Whirlpool I5GMH6AG(X) U instrukcja

English

GB

Operating Instructions

COOKER AND OVEN

Contents

Operating Instructions,1

Description of the appliance-Overall view,5

Description of the appliance-Control Panel,6

Installation,7

Start-up and use,12

Cooking modes,13

Precautions and tips,19

Care and maintenance,20

Assistance,20

Polski

PL

Instrukcja obsługi

KUCHENKA I PIEKARNIK

Spis treści

Instrukcja obsługi,1

Opis urządzenia-Widok ogólny,5

Opis urządzenia-Panel sterowania,6

Instalacja,23

Uruchomienie i użytkowanie,29

Użytkowanie piekarnika,30

Zalecenia i środki ostrożności,36

Konserwacja i utrzymanie,37

Serwis Techniczny,37

LT

Lietuviu

Naudojimo instrukcijos

viryklë ir orkaitë

Turinys

Naudojimo instrukcijos,1

Prietaiso aprašymas -Bendras vaizdas,5

Prietaiso aprašymas -Valdymo pultas,6

Montavimas,40

Ájungimas ir naudojimas,45

Orkaitës naudojimas,46

Atsargumo priemonës ir patarimai,52

Techninë prieţiűra,53

Pagalba,53

LV

Latviešu

Lietođanas instrukcija

PLÎTS UN KRASNS

Saturs

Lietođanas instrukcija,1

Ierîces apraksts -Vispârîga informâcija,5

Ierîces apraksts - Vadîbas panelis,6

Uzstâdîđana,55

Ieslçgđana un lietođana,60

Cepeđkrâsns lietođana,61

Piesardzîbas pasâkumi un ieteikum,66

Tehniskâ apkope un kopđana,67

Palîdzîba,67

EE

Eesti keeles

Kasutusjuhend

PLIIT JA AHI

Sisukord

Kasutusjuhend,1

Seadme kirjeldus - Ülevaade,5

Seadme kirjeldus - Juhtpaneel,6

Paigaldamine,69

Esmakäitamine ja kasutamine, 74

Pliidi kasutamine,75

Ettevaatusabinőud ja soovitused, 81

Hooldus,82

Klienditugi,82

LietuviuLietuviu

Spis treści

Instrukcja obsługi

KUCHENKA I PIEKARNIK

Naudojimo instrukcijos

viryklë ir orkaitë

Turinys

Latviešu

Lietođanas instrukcija

PLÎTS UN KRASNS

Saturs

Kasutusjuhend

PLIIT JA AHI

Sisukord

English

WARNING

UWAGA

ĮSP

Ė

JIMAS

BR ĪDINĀ

JUMS

HOIATUS

,2

,3

,4

I5TMH6AG U

I5GMH6AG.1 U

I5GMH6AG U

I5TMH5AG.1 U

I5GMH2AG U

I5GMH5AG U

I5GMHA U

I5GMH1A U

I5GMH5AG U

I5GMH6AG U

GB

PL

WARNING: The appliance and its

accessible parts become hot during

use.

Care should be taken to avoid

touching heating elements.

Children less than 8 years of age shall

be kept away unless continuously

supervised.

This appliance can be used by

children aged from 8 years and

above and persons with reduced

physical, sensory or mental

capabilities or lack of experience

and knowledge if they have been

given supervision or instruction

concerning use of the appliance in a

safe way and understand the hazards

involved. Children shall not play with

the appliance. Cleaning and user

maintenance shall not be made by

children without supervision.

WARNING: Unattended cooking on a

hob with fat or oil can be dangerous

and may result in fire.

NEVER try to extinguish a fire with

water, but switch off the appliance

and then cover flame e.g. with a lid or

a fire blanket.

Do not use harsh abrasive cleaners

or sharp metal scrapers to clean

the oven door glass since they can

scratch the surface, which may result

in shattering of the glass.

The internal surfaces of the

compartment (where present) may

become hot.

Never use steam cleaners or pressure

cleaners on the appliance.

Remove any liquid from

the lid before opening it.

Do not close the glass cover (if present)

when the gas burners or electric

hotplates are still hot.

WARNING: Ensure that the appliance is

switched off before replacing the lamp

to avoid the possibility of electric shock.

CAUTION: the use of inappropriate hob

guards can cause accidents.

WARNINGWARNING

UWAGA: To urządzenie oraz jego dostępne

części silnie się rozgrzewają podczas użyt-

kowania.

Należy uważać, aby nie dotknąć elementów

grzejnych.

Nie pozwalać, aby dzieci poniżej 8 roku

życia zbliżały się do urządzenia, jeśli nie są

pod stałym nadzorem dorosłych.

Z niniejszego urządzenia mogą korzystać

dzieci powyżej 8 roku życia i osoby o ogra-

niczonych zdolnościach  zycznych, zmy-

słowych bądź umysłowych, jak również

osoby nieposiadające doświadczenia lub

znajomości urządzenia, jeśli znajdują się

one pod nadzorem innych osób lub jeśli

zostały pouczone na temat bezpiecznego

sposobu użycia urządzenia oraz zdają sobie

sprawę ze związanych z nim zagrożeń.

Dzieci nie powinny bawić się urządzeniem.

Prace związane z czyszczeniem i konserwa-

cją nie mogą być wykonywane przez dzieci,

jeśli nie są one nadzorowane.

UWAGA: Pozostawienie bez nadzoru na

kuchence tłuszczów i olejów może być nie-

bezpieczne i może spowodować pożar.

Nie należy NIGDY próbować ugasić pło-

mieni/pożaru wodą; należy wyłączyć urzą-

dzenie i przykryć płomień np. pokrywką

lub ognioodpornym kocem.

UWAGAUWAGA

2

! When you place the rack inside,

make sure that the stop is directed

upwards and in the back of the cavity.

LT

LV

Nie stosować środków ściernych ani

ostrych łopatek metalowych do czyszczenia

szklanych drzwiczek piekarnika, ponieważ

mogłyby porysować powierzchnię i spowo-

dować pęknięcie szyby.

Wewnętrzne powierzchnie szu ady (jeśli

jest w danym modelu) mogą się nagrzewać.

Nie stosować nigdy oczyszczaczy parowych

lub ciśnieniowych do czyszczenia urządze-

nia.

Usunąć ewentualne płyny na pokrywie

przed jej otwarciem. Nie zamykać szklanej

pokrywy (jeśli jest częścią wyposażenia),

jeśli palniki gazowe lub płyta elektryczna są

jeszcze rozgrzane.

UWAGA: Przed wymianą żarówki, należy

się upewnić, że urządzenie jest wyłączone,

aby uniknąć ryzyka porażenia prądem.

UWAGA: użycie niewłaściwych zabezpie-

czeń płyty może być przyczyną wypadków.

ĮSPĖJIMAS! Naudojamo prietaiso pavi-

ršiai ir pasiekiamos dalys įkaista.

Būkite atsargūs ir neprisilieskite prie

įkaitusių prietaiso dalių.

Jaunesni nei 8 metų vaikai gali būti

prileidžiami prie prietaiso tik prižiūrimi

suaugusiųjų.

Vyresni nei 8 metų vaikai ir asmenys, tu-

rintys ﬁ zinių, jutimo ar psichinių sutrikimų

arba nepakankamai žinių ar patirties,

šiuo prietaisu gali naudotis tik tuo atveju,

jei jie yra prižiūrimi arba instruktuojami,

kaip saugiai naudoti prietaisą, taip pat

supranta kylančias grėsmes. Vaikams

turi būti draudžiama žaisti su prietaisu.

Neprižiūrimi vaikai taip pat negali valyti

prietaiso ar atlikti jo priežiūros darbų.

ĮSPĖJIMAS! Ant įjungtos viryklės palikti

indai su riebalais ar aliejumi gali sukelti

gaisrą.

NIEKADA nebandykite liepsnos gesinti

vandeniu – išjunkite prietaisą ir kuo nors

uždenkite liepsną, pavyzdžiui, dangčiu

arba priešgaisriniu apklotu.

Orkait

ės dureli

ų

stiklo nevalykite šiur-

kščiomis valymo priemonėmis arba

aštriais metaliniais šveistukais, priešin-

gu atveju kyla grėsmė subraižyti sti-

klo paviršių, o dėl to stiklas paprastai

sutrūkinė

ja.

Vidiniai stalčiaus (kur yra) paviršiai gali

į

kaisti.

Niekuomet nevalykite prietaiso gariniais

ar slė

giniais valikliais.

Prieš atidarydami gaubtą nuo jo nuvaly-

kite skysčius.

Neuždarykite stiklinio dangčio (jei su-

montuotas), kol dujiniai degikliai arba

elektrinės kaitlentės neatvėso.

ĮSPĖJIMAS

Į

SPĖJIMAS! prieš keisdami lemputę

elektros prietaisą atjunkite nuo elektros

maitinimo tinklo – nepatirsite elektros

smūgio.

ATSARGIAI! Netinkamų viryklės

apsaugų naudojimas gali sukelti nela-

imingą atsitikimą

BRĪDINĀJUMS! Ierīce lietošanas laikā

stipri sakarst.

Nepieskarieties sakarsušajām ierīces

daļām.

Bērni, kuri ir jaunāki par astoņiem ga-

diem, drīkst atrasties ierīces tuvumā tikai

stingrā pieaugušo uzraudzībā.

Ierīci drīkst lietot bērni, kuri ir sasnie-

guši astoņu gadu vecumu, bet perso-

nas ar ierobežotām ﬁ ziskajām, maņu

vai garīgajām spējām un personas,

kurām nav ierīces lietošanas pieredzes

vai nepieciešamo zināšanu, tikai tad,

BRĪDINĀJUMSBRĪDINĀJUMS

ĮSPĖJIMAS

3

! Wsuwając ruszt, naleĪy siĊ upew-

niü, Īe ogranicznik jest skierowany ku

górze i znajduje siĊ on w tylnej czĊĞci

komory.

! Padơklą Ƴstumdami Ƴ orkaitĊ

Ƴsitikinkite, kad stabdiklis nukreiptas Ƴ

viršǐ, ir Ƴsistumtǐ iki angos galo.

rotaļāties ar ierīci. Bērni nedrī

kst bez

uzraudzības tīrīt ierīci un veikt tās apko

pi.

BRĪDINĀJUMS! Atstājot uz ieslēgtas

plīts virsmas pannu ar taukiem vai eļļu,

radīsit ugunsgrēka risku.

NEKĀDĀ GADĪJUMĀ nemēģiniet dzēst

uguni ar ūdeni, bet izslēdziet plīti un

nosedziet liesmu ar vāku vai nedegošu

pārsegu.

un iespējamajiem riskiem. Bērni nedrīkst

Cepeškrāsns durvju stiklu nedrīkst tīrīt ar

abrazīviem tīrīšanas līdzekļiem vai asiem

metāla skrāpjiem, jo tie bojā durvju vir-

smu un cepeškrāsns stikls var saplīst.

Papildu nodalījuma (ja cepeškrāsns ar to

ir aprīkota) iekšpuse lietošanas laikā var

sakarst.

Ierīci nedrīkst tīrīt ar tvaika vai augstspie-

diena tīrītājiem.

Pirms pārsega atvēršanas notīriet no tā

visu šķidrumu.

Ja gāzes degļi vai elektriskās sildīšanas

virsmas joprojām ir karstas, stikla

pārsegu (ja tāds ir) nedrīkst aizvērt.

BRĪDINĀJUMS! Pirms cepeškrāsns

lampiņas nomaiņas pārbaudiet, vai

ierīce ir izslēgta, lai nomaiņas laikā

novērstu elektriskās strāvas trieciena

risku.

UZMANĪBU! Neatbilstošu plīts virsmas

aizsargu lietošana var izraisīt nelaimes

gadījumus.

EE

HOIATUS: sisselülitatud seade ja selle

juurdepääsetavad osad muutuvad kasu-

tamise ajal kuumaks.

Olge ettevaatlik ja vältige kontakti kütte-

elementidega.

Alla 8-aastased lapsed tuleb hoida se-

admest eemal, v.a. juhul, kui nendele on

tagatud pidev järelevalve.

Vanemad kui 8-aastased lapsed ja isi-

kud, kellel on vähenenud füüsilised,

meelelised või vaimsed võimed või vähe-

sed kogemused ja oskused, võivad seda

seadet kasutada juhul, kui on tagatud

nende järeelvalve ning neile on antud

juhised seadme ohutuks kasutamiseks

ja nad mõistavad seadme kasutamisest

tulenevaid ohte.

Lapsed ei tohi seadmega mängida.

Lapsed võivad seadet puhastada ja ho-

oldada ainult siis, kui on tagatud nende

järelevalve.

HOIATUS: rasvas või õlis küpseva toidu

jätmine keeduplaadile järelevalveta on

ohtlik ja võib põhjustada tulekahju.

Tulekahju kustutamiseks ÄRGE kasu-

tage vett, vaid lülitage seade välja ja

seejärel katke leek näiteks kaane või

tuletekiga.

Ärge kasutage ahju klaasukse puha-

stamiseks tugevatoimelisi abrasiivseid

puhastusvahendeid, sest need võivad

kriimustada pinda ja klaas võib pragune-

da.

Panipaiga (kui on) sisepinnad võivad

muutuda kuumaks.

Ärge kasutage seadme puhastamiseks

auru- ega survepuhastusseadmeid.

Enne kaane avamist eemaldage sellele

kogunenud vedelik.

Ärge sulgege klaaskaant (kui on ole-

mas), kui gaasipõletid või elektrilised

keeduplaadid on veel kuumad.

HOIATUS: enne lambi väljavahetamist

veenduge, et seade on välja lülitatud –

elektrilöögioht!

TÄHELEPANU: valede keeduplaadipiire-

te kasutamine võib põhjustada õnnetusi.

HOIATUSHOIATUS

4

ja tās tiek uzraudzītas vai ir atbilstoši

informētas par ierīces drošu lietošanu

! Ievietojot režƧi, pƗrliecinieties, ka

apturƝtƗjs ir vƝrsts augšup un atrodas

dobuma aizmugurƝ.

! Kui lükkate resti ahju, siis jälgige, et

piiraja jääb ülespoole, õõnsuse taha.

5

1.Hob burner

2.Hob Grid

3.Control panel

4.Sliding grill rack

5.DRIPPING pan

6..Adjustable foot

7.Containment surface for spills

8.GUIDE RAILS for the sliding racks

9.position 5

10.position 4

11.position 3

12.position 2

13.position 1

14.Glass Cover *

Description of the appliance

Overall view

GB

PL

1.Palnik gazowy

2. Ruszta płyty podpalnikowej

3.Panel kontrolny

4.Półka ruszt

5.Półka brytfanna

6.Nóżki regulowane

7. Płyta podpalnikowa

8.Prowadnice półek

9.pozycja 5

10.pozycja 4

11.pozycja 3

12.pozycja 2

13.pozycja 1

14.Szklana pokrywa*

Opis urządzenia

Widok ogólny

1. Dujų degiklis

2.Kaitlentès tinklelis

3.Valdymo pultas

4.KEPSNINÈ

5.SURINKIMO INDAS

6. Reguliuojamoji kojelè

7.TIškalų sulaikymo paviršius

8.Slankiųjų grotelių TAKELIAI

9.padètis 5

10.padètis 4

11.padètis 3

12.padètis 2

13.padètis 1

14.Stiklinis gaubtas*

*Yra tik tam tikruose modeliuose

Prietaiso aprađymas

Bendras vaizdas

LT

1.Gćzes deglis

2.Plīts virsmas režģisģ

3.Vadības panelis

4.GRILĒŠANA

5.CEPE TAUKU PANNA

6. Regulējama kāja

7.Norobe˛ota virsma traipiem

8.VADOTNES slīdošo pamatņu ievietošanai un izņemšanai

9.pozīcija 5

10.pozīcija 4

11.pozīcija 3

12.pozīcija 2

13.pozīcija 1

14.Stikla pārsegs*

*Pieejams tikai noteiktiem modeļiem

Ierîces apraksts

Vispariga informacija

LV

1.Gaasipõleti

2.Rest

3.Juhtpaneel

4.GRILL

5.TILGAPANN

6. Reguleerimisjalg

7.Tilgaalus

8.SIINID restide sisestamiseks

9.tasand 5

10.tasand 4

11.tasand 3

12.tasand 2

13. tasand 1

14.Klaaskate*

*Ainult mőnedel mudelitel

Seadme kirjeldus

Ülevaade

EE

1

2

3

4

5

6

7

8

9

10

11

12

13

6

14

*Tylko w niektórych modelach

*Available only on certain models

GB

6

Description of the appliance

Control panel

GB

PL

Opis urządzenia

Panel kontrolny

Ierîces apraksts

Vispariga informacija

LV

Seadme kirjeldus

Juhtpaneel

EE

Prietaiso aprađymas

Valdymo pultas

LT

1.TIMER knob*

2.Electronic cooking programmer*

3.TIMER button*

4.COOKING TIME button*

5.COOKING END TIME button*

6.THERMOSTAT knob

7.SELECTOR knob

8.THERMOSTAT indicator light

9.Hob BURNER control knob

1.Pokrętło MINUTNIKA*

2.Programator elektroniczny*

3.Przycisk MINUTNIKA*

4.Przycisk CZASU PIECZENIA*

5.Przycisk KOŃCA CZASU PIECZENIA*

6.Pokrętło TERMOSTATU

7.Pokrętło PROGRAMÓW PIEKARNIKA

8.Lampka kontrolna TERMOSTATU

9.Pokr ętło PALNIKÓW PŁYTY GRZEJNEJ

1.LAIKMAČIO rankenčlč *

2.Elektroninč virimo programa*

3.LAIKMAČIO mygtukas*

4.VIRIMO LAIKO mygtukas*

5.VIRIMO PABAIGOS LAIKO mygtukas*

6.TERMOSTATO rankenčlč

7.PARINKIMO rankenčlč

8.Indikacinč TERMOSTATO lemputč

9.Kaitlent čs dujř degikilř valdymo rankenčlčs

*Yra tik tam tikruose modeliuose

1.TAIMERA slēdzis*

2.ELEKTRONISKAIS GATAVOŠANAS PROGRAMMĒTĀJS*

3.TAIMERA poga*

4.GATAVOŠANAS LAIKA poga*

5.GATAVOŠANAS BEIGU LAIKA poga*

6.TERMOSTATA slēdzis

7.TERMOSTATA indikatora gaisma

8.SELEKTORA slēdzis

9.DEG ĻA vadības slēdzi

*Pieejams tikai noteiktiem modeļiem

1.TAIMERI nupp*

2.Elektrooniline küpsetusprogrammeerija*

3.TAIMERI nupp*

4.KÜPSETUSAJA nupp*

5.KÜPSETUSE LOPUAJA nupp

6.TERMOSTAADI nupp

7.VALIKUlüliti

8.TERMOSTAADI näidikutuli

9.POLETITE reguleernupp

*Ainult mőnedel mudelitel

*Available only on certain models

*

Tylko w niektórych modelach

9

7

6

9

7

6

8

3

2

9

7

6

8

9

8

7

6

1

9

7

8

6

2

3

5

4

1

8

7

GB

! Before operating your new appliance please read

this instruction booklet carefully. It contains important

information concerning the safe installation and

operation of the appliance.

! Please keep these operating instructions for future

reference. Make sure that the instructions are kept with

the appliance if it is sold, given away or moved.

! The appliance must be installed by a qualified

professional according to the instructions provided.

! Any necessary adjustment or maintenance must be

performed after the cooker has been disconnected

from the electricity supply.

Room ventilation

The appliance may only be installed in permanently-

ventilated rooms, according to current national

legislation. The room in which the appliance is installed

must be ventilated adequately so as to provide as

much air as is needed by the normal gas combustion

process (the flow of air must not be lower than 2 m

3

/h

per kW of installed power).

The air inlets, protected by grilles, should have a duct

with an inner cross section of at least 100 cm

2

and

should be positioned so that they are not liable to even

partial obstruction (see  gure A).

These inlets should be enlarged by 100% - with a

minimum of 200 cm

2

- whenever the surface of the

hob is not equipped with a flame failure safety device.

When the flow of air is provided in an indirect manner

from adjacent rooms (see  gure B), provided that these

are not communal parts of a building, areas with

increased fire hazards or bedrooms, the inlets should

be fitted with a ventilation duct leading outside as

described above.

! After prolonged use of the appliance, it is advisable to

open a window or increase the speed of any fans used.

Disposing of combustion fumes

The disposal of combustion fumes should be

guaranteed using a hood connected to a safe and

efficient natural suction chimney, or using an electric

fan that begins to operate automatically every time the

appliance is switched on (see  gure).

! The liquefied petroleum gases are heavier than air

and collect by the floor, therefore all rooms containing

LPG cylinders must have openings leading outside so

that any leaked gas can escape easily.

LPG cylinders, therefore, whether partially or

completely full, must not be installed or stored in rooms

or storage areas that are below ground level (cellars,

etc.). Only the cylinder being used should be stored

in the room; this should also be kept well away from

sources of heat (ovens, chimneys, stoves) that may

cause the temperature of the cylinder to rise above

50°C.

Positioning and levelling

! It is possible to install the appliance alongside

cupboards whose height does not exceed that of the

hob surface.

! Make sure that the wall in contact with the back of

the appliance is made from a non-flammable, heat-

resistant material (T 90°C).

To install the appliance correctly:

• Place it in the kitchen, dining room or the bed-sit (not

in the bathroom).

• If the top of the hob is higher than the cupboards,

the appliance must be installed at least 200 mm away

from them.

• If the cooker is installed underneath a wall cabinet,

there must be a minimum distance of 420 mm

between this cabinet and the top of the hob.

Installation

Adjacent room Room requiring

ventilation

A

B

Ventilation opening for

comburent air

Increase in the gap

between the door and

the flooring

A

Fumes channelled

straight outside

Fumes channelled through a

chimney or a branched flue

system (reserved for cooking

appliances)

GB

8

• If the cooker is

installed underneath a

wall cabinet, there must

be a minimum distance

of 420 mm between this

cabinet and the top of

the hob.

This distance should be

increased to 700 mm

if the wall cabinets are

flammable (see  gure).

• Do not position blinds behind the cooker or less than

200 mm away from its sides.

• Any hoods must be installed according to the

instructions listed in the relevant operating manual.

Levelling

If it is necessary to level the

appliance, screw the adjustable

feet into the places provided on

each corner of the base of the

cooker (see  gure).

The legs* fit into the slots on the

underside of the base of the

cooker.

Electrical connection

Install a standardised plug corresponding to the load

indicated on the appliance data plate (see Technical

data table).

The appliance must be directly connected to the

mains using an omnipolar circuit-breaker with a

minimum contact opening of 3 mm installed between

the appliance and the mains. The circuit-breaker must

be suitable for the charge indicated and must comply

with NFC 15-100 regulations (the earthing wire must

not be interrupted by the circuit-breaker). The supply

cable must be positioned so that it does not come into

contact with temperatures higher than 50°C at any

point.

Before connecting the appliance to the power supply,

make sure that:

• The appliance is earthed and the plug is compliant with

the law.

• The socket can withstand the maximum power of the

appliance, which is indicated by the data plate.

HOOD

420

Min.

min.

650

mm. with hood

min.

700

mm. without hood

mm.

600

Min. mm.

420

Min. mm.

• The voltage is in the range between the values

indicated on the data plate.

• The socket is compatible with the plug of the

appliance. If the socket is incompatible with the

plug, ask an authorised technician to replace it. Do

not use extension cords or multiple sockets.

! Once the appliance has been installed, the power

supply cable and the electrical socket must be easily

accessible.

! The cable must not be bent or compressed.

! The cable must be checked regularly and replaced

by authorised technicians only.

! The manufacturer declines any liability should

these safety measures not be observed.

Gas connection

Connection to the gas network or to the gas cylinder

may be carried out using a flexible rubber or steel hose,

in accordance with current national legislation and after

making sure that the appliance is suited to the type of

gas with which it will be supplied (see the rating sticker

on the cover: if this is not the case see below). When

using liquid gas from a cylinder, install a pressure

regulator which complies with current national

regulations. To make connection easier, the gas

supply may be turned sideways*: reverse the position

of the hose holder with that of the cap and replace the

gasket that is supplied with the appliance.

! Check that the pressure of the gas supply is

consistent with the values indicated in the Table

of burner and nozzle specifications (see below).

This will ensure the safe operation and durability of

your appliance while maintaining efficient energy

consumption.

Gas connection using a flexible rubber hose

Make sure that the hose complies with current national

legislation. The internal diameter of the hose must

measure: 8 mm for liquid gas supply; 13 mm for

methane gas supply.

Once the connection has been performed, make sure

that the hose:

• Does not come into contact with any parts that

reach temperatures of over 50°C.

• Is not subject to any pulling or twisting forces and

that it is not kinked or bent.

• Does not come into contact with blades, sharp

corners or moving parts and that it is not

compressed.

9

GB

• Is easy to inspect along its whole length so that its

condition may be checked.

• Is shorter than 1500 mm.

• Fits firmly into place at both ends, where it will

be fixed using clamps that comply with current

regulations.

! If one or more of these conditions is not fulfilled

or if the cooker must be installed according to the

conditions listed for class 2 - subclass 1 appliances

(installed between two cupboards), the flexible steel

hose must be used instead (see below).

Connecting a flexible jointless stainless steel pipe

to a threaded attachment

Make sure that the hose and gaskets comply with

current national legislation.

To begin using the hose, remove the hose holder on

the appliance (the gas supply inlet on the appliance is

a cylindrical threaded 1/2 gas male attachment).

! Perform the connection in such a way that the hose

length does not exceed a maximum of 2 metres,

making sure that the hose is not compressed and does

not come into contact with moving parts.

Checking the tightness of the connection

When the installation process is complete, check the

hose fittings for leaks using a soapy solution. Never

use a flame.

Adapting to different types of gas

It is possible to adapt the appliance to a type of gas

other than the default type (this is indicated on the

rating label on the cover).

Adapting the hob

Replacing the nozzles for the hob burners:

1. Remove the hob grids and slide the burners off their

seats.

2. Unscrew the nozzles using

a 7 mm socket spanner (see

 gure), and replace them with

nozzles suited to the new type

of gas (see Burner and nozzle

speci cations table).

3. Replace all the components

by following the above

instructions in reverse.

Adjusting the hob burners’ minimum setting:

1. Turn the tap to the minimum position.

2. Remove the knob and adjust the regulatory screw,

which is positioned inside or next to the tap pin, until

the flame is small but steady.

! If the appliance is connected to a liquid gas supply,

the regulatory screw must be fastened as tightly as

possible.

3. While the burner is alight, quickly change the

position of the knob from minimum to maximum and

vice versa several times, checking that the flame is not

extinguished.

! The hob burners do not require primary air

adjustment.

! After adjusting the appliance so it may be used with

a different type of gas, replace the old rating label with

a new one that corresponds to the new type of gas

(these labels are available from Authorised Technical

Assistance Centres).

! Should the gas pressure used be different (or vary

slightly) from the recommended pressure, a suitable

pressure regulator must be fitted to the inlet hose in

accordance with current national regulations relating to

“regulators for channelled gas”.

Safety Chain

! In order

to prevent

accidental

tipping of the

appliance, for

example by

a child clim-

bing onto the

oven door, the

supplied safety

chain MUST be

installed!

The cooker is fitted with a safety chain to be fixed by

means of a screw (not supplied with the cooker) to

the wall behind the appliance, at the same height as

the chain is attached to the appliance.

GB

10

Choose the screw and the screw anchor according

to the type of material of the wall behind the applian-

ce. If the head of the screw has a diameter smaller

than 9mm, a washer should be used. Concrete wall

requires the screw of at least 8mm of diameter, and

60mm of length.

Ensure that the chain is fixed to the rear wall of the

cooker and to the wall, as shown in figure, so that

after installation it is tensioned and parallel to the

ground level.

Replacing the Triple ring burner nozzles

1. Remove the pan supports and lift the burners out

of their housing. The burner consists of two

separate parts (see pictures).

2. Unscrew the nozzles using a 7 mm socket

spanner. Replace the nozzles with models that are

configured for use with the new type of gas (see

Table 1). The two nozzles have the same hole

diameter.

3. Replace all the components by completing the

above operations in reverse order.

• Adjusting the burners’ primary air :

Does not require adjusting.

• Setting the burners to minimum:

1. Turn the tap to the low flame position.

2. Remove the knob and adjust the adjustment

screw, which is positioned in or next to the tap pin,

until the flame is small but steady.

setting, while the burner is alight, quickly change

the position of the knob from minimum to

maximum and vice versa several times, checking

that the flame does not go out.

(thermocouple) fitted. If the device fails to work

when the burners are set to the low flame setting,

increase this low flame setting using the adjusting

screw.

seals on the by-passes using sealing wax

! Should the gas pressure used be different (or vary

slightly) from the recommended pressure, a suitable

pressure regulator must be fitted to the inlet pipe (in

order to comply with current national regulations).

5. Once the adjustment has been made, replace the

! If the appliance is connected to liquid gas, the

regulation screw must be fastened as tightly as

possible.

! Once this procedure is finished, replace the old

rating sticker with one indicating the new type of gas

used. Stickers are available from any of our Service

Centres.

Choose the screw and the screw anchor according

to the type of material of the wall behind the applian-

ce. If the head of the screw has a diameter smaller

than 9mm, a washer should be used. Concrete wall

requires the screw of at least 8mm of diameter, and

60mm of length.

Ensure that the chain is fixed to the rear wall of the

cooker and to the wall, as shown in figure, so that

after installation it is tensioned and parallel to the

ground level.

*

Only available in certain models.

*

GB

11

S

R

A

TABLE OF CHARACTERISTSICS

Dimensions

Volume

(with drawn guide rails)

Dimensions of the

lower compartment

width 42 cm

height 23 cm

depth 44 cm

Burners

may be adapted for use with any type

of gas shown on the data plate, which

is located inside the flap or, after the

oven compartment has been opened,

on the left-hand wall inside the oven.

Voltage and

frequency

see data plate

ENERGY LABEL

Directive 2002/40/EC on the label of

electric ovens.

Standard EN 50304

Energy consumption for Natural

convection – heating mode:

Convection;

Declared energy consumption for

Forced convection Class – heating

mode: Baking

This appliance conforms to the

following European Economic

Community directives: 2006/95/EC

dated 12/12/06 (Low Voltage) and

subsequent amendments -

2004/108/EC dated 15/12/04

(Electromagnetic Compatibility) and

subsequent amendments - 93/68/EEC

dated 22/07/93 and subsequent

amendments.

2002/96/EC

2009/142 of 30/11/09 (Gas)

1275/2008 (Stand-by/ Off mode)

Data plate, is located inside the flap or, after the oven

compartment has been opened, on the left-hand wall

inside the oven.

Table of burner and nozzle specifications

Table 1 G30 (GPB-B) G20 (GZ50) G2.350 (GZ35)

Burner Diameter

(mm)

Thermal

power

kW

(p.c.s.*)

Thermal

power

kW

(p.c.s.*)

By-pass

1/100

Nozzle

1/100

Flow*

g/h

Thermal

power

kW

(p.c.s.*)

Nozzle

1/100

Flow*

l/h

Thermal

power

kW

(p.c.s.*)

Nozzle

1/100

Flow*

l/h

Reduc. Nominal (mm) (mm) Nominal (mm) Nominal (mm)

Fast (Large)(R) 100 0,70 3,40 41 87 247 3,00 128 286 3,00 158 397

Semi Fast

(Medium) (S)

75 0,40 2,20 30 70 160 1,90 104 181 1,9 143 X 251

Auxiliary (Small)

(A)

51 0,40 1,30 30 52 95 1,00 76 95 1,00 106 132

Supply

Pressures

Minimum (mbar)

Nominal (mbar)

Maximum (mbar)

29

37

44

16

20

25

10

13

16

( )

Tripple

Crown (TC)

130 3.25 1.5 63

2x65

G2.350 (GZ35) p.c.s. 27.20 MJ/m

* A 15°C e 1013 mbar-dry gas

G20 (GZ50) p.c.s. 37,78 MJ/m

G30 (GPB-B) p.c.s. 49,47 MJ/Kg

262 3,25

2x99 309

S

A

TC

I5TMH6AG U

I5GMH6AG.1 U

I5GMH6AG U

I5TMH5AG.1 U

I5GMH2AG U

60l

I5GMH5AG U

I5GMHA U

I5GMH1A U

I5GMH5AG U

I5GMH6AG U

57l

I5TMH6AG U

I5GMH6AG.1 U

I5GMH6AG U

I5TMH5AG.1 U

I5GMH2AG U

I5GMH5AG U

I5GMHA U

I5GMH1A U

I5GMH5AG U

I5GMH6AG U

340

410

424

391

340

424

width

height

depth

mm

width

height

depth

12

GB

Start-up and use

Using the hob

Lighting the burners

For each BURNER knob there is a full ring showing the

strength of the flame for the relevant burner.

To light one of the burners on the hob:

1. Bring a flame or gas lighter close to the burner.

2. Press the BURNER knob and turn it in an

anticlockwise direction so that it is pointing to the

maximum flame setting .

3. Adjust the intensity of the flame to the desired level

by turning the BURNER knob in an anticlockwise

direction. This may be the minimum setting , the

maximum setting  or any position in between the two.

If the appliance is fitted with an electronic lighting

device* (C), press the

BURNER knob and turn it in

an anticlockwise direction,

towards the minimum flame

setting, until the burner

is lit. The burner may be

extinguished when the knob

is released. If this occurs,

repeat the operation, holding the knob down for a longer

period of time.

f the appliance is equipped with a flame failure safety

device (X), press and hold the BURNER knob for

approximately 3-7 seconds to keep the flame alight

and to activate the device.

! If the flame is accidentally extinguished, switch off the

burner and wait for at least 1 minute before attempting

to relight it.

To switch the burner off, turn the knob until it reaches

the stop position •.

Practical advice on using the burners

For the burners to work in the most efficient way

possible and to save on the amount of gas consumed,

it is recommended that only pans that have a lid and

a flat base are used. They should also be suited to the

size of the burner:

To identify the type of burner, please refer to the

diagrams contained in the “Burner and nozzle

specifications”.

Using the oven

! The first time you use your appliance, heat the empty

oven with its door closed at its maximum temperature

for at least half an hour. Ensure that the room is well

ventilated before switching the oven off and opening

the oven door. The appliance may emit a slightly

unpleasant odour caused by protective substances

used during the manufacturing process burning away.

! Before operating the product, remove all plastic film

from the sides of the appliance.

! Never put objects directly on the bottom of the oven;

this will avoid the enamel coating being damaged.

! Should the appliance be equipped with an electronic

programmer*, to use the electric oven, just press

buttons

and at the same time (the symbol

will appear on the display) before selecting the desired

cooking function.

1. Select the desired cooking mode by turning the

SELECTOR knob.

2. Select the recommended temperature for the

cooking mode or the desired temperature by turning

the THERMOSTAT knob.

A list detailing cooking modes and suggested cooking

temperatures can be found in the relevant table (see

Oven cooking advice table).

During cooking it is always possible to:

• Change the cooking mode by turning the

SELECTOR knob.

• Change the temperature by turning the

THERMOSTAT knob.

*

Only available in certain models.

X

C

Burner ř Cookware diameter (cm)

Fast (R) 24 - 26

Semi Fast (S) 16 - 20

Auxiliary (A) 10 - 14

(TC)

GB

13

results are achieved when preparing veal or beef-

based dishes as well (braised meats, stew, goulash,

wild game, ham etc.) which need to cook slowly and

require basting or the addition of liquid. It nonetheless

remains the best system for baking cakes as well as

fruit and cooking using covered casserole dishes

for oven baking. When cooking in convection mode,

only use one dripping pan or cooking rack at a time,

otherwise the heat distribution will be uneven. Using

the different rack heights available, you can balance

the amount of heat between the top and the bottom of

the oven. Select from among the various rack heights

based on whether the dish needs more or less heat

from the top.

FAN ASSISTED mode

Temperature: any temperature between 50°C and Max.

The heating elements, as well as the fan, will come

on. Since the heat remains constant and uniform

throughout the oven, the air cooks and browns food

uniformly over its entire surface. With this mode, you

can also cook various dishes at the same time, as

long as their respective cooking temperatures are the

same. A maximum of 2 racks can be used at the same

time, following the instructions in the section entitled:

“Cooking On More Than One Rack”.

This fan assisted mode is particularly recommended

for dishes requiring a gratin finish or for those

requiring considerably prolonged cooking times,

such as for example: lasagne, pasta bakes, roast

chicken and potatoes, etc… Moreover, the excellent

heat distribution makes it possible to use lower

temperatures when cooking roasts. This results in

less loss of juices, meat which is more tender and a

decrease in the loss of weight for the roast. The fan

assisted mode is especially suited for cooking fish,

which can be prepared with the addition of a limited

amount of condiments, thus maintaining their flavour

and appearance.

Desserts: the fan assisted mode is also perfect for

baking leavened cakes.

Moreover, this mode can also be used to thaw quickly

white or red meat and bread by setting the temperature

to 80 °C. To thaw more delicate foods, set the

thermostat to 60°C or use only the cold air circulation

feature by setting the thermostat to 0°C.

• Stop cooking by turning the SELECTOR knob to the

“0” position.

! Always place cookware on the rack(s) provided.

THERMOSTAT indicator light

When this is illuminated, the oven is generating heat.

It switches off when the inside of the oven reaches

the selected temperature. At this point the light

illuminates and switches off alternately, indicating

that the thermostat is working and is maintaining the

temperature at a constant level.

Oven light

This is switched on by turning the SELECTOR knob to

any position other than “0”. It remains lit as long as the

oven is operating. By selecting



with the knob, the

light is switched on without any of the heating elements

being activated.

Timer*

To activate the Timer proceed as follows:

1. Turn the TIMER knob in a clockwise direction  for

almost one complete revolution to set the buzzer.

2. Turn the TIMER knob in an anticlockwise direction



to set the desired length of time.

Cooking modes

BAKING mode

Temperature: any temperature between 50°C and Max.

The rear heating element and the fan come on,

guaranteeing delicate heat distributed uniformly

throughout the oven.

This mode is ideal for baking and cooking delicate

foods - especially cakes that need to rise - and for the

preparation of certain tartlets on 3 shelves at the same

time. Here are a few examples: cream puffs, sweet and

savoury biscuits, savoury puffs, Swiss rolls and small

portions of vegetables au gratin, etc…..

CONVECTION mode

Temperature: any temperature between 50°C and Max.

On this setting, the top and bottom heating elements

come on. This is the classic, traditional type of oven

which has been perfected, with exceptional heat

distribution and reduced energy consumption. The

convection oven is still unequalled when it comes to

cooking dishes made up of several ingredients, e.g.

cabbage with ribs, Spanish style cod, Ancona style

stockfish, tender veal strips with rice, etc. Excellent

PIZZA

modemode

mode

The circular heating elements and the elements at the

bottom of the oven are switched on and the fan is

activated. This combination heats the oven rapidly by

OO

O

VEN VEN

VEN

TT

T

OPOP

OP

mode

The central part of the top heating element is switched

on. The high and direct temperature of the grill is

recommended for food that requires a high surface

temperature (veal and beef steaks, fillet steak and

entrecôte). This cooking mode uses a limited amount

of energy and is ideal for grilling small dishes. Place

the food in the centre of the rack, as it will not be cooked

properly if it is placed in the corners.

*

Only available in certain models.

14

GB

DOUBLE GRILL mode

The top heating element and the rotisserie spit will be

activated.

This provides a larger grill than the normal grill setting

and has an innovative design that improves cooking

efficiency by 50% and eliminates the cooler corner

areas. Use this grilling mode to achieve a uniform

browning on top of the food.

F FAN

ASSISTED DOUBLE GRILL mode

The top heating element and the turnspit are activated

and the fan begins to operate. This combination of

features increases the effectiveness of the unidirectional

thermal radiation of the heating elements through forced

circulation of the air throughout the oven. This prevents

the food from burning on top by enabling heat to penetrate

into the food more effectively; it is therefore an ideal

way of cooking food quickly under the grill or for grilling

large pieces of meat without having to use the turnspit.

! The GRILL, DOUBLE GRILL and FAN-ASSISTED

DOUBLE GRILL cooking modes must be performed with

the oven door shut.

! When using the GRILL and DOUBLE GRILL cooking

modes, place the rack in position 5 and the dripping

pan in position 1 to collect cooking residues (fat and/or

grease). When using the FAN-ASSISTED DOUBLE

GRILL cooking mode, place the rack in position 2 or 3

and the dripping pan in position 1 to collect cooking

residues.

DEFROSTING mode

The fan located on the bottom of the oven makes the

air

circulate at room temperature around the food. This is

recommended for the defrosting of all types of food, but

in

particular for delicate types of food which do not require

heat, such as for example: ice cream cakes, cream or

custard desserts, fruit cakes. By using the fan, the

defrosting time is approximately halved. In the case

of

meat, fish and bread, it is possible to accelerate the

process using the “multi-cooking” mode and setting

the temperature to 80° - 100°C.

BOTTOM VENTILATED mode

The bottom heating element and the fan is activated,

which allows for the heat distribution within the whole

cavity of the oven. This combination is useful for light

cooking of vegetables and fish.

BOTTOM mode BOTTOM mode

The lower heating element is activated. This position

is recommended for perfecting the cooking of dishes

(in baking trays) which are already cooked on the

surface but require further cooking in the centre, or

for desserts with a covering of fruit or jam, which only

require moderate colouring on the surface. It should

be noted that this function does not allow the

maximum

temperature to be reached inside the oven (250°C)

and it is therefore not recommended that foods are

cooked using only this setting, unless you are baking

cakes (which should be baked at a temperature of

180°C or lower).

Practical cooking advice

Cooking on several shelves simultaneously

If it is necessary to use two racks, use the FAN

ASSITED mode , as this is the only cooking mode

suited to this type of cooking. We also recommend

that:

• Positions 1 and 5 are not used. This is because

excessive direct heat can burn temperature

sensitive foods.

• Positions 2 and 4 are used and that food that

requires more heat is placed on the rack in position

2.

• When cooking foods that require different cooking

times and temperatures, set a temperature

that is halfway between the two recommended

temperatures (see Oven cooking advice table) and

place the more delicate food on the rack in position

4. Remove the food that requires a shorter cooking

time first.

• When cooking pizzas on several racks with the

temperature set to 220°C, the oven is preheated for

15 minutes. Generally speaking, cooking on the rack

in position 4 takes longer: we recommend that the

pizza cooked on the lowest rack position is removed

first, followed by the pizza cooked in position 4 a few

minutes later.

• Place the dripping pan on the bottom and the rack

on top.

producing a considerable amount of heat, particularly

from the element at the bottom. If you use more than

one rack at a time, switch the position of the dishes

halfway through the cooking process.

**

*

Only available in certain models.

Lower oven compartment*

There is a compartment underneath the oven that may

be used to storeoven accessories or deep dishes. To

open the door pull it downwards (see  gure).

! Do not place

flammable materials

in the lower oven

compartment.

! The internal surfaces of

the compartment (where

present) may become

hot.

WARNING! The oven is

provided with a stop sys-

tem to extract the racks

and prevent them from

coming out of the oven.(1)

As shown in the drawing,

to extract them comple-

tely, simply lift the racks,

holding them on the front

part, and pull (2).

Rotisserie

To operate the

rotisserie (see diagram)

proceed as follows:

1. Place the dripping

pan in position 1.

2. Place the rotisserie

support in position 4

and insert the spit in

the hole provided on

the back panel of the

oven.

3. Activate the rotisserie by selecting

with the

SELECTOR knob.

*

Only available in certain models.

15

GB

16

*

Only available in certain models.

Timer feature

This function may be accessed by pressing the 

button, after which the display will show the symbol

. Every time the + button is pressed it corresponds

to a time increase of 10 seconds, until it reaches 99

minutes and 50 seconds. After this point, each press of

the button represents an increase of one minute, up to a

maximum of 10 hours.

Pressing the - button reduces the time.

After the time period has been set, the timer will begin

to count down. When the timer reaches zero, the

buzzer will sound (this may be stopped by pressing

any button).

The time may be displayed by pressing the



button,

and the  symbol indicates that the timer function has

been set. After approximately 7 seconds, the display will

automatically revert to the timer.

Cancelling a time that has already been set

Press the - button until the display shows 0:00.

Adjusting the buzzer volume

After selecting and confirming the clock settings, use

the - button to adjust the volume of the alarm buzzer.

Planning cooking with the electronic

programmer*

Setting the clock

After the appliance has been connected to the

power supply, or after a blackout, the display will

automatically reset to 0:00 and begin to blink. To set

the time:

1. Press the COOKING TIME button

and the

COOKING END TIME simultaneously.

2. Within 4 seconds of having pressed these buttons,

set the exact time by pressing the + and - buttons.

The + button advances the hours and the



- button

decreases the hours.

Once the time has been set, the programmer

automatically switches to manual mode.

Setting the timer

The timer enables a countdown to be set, when the

time has elapsed a buzzer sounds.

To set the timer proceed as follows:

1. press the TIMER button

. The display shows:

.

2. Press the + and - buttons to set the desired time.

3. When the buttons are released the timer begins

Electronic timer*

This function displays the time and works as a timer

which counts down to zero.

! All functions will be implemented approximately 7

seconds after they have been set.

Resetting the clock

After the appliance has been connected to the power

supply, or after a power cut, the clock display will

begin to blink, showing the figure: 0:00

• Press button



and then buttons

-

and

+

to set the

exact time. Press and hold the buttons to quicken

the count upwards.

Any necessary modifications can be made by

repeating the above process.

counting down and the current time appears on the

display.



4. After the time has elapsed a buzzer will sound, and

this can be switched off by pressing any button (except

the + and - buttons). The symbol

will switch off.

! The timer does not switch the oven on or off.

Adjusting the volume of the buzzer

After selecting and confirming the clock settings, use

the - button to adjust the volume of the alarm buzzer.

Setting the cooking time with a delayed start

First decide which cooking mode you wish to use and

set a suitable temperature using the SELECTOR and

THERMOSTAT knobs on the oven.

At this point it is possible to set the cooking time:

1. Press the COOKING TIME button

.

2. Within 4 seconds of having pressed this button, set

the desired amount of time by pressing the + and -

buttons. If, for example, you wish to set a cooking time

of 30 minutes, the display will show:



17

GB

3. 4 seconds after the buttons are released, the current

time (for example 10.00) reappears on the display with

the symbol



and the letter A (AUTO).

Next the desired cooking end time must be set:

4. Press the END COOKING TIME button

.

5. Within 4 seconds of having pressed this button,

adjust the cooking end time by pressing the + and -

buttons. If, for example, you want cooking to end at

13.00, the display shows:



6. 4 seconds after the buttons are released, the current

time (for example 10.00) reappears on the display with

the letter A (AUTO).



At this point, the oven is programmed to switch on

automatically at 12:30 and switch off after 30 minutes,

at 13.00.

Setting the cooking time with an immediate start

Follow the above procedure for setting the cooking

time (points 1-3).

! When the letter A appears, this indicates that both

the cooking time and the end cooking time have been

programmed in AUTO mode. To restore the oven to

manual operation, after each AUTO cooking mode

press the COOKING TIME

and END COOKING

TIME buttons simultaneously.

! The symbol



will remain lit, along with the oven, for

the entire duration of the cooking programme.

The set cooking duration can be displayed at any time

by pressing the COOKING TIME button

, and the

cooking end time may be displayed by pressing the

END COOKING TIME button . When the cooking

time has elapsed a buzzer sounds. To stop it, press

any button apart from the + and - buttons.

Cancelling a previously set cooking programme

Press the COOKING TIME button

and the

COOKING END TIME simultaneously.

Correcting or cancelling previously set data

The data entered can be changed at any time by

pressing the corresponding button (TIMER, COOKING

TIME or COOKING END TIME) and the + or - button.

When the cooking time data is cancelled, the cooking

end time data is also cancelled automatically, and vice

versa.

If the oven has already been programmed, it will not

accept cooking end times which are before the start of

the programmed cooking process.

End-cooking Timer *

1. To set the buzzer, turn the COOKING TIMER knob

clockwise almost one complete revolution.

2. Turn the knob anticlockwise to set the desired time:

align the minutes shown on the COOKING TIMER knob

with the indicator on the control panel.

3. When the selected time has elapsed, a buzzer

sounds and the oven turns off.

4. When the oven is off the cooking timer can be used

as a normal timer.

! To use the oven manually, in other words when you

do not wish to use the end of cooking timer, turn the

COOKING TIMER knob until it reaches the  symbol.

*

Only available in certain models.

GB

17

Oven cooking advice table

Selector knob

setting

Food to be cooked Weight

(in kg)

Cooking rack

position from

bottom

Preheating time

(minutes)

Thermostat

knob

setting

Cooking

time

(minutes)

Baking

Tarts

Fruit cakes

Plum cake

Sponge cake

Stuffed pancakes (on 2

racks)

Small cakes (on 2 racks)

Cheese puffs (on 2

racks)

Cream puffs (on 3 racks)

Biscuits (on 3 racks)

Meringues (on 3 racks)

0.5

1

0.7

0.5

1.2

0.6

0.4

0.7

0.5

3

2/3

3

2-4

1-3-5

15

180

160

200

190

210

180

90

20-30

40-45

40-50

25-30

30-35

20-25

15-20

20-25

180

Convection

Duck

Roast veal or beef

Pork roast

Biscuits (short pastry)

Tarts

1

-

1

3

15

200

180

65-75

70-75

70-80

15-20

30-35

Fan assisted

Pizza (on 2 racks)

Lasagne

Lamb

Roast chicken +

potatoes Mackerel

Plum-cake

Cream puffs (on 2 racks)

Biscuits (on 2 racks)

Sponge cake (on 1 rack)

Sponge cake (on 2

racks)

Savoury pies

1

0.5

1.0

1.5

2-4

3

2

2-4

2

2-4

2

2-4

3

15

10

15

220

200

180

170

190

180

170

200

15-20

30-35

50-60

60-75

30-35

40-50

20-25

10-15

15-20

20-25

25-30

Top Oven

Browning food to perfect

cooking

- 3/4 15 220 -

Grill

Soles and cuttlefish

Squid and prawn

kebabs

Cod filet

Grilled vegetables

Veal steak

Cutlets

Hamburgers

Mackerels

Toasted sandwiches

1

n.° 4

4

3/4

4

5

Max

8-10

6-8

10

10-15

15-20

7-10

15-20

2-3

Fan assisted

grill

Grilled chicken

Cuttlefish

1.5

3

5

200

55-60

30-35

!

cooking times are approximate and may vary according to personal taste. When cooking using the grill or fan

assisted grill, the dripping pan must always be placed on the 1st oven rack from the bottom.

Bottom

Ventilated

Bream

Cod sh  llet

Sea bass in foil

Mixed vegetables

(Ratatouille type)

Well-done vegetables

0.5

0.8 – 1,0

1,5 – 2,0

3

18

16

24

21

20

170-180

160-170

200-210

190 -200

180 - 190

25-35

15-20

35-45

50 - 60

55 - 60

Bottom Mode

For perfectioning cooking

19

GB

Precautions and tips

! This appliance has been designed and manufactured

in compliance with international safety standards.

The following warnings are provided for safety reasons

and must be read carefully.

General safety

• The appliance was designed for domestic use inside

the home and is not intended for commercial or

industrial use.

• The appliance must not be installed outdoors, even in

covered areas. It is extremely dangerous to leave the

appliance exposed to rain and storms.

• Do not touch the appliance with bare feet or with wet

or damp hands and feet.

• The appliance must be used by adults only for

the preparation of food, in accordance with the

instructions provided in this booklet.

• The instruction booklet accompanies a class 1

(insulated) or class 2 - subclass 1 (recessed

between 2 cupboards) appliance.

• Keep children away from the oven.

• Make sure that the power supply cables of other

electrical appliances do not come into contact with

the hot parts of the oven.

• The openings used for the ventilation and dispersion

of heat must never be covered.

• Always use oven gloves when placing cookware in

the oven or when removing it.

• Do not use flammable liquids (alcohol, petrol, etc...)

near the appliance while it is in use.

• Do not place flammable material in the lower storage

compartment or in the oven itself. If the appliance is

switched on accidentally, it could catch fire.

• Always make sure the knobs are in the “

•

” position

when the appliance is not in use.

• When unplugging the appliance, always pull the plug

from the mains socket; do not pull on the cable.

• Never perform any cleaning or maintenance work

without having disconnected the appliance from the

electricity mains.

• If the appliance breaks down, under no

circumstances should you attempt to repair

the appliance yourself. Repairs carried out by

inexperienced persons may cause injury or further

malfunctioning of the appliance. Contact Assistance.

• Do not rest heavy objects on the open oven door.

•

The appliance should not be operated by people

(including children) with reduced physical, sensory

or mental capacities, by inexperienced individuals

or by anyone who is not familiar with the product.

These individuals should, at the very least, be

supervised by someone who assumes responsibility

for their safety or receive preliminary instructions

relating to the operation of the appliance.

WARNING! The glass lid can break in

if it is heated up. Turn off all the burn-

ers and the electric plates before clos-

ing the lid

.

Disposal

• When disposing of packaging material: observe

local legislation so that the packaging may be

reused.

• The European Directive 2002/96/EC relating

to Waste Electrical and Electronic Equipment

(WEEE) states that household appliances should

not be disposed of using the normal solid urban

waste cycle. Exhausted appliances should be

collected separately in order to optimise the cost

of re-using and recycling the materials inside the

machine, while preventing potential damage to the

atmosphere and to public health. The crossed-out

dustbin is marked on all products to remind the

owner of their obligations regarding separated

waste collection. For more information relating to the

correct disposal of household appliances, owners

should contact their local authorities or appliance

dealer.

Respecting and conserving the

environment

• You can help to reduce the peak load of the

electricity supply network companies by using the

oven in the hours between late afternoon and the

early hours of the morning.

• Always keep the oven door closed when using the

GRILL and FAN-ASSISTED GRILL mode cooking.

This will achieve better results while saving energy

(approximately 10%).

• Check the door seals regularly and wipe them clean

to ensure they are free of debris so that they adhere

properly to the door, thus avoiding heat dispersion.

If the cooker is placed on a pedestal, take the neces-

sary precautions to prevent the cooker from sliding

off the pedestal itself.

•

GB

20

Switching the appliance off

Disconnect your appliance from the electricity supply

before carrying out any work on it.

Cleaning the appliance

! Never use steam cleaners or pressure cleaners on

the appliance.

• The stainless steel or enamel-coated external parts

and the rubber seals may be cleaned using a

sponge that has been soaked in lukewarm water

and neutral soap. Use specialised products for the

removal of stubborn stains. After cleaning, rinse well

and dry thoroughly. Do not use abrasive powders or

corrosive substances.

• The hob grids, burner caps, flame spreader rings

and burners may be removed to make cleaning

easier; wash them in hot water and non-abrasive

detergent, making sure all burnt-on residue is

removed before drying them thoroughly.

• For hobs with electronic ignition, the terminal part of

the electronic lighting devices should be cleaned

frequently and the gas outlet holes should be

checked for blockages.

• The inside of the oven should ideally be cleaned

after each use, while it is still lukewarm. Use hot

water and detergent, then rinse well and dry with a

soft cloth. Do not use abrasive products.

•

Clean the glass part of the oven door using a

sponge and a non-abrasive cleaning product, then

dry thoroughly with a soft cloth. Do not use rough

abrasive material or sharp metal scrapers as these

could scratch the surface and cause the glass to

crack.

• The accessories can be washed like everyday

crockery, and are even dishwasher safe.

The cover*

If the cooker is fitted with

a glass cover, this cover

should be cleaned using

lukewarm water. Do not

use abrasive products.

It is possible to remove

the cover in order to make

cleaning the area behind

the hob easier. Open

the cover fully and pull it

upwards (see  gure).

! Do not close the cover when the burners are alight or

when they are still hot.

! Remove any liquid from the lid before opening it.

Inspecting the oven seals

Check the door seals around the oven regularly. If

the seals are damaged, please contact your nearest

Authorised After-sales Service Centre. We recommend

that the oven is not used until the seals have been

replaced.

Replacing the oven light bulb

1. After disconnecting the oven from the electricity

mains, remove the glass lid

covering the lamp socket (see

 gure).

2. Remove the light bulb and

replace it with a similar one: voltage

230 V, wattage 25 W, cap E 14.

3. Replace the lid and reconnect

the oven to the electricity supply.

Gas tap maintenance

Over time, the taps may become jammed or difficult to

turn. If this occurs, the tap must be replaced.

! This procedure must be performed by a qualified

technician who has been authorised by the

manufacturer.

Assistance

Please have the following information to hand:

• The appliance model (Mod.).

• The serial number (S/N).

This information can be found on the data plate located

on the appliance and/or on the packaging.

Care and maintenance

*

Only available in certain models.

! Do not use the oven lamp as/for ambient lighting.

Strona się ładuje...

Whirlpool I5GMH6AG(X) U instrukcja

Whirlpool I5GMH6AG(X) U instrukcja

w innych językach

Powiązane artykuły

Inne dokumenty