is installed on
a carpeted floor.
• Install or store where it will not be exposed to temperatures below freezing or exposed to the
weather.
• Properly ground washer to conform with all governing codes and ordinances. Follow details in
Installation Instructions.
• Must be positioned so that the plug is accessible.
• Keep the area underneath and around your appliances free of combustible materials such as lint,
paper, rags, chemicals, etc.
• Close supervision is necessary if this appliance is used by or near children. Do not allow children
to play on, with, or inside this or any other appliance.
• Use this appliance only for its intended purpose as described in this Owner's Manual.
• Never reach into washer while it is moving. Wait until the machine has completely stopped
before opening the lid.
• Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover. Mixing
different chemicals can produce a toxic gas which may cause death.
• Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted with
combustible or explosive substances (such as wax, oil, paint, gasoline, dry-cleaning solvents,
kerosene, etc.) which may ignite or explode. Do not add these substances to the wash water. Do
not use or place these substances around your washer or dryer during operation.
• The laundry process can reduce the flame retardancy of fabrics. To avoid such a result, carefully
follow the garment manufacturer's wash and care instructions.
• To minimize the possibility of electric shock, unplug this appliance from the power supply or
disconnect the washer at the household distribution panel by removing the fuse or switching off
the circuit breaker before attempting any maintenance or cleaning.
NOTE: Pressing Power button to turn off does NOT disconnect the appliance
from the power supply.
• Never attempt to operate this appliance if it is damaged, malfunctioning, partially disassembled,
or has missing or broken parts, including a damaged cord or plug.
• Turn off water faucets to relieve pressure on hoses and valves and to minimize leakage if a break
or rupture should occur. Check the condition of the fill hoses; they may need replacement after 5
years.
• Before discarding a washer, or removing it from service, remove the washer lid to prevent
children from hiding inside.
• Do not attempt to repair or replace any part of this appliance unless specifically recommended in
this Owner's Manual, or in published user-repair instructions that you understand and have the
skills to carry out.
• Do not tamper with controls.
I
dentification of Parts
5
Introduction
WATER SUPPLY
HOSE
Make sure the water
does not leak.
POWDER DETERGENT
BOX FOR DELAYED
WASHING
INLET HOLE FOR
BLEACH
Softner will automatically
flow into the tub.
SOFTENER
INLET
TUB
BASE
ADJUSTABLE LEGS
Use to level the washing
machine for correct balance
& spin operation.
Check if the drain hose
is hung up before
operating the
washing machine.
DRAIN HOSE
for pump model
DRAIN HOSE
for non pump model
POWER PLUG
If the supply cord is
damaged, it must be
replaced by the
manufacturer
or its service agents
or similarly qualified
person in order to
avoid a hazard.
LINT FILTER
Clean regularly to stop
linting on the clothes
load.
START/PAUSE
BUTTON
Use to start or stop the
washing machine
temporarily.
Drain hose Anti-rat cover (option)
Water supply hoses
or
or
or
1 Each for COLD and
HOT water
Body
Accessories
Part can be different according to the model.
Note
unction Information
F
6
Introduction
Our machine provides various washing methods which suits various conditions and
types of laundry.
FUZZY(Normal) Wash
JEAN Wash
WOOL Wash
ECONOMY Wash
SPEEDY SOAK Wash
DELAY START Wash
OPTION WASH
Use this Program for everyday washing e.g. sheets, towels, T-shirts.
(refer to page 14)
DELICATE Wash
Use this program to wash DELICATE and washable laundries.
(refer to page 14)
FAVORITE Wash
This setting allows you to store your FAVORITE wash conditions in the normal cycle memory.
(refer to page 17)
SILENT Wash
Use this program to wash quietly at night.
(refer to page 18)
Use this Program for heavily soiled durable garments e.g. overalls, jeans.
Thick and heavy clothes or those which are excessively dirty like jeans or working uniforms can be washed. (refer to page 14)
Delicate clothes (lingerie, wool, etc.) which may be easily damaged can be washed. (refer to page 14)
The fibers of machine washable woolens have been specifically modified to prevent felting when they are machine washed.
Most handknitted garments are not made of machine washable wool and we recommend that you hand wash them
Before washing your woolens check the care label for the washing instructions.
When washing woolens use a mild Detergent recommended for washing wool.
Hand washed woolens may be spun in a washing machine to reduce the time they take to dry.
To dry woolens lay down them flat on a towel and pat into shape. Dry woolens out of direct sunlight.
(The heat and tumble action of a dryer may cause shrinkage or felting of woolen garments.)
Some wool underlays and sheepskin products can be washed in a washing machine but may cause pump blockages.
(Ensure that the whole article is suitable for machine washing and not just the backing material.)
You may wish to handwash these articles and place them in the machine to spin dry.
ECONOMY wash can be selected to wash lightly soiled clothes of less than 2.0 kg in a short time.
(refer to page 14)
SPEEDY SOAK Wash is designed to maximize washing performance and can be selected to wash heavily
soiled laundry with FUZZY or Jean Program.
(refer to page 16)
DELAY START Wash is used to delay the finishing time of the operation.
The number of hours to be delayed can be set by the user accordingly.
(refer to page 20)
When the user needs only SPIN, RINSE/SPIN, RINSE, WASH/RINSE, WASH, WASH/RINSE/SPIN,
SPEEDY SOAK/WASH/RINSE/SPIN.
(refer to page 21)
WASH OPTION
One or more WASH OPTIONS can be selected for FUZZY and JEAN washing program.
(refer to page 22)
TUB CLEAN
Use this program to clean the inside of washing machine especially Inner tub & Outer tub .
(refer to page 19)
Washing according to the condition of laundry
Other washing method
Different types of laundry washing
P
reparation Before Washing
7
Before Starting to Wash
Check all pockets to make sure that they are empty. Things such as nails, hairclips, matches,
pens, coins, and keys can damage both your washer and your clothes.
Mend any torn garments or loose buttons. Tears or holes may become larger during washing.
Remove belts, underwires, etc. to prevent damage to the machine or your clothes.
Pretreat any dirt and stains.
Make sure the clothes are washable in water.
Check the washing instructions.
Remove tissue in pockets.
To get the best results, different fabrics need to be washed in different ways.
SOIL (Heavy, Normal, Light)
Separate clothes according to the type and amount of soil.
COLOR (Whites, Lights, Darks) Separate white fabrics from colored fabrics.
LINT (Lint producers, Collectors) Separate lint producers and lint collectors.
Lint Producers Terry cloth, Chenille, Towels, Nappies, Diapers
Lint Collectors Synthetics, Corduroy, Permanent Press, Socks
WIRE
Sorting
Check before Loading
* Look for a care label on your clothes. This will tell you about the fabric content of your garment
and how it should be washed.
Sort clothes into loads that can be washed with the same wash cycle, Water Temperature and spin speed.
Care Labels
Use nylon nets for long, DELICATE items. For laundry with long strings or long length , a net will prevent
tangling during washing.
Fasten zippers, hook, and strings to make sure that these items don't snag on other clothes.
Nylon net is not supplied by LG.
Clothes like downs and woollens are light weight, large and float easily. Use a nylon net and
wash them in a small amount of water. If the laundry floats during the wash cycle, it may
become damaged. Use dissolved Detergent to prevent the Detergent from clumping.
Light and Large-sized clothing
Long laundry items
Do not wash fabrics containing flammable materials (waxes, cleaning fluids, etc.).
Load Size
The WATER LEVEL should just cover the clothes. Adjust the load size
accordingly. Loosely load clothes no higher than the top row of holes in the
washer tub. To add items after washer has started, press Start button and
submerge additional items. Close the lid and press Start button again to restart.
Loading
Pretreat shirt collars and cuffs with a pre-wash product or liquid Detergent when placing them in the washer.
Before washing treat special stains with bar soaps, liquid Detergent or a paste of water and granular Detergent.
Use a pretreat soil and stain remover.
Treat stains AS SOON AS POSSIBLE. The longer they are left the harder they are to remove.
(For more detail refer to page11)
Pretreatment on stains or heavy soil
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable
fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type
of oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING
8
Before Starting to Wash
se of Water, Detergent, Bleach and Softener
U
The temperature of the water impacts the effectiveness of all laundry additives and therefore, the cleaning results.
We recommend temperatures of:
- HOT 49~60°C(120-140˚F) White items, diapers, underclothing and heavily soiled, colorfast items.
- WARM 29~40°C(85-105˚F) Most items
- COLD* 18~24°C(65-75˚F) Only very bright colors with light soil.
When washing in COLD water additional steps may be needed:
- Adjust Detergent amount and pre-dissolve Detergent in WARM water
- Pretreat spots and stains
- Soak heavily soiled items
- Use appropriate bleach
* Temperature below 18°C(65˚F) will not activate laundry additives and may cause lint, residue, poor cleaning, etc.
In addition, Detergent manufactures and care labels define COLD water as 26~29°C(80-85˚F).
If the temperature of the water in the tub is too cold for your hands, the Detergent will not activate and clean
effectively.
Using Detergent
Detergent
Follow the Detergent package directions. Using too little Detergent is a common cause of laundry problems.
Use more Detergent if you have hard water, large loads, greasy or oily soils or lower Water Temperature.
Choosing the right Detergent
We recommend the use of domestic Detergent, (powder, liquid or concentrated). Soap flakes or
granulated soap powders should not be used in your washing machine. When washing woolens
remember to use Detergent suitable for washing woolens.
Water Temperature
Using Water
The machine sets the appropriate temperature automatically according to the wash program .
You can change the Water Temperature by pressing the WATER TEMP. button. (refer to page 12)
This machine detects the quantity of laundry automatically, then sets the WATER
LEVEL and proper amount of Detergent.
When you select a wash program, the WATER LEVEL and amount of Detergent
(to be used) will be shown on the control panel.
The following table shows the amount of water.
When the WATER LEVEL is automatically detected, it may differ depending on the quantity of laundry
even though the same WATER LEVEL is indicated on the control panel.
The amount of a cup in the diagram is about 40g for concentrated Detergent.
Amount of WATER LEVEL
Attention
If iron is present in the water the clothes may become an all-over yellow or they may be stained with brown
or orange spots or streaks. Iron is not always visible. Installation of water softener or an iron filter may be
necessary for severe cases.
9
Before Starting to Wash
Using Detergent
How much Detergent
When you select a wash program the WATER LEVEL and the amount of Detergent (to be used) will be
shown on the control panel. The amount of a cup in the diagram is about 40g for concentrated Detergent.
The correct amount of Detergent will vary depending on the amount of soil in your clothes (Jeans and work
cloches may need more Detergent, while bath towels usually need less.).
For liquid and concentrated Detergents, follow the recommendations of the Detergent manufacturer.
Note: To check you are using the correct amount of Detergent, lift the lid of your machine about half-
way through the wash. There should be a thin layer of foam over the surface of the water. Lots of
foam may look good, but it does not contribute to cleaning your clothes. No foam means not enough
Detergent has been used; soil and lint can settle back on the clothes or the washing machine.
If excess Detergent is used, the rinse will not be as clean and efficient. Also, it could cause
environmental pollution, so use it accordingly.
D nde
deposita el
detergente
Dispensador de detergente en polvo.
Adding the Detergent
Open the Detergent dispenser and deposit the appropriate
amount of Detergent
where you deposit the Detergent
Powder Detergent dispenser.
Some Detergents MUST be fully dissolved before
adding to your machine to get the best wash results.
Check the instructions on the Detergent packet.
If you use powdered Detergent it is essential that the required amount be fully dissolved in very HOT water
before being added to WARM or HOT water for the actual wash.
Pre-dissolving Detergent in WARM water when washing in COLD water can improve its performance.
Where you
deposit the
Detergent
Powder Detergent Box
( )
Check clothing care label for special instructions and separate the
laundry to be bleached
Dilute liquid chlorine bleach.
Measure the recommended amount of liquid bleach carefully
following instructions on the bottle.
Before starting the washer, pour measured amount of bleach directly
into bleach dispenser. Avoid splashing or overfilling. Powdered
bleach should be mixed with water before pouring.
Using Liquid Bleach
Bleach dispenser
( )
Attention
Never pour undiluted liquid bleach directly onto clothes or into the wash basket.
This may cause change of color or damage the laundry.
Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover. Mixing can reduce
a toxic gas which may cause death.
Do not pour powdered bleach into bleach dispenser.
se of Water, Detergent, Bleach and Softener
U
10
Before Starting to Wash
Using Fabric Softener
If you wish to use fabric softener we recommend
Attention
Do not mix with Detergent or bleach.
Never pour fabric softener directly on clothes. It may stain them.
Do not stop the washer during the first spin for timely dispensing.
Option washing is not designed to be used with fabric softener dispenser.
Dilute fabric softener with water.
Undiluted fabric softener may result in spots that look like oil
stains.
Measure and add the recommended amount of fabric softener
into the compartment marked with this symbol( ).
Follow manufacturers direction.
F Fabric softener is automatically dispensed in the final rinse
with indication beep.
F If you want EXTRA RINSE, you must add fabric
softener manually when indication beep rings in the final
rinse. This maximize the fabric softener function.
Do not overfill. The dispenser hold max 35mL.
Never add more than 35mL.
Overfilling can cause early dispensing of the fabric softener
which could result in stained clothes. A cup with a pouring spout will help you avoid spilling.
The effect of adding fabric softener may vary according to its viscosity. The stickier fabric softener makes its
effect the lower. For a sticky fabric softener it is recommended that it be diluted with water, then be manually
put during the time when the washer beeps several times before the final rinse. This function informing
correct time to dispense manually is optionally applied to some models. Please keep it in mind that fabric
softener has to be diluted with water before dispensed and never poured directly on clothes.
Scrud(Waxy Build up)
Softener dispenser ( )
or
Scrud is the name given to the waxy build-up that can occur within any washer when the fabric softener
comes into contact with Detergent. This build-up is not brought about by a fault in the machine.
If scrud is allowed to build-up in the machine it can result in stains on your clothes or an unpleasant
smell in your washer.
Using fabric softener sparingly.
When filling the dispenser, do not splash or overfill.
Clean dispenser as soon as the cycle is finished.
Clean your machine regularly. (refer to page 19 or 30)
Cold water washing increases the chance of this build-up occurring. We recommend a regular WARM or
HOT wash e.g. every 5th wash should be at least a warm one.
Fabric softener of thinner consistency is less likely to leave residue on the dispenser and contribute to a
build-up.
S
pecial Guide for Stain Removal
11
Before Starting to Wash
Remove stains promptly.
Determine the kind of stain, then follow the recommended treatment in the stain
removal chart below.
To pretreat stains, use a prewash product, liquid Detergent, or a paste made from
granular Detergent and water.
Use COLD water on unknown stains because HOT water can set stains.
Check care label instructions for treatments to avoid on specific fabrics.
Check for colorfastness by testing stain remover on an inside seam.
Rinse and wash items after stain removal.
For successful stain removal:
Follow fabric care label
instructions
Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or
products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.
To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:
Read and comply with all instructions on stain removal products.
Keep stain removal products in their original labeled containers and out of childrens reach.
Thoroughly wash any utensil used.
Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.
Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning solvents
or other flammable or explosive substances because they give off vapors that could ignite or explode.
Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or sparks.
WARNING
Stain Removal
STAIN
Adhesive tape, chewing gum,
rubber cement
Baby formula, dairy products, egg
Beverages (coffee, tea, soda, juice,
alcoholic beverages)
Blood
Candle wax, crayon
Chocolate
Collar or cuff soil, cosmetics
Dye transfer on white fabric
Grass
Grease, oil, tar (butter, fats, salad
dressing, cooking oils, car grease,
motor oils)
Ink
Mildew, scorch
Mud
Mustard, tomato
Nail polish
Paint, varnish
Rust, brown or yellow
discoloration
Shoe polish
Apply ice. Scrape off excess. Place stain face down on paper towels. Saturate with prewash stain remover or
nonflammable dry cleaning fluid.
Use product containing enzymes to pretreat or soak stains.
Pretreat stain. Wash using COLD water and bleach safe for fabric.
Rinse with COLD water. Rub with bar soap. Or pretreat or soak with product containing enzymes. Wash using
bleach safe for fabric.
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is absorbed.
Replace paper towels frequently. Treat remaining stain with prewash stain remover or nonflammable dry cleaning
fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Pretreat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.
Pretreat with prewash stain remover or rub with bar soap.
Use packaged color remover. Wash using bleach safe for fabric.
Pretreat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply
nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly. Wash
using hottest water safe for fabric.
Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover, denatured
alcohol or nonflammable dry cleaning fluid.
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and HOT water before washing. Badly
mildewed fabrics may be permanently damaged.
Brush off dry mud. Pretreat or soak with product containing enzymes.
Pretreat with prewash stain remover. Wash using bleach safe for fabric.
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of stain.
Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
WATER BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed,
OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing.
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate Detergent and
nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
LIQUID : Pretreat with a paste of granular Detergent and water. PASTE : Scrape residue from fabric. Pretreat with
prewash stain remover or nonflammable dry cleaning fluid. Rub Detergent into dampened area, Wash using bleach
safe for fabric.
TREATMENT
12
Before Starting to Wash
F
unction of each Button
Note
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by
8minutes at maximum and decreased by 4 minutes at maximum.
* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically
adds rinsing, and the remaining time may be increased.
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a
liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.
* Because
TUB CL
* Even if
the sens
* The con
WATER TEMPERATURE BUTTON (OPTION)
DELAY START (RESERVATION) BUTTON
Use to set a delayed finishing time.
The time increases when the button
is pushed.
The following settings are indicated
as the button is pushed 3 4 5
...11 12 14 16 ...46 48
3 HOUR.
To cancel delay time, turn the power
switch off.
(refer to page 20)
WATER LEVEL BUTTON
(INDICATION OF DETERGENT AMOUNT)
Use to adjust the WATER LEVEL as required. The appropriate amount of
Detergent is shown next to the WATER LEVEL in the WATER-
DETERGENT diagram
WATER LEVEL is automatically selected for FUZZY (normal) program.
The following settings are indicated as the button is pushed
LARGE LARGE
.
EX-LARGE EX-LARGE SMALL
SMALL
MEDIUM MEDIUM MEDIUM LARGE LARGE
Use to select Water Temperature.
Pressing the button allows you to select
COLD WARM (HOT&COLD)
HOT COLD respectively.
Default setting is COLD.
WASHING CONDITION INDICATOR
It only operates in FUZZY Program.
During being detected by the sensor, the LED flashes green, orange
and red in turn. And, after detecting, the LED lights a specific color
according to the detecting condition as follows:
If the current washing condition (Detergent quantity, Water
Temperature, water quality, etc.) is determined as better than the
standard one, it optimizes the algorithm to save the energy by
decreasing washing time/strength, and the LED automatically turns
to red.
If the current washing condition is determined as worse than the
standard one, it optimizes the algorithm by increasing washing
time/strength, and the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard
one, the algorithm has no change and the LED turns to green.
WASH OPTION BUTTON(OPTION)
According to kinds of
laundry, soiled extent or
washing habit you can
select suitable WASH
OPTION manually.
By pressing the button
WASH OPTION is
changed.
(refer to page 22)
13
Before Starting to Wash
* Because the detecting ability of the sensor may be decreased by using it for a long time, periodically use
TUB CLEAN course to clean the tub. (refer to page 19)
* Even if the water level or the water temperature are changed by the user in FUZZY(Normal) Program,
the sensor will still work. The sensor algorithm may differ according to models.
* The control panel may differ according to different models.
TIME LEFT, DELAY START (RESERVATION), ALARM INDICATION
• Time left - During operation, the remaining time is indicated.
• DELAY START INDICATION (RESERVATION) - When
DELAY START (RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)
• Alarm indication -When an error occurs, an error message
appears to indicate the abnormality. For example, indicates
that the lid is open.
CHILD LOCK FUNCTION
Use to lock or unlock the control
buttons to prevent settings from
being changed by a child.
To lock, push the PROCESS and
PROGRAM buttons
simultaneously and to unlock
push them one more time during
the washing process.
(refer to page 22)
START/ PAUSE BUTTON
Use to start or pause the
washing process.
Repeats start and pause by
pushing the button.
PROCESS BUTTON
Use to select
SPEEDY SOAK,
Wash, Rinse and Spin
functions as desired.
AUTO OFF
(POWER) BUTTON
Use to turn the power on or
off.
Push again and power goes
on or off
The power goes off
automatically about 10
seconds after the wash is
finished.
PROGRAM BUTTON
Use for selecting wash program.
This button allows you to select 4
different programs for different kinds of
laundry and dirtiness.
program selections light up in sequence as
follows: FUZZY (NORMAL)
DELICATE ECONOMY JEAN
WOOL SILENT FAVORITE
TUB CLEAN FUZZY
(NORMAL)
etc. Select the desired program by
pressing the button.
PEEDY SOAK Wash
S
16
Washing Programs
Use this mode to wash normal clothes or thick and heavy clothes which are excessively dirty.
SPEEDY SOAK mode can be used with FUZZY or JEAN program.
SPEEDY SOAK will not work in WOOL and
ECONOMY, DELICATE Program.
The WATER LEVEL and the amount of Detergent to be
used will be shown and water will be supplied.
Press the AUTO OFF (POWER) button to turn power on.
Press the PROGRAM button to select the washing program.
Add the laundry and press the START/PAUSE button.
When the wash program ends, the buzzer will ring for
10seconds before the Power goes off automatically.
Finish
Keep pressing the PROCESS button until the SPEEDY SOAK
light is on and then Wash, Rinse, Spin lights are on
simultaneously.
Until the washing process is completed, the SPEEDY SOAK
light is on.
The appropriate quantity of Detergent marked next to the
WATER LEVEL of WATER-DETERGENT.
Add the Detergent.
Water will be supplied for 2 minutes after the start of the
wash to supplement the absorbed water by the laundry.
Close the lid.
1
3
4
5
6
2
F
AVORITE Wash
17
Washing Programs
Pressing the FAVORITE button allows you to store your FAVORITE wash conditions in the
normal cycle memory and then recall it for use at a later time.
Press the WATER TEMP. button to select wash Water
Temperature.
Press the WATER LEVEL button to select
WATER LEVEL.
Press the WASH OPTION to select WASH OPTION.
Press the PROCESS button to select PROCESS(WASH,
RINSE, SPIN) respectively you want to store.
Press the AUTO OFF (POWER) button to turn power on.
Select the FAVORITE program.
Select your FAVORITE wash conditions.
Press the START/PAUSE button to store & start your FAVORITE wash cycle.
Power turns off automatically after wash.
1
2
3
4
Note
To recall your FAVORITE cycle.
1. Press POWER on.
2. Select the FAVORITE cycle by pressing the PROGRAM.
3. Press the START/PAUSE button. Then the wash cycle starts.
T
UB CLEAN
19
Additional Function Program
If scrud is allowed to build-up in the machine it can result in stains on your clothes or unpleasant smell in
your washer.
Scrud is the way build-up that can occur within any washer when the fabric softener comes into contact
with Detergent, and according to particular degree of dirtiness or quality of water to be use,
in these case, use this program to clean inner tub and outer tub.
Press the POWER button to turn power on.
Press the PROGRAM button to select the TUB CLEAN program.
After 10 minutes of water supplement. Add the oxygenated bleach (about 300m ).
Press the START/PAUSE button.
Close the lid.
1
3
4
5
2
Note
Before using this program remove lint inside lint filter.
When using this program, do not place any laundry inside tub.
This program takes about 3 hours to be completed.
After using this program, remove dirt inside filter.
After finishing this program, open the lid of wash to remove irritant odor.
Do not pour bleach into the tub directly. It might cause damage the tub.
Do not leave diluted oxygenated bleach inside tub for long time.
It rusts the tub must drain the remained diluted oxygenated water out.
Use this program once for every month.
Do not use this program repeatedly.
Ex-Large WATER LEVEL is set automatically.
When the lid is open the machine will not operate, and an
alarm signal will remind you to close the lid.
Left time is displayed.
Do not use Detergent box.
Do not place any laundry inside tub.
ELAY START (RESERVATION) Wash
D
20
Additional Function Program
3
DELAY START (RESERVATION) Wash is used to delay the finishing time of the
operation. The hours to be delayed can be set by the user accordingly.
The time on the display is the finishing time , not the start time.
When you press the START/PAUSE button the light will
blink.
Select the program for laundry on the Control panel.
This program will not work in WOOL and DELICATE
Program.
How to set the delay time.
Example : It' 7 a.m. now. If you'd like your wash to finish at 9
p.m. set the time as in the figure below.
When you push the button the reservation time changes
3 u 4 u5 u...12 u 14 u 16 u...u 48 u 3 repeatedly.
Press the POWER button to turn power on.
Press the PROGRAM button to select the washing program.
Add the laundry and press the START/PAUSE button.
Press the DELAY START (RESERVATION) button to set the time when the
delayed washing is to be completed.
The appropriate quantity of Detergent marked next to the
WATER LEVEL of WATER DETERGENT.
When the lid is open the machine will not operate, and an
alarm signal will remind you to close the lid
Add the Detergent.
Water will be supplied for 2 minutes after the start of the
wash to supplement the water the laundry has absorbed.
Close the lid.
The washing will be finished according to the delayed time.
To select washing program, spinning time, WATER LEVEL or HOT/COLD manually, press the DELAY
START (RESERVATION) button and select the desired option. Then press the START/PAUSE button.
Finish
When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the
spinning program . (The laundry will be wrinkled if left for a long time after spinning.)
Note
If the lid is open, the machine will not work, and an alarm signal will alarm to remind you to close the lid.
1
2
4
5
6
(RES.=DELAY)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69

LG WFT85B30EPT Instrukcja obsługi

Kategoria
Pralki
Typ
Instrukcja obsługi

w innych językach