ASL INTERCOM Fusion 110 Skrócona instrukcja obsługi

Typ
Skrócona instrukcja obsługi
Installation of the ASL 110 FUSION Proportional and Digital Head Array and the programming of the wheelchair electronics
should only be conducted by a specialist with an in depth technical knowledge of the ASL 110 FUSION Proportional and
Digital Head Array and the wheelchair electronics. All testing and verification of the completed wheelchair equipment
with the ASL 110 FUSION Proportional and Digital Head Array to ISO/RESNA or applicable standards for the completed
wheelchair, including RFI compatibility testing, is the sole responsibility of the wheelchair manufacturer.
ATOM Technology
Powered by
PATENT PENDING
ATOM ACCESSORIES
ASL 558 ATOM Bluetooth Wireless Mouse Emulator
The 558 ATOM Bluetooth Wireless Mouse Emulator works in three or four switch functions. The dial
settings is a custom feature which will allow adjustments of the directional input from the ATOM to
the mouse emulator. For instance, when in user mode, the function of the back pad can be changed to
activate up/down, left/right or click/drag. Adjustments can be made of all of the directional outputs
of the ATOM. There are 12 switches to adjust speed, response times and the latch/drag delay times.
The ON switch is to select MAC or PC platform.
ASL 557-3 ATOM Bluetooth Wireless Switch Receiver
The ASL 557-3 ATOM Bluetooth Wireless Switch Receiver is intended to be used for
Bluetooth wireless access to communication devices, TECLA Shield, TECLA E, or switch
interfaces on a computer. The USB side plugs into a communication device directly, or into
a computer. Each plug corresponds to the pad on the head array (forward, right, or left).
You can connect the plugs to the scan and select ports of a communication device, switch
interface or TECLA ports. If using with the TECLA products, you need a rechargeable battery.
ASL 545E Tecla - Bluetooth Interface
Tecla is a cloud connected assistive device that provides users with control of their smart
device and enviroment. Using Bluetooth, Tecla connects directly to ATOM technology whenever
the ATOM is in wireless mode. ATOM technology speaks directly to the Tecla which is able
to connect up to 8 devices. You can use Tecla with iPhone, iPad, iPad Touch, Mac computers
with switch control, Apple TV’s with switch control, Android devices with switch access,
Samsung devices with universal switch and Windows computers with scanning software.
ASL 110 FUSION Proportional and Digital Head Array
Adaptive Switch Laboratories, Inc. www.asl-inc.com PH: 800-626-8698, FX: 830-798-6221
Rev 5-2020
The ASL 110 FUSION Proportional and Digital Head Array is warranted to be free from
manufacturing defects for two years from date of purchase.
WARRANTY
Adaptive Switch Laboratories, Inc. www.asl-inc.com
SIDE VIEW
This warranty shall not cover equipment modified or repaired by unauthorized personnel. ASL cannot be held responsible for damage caused by incorrect
installation or incorrect use of the product. Misuse, mishandling, or storage is not covered by this warranty. The foregoing express warranty is exclusive and in
lieu of any other warranties of any kind, whether express or implied, including the implied warranties of merchantability or fitness for a particular purpose, and
is the sole and exclusive remedy for any defective product. The health care professional is responsible for understanding the intended use of the ASL equipment
and the specification and safe programming parameters of the chair it is going on. The wheelchair manufacturer is responsible for testing and verification of
the completed wheelchair equipped with the ASL 110 FUSION Proportional and Digital Head Array to ISO, RESNA or other applicable standards including RFI
compatibility. RFI interference can impact the proper functioning of the wheelchair. Route and secure all cables in such a way in order to prevent damage by
crushing, cutting or snagging. Incorrect installation, configuration, or programming could result in unsafe set up of the wheelchair for the user. ASL accepts no
liability for losses of any kind which result for such conditions.
SCAN FOR PROGRAMMING
INFORMATION
SECURITY MEASURES
A reset switch should always be plugged into a mode port programmed to stop the chair and be available in case
of emergency to stop movement of the wheelchair. The ASL 110 FUSION Proportional and Digital Head Array is
susceptible to moisture. If moisture contacts a sensor, unwanted movement may occur. Do not operate the ASL
110 FUSION Proportional and Digital Head Array in rain or snow. Do not cover the ASL 110 FUSION Proportional
and Digital Head Array with a porous material. Do not operate the ASL 110 FUSION Proportional and Digital Head
Array with wet hair.
CONNECTION REQUIREMENTS:
LiNX Input Module
MK6i (ASL 171 Needed)
Omni or Omni 2
Enhanced Display or SKIM
ASL 540 12 Volt Rechargeable Battery
and Charger with 9-Pin Connector
The ASL 540 12 Volt Rechargeable Battery and Charger with 9-pin connector allows one to take an
ATOM digital drive control with a 9-pin connector and move it to a manual wheelchair. This allows
a patient to have access to their technology consistently since the ATOM drive control will connect
wirelessly to the ASL Accessories like the ASL 557-3 ATOM Bluetooth Wireless Switch Interface, ASL
558 ATOM Wireless Bluetooth Mouse Emulator, or the ASL 545E Tecla Shield. It is rechargeable and can
be used while being charged. The battery will last up to three days and has a battery level indicator.
FRONT VIEW
CONNECTOR
6” WIRE LENGTH
EXPLANATION OF PARTS
FUSION PROPORTIONAL AND DIGITAL HEAD ARRAY
Bluetooth Pairing Port
ASL 165 Display and
Programmer Connection Port
Back Pad Connection Port
Bluetooth Indicator Light
Mode Port
User Port
A
B
C
D
E
F
INTERFACE PORTS
A
C
F
E
D
B
3
2
1
Light Sensor: Automatically dims light when in
a darker area
1
2
Power Light:
Green indicates - Driving Digital and Proportional
Amber indicates - Bluetooth Mode
3
On/Off Membrane Switch
4
Bluetooth Light:
Flashing Blue Light Indicates - Not Paired
Solid Light Indicates - Paired to ASL Accessory
No Light Indicates - Bluetooth is turned off
in the Fusion
When a switch is plugged into the User Port of the FUSION interface a momentary
activation of the switch will activate the highlighted top selection on the ASL 165
when used as a display. When the patient holds the switch to the adjusted time, the
system will move to the next line item turned on in the FUSION display. An Auditory
tone will be heard 1 beep for On/Off, 2 beeps for Bluetooth, 3 beeps for Function
Next, and 4 beeps for Profile Next.
FRONT OF INTERFACE
4
The FUSION Proportional Head Array is used with the ASL 165 FUSION Display and
Programmer. The 165 FUSION Programmer and Display has multiple functions.
It can be used to personalize the FUSION to the specific patients needs.
The 165 FUSION can be used as a display, so the patient will know what
they are controlling, such as: Bluetooth, Next Function, Next Profile,
and On/Off of the Head Array, but is not required.
* See ASL 165 FUSION Display and Programmer Manual for more information
ASL 165 FUSION DISPLAY
CHAIR
ASL 606 Multi Axis
Adjustable/Removable
Headrest Mounting
Hardware
FUSION HEAD ARRAY SIZES
PROTON WING
3”h X 2”w
ELEMENT
3”h X 2”w
*
RESET SWITCHES & MOUNTING OPTIONS
ASL 611 Arm Rest
Switch Mounting Bracket
ASL 930B Swing Away
Mechanism (Dual)
ASL 930 Swing Away
Mechanism (Single)
ASL 208 Adjustable
Proximity Sensor
ASL 204 Non-Adjustable
Proximity Sensor
ASL 314
Ultra Light Switch
ASL 304B
Wobble Switch
ASL 320 Pulse
Mechanical Switch
  • Page 1 1
  • Page 2 2

ASL INTERCOM Fusion 110 Skrócona instrukcja obsługi

Typ
Skrócona instrukcja obsługi

w innych językach