Sony XR-CA600 Instrukcja obsługi

Kategoria
Radioodbiorniki samochodowe
Typ
Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

GB
CZ
PL
TR
RU
FM/MW/LW Cassette Car Stereo
3-227-102-31 (1)
Operating Instructions
Návod k obsluze
Instrukcje Obs³ugi
Kullanım kılavuzu
Инструкция по эксплуатации
XR-CA600X XR-L500X
XR-CA600V XR-L500V
XR-CA600 XR-L500
For installation and connections, see the supplied installation/connections manual.
Informace o instalaci a zapojení naleznete v přiložené příručce Instalace/zapojení.
Szczegó³y dotycz¹ce instalacji i pod³¹czeñ, proszê sprawdziæ w dostarczonym, osobnym
podreczniku.
Kurma ve baðlantý iþlemleri için ünite beraberýndeki Kurma/Bagiantýiar kýiavuzuna
bakýnýz.
Перед установкой и подсоединениями прочитайте прилагаемую инструкцию по
установке и подсоединению.
© 2001 Sony Corporation
FM
/
MW
/
LW
Cassette Car Stereo
2
Welcome !
Thank you for purchasing this Sony Cassette
Player. You can enjoy its various features even
more with:
Optional controller accessories
Rotary commander RM-X4S
Card remote commander RM-X114
XR-CA600X/CA600V/CA600 only
Optional CD/MD units (both changers and
players)*
1
.
CD TEXT information (displayed when a CD
TEXT disc*
2
is played on a connected optional
CD unit with the CD TEXT function).
*1 This unit works with Sony products only.
*2 A CD TEXT disc is an audio CD that includes
information such as the disc name, artist name,
and track names. This information is recorded on
the disc.
3
Table of Contents
Location of controls . . . . . . . . . . . . . . . . . . . 4
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Notes on Cassettes. . . . . . . . . . . . . . . . . . . . . 6
Getting Started
Resetting the unit. . . . . . . . . . . . . . . . . . . . . . 7
Detaching the front panel . . . . . . . . . . . . . . . 7
Setting the clock . . . . . . . . . . . . . . . . . . . . . . 8
Cassette Player
Listening to a tape . . . . . . . . . . . . . . . . . . . . . 9
Playing a tape in various modes . . . . . . . . . . 9
Radio
Storing stations automatically
Best Tuning Memory (BTM). . . . . . . 10
Receiving the stored stations. . . . . . . . . . . . 10
Storing only the desired stations . . . . . . . . . 11
Tuning in a station through a list
(XR-CA600X/CA600V/CA600 only)
List-up . . . . . . . . . . . . . . . . . . . . . . . . 11
RDS
Overview of RDS . . . . . . . . . . . . . . . . . . . . 12
Automatic retuning for best reception results
AF function . . . . . . . . . . . . . . . . . . . . 12
Receiving traffic announcements
TA/TP . . . . . . . . . . . . . . . . . . . . . . . . 13
Presetting RDS stations with
AF and TA setting. . . . . . . . . . . . . . . . . . 14
Tuning in stations by programme type
PTY . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting the clock automatically
CT . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Other Functions
Using the rotary commander. . . . . . . . . . . . 16
Adjusting the sound characteristics. . . . . . . 17
Quickly attenuating the sound. . . . . . . . . . . 17
Changing the sound and display settings
Menu . . . . . . . . . . . . . . . . . . . . . . . . . 18
Selecting the sound position
My Best sound Position (MBP). . . . . 19
Setting the equalizer . . . . . . . . . . . . . . . . . . 19
CD/MD Unit (optional)
(XR-CA600X/CA600V/CA600 only)
Playing a CD or MD. . . . . . . . . . . . . . . . . . 20
Display items . . . . . . . . . . . . . . . . . . . . . . . 21
Playing tracks repeatedly
Repeat Play . . . . . . . . . . . . . . . . . . . . 21
Playing tracks in random order
Shuffle Play. . . . . . . . . . . . . . . . . . . . 21
Labelling a CD
Disc Memo . . . . . . . . . . . . . . . . . . . . 22
Locating a disc by name
List-up. . . . . . . . . . . . . . . . . . . . . . . . 23
Selecting specific tracks for playback
Bank . . . . . . . . . . . . . . . . . . . . . . . . . 23
Additional Information
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 24
Removing the unit. . . . . . . . . . . . . . . . . . . . 25
Specifications . . . . . . . . . . . . . . . . . . . . . . . 26
Troubleshooting . . . . . . . . . . . . . . . . . . . . . 27
Error displays . . . . . . . . . . . . . . . . . . . . . . . 28
4
Location of controls
Refer to the pages listed for details.
: During tape playback : During radio reception : During menu mode
: During CD/MD playback (optional) (XR-CA600X/CA600V/CA600 only)
a Volume control dial 13
b MBP button 19
c SOURCE (Power on/Tape/Radio/CD*
1
/
MD*
1
) button 5, 9, 10, 11, 13, 19, 20,
22
d Display window
e Z (eject) button (located on the front side
of the unit, behind the front panel) 9
f Receptor for the card remote
commander
g MENU button 8, 9, 10, 14, 15, 18, 19,
20, 22, 23, 24
h DISPLAY/PTY (display mode change/
programme type) button*
1
12, 15, 21,
22
i SCROLL button*
1
21
j OPEN button 7, 9
k XR-CA600X/CA600V/CA600:
LIST button
11
22, 23
XR-L500X/L500V/L500:
PTY/DSPL button 12, 15
l EQ7 button 19
m RESET button (located on the front side of
the unit, behind the front panel) 7
n Number buttons
(3) REP 9
10, 11, 13, 14
(3) REP 21
(6) SHUF 21
o MODE (o) button
9
10, 11, 13
20, 22
p SOUND button 17, 19
q AF button 12, 14
r TA button 13, 14
s OFF (Stop/Power off) button*
2
5, 7, 9,
20
t ENTER button
11, 14
8, 9, 10, 15, 18, 19, 20, 22, 23,
24
22, 23
*1 XR-CA600X/CA600V/CA600 only
*2 Warning when installing in a car without
an ACC (accessory) position on the
ignition switch
After turning off the ignition, be sure to press
(OFF) on the unit for 2 seconds to turn off
the clock display.
Otherwise, the clock display does not turn off
and this causes battery drain.
TAPE RADIO MENU
CD/MD
XR-CA600X/CA600V/CA600
1
2
3
4
5
6
AF
TA
O
FF
D
S
MENU
LIST
SOUND
ENTER
MBP
SOURCE
REP
SHUF
MODE
EQ 7
D
I
S
C
/
P
R
E
S
E
T
SEEKSEEK
DISPLAY
O
P
EN
PTY
S
C
R
O
LL
RADIO
CD/MD
TAPE
RADIO
CD/MD
TAPE
RADIO
CD/MD
RADIO
MENU
CD/MD
5
u XR-CA600X/CA600V/CA600:
DISC/PRESET buttons (+/)
XR-L500X/L500V/L500:
PRESET buttons (+/)
10, 11, 15
8, 9, 10, 14, 15, 18, 19, 20, 22,
23, 24
20, 22, 23
v SEEK buttons (/+)
9
10, 11, 13
8, 9, 15, 17, 18, 19, 20, 24
20, 22, 23
The corresponding buttons of the card
remote commander control the same
functions as those on this unit.
a DSPL button
b MENU button
c SOURCE button
d SEEK (</,) buttons
e SOUND button
f OFF button
g VOL (/+) buttons
h MODE button
i LIST button*
3
j DISC*
3
/PRESET(M/m) buttons
k ENTER button
l ATT button
*3 Not available for XR-L500X/L500V/L500
Note
If the units is turned off by pressing (OFF) for 2
seconds, it cannot be operated with the card remote
commander unless (SOURCE) on the unit is pressed,
or a cassette is inserted to activate the unit first.
Tip
Refer to “Replacing the lithium battery” for details on
how to replace the batteries (page 25).
AF
TA
O
FF
D
S
MENU
LIST
SOUND
ENTER
D
I
S
C
/
P
R
E
S
E
T
SEEKSEEK
DISPLAY
O
P
E
N
SC
R
O
LL
PTY
(SEEK)
(–): to select
leftwards/
.
(SEEK)
(+): to select
rightwards/
>
(DISC/PRESET)/(PRESET)
(+): to select upwards
In menu mode, the currently selectable button (s)
of these four are indicated with a “ M” in the display.
(DISC/PRESET)/(PRESET)
(–): to select downwards
RADIO
MENU
CD/MD
TAPE
RADIO
MENU
CD/MD
Card remote commander RM-X114
(optional)
DISC
ATTOFF
DSPL MODE
SOURCE
DISC
+
VOL
+
PRESET
+
SEEK
+
SEEK
PRESET
SOUND
E
N
TER
MENU
LIST
6
Precautions
If your car was parked in direct sunlight, allow
the unit to cool off before operating it.
If no power is being supplied to the unit, check
the connections first. If everything is in order,
check the fuse.
If no sound comes from the speakers of a two-
speaker system, set the fader control to the
centre position.
When a tape is played back for a long period,
the cassette may become warm because of the
built-in power amplifier. However, this is not a
sign of malfunction.
If you have any questions or problems
concerning your unit that are not covered in this
manual, please consult your nearest Sony dealer.
To maintain high quality sound
Be careful not to splash juice or other soft drinks
onto the unit or tapes.
Notes on Cassettes
Cassette care
Do not touch the tape surface of a cassette, as
any dirt or dust will contaminate the heads.
Keep cassettes away from equipment with
built-in magnets such as speakers and
amplifiers, as erasure or distortion on the
recorded tape could occur.
Do not expose cassettes to direct sunlight,
extremely cold temperatures, or moisture.
Slack in the tape may cause the tape to be
caught in the machine. Before you insert the
tape, use a pencil or similar object to turn the
reel and take up any slack.
Distorted cassettes and loose labels can cause
problems when inserting or ejecting tapes.
Remove or replace loose labels.
The sound may become distorted while playing
the cassette. The cassette player head should be
cleaned after each 50 hours of use.
The use of cassettes longer than 90 minutes
is not recommended except for long
continuous play
The tape used for these cassettes is very thin and
tends to stretch easily.
Frequent playing and stopping of these tapes
may cause them to become entangled in the
cassette deck mechanism.
Slack
7
Getting Started
Resetting the unit
Before operating the unit for the first time or
after replacing the car battery, you must reset the
unit.
Remove the front panel and press the RESET
button with a pointed object, such as a ballpoint
pen.
Note
Pressing the RESET button will erase the clock setting
and some stored contents.
Detaching the front panel
You can detach the front panel of this unit to
protect the unit from being stolen.
Caution alarm
If you turn the ignition switch to the OFF
position without removing the front panel, the
caution alarm will beep for a few seconds.
If you connect an optional amplifier and do not
use the built-in amplifier, the beep sound will be
deactivated.
1 Press (OFF)*.
Tape playback or radio reception stops (the
key illumination and display remain on).
* If your car has no ACC position on the ignition
switch, be sure to turn the unit off by pressing
(OFF) for 2 seconds to avoid car battery drain.
2 Press ( OPEN), then slide the front
panel to the right, and gently pull out
the left end of the front panel.
Notes
If you detach the panel while the unit is still turned
on, the power will turn off automatically to prevent
the speakers from being damaged.
Do not drop or put excessive pressure on the front
panel and its display window.
Do not subject the front panel to heat/high
temperature or moisture. Avoid leaving it in parked
cars or on dashboards/rear trays.
Tip
When carrying the front panel with you, use the
supplied front panel case.
RESET button
continue to next page t
1
2
8
Attaching the front panel
Place hole A of the front panel onto the spindle
B on the unit, then lightly push the left side in.
Note
Do not put anything on the inner surface of the front
panel.
Setting the clock
The clock uses a 24-hour digital indication.
Example: To set the clock to 10:08
1 Press (MENU), then press either side
of (DISC/PRESET) or (PRESET)
repeatedly until CLOCK appears.
1Press (ENTER).
The hour indication flashes.
2Press either side of (DISC/PRESET)
or (PRESET) to set the hour.
3Press the (+) side of (SEEK).
The minute indication flashes.
4Press either side of (DISC/PRESET)
or (PRESET) to set the minute.
2 Press (ENTER).
The clock starts. After the clock setting is
completed, the display returns to normal play
mode.
Tips
You can set the clock automatically with the RDS
feature (page 15).
When D.INFO mode is set to ON, the time is always
displayed (page 18).
x
9
Cassette Player
Listening to a tape
1 Press (OPEN) and insert a cassette.
Playback starts automatically.
2 Close the front panel.
If a cassette is already inserted, press (SOURCE)
repeatedly until FORWARD or REVERSE
appears to start playback.
FORWARD: The side facing up is played.
REVERSE: The side facing down is played.
Note
The AMS function may not work when:
the blanks between tracks are shorter than 4
seconds.
there is noise between tracks.
there are long sections of low volume or quiet
sections.
Playing a tape in various
modes
You can play the tape in various modes:
METAL lets you play a metal or CrO
2 tape.
BL.SKP (Blank Skip) skips blanks longer than
8 seconds.
ATA (Automatic Tuner Activation) turns on the
tuner automatically when fast-winding the tape.
1 During tape playback, press (MENU).
2 Press either side of (DISC/PRESET) or
(PRESET) repeatedly until the desired
mode appears.
3 Press (+) side of (SEEK) to select
ON.
Example: ATA mode
Play mode starts.
4 Press (ENTER).
To return to normal playback mode, select
OFF in step 3.
Playing tracks repeatedly
— Repeat Play
During playback, press (3) (REP)
repeatedly until REP-ON in the
display appears.
To return to normal playback mode, select REP-
OFF.
Tip
During repeat playback, press (MODE). REP
disappears from the display and repeat mode is
cancelled.
To Press
Change the tapes
playback direction
(MODE) (o)
Stop playback (OFF)
Eject the cassette (OPEN) then Z
Skip tracks
Automatic
Music Sensor
(SEEK) (./>)
[once for each track]
Fast-forward/
reverse
Manual Search
(SEEK) (m/M)
[hold to desired point]
10
Radio
The unit can store up to 6 stations per band
(FM1, FM2, FM3, MW, and LW).
Caution
When tuning in stations while driving, use Best
Tuning Memory to prevent accidents.
Storing stations
automatically
Best Tuning Memory (BTM)
The unit selects the stations with the strongest
signals within the selected band, and stores them
in the order of their frequency.
1 Press (SOURCE) repeatedly to select
the radio.
2 Press (MODE) repeatedly to select the
band.
3 Press (MENU), then press either side
of (DISC/PRESET) or (PRESET)
repeatedly until BTM appears.
4 Press (ENTER).
A beep sounds when the setting is stored.
Notes
If only a few stations can be received due to weak
signals, some number buttons will retain their former
settings.
When a number is indicated in the display, the unit
starts storing stations from the one currently
displayed.
Receiving the stored stations
1 Press (SOURCE) repeatedly to select
the radio.
2 Press (MODE) repeatedly to select the
band.
3 Press the number button ((1) to (6))
on which the desired station is stored.
Tip
Press either side of (DISC/PRESET) or (PRESET) to
receive the stations in the order they are stored in the
memory (Preset Search function).
If preset tuning does not work
Press either side of (SEEK) to search
for the station (automatic tuning).
Scanning stops when the unit receives a
station. Repeat until the desired station is
received.
Tips
If automatic tuning stops too frequently, turn on the
Local Seek to limit seek to stations with stronger
signals (see Changing the sound and display
settings on page 18).
If you know the frequency of the station you want to
listen to, press and hold either side of (SEEK) to
locate the approximate frequency, then press
(SEEK) repeatedly to fine adjust to the desired
frequency (manual tuning).
If FM stereo reception is poor
Select monaural reception mode.
(see Changing the sound and display
settings on page 18). The sound improves,
but becomes monaural (ST disappears).
11
Storing only the desired
stations
You can manually preset the desired stations on
any chosen number button.
1 Press (SOURCE) repeatedly to select
the radio.
2 Press (MODE) repeatedly to select the
band.
3 Press either side of (SEEK) to tune in
the station that you want to store.
4 Press the desired number button ((1)
to (6)) for 2 seconds until MEM
appears.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.
Tuning in a station through a
list (XR-CA600X/CA600V/
CA600 only)
List-up
1 During radio reception, press (LIST)
momentarily.
The frequency or the name assigned to the
station currently tuned in flashes.
2 Press either side of (DISC/PRESET)
repeatedly until you find the desired
station.
If no name is assigned to the selected station,
the frequency appears in the display.
3 Press (ENTER) to tune in the desired
station.
12
RDS
Overview of RDS
FM stations with Radio Data System (RDS)
service send inaudible digital information along
with the regular radio programme signal. For
example, one of the following will be displayed
upon receiving a station with RDS capability.
RDS services
RDS data offers you other conveniences, such as:
Automatic retuning of a programme, helpful
during long-distance drives. AF t page 12
Receiving traffic announcements, even
when enjoying another programme/source.
TA t page 13
Selecting stations by the type of programme
it broadcasts. PTY t page 14
Automatic clock time setting. CT t page
15
Notes
Depending on the country or region, not all of the
RDS functions are available.
RDS may not work properly if the signal strength is
weak or if the station you are tuned to is not
transmitting RDS data.
Automatic retuning for best
reception results
AF function
The alternative frequencies (AF) function allows
the radio to always tune into the areas strongest
signal for the station you are listening to.
1 Select an FM station (page 10).
2 Press (AF) repeatedly until AF-ON
appears.
The unit starts searching for an alternative
frequency with a stronger signal in the same
network.
If NO AF flashes, the currently tuned into
station does not have an alternative frequency.
Note
When there is no alternative frequency in the area or
when you do not need to search for one, turn the AF
function off by selecting AF-OFF.
To Press
Switch display
item
(DISPLAY/PTY) or
(PTY/DSPL)
Displayable items
Music source
Clock
Function
Displayable items
Station name (frequency)
Programme type
Frequencies change automatically.
98.5 MHz
Station
102.5 MHz
96.0 MHz
13
For stations without alternative
frequencies
Press either side of (SEEK) while the
station name is flashing (within 8
seconds).
The unit starts searching for another
frequency with the same PI (Programme
Identification) data (PI SEEK appears).
If the unit cannot find the same PI, the unit
returns to the previously selected frequency.
Staying with one regional programme
When AF function is on: this units factory-set
setting restricts reception to a specific region, so
you wont be switched to another regional station
with a stronger frequency.
If you leave this regional programmes reception
area or would like to take advantage of the whole
AF function, select REG-OFF from the MENU
(page 18).
Note
This function does not work in the United Kingdom
and in some other areas.
Local Link function
(United Kingdom only)
This function enables you to select other local
stations in the area, even if they are not stored on
your number buttons.
1 Press a number button ((1) to (6))
that has a local station stored on it.
2 Within 5 seconds, press the number
button of the local station again.
3 Repeat this procedure until the
desired local station is received.
Receiving traffic
announcements
TA/TP
By activating the Traffic Announcement (TA)
and Traffic Programme (TP), you can
automatically tune in an FM station broadcasting
traffic announcements. These settings function
regardless of the current FM programme/source,
CD/MD; the unit switches back to the original
source when the bulletin is over.
Press (TA) repeatedly until TA-ON
appears.
The unit starts searching for traffic
information stations.
TP indicates reception of such stations, and
TA flashes during an actual traffic
announcement. The unit will continue
searching for stations available with TP if
NO TP is indicated.
To cancel all traffic announcements, select TA-
OFF.
Tip
You can also cancel the current announcement by
pressing (SOURCE) or (MODE).
Presetting the volume of traffic
announcements
You can preset the volume level of the traffic
announcements so you wont miss hearing them.
1 Turn the volume control dial to adjust
the desired volume level.
2 Press (TA) for 2 seconds.
TA appears and the setting is stored.
Receiving emergency announcements
If either AF or TA is on, the unit will switch to
emergency announcements, if one comes in
while listening to an FM station, a tape, or
optional CD/MD.
To Press
Cancel current
announcement
(TA)
14
Presetting RDS stations with
AF and TA setting
When you preset RDS stations, the unit stores
each stations AF/TA setting (on/off) as well as
its frequency. You can select a different setting
(for AF, TA, or both) for individual preset
stations, or the same setting for all preset
stations. If you preset stations with AF-ON the
unit automatically stores stations with the
strongest radio signal.
Presetting the same setting for all
preset stations
1 Select an FM band (page 10).
2 Press (AF) and/or (TA) to select AF-
ON and/or TA-ON.
Note that selecting AF-OFF or TA-OFF
stores not only RDS stations, but also non-
RDS stations.
3 Press (MENU), then press either side
of (DISC/PRESET) or (PRESET)
repeatedly until BTM appears.
4 Press (ENTER) until BTM flashes.
Presetting different settings for each
preset station
1 Select an FM band, and tune in the
desired station (page 11).
2 Press (AF) and/or (TA) to select AF-
ON and/or TA-ON.
3 Press the desired number button ((1)
to (6)) until MEM appears.
Repeat from step 1 to preset other stations.
Tuning in stations by
programme type
PTY
You can tune in a station by selecting the type of
programme you would like to listen to.
Note
You cannot use this function in some countries where
no PTY (Programme Type selection) data is available.
Programme types Display
News NEWS
Current Affairs AFFAIRS
Information INFO
Sports SPORT
Education EDUCATE
Drama DRAMA
Culture CULTURE
Science SCIENCE
Va ri ed VAR IE D
Popular Music POP M
Rock Music ROCK M
Easy Listening EASY M
Light Classical LIGHT M
Classical CLASSICS
Other Music Type OTHER M
Weather WEATHER
Finance FINANCE
Childrens Programmes CHILDREN
Social Affairs SOCIAL A
Religion RELIGION
Phone In PHONE IN
Travel TRAVEL
Leisure LEISURE
Jazz Music JAZZ
Country Music COUNTRY
National Music NATION M
Oldies Music OLDIES
Folk Music FOLK M
Documentary DOCUMENT
15
1 Press (DISPLAY/PTY) or (PTY/DSPL)
during FM reception until PTY
appears.
The current programme type name appears if
the station is transmitting the PTY data.
- - - - - - - - appears if the received station is
not an RDS station, or if the RDS data is not
received.
2 Press (DISC/PRESET ) or (PRESET)
repeatedly until the desired
programme type appears.
The programme types appear in the order
shown in the table.
- - - - - - - - appears if the programme type
is not specified in the RDS data.
3 Press (ENTER).
The unit starts searching for a station
broadcasting the selected programme type.
Setting the clock
automatically
CT
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
1 During radio reception, press (MENU),
then press either side of
(DISC/PRESET) or (PRESET) repeatedly
until CT-OFF appears.
2 Press the (+) side of (SEEK) repeatedly
until CT-ON appears.
The clock is set.
3 Press (ENTER) to return to the normal
display.
To cancel the CT function, select CT-OFF in
step 2.
Notes
The CT function may not work even though an RDS
station is being received.
There might be a difference between the time set by
the CT function and the actual time.
16
Other Functions
You can also control the unit (and optional CD/
MD units*
1
) with a rotary commander
(optional).
Using the rotary commander
First, attach the appropriate label depending on
how you want to mount the rotary commander.
The rotary commander works by pressing
buttons and/or rotating controls.
By pressing buttons
*1 XR-CA600X/CA600V/CA600 only
*2 Only if the corresponding optional equipment is
connected (XR-CA600X/CA600V/CA600 only).
*3 If your car has no ACC (accessory) position on the
ignition key switch, be sure to press (OFF) for 2
seconds to turn off the clock indication after turning
off the ignition.
By rotating the control
Rotate and release to:
Locate the beginning of tracks on the tape.
Tune in stations automatically.
Skip tracks on the disc.*
2
Rotate, hold, and release to:
Fast-wind the tape.
Find a station manually.
Fast-forward/reverse a track.*
2
Tip
To start playback while fast-winding the tape, press
(MODE).
By pushing in and rotating the control
Push in and rotate the control to:
Receive preset stations.
Change the disc*
2
.
Press To
(SOURCE)
Change source
(radio/CD*
2
/MD*
2
/Tape)
(MODE)
Change operation
(radio band/CD unit*
2
/MD
unit*
2
/tape playback
direction)
(ATT) Attenuate sound
(OFF)*
3
Stop playback or radio
reception
(SOUND) Adjust the sound menu
(DSPL) Change the display item
SOUND
DSPL
MODE
SOUND
DSPL
MODE
OFF
Rotate the VOL control
to adjust the volume.
(SOURCE)
(SOUND)
(ATT)
(MODE)
(DSPL)
(OFF)
SEEK/AMS
control
PRESET/
DISC control
17
Changing the operative direction
The operative direction of controls is factory-set
as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press (SOUND) for 2 seconds while
pushing the VOL control.
Tip
You can also change the operative direction of these
controls with the unit (see Changing the sound and
display settings on page 18).
Adjusting the sound
characteristics
You can adjust the bass, treble, balance, and
fader.
The bass and treble levels can be stored
independently for each source.
1 Select the item you want to adjust by
pressing (SOUND) repeatedly.
Each time you press (SOUND), the item
changes as follows:
BAS (bass) t TRE (treble) t BAL (left-
right)
t FAD (front-rear)
2 Adjust the selected item by pressing
either side of (SEEK).
When adjusting with the rotary commander,
press (SOUND) and rotate the VOL control.
Note
Adjust within 3 seconds after selecting the item.
Quickly attenuating the
sound
(With the rotary commander or the card
remote commander)
Press (ATT) on the rotary commander
or card remote commander.
After AT T- ON momentarily appears, the
AT T appears in the display.
To restore the previous volume level, press
(ATT) again.
Tip
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).
To increase
To decrease
18
Changing the sound and
display settings
Menu
The following items can be set:
SET (Set Up)
CLOCK (page 8)
CT (Clock Time) (page 15)
BEEP to turn the beeps on or off.
RM (Rotary Commander) to change the
operative direction of the controls of the rotary
commander.
Select NORM to use the rotary commander
as the factory-set position.
Select REV when you mount the rotary
commander on the right side of the steering
column.
DSPL (Display)
D.INFO (Dual Information) to display the
clock and the play mode at the same time (ON).
AMBER/GREEN to change the
illumination colour to amber or green (XR-
CA600/L500 only).
DIM (Dimmer) to change the brightness of
the display (XR-CA600V/L500V only).
Select ON to dim the display.
Select OFF to deactivate the Dimmer.
M.DSPL (Motion Display) to select the
Motion Display mode from 1, 2, and
OFF.
Select 1 to show decoration lines in the
display and activate Demo display.
Select 2 to show decoration lines in the
display and deactivate Demo display.
Select OFF to deactivate the Motion
Display.
A.SCRL (Auto Scroll)*
Select ON to scroll all automatically
displayed names exceeding 8 characters.
When Auto scroll is set to off and the disc/
track name is changed, the disc/track name
does not scroll.
* When no CD or MD is playing, this item will not
appear. (XR-CA600X/CA600V/CA600 only)
SND (Sound)
LOUD (Loudness) to enjoy bass and treble
even at low volumes. The bass and treble will
be reinforced (XR-CA600V/CA600/L500V/
L500 only).
P/M (Play Mode)
LOCAL-ON/OFF (Local seek mode) (page 10)
Select ON to only tune into stations with
stronger signals.
MONO-ON/OFF (Monaural mode) (page 10)
Select ON to hear FM stereo broadcast in
monaural. Select OFF to return to normal
mode.
REG-ON/OFF (Regional) (page 13)
1 Press (MENU).
To set A.SCRL, press (MENU) during CD/
MD Playback.
2 Press either side of (DISC/PRESET ) or
(PRESET) repeatedly until the desired
item appears.
3 Press the (+) side of (SEEK) to select
the desired setting (Example: ON or
OFF).
4 Press (ENTER).
After the mode setting is completed, the
display returns to normal play mode.
Note
The displayed item will differ depending on the source.
Tip
You can easily switch among categories (SET,
DSPL, SND, P/M, and EDIT) by pressing either
side of (DISC/PRESET) or (PRESET) for 2 seconds.
19
Selecting the sound position
My Best sound Position (MBP)
When you drive without passengers, you can
enjoy the most comfortable sound environment
with My Best sound Position.
My Best sound Position has two presets, which
adjust the sound level of balance and fader. You
can select one very easily with the MBP button.
Press (MBP) repeatedly for the desired
listening position.
The mode of My Best sound Position is
shown in the display in order of the table.
After one second, the display goes back to the
normal playback mode.
If you want to adjust the sound level of
balance and fader more precisely, you can do
it using the (SOUND) button (see Adjusting
the sound characteristics on page 17).
Notes
When the BAL (balance) or FAD (fader) in Adjusting
the sound characteristics (page 17) is adjusted, the
MBP setting returns to OFF.
When MBP is set to OFF, the BAL and FAD setting is
activated.
Setting the equalizer
You can select an equalizer curve for seven
music types (XPLOD, VOCAL, CLUB, JAZZ,
NEW AGE, ROCK, CUSTOM, and OFF
(equalizer OFF)).
You can store and adjust the equalizer settings
for frequency and level.
Selecting the equalizer curve
1 Press (SOURCE) to select a source
(radio, CD, MD, or tape).
2 Press (EQ7) repeatedly until the
desired equalizer curve.
Each time you press (EQ7), the item
changes.
To cancel the equalizing effect, select OFF.
After 3 seconds, the display returns to the
normal playback mode.
Adjusting the equalizer curve
1 Press (MENU).
2 Press either side of (DISC/PRESET) or
(PRESET) repeatedly until EQ7
TUNE appears, then press (ENTER).
3 Press either side of (SEEK) to select
the desired equalizer curve, then
press (ENTER).
Each time you press (SEEK), the item
changes.
Display
window
Balance Level Fader Level
Right Left Front Rear
MBP-A
4dB 0 0 4dB
MBP-B 0 4dB 0 4dB
MBP-OFF
0000
continue to next page t
20
4 Select the desired frequency and level.
1 Press either side of (SEE K) to select
the desired frequency.
Each time you press (SEEK), the
frequency changes.
62 (Hz) y 157 (Hz) y 396 (Hz) y
1k (Hz) y 2.5k (Hz) y 6.3k (Hz) y
16k (Hz)
2 Press either side of (DISC/PRESET )
or (PRESET) to adjust the desired
volume level.
The volume level is adjustable by 1 dB
steps from 10 dB to +10 dB.
To restore the factory-set equalizer curve,
press (ENTER) for 2 seconds.
5 Press (MENU) twice.
When the effect setting is complete, the
normal playback mode appears.
CD/MD Unit (optional)
(XR-CA600X/CA600V/CA600
only)
This unit can control external CD/MD units.
If you connect an optional CD unit with the CD
TEXT function and the custom file function, the
CD TEXT information will appear in the display
when you play a CD TEXT disc.
Playing a CD or MD
1 Press (SOURCE) repeatedly to select
CD or MD.
2 Press (MODE) repeatedly until the
desired unit appears.
CD/MD playback starts.
To Press
Stop playback (OFF)
Skip discs
Disc selection
(DISC/PRESET) (+/)
Skip tracks
Automatic
Music Sensor
(SEEK) (./>)
[once for each track]
Fast-forward/
reverse
Manual Search
(SEEK) (m/M)
[hold to desired point]
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146

Sony XR-CA600 Instrukcja obsługi

Kategoria
Radioodbiorniki samochodowe
Typ
Instrukcja obsługi
Ten podręcznik jest również odpowiedni dla