123
USER GUIDE
Note: For lamps with a weight significantly higher than that of
the lamps for which they are a replacement, attention should
be drawn to the fact that the increased weight may reduce the
mechanical stability of certain luminaires and lamp holders
and may impair contact making and lamp retention.
!!! Please refer to our website: www.geemarc.com for an
up to date user guide, as there may be important
updates and changes you need to be made aware of !!!
1. Introduction
Congratulations on purchasing your Geemarc AMPLICALL6.
The Bulb unit (The AMPLICALL6) receives a transmitted signal
from any number of AMPLICALL transmitters. For example, the
AMPLICALL1, 2,3, 30 & 40 and extra AC6 LR.
2. Unpacking the AMPLICALL6
When unpacking the AMPLICALL6, you will find the following
in the box:
• 1 AMPLICALL6 Unit
• 1 master remote with battery
• 1 user guide.
3. General Description
Rated current: 0.022A
t
a
: 35 ℃
4. Mounting
• Turn off the power of your house light fitting
• Remove the Bulb
• Place the AMPLICALL6 Bulb
• Turn on the power
• Now you can use the remote to turn on your light.
5. Pairing
Once power is connected (every time if AC is connected),
Green LED will light for 10 seconds. This means the LED
bulb is in pairing mode.
6. Pair with AC1, 2, 30, 40 (option)
If the LED bulb is under pairing mode, then press the AC1
(AC2, AC30-40 and smoke alarm etc.) to pair with the LED
device.
If the 1
st
AC1 is paired with the bulb, the bulb White LED will
flash once: W – .
If the 2
nd
AC1 is paired with the bulb, the bulb White LED will
flash twice: W – W.
If the 3
rd
AC1 is paired with the bulb, the bulb White LED will
flash three times: W – W – W.
If the 4
th
AC1 is paired with the bulb, the bulb White LED will
flash four times: W – W – W – W.
Remarks:
• AC6 is able to pair with 4 x AC6 LR. 4x extra device e.g.
AC1, 2, 3, 4 and 10x smoke alarm.
• If the LED bulb is under pairing mode, then press the
Smoke alarm button, if the smoke alarm is paired with the
bulb,the bulb White LED will flash once.
7. Pair with AC6 LR Remote Dim/Highlight/OFF switch
AC6 LR (Master Dim / Highlight / OFF) control is already
pre-paired in the factory.
User does not need to do the pairing procedure.
In case the user wants to have extra AC6 LR to control the
light bulb Dim / Highlight / OFF, then one can pair extra AC6
LR with the LED bulb. Just follow the above pairing procedure.
Remarks:
• Geemarc LED bulb is able to pair with a maximum of 4 x
Bulb
Remote
A
C6 LR
E27
456
CallHear extra AC1 remote devices plus 4 AC6 LR remotes
and 10 x Smoke alarms. So total 18*remote devices can be
paired (4+4+10).
• If more than 4 x extra remote device AC’s are paired with
the LED, then the LED will based on “First IN First Out”, the
1st paired device will be removed from the bulb.
• If the AC failure duration is shorter than 1.0 seconds, the
bulb will not enter pairing mode.
8. AC6 LR Remote Dim/Highlight/OFF:
Press the remote button to turn on the LED.
Press again for Highlight. Press again the remote button to
turn OFF the LED.
9. AC range:
Press the AC*, the RED and WHITE LED will flash alternately.
During the LED is flashing (someone press the doorbell
button), user can press the AC6 LR master (Dim / Highlight /
OFF switch) to stop flashing LED.
Remarks:
If there are more than one AC* remote devices paired with
LED, during the LED is flashing (someone press the doorbell
button). The RED blinking signal cadency will be different to
indicate which AC* has triggered the bulb:
#1: R– W– R– W– R– W– R– W– R.
#2: RR – W – RR – W – RR – W – RR.
#3: RRR – W – RRR – W – RRR.
#4: RRRR – W – RRRR – W – RRRR.
10. Smoke alarm
If smoke alarm trigger the bulb, The RED LED will blinking.
During the RED LED is flashing user can press the AC6 LR
master (Dim / Highlight / OFF switch) to stop RED flashing
LED.
11. Trouble shooting
Battery Low:
If battery of AC6 LR (remote Dim/Highlight/OFF) is low (below
6V), the pressing the AC6 button, it can still trigger the bulb,
but the LED will not be ON. This means the battery is low.
Please replace the battery.
12. Remote battery replacement:
Removal and replacement of battery should be carried out by
an adult or under adult supervision.
Take special care to ensure battery is inserted correctly,
observing (+) and (-) polarity marks on battery and product.
Remove batteries if you will not be using the product for long
periods.
13. GUARANTEE
From the moment your Geemarc product is purchased,
Geemarc guarantee it for the period of two years. During this
time, all repairs or replacements (at our discretion) are free of
charge. Should you experience a problem then contact our
help line or visit our website at www.geemarc.com.
The guarantee does not cover accidents, negligence or
breakages to any parts. The product must not be tampered
with or taken apart by anyone who is not an authorized
Geemarc representative.
The Geemarc guarantee in no way limits your legal rights.
IMPORTANT: YOUR RECEIPT IS PART OF YOUR
GUARANTEE AND MUST BE RETAINED AND PRODUCED
IN THE EVENT OF A WARRANTY CLAIM.
Please note: The guarantee applies to the United Kingdom
only.
14. DECLARATIONS
CE Directives:
Geemarc Telecom SA hereby declares that this product is in
compliance with the essential requirements and other relevant
provisions of the Radio and Telecommunications Terminal
Equipment Directive 2014/53/UE.
The CE declaration of conformity may be consulted at
www.geemarc.com
Recycling Directives:
The WEEE (Waste Electrical and Electronic Equipment) has
been put in place for the products at the end of their useful
life are recycled in the best way.
When this product is finished with, please do not put it in your
domestic waste bin. Please use one of the following disposal
options:
- Remove the batteries and deposit them in an appropriate
WEEE skip.
Deposit the product in an appropriate WEEE skip.
- Or, hand the old product to the retailer. If you purchase a
new one, they should accept it.
Thus if you respect these instructions you ensure human
health and environmental protection.
For product support and help visit our website at
www.geemarc.com
5B Swallow Court, Swallow fields, Welwyn Garden City,
Hertfordshire, AL7 1SB, UK
telephone 01707 387602 or fax 01707 832529
QUGAMPLICALL6_En_2/3A4_V1.1
-
1
-
2
