Novus NVR-4532-H4/F-II Instrukcja obsługi

User’s manual

N CONTROL 4000

2

N Control 4000 User’s manual version 1.0

TABLE OF CONTENTS

TABLE OF CONTENTS ...................................................................................... 2

1. FOREWORD INFORMATION ...................................................................... 3

1.1. Main characteristics ..................................................................................... 3

1.2. Hardware requirements ............................................................................... 3

2. INSTALLATION AND LAUNCHING SOFTWARE ................................... 4

2.1. Installation of the software .......................................................................... 4

2.2. Software startup ........................................................................................... 6

2.3. Login window .............................................................................................. 6

2.4. Record parition settings ............................................................................... 8

2.5. Application interface ................................................................................... 9

2.6. Server processes ........................................................................................ 11

3. BASIC FUNCTIONALITY SUPPORT ........................................................ 12

3.1. Device adding ............................................................................................ 12

3.2. Change the dvice’s IP address ................................................................... 14

3.3. Manually adding a device ......................................................................... 14

3.4. Adding devices to the zone ....................................................................... 15

3.5. Removing a dvice from the list. ................................................................ 15

4. DISPLAYING IMAGES FROM DEVICES ................................................ 16

4.1. Live view .................................................................................................. 16

4.2. Records playback ...................................................................................... 19

4.3. Copying recordings from the playback window ....................................... 21

4.4. Copying recordis to the remote device ..................................................... 22

5. Line Crossing Counting .................................................................................. 23

5.1. Configuration ot the line crossing counter in the N Control 6000 soft, .... 23

5.2. Setting an operation schedule in the N Contorl 60000 software ............... 24

5.3. Real-time Statistics .................................................................................... 26

5.4. Sumaery Statistics ..................................................................................... 27

5.5. Historical Statistics .................................................................................... 28

N Control 4000 User’s manual version 1.0

3

FOREWORD INFORMATION

1. FOREWORD INFORMATION

1.1. Main characteristics

• Software for operating and managing NOVUS 4000 series NVRs, NHDRs and IP cameras.

• Group device management;

• Remote configuration of devices;

• Multiscreen environment;

• Flexible camera layouts

• Site maps features;

• Advanced user account settings;

• Local recording and playback of recordings;

• Support for alarm event scenarios;

• Configuration and management of advanced image analysis functions, e.g. face recognition

and others.

1.2. Hardware requirements

Below are the requirements for the specification of the computer unit for the N Control 4000 software:

1. Intel Pentium4 [email protected] GHz CPUor higher.

2. RAM memory 4GB DDR4 ECC or higher.

3. OS: Microsoft Windows 7/8.1/10 (32/64 bit)/ Windows Server 2008 (64 bit) / MacOS 11.6 or

higher .

4. 100/1000 Mb/s network card.

5. RADEON X700 Series 256MB Graphics Card or better.

6. . Minimum 500 GB SATA hard drive.

4

N Control 4000 User’s manual version 1.0

INSTALLATION AND LAUNCHING OF THE SOFTWARE

2. INSTALLATION AND LAUNCHING OF THE SOFTWARE

2.1. Installation of the software.

Download N Comtrol 4000 from www.novuscctv.com and save it on the local drive. Run the software

to begin the installation. Setup windows is displayed (as shown below). In the next installation steps,

the following windows will appear:

• software installation path (default path is C:\Program Files (x86)\NOVUS\N Control 4000)

• software shortcut location in the Start Menu

N Control 4000 User’s manual version 1.0

5

INSTALLATION AND LAUNCHING OF THE SOFTWARE

• adding a shortcut to desktop or menu bar

• summary of selected settings

The Install button will start the installation process.

6

N Control 4000 User’s manual version 1.0

INSTALLATION AND LAUNCHING OF THE SOFTWARE

After the operation is completed, the following window will appear confirming successful installation.

If the Launch N Control 4000 option is selected, the program will start automatically just after

Finish button is clicked.

2.2. First launch

The first time the N Control 4000 software is launched, you must define a supervisor password.

N Control 4000 User’s manual version 1.0

7

INSTALLATION AND LAUNCHING OF THE SOFTWARE

Enter the password in the Password field. It can contain uppercase and lowercase letters, numbers and

special characters. The Password Strength line shows information about the password strength while

typing. It is displayed in the form of a color:

• red - the password is weak

• yellow - the password is medium

• green - the password is strong

The password must contain at least 8 characters.

To confirm, enter the password again in the Confirm Password field.

If the Auto Login After Registration checkbox is marked, the software will not require password

authentication when starting up.

After pressing the Next button, a window appears where you must select 2 security questions and

define the answers - knowing these answers will allow you to define new password if you lose the old

one.

The Finish button will complete the first login process and the login window will appear. This

window also appears every time you start the software.

N Control 4000 User’s manual version 1.0

8

2.3. Running the software.

The N Control 4000 software can be launched by clicking on the N Control 4000 icon on the desktop,

in the Menu bar, in the place defined during installation in the Start Menu or in the installation

directory (the default path is C:\Program Files (x86)\NOVUS\N Control 4000)

2.4. Login window

After launching the software, a login window will appear.

In the left part of the window, you can select the login mode. The Account Login mode is shown by

default, which allows users defined on the computer to log in (only admin at the beginning), which

can manage multiple devices.

In the upper part of the window, select a user and enter his password. If you check the Remember

Password box, the user's password will be remembered on the computer, you will not have to type it

the next time you log in. By checking the Auto Login box, the login window will not appear at the

next startup - the login process for this user will be automatic. The Login button will log the user in.

At the bottom, the Forgot Password? allows to redefine the administrator password using security

questions defined at the first launch (see chapter 2.2).

INSTALLATION AND LAUNCHING OF THE SOFTWARE

N Control 4000 User’s manual version 1.0

9

Device Login mode allows to log in to a single device. In this mode, you do not need to set up an

account on the computer. You just log in to the account set up on the camera or recorder, you want to

connect.

It is required to provide the IP address of the device or P2P ID code, HTTP port set on the recorder (by

default port 80), username and password. If you check the Remember Password box, the user's

password will be remembered on the computer, you will not have to enter it the next time.

This mode has limited functionality. The next part of this manual describes the full functionality menu

after logging in the Device Login mode.

INSTALLATION AND LAUNCHING OF THE SOFTWARE

N Control 4000 User’s manual version 1.0

10

2.5. Main menu

After starting the software and logging in to the user account, the main menu appears.

The following parts can be distinguished on the screen:

 Icons of open software tabs for quick navigation between them. The first „house” icon is

responsible for the main menu.

 Icons of window resolution, switching between users, video player launch, and the standard

minimize, maximize, and close window icons.

 Current time, date and PC CPU load level.

 Operation icons activating the relevant tabs - live view, remote playback, local playback, log

search, AI event search, AI data analysis.

 Configuration icons enabling the relevant tabs - devices management, alarm configuration,

cruise settings, user accounts, recording locations, file management, system configuration, e-

map, AI configuration.

 Alarm bar displaying of alarm events.

INSTALLATION AND LAUNCHING OF THE SOFTWARE

N Control 4000 User’s manual version 1.0

11

2.6. Language change

In order to change the software language, enter the system configuration. Press the System config icon

in the main menu.

The settings window will open (the appropriate icon will be visible in the upper bar), the General tab.

The default language is English. After pressing this field, a list of languages is displayed. Select the

language you are interested in and save the change using the Save button in the lower right corner.

Note! The language of the software will change on software restart. Close the program with a

cross in the upper right corner of the window and restart it.

INSTALLATION AND LAUNCHING OF THE SOFTWARE

12

N Control 4000 User’s manual version 1.0

BASIC FUNCTIONS

3. BASIC FUNSTIONS

3.1. Adding devices

To add a device, select Device Management in the Main Menu. A menu opens where we can add or

remove devices.

In the upper right corner there are icons that allow to perform basic actions:

After pressing the icon, the device adding window will appear.

- exporting the list of devices to an .xml file.

- importing a list of devices from an .xml file.

- adding devices

- delete selected devices

N Control 4000 User’s manual version 1.0

13

BASIC FUNCTIONS

Fill the specified fields:

• device name helpful for the operator;

• login type - IP address or P2P ID;

• IP address or ID number - according to the type selected in the previous field;

• connection protocol - Private for Novus 4000 series cameras and recorders, Onvif for other

devices;

• device http port number;

• username on the device;

• user's password.

Press the Add button to confirm the data and the device appears on the list of devices.

After adding all devices, the table shows a list of devices with their names, IP addresses, device type

(IP camera, NHDR or NVR), connection protocol, device firmware version, connection status (green

mark means correct connection, gray means no connection), number port number, number of

channels, P2P ID number.

There are checkboxes on the left side that allow to select group of devices. There are icons on the right

side to make operations on single device:

- changing connection parameters with the device.

- device configuration. It allows to configure all device parameters in the same way as con-

necting to the device via a web browser.

- removing the device

14

N Control 4000 User’s manual version 1.0

BASIC FUNCTIONS

Another way to add devices is to choose the Auto Search tab.

Select the protocol type and press the Search button. All devices in the LAN will be displayed. In

case of a large number of devices, you can limit the range of IP addresses using the Filter button.

The table in which the devices are displayed has the same columns as the list of added devices

described on the previous page. The Operation column is added at the end, which allows to add a

device using the + icon (in this case, enter the username and password) or using the pencil icon (you

can also edit the device's network parameters there). The last column contains checkboxes, which

allow to select a group of devices, and then use the Add button to connect them all at once (typing a

common username and password).

N Control 4000 User’s manual version 1.0

15

BASIC FUNCTIONS

3.2. Creating user accounts

If the N Control 4000 software is used by more than one person, it is recommended to create separate

user accounts. Select the Account Management icon in the main menu,

A window with a list of users will open. Initially, there is only the admin user.

Additional users can be added using the + icon in the upper right corner.

16

N Control 4000 User’s manual version 1.0

BASIC FUNCTIONS

Enter the username and define its password in the user adding window. Then, define its Basic Rights

(concerning software functions), Channels to which it is to have access (devices must be added

before) and Channel Rights (e.g. rights to watch "live", play records, download records, PTZ control,

etc.). After creating the user, it will appear in the list of users.

3.3. Main view

To watch the live view of connected channels, select the Main View icon in the main menu.

A window with a division will appear, to which you can freely assign a channel view. In the left part

there is a tree of connected devices. By expanding each of them, you can get a list of streams that can

be assigned to the right place by dragging onto the view window.

N Control 4000 User’s manual version 1.0

17

BASIC FUNCTIONS

In the lower right corner there are auxiliary fields:

• aspect selection box - original image, stretched, 4:3, 16:9

• screen split selection - you can choose one or define your own divisions

• floppy disk icon to save the defined view

• enable full screen view. To exit it, press the Esc button on the keyboard or press the right mouse

button and turn off full-screen mode.

• icon to enable the display of intelligent video analysis events configured in connected devices.

Views saved using the floppy disk icon can be quickly activated by switching to the next tab using the

icon located in the upper left corner.

NOTE! The N Control 4000 software allows to enable multiple views at once. The icon in the

upper bar has a number and a small + sign that allows to open another window. Having several

views open, you can grab them with the left mouse button and move them to another monitor as

a separate window. Each of these windows can be individually configured, switched to full-

screen mode, etc.

The icon next to it enables the PTZ camera control panel.

By hovering over the image from individual channels, a bar with icons appears at the bottom of the

window, allowing you to perform operations for a selected channel. The number and types of icons

depend on the connected camera.

In the example above, there are icons that allow to make a snapshot, enable video recording on the

computer, digital zoom, enable conversation (only if the camera has an audio output), mark the place

with a tag, play the last 10 minutes of recording from the camera (only if it is on currently being

recorded).

18

N Control 4000 User’s manual version 1.0

BASIC FUNCTIONS

3.4. Remote playback

The N Control 4000 software enables playback of video recordings made on recorders. To do this,

select the Remote playback icon in the main menu.

A window will open where you can distinguished the following parts:

1. Recordings search mode - the first icon is responsible for playing video recordings, the second one

for browsing photos, the third one for browsing recordings marked with tags.

2. Tree of connected devices. All connected devices are here, whether they have recordings or not

(e.g. directly connected cameras). Select the channels you want to play records.

3. Device search field - in the case of a large system, you can search for individual channels using

their names.

4. Defining the video stream (main or secondary), recording type (all, alarm, triggered by the

intelligent analysis function - using the button, you can indicate a specific event) and the time

period.

After defining these parameters, press the Search button.

5. Windows for displaying records from selected channels.

6. Navigation buttons to control playback.

7. Timeline displaying the time and type of recordings, allowing to jump to the appropriate time of

records.

N Control 4000 User’s manual version 1.0

19

BASIC FUNCTIONS

In order to find the appropriate event and play the record, use the procedure below:

1. Select the channels of interest for playback in the tree of connected devices (part 2 of the window).

2. Select the stream type, recordings and time period (part 4 of the window).

3. Press the Search button.

4. On the timeline, click on the axis of recordings of a particular channel (part 7 of the window). In the

upper right corner of the timeline there are + and - icons that allow to change the time range on the

axis.

5. Use the navigation buttons to control the playback, download the appropriate record.

Downloading recording files from the recorder for the selected channel

Synchronization of playing channels (to do this, you must first stop all playing channels)

Pause. When pressed, the icon changes to the play icon.

Marking the selected fragment of recordings for download. In place of this icon, a floppy disk

icon appears that saves the selected recording interval on the disk.

Stop playback.

Reverse playback. Pressing again will increase the reverse speed.

Slow playback. Pressing again will decrease the playback speed.

Quick play. Pressing again will increase the playback speed.

Moves the recording forward one frame.

Enables audio playback.

Smart Search

Plays all channels.

Stops all channels from playing.

Opens the panel for fisheye cameras.

Changing the division of the playback screen.

Enable full screen view. To exit it, press the Esc button on the keyboard or press the right mou-

se button and turn off full-screen mode.

2023-07-04 PF

AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.

431 Pulawska St., 02-801 Warsaw, Poland

tel.: +4822 546 0 546, [email protected]

www.novuscctv.com

Strona jest ładowana ...

Novus NVR-4532-H4/F-II Instrukcja obsługi

Novus NVR-4532-H4/F-II Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty