Ingo Hello Kitty HEC050N Instrukcja obsługi

Digital Camera

Pack

EN

Minnie Digital Camera Pack

English

CONTENTS

I Getting to know your camera……………………..1

1. Configuration & installation…………………..….1

2. Monitor screen display……………….….…….2

3. Preparation before capture……………………..2

4. Shooting……………………………………………3

5. Video& Audio recording…………………….…7

6. Audio input /output………………………………..8

7. Image review setup……………………….…..10

8. Other setup………………………………………12

II Software & Download………………………………15

1. PC-CAM driver installation…………………..15

2. How to use PC CAM function…………………23

3. How to download the photos………………......23

III Maintenance…………………………………….……24

IV Specification and system requirement………....27

English

1

I Getting to know your camera

1. Config

uration & installation

1 Shutter button

2 Power button

3 Flash light

4 Macro switch

5 USB jack

6 Lens

7 TFT monitor screen

8 Left/self-timer button

9 Playback button

10 Zoom out button

11 Zoom in button

12 Busy light

13 Macro light

14 Up/Display button

15 Ok button

16 Right / Flash button

17 Down/Mode button

18 Delete Button

19 Menu button

20 Battery cover

21 SD card slot

22 Tripod socket

This product is not a toy

English

2

2. Monitor screen display

3. Preparation before capture

3.1 Battery

It’s optional to use LR03(AAA) alkaline batteries or rechargeable batteries.

Open the battery cover and load the batteries according to the polarity

indicated on the battery door.

3.2 Insert the memory card

Insert the memory card to the card slot carefully. Check the right direction

before insert the memory card.

Attention: If you can not insert the SD card, take it out

and insert again.

English

3

4. Shooting

1): Press POWER button to enter the default capture mode;

2): Press the SHUTTER button to take pictures.

Attention:

z Do not take the memory card or battery out when camera is saving

the image, otherwise, the image won't be saved completely.

z The screen will power off automatically if the camera is not in working

status for 30 seconds. Press any key to restart the screen.

4.1 Review photos

Press PLAYBACK button to view the pictures. Press the LEFT or

RIGHT button to select the picture.

4.2 Delete photos

a) Press the PLAYBACK button to enter review mode.

b) Press the DELETE button to enter the DELETE mode;

c) Press the LEFT button to select “Yes”;and press the OK button to

delete the file.

4.3 Shooting setup

Press “MENU” to enter main menu for 2 options: “Image” mode and “Setup”

mode:

Select “Image”, the following settings are: Resolution, Quality, White

Balance, Color Effect, Exposure, DateStamp, Selftimer, and Burst

Snapshot

English

4

A. Resolution:

a) Press the UP or DOWN button

to select the “resolution” mode,

then press the RIGHT button

for 5 options :2592x1944 ，

2048x1536 ， 1600x1200， 1280x960,

640x480. Press the UP or

DOWN button

to select the resolution .

b) press the “OK” button to confirm and press “MENU” button to exit.

B. Quality:

a) Press the UP or DOWN button to select “Quality” and press

the RIGHT button

for 3 options: “Super”, “Fine”, “Normal”.

b) Press the UP or DOWN button to select the image quality.

c) Press the OK button to confirm and press the MENU button to exit.

C. White Balance:

a) Press the UP or DOWN button to select “White Balance”, press

the RIGHT button

for 5 options: Auto, Day Light, Tungsten, Fluorescent,

and Cloudy;

b) Press the UP or DOWN button

to select the proper mode;

c) Press the “OK” button to confirm and press the MENU button to exit;

D. Color Effect:

a) Press the UP or DOWN button to select “Color Effect”, press

the RIGHT button

for 3 options: “Color”, “Sepia”, “Monochrome”;

b) Press the UP or DOWN button to select the color you desired;

c) Press the “OK” to confirm and press the MENU button to exit.

English

5

E. Exposure:

a) Press the UP or DOWN button

to select “Exposure”, and then

press the RIGHT button

to select;

b) Press the LEFT or RIGHT button to adjust the exposure from

-2.0 to +2.0; then press the “OK” button to confirm.

F. Date Stamp:

Set up "date stamp" if you would like to show the “date" on you picture

a) Press the UP or DOWN button

to select “Date Stamp”, press the

RIGHT button

to select;

b) Press the UP or DOWN button to select “Enable” or “Disable”;

c) Press the “OK” button to confirm and press the MENU button to exit.

G. Self-timer:

a) Press the UP or DOWN button to select “Selftimer”, press the

RIGHT button

to select: “Disable”, “10SEC”, “20SEC”;

b) Press the UP or DOWN button to select the time you desired;

c) press the “OK” to confirm and press MENU button to exit.

Attention: select “Disable” if you want to cancel the selftimer function.

H. Burst Snapshot:

You can select the Burst Snapshot to take 3 pictures continuously.

a) Press the UP or DOWN button to select “Burst Snapshot”, press

the RIGHT button

for 2 option: ”Single”, “Burst”;

b) Press the UP or DOWN button to select “Burst”;

English

6

c) Press the “OK” button to confirm and press the MENU button to exit.

Flashlight

Auto: Automatically turn on/off according

to the light

Flash on: Force on the flash

Flash off: Force off the flash

In capture mode, press the FLASH button to adjust the flash mode.

● The screen is in blank when the flash is in charge status, the next image

can be shot only when the charge is completed.

●If shooting with flash under a bright environment, the facular in the image

will cause the incorrect exposure.

Attention: The flash does not work in “Burst snapshot” mode.

In order to save power, the flash will not work when battery is low.

Digital zoom

To view the zoom effected by LCD.

Note: digital zoom may affect the quality of image. The higher digital zoom

multiples, the lower of the image quality, maximum 4X digital zoom is

available.

In the camera/video/playback mode, press the ZOOM IN or ZOOM OUT

button to zoom in or zoom out;

English

7

5. Video recording:

1): Press the “MODE” button to select video mode“ ” ;

2): Press the SHUTTER button to start video recording;

3): Press the SHUTTER button again to stop recording.

5.1 Play video files

a) Press the PLAYBACK button to view the video file.

b): Press the LEFT

or RIGHT button to select the video file;

c): Press the SHUTTER button to play video file and press the SHUTTER

button again to end the playing;

d): Press the OK button to pause, press it again to continue.

Attention: Please note that this camera does not support the speaker;

the volume is only available when connecting with TV or PC.

5.2 Delete video file

See page 3 for detail set up.

5.3 Video recording setup

In the video mode press the “MENU” button to enter the main menu for 2

options: “video” and “setup”. There are 4 options available for “video” setup:

“Resolution”, “Frame rate”, “White balance” and “Audio”.

A: Video Resolution:

a) Press the UP or DOWN button

to select “Resolution”, press the

RIGHT button

to select: 640x480 or 320x240;

English

8

b) Press the UP or DOWN button to select the resolution.

c) Press the OK button to confirm and press the MENU button to exit.

B: Frame rate:

a) Press the UP or DOWN button

to select “Frame rate”, press the

RIGHT button

for 2 options: 30FPS or 15FPS;

b) Press the UP or DOWN button to select the frame rate;

c) Press the OK button to confirm and press the MENU button to exit.

C: White balance

See page 5 for detail set up.

D: Audio Recording: .

a) Press the “MENU” button under the video mode, press the UP or DOWN

button

to select “Audio”, press the RIGHT button for 2

options :“Enable” or “Disable”;

b) The video is with voice recorded when select” Enable” , the video is

without voice recorded when select “ Disable”;

c) Press the OK button to confirm and press the MENU button to exit.

6. Audio recording

6.1 Audio input

a): Power on;

b): Press the “MODE” button to select Audio Mode; ( )

c): Press the SHUTTER button to start audio recording, the recording time

will be showed on the screen;

English

9

d): Press the SHUTTER button again to stop recording.

6.2 Delete audio files

See page 4 for detail set up

6.3. Play video /audio file on TV

You can play video/audio file on TV by connecting the AV cable：

a): Power on TV and switch to AV mode;

b): Power on the camera and connect it to TV by the AV cable;

c): Press the MODE button to enter the PLAYBACK mode;

d): Press LEFT or RIGHT button

to select the file. Press the

SHUTTER button to play and press it again to end the playing.

e): Press the OK button to pause and press it again to continue.

Attention:

● The camera screen will automatically off when the cable is connected to

the camera;

● The battery will also be used when the camera connected to TV;

● The TV system may affect the image quality, please adjust the camera

system PAL or NTSC to comply with the TV system(see page 16);

● Please adjust the TV setting if the image does not display at the center

of TV screen; this is not the failure of the camera.

● Please use the cable attached to connect with the camera and TV.

English

10

7：Image review setup:

In image playback mode, press the “MENU” button to enter the main menu

for 2 options: “play” and “Setup”.

There are 8 Options in “play” mode: Delete Current, Delete All, lock,

thumbnail, set logo, rotate, slideshow.

7.1 Delete image

a) Press the UP or DOWN button to select “delete current” or

“delete all”.

b) Select “Delete Current” to delete the current image. Press the RIGHT

button to confirm.

c) Select “Delete All” to delete all the images. Press RIGHT button to

confirm.

Attention: You can also delete current file by the DELETE button.

7.2 Lock image

a) Press the UP or DOWN button

to select “lock”, press the

RIGHT button

for 4 options: “lock current”, “lock all”, “unlock

current”, “unlock all”;

b) Press the UP or DOWN button

to select;

c) Press the OK button to confirm and press the MENU button to exit.

Attention: The locked image can not be deleted.

7.3 Thumbnail

a) Press “MENU” button in image playback mode, then press the UP or

DOWN button

to select “thumbnail”, press the RIGHT button to

English

11

enter thumbnail mode;

b) Press the LEFT, RIGHT, UP and DOWN button

to select

image, then press the OK button to restore the original size.

7.4 Set Logo:

You can set the picture you like as the startup logo.

a) Press the UP or DOWN button

to select “Set logo”, press the

RIGHT button

for 2 options: “Yes”, “No”;

b) Press the UP or DOWN button to select “Yes”;

c) Press the OK button to confirm and back to playback mode.

7.5 Rotate

a) Press the “playback” button to enter the image playback mode;

b) Press the UP or DOWN button to select “Rotate”, press the

RIGHT button

to enter rotate mode: 90º, 180º and 270º;

c) Press the UP or DOWN button to select the rotate degree you

need, then press the OK button to confirm.

Attention: The “Rotate” function does not work on resolution

“2592x1944”(5Mega pixel) or above.

7.6 Slideshow:

a) Press the UP or DOWN button

to select “slide show”;

b) Press the RIGHT button to set slide show；

c) Press the SHUTTER button to return to the normal playback mode.

English

12

8. Other settings

A: Language (Abc):

a) Power on and press the “MENU” button to enter “Image” and “Setup”;

b) Press RIGHT button

to select “Setup”;

c) Press the UP or DOWN button to select “Language (Abc),

d) Press the RIGHT button to enter “Language (Abc)”;

e) Press the UP or DOWN button to select the language you need;

then press the OK button to confirm.

B: Auto Power Off

a) Power on and press the “MENU” button to enter “Setup”;

b) Press the UP or DOWN button

to enter “Auto Power Off”;

c) Press the RIGHT button to select “Disable”, “60Sec”, “120Sec”;

d) Press the UP or DOWN button to select power off time, then

press OK button to confirm.

C: TV Output

a) Power on and press the “MENU” button to enter “Setup”;

b) Press the UP or DOWN button

to enter “TV Output”;

c) Press the RIGHT button to enter “NTSC，PAL”;

d) Press the UP or DOWN button to select the proper TV system;

then press the OK button to confirm.

d) Press the “MENU” button to exit.

English

13

D: Play Logo

a) Press the UP or DOWN button

to select “ Play Logo ”;l

b) Press the RIGHT button to select “Enable” or “Disable”;

c) Press the UP or DOWN button to select the operation you need;

then press the OK button to confirm.

d) Press the MENU button to exit.

Attention: No startup screen is displayed when you select “Disable”

E: Light Frequency

a) Power on and press the “MENU” button to select “Setup”;

b) Press the UP or DOWN button

to select “Light Frequency”;

c) Press the RIGHT button to select: 50HZ or 60HZ then press the OK

button to confirm.

d) Press the MENU button to exit.

F: Date/Time

a) Power on and press the “MENU” button to enter “Setup” mode;

b) Press the UP or DOWN button

to enter “Date/Time”;

c) Press the RIGHT button to enter the Date/Time interface;

d) Press the RIGHT button to select year, month, date, hour, and minute;

e) Press the UP or DOWN button to set up the year, month, date

hour and minute; and then press the OK button to confirm.

G: Buzzer

English

14

a) Power on and press the “MENU” button to select “Setup” mode;

b) Press the UP or DOWN button

to select “Buzzer”; press the right

button to select “Enable” or “Disable”, and then press the OK button to

confirm.

c) Press the MENU button to exit.

H: Format

a) Power on and press the “MENU” button to select “Setup” mode;

b) Press the UP or DOWN button

to select “Format”;

c) Press the RIGHT button to select “Yes” to format the camera internal

memory or SD card.

d) Press the OK button to confirm and press the MENU button to exit.

Attention: All the saved files will disappear if you format the memory.

I: Default setting

a) Power on and press the “MENU” button to select “Setup”;

b) Press the UP or DOWN button select “Default setting”;

c) Press the RIGHT button for 2 options: “Load”, “NO”,

d) Press the UP or DOWN button to select “load” to back to the default

setting.

e) Press the OK button to confirm.

f) Press MENU button to exit.

J: USB Mode

English

15

Select “PC Camera” mode when you use this camera as a PC camera.

Select “Mass Storage” mode when you download, delete or upload file, it

can also be used as a removable disk.

a) Power on and press the “MENU” button to enter “Setup”;

b) Press the UP or DOWN button

to select “USB Mode”;

c) Press RIGHT button for options: “mass storage” or “PC camera”.

d) Press UP or DOWN button to select;

e) Press the OK button to confirm and press MENU button to exit.

K: Firmware version

a) Power on and press the “MENU” button to enter “Setup”;

b) Press the UP or DOWN button to select “Firmware version”;

c) Press the RIGHT button to enter, it will show the firmware version

and updated date.

d) Press OK button to exit.

II. Software & Download

1. PC-CAM driver installation

Insert the CD into the CD-ROM of your PC, An interface appears as follows,

Click the “Install Camera Driver” to install the camera driver.

English

16

Select the installed language

English

17

Connect the camera with PC by USB cable, Power on the camera, then

press “mode” button to select “PC CAMERA”

Strona jest ładowana ...

Ingo Hello Kitty HEC050N Instrukcja obsługi

Ingo Hello Kitty HEC050N Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty