Airwell Comfort series Installation Instructions Manual

INSTALLATION INSTRUCTION

NOTE: This manual is for the single split application.

For multi split applications please use installation manual supplied

within outdoor unit package.

DC Inverter Split system for Wall / ceiling mounting

The appliance shall not be installed in the laundry.

DC INVERTER

R410A

ENGLISH

GENERAL RECOMMENDATIONS

- Congratulations for having selected an our air conditioner.

SAFETY DIRECTIONS

- Follow the safety rules in force when you are working on your appliance.

- Installation and maintenance of the equipment must only be performed by qualified specialists in

accordance with the rules of good workmanship and prevailing standards and instructions.

- Make sure that the power supply and its frequency are adapted to the required electric current of

operation, taking into account specific conditions of the location and the current required for any

other appliance connected with the same circuit.

WARNING

- Cutoff power supply before starting to work on the appliance. The manufacturer declines any

responsibility and the warranty becomes void if these instructions are not respected.

- If you meet a problem, please call the Technical Department of your area.

- If possible, assemble the mandatory or optional accessories before placing the appliance on its

final Iocation.(see instruc- tions provided with each accessory)

- In order to become fully familiar with the appliance, we suggest to read also our Technical

Instructions.

- The information contained in these Instructions are subject to modification without advance notice.

IT IS MANDATORY TO CUT OFF POWER SUPPLY

BEFORE STARTING TO WORK IN THE ELECTRIC

CASING BOXES.

2

- For appliances with supplementary heaters, the minimum clearance from the appliance to

combustible is 50cm other wise, it will cause fire.

Do not attempt to install this air conditioner by yourself.

This unit contains no user-serviceable parts. Always consult authorized service personnel for repairs.

When moving, consult authorized service personnel for disconnection and installation of the unit.

Do not become excessively chilled by staying for lengthy periods in the direct cooling airflow.

Do not insert fingers or objects into the outlet port or intake grilles.

Do not start and stop air conditioner operation by disconnecting the power supply cord and so on.

Take care not to damage the power supply cord.

In the event of a malfunction (burning smell, etc.),immediately stop operation, disconnect the power supply plug, and consult authorized

service personnel.

If the power supply cord of this appliance is damaged, it should only be replaced by the authorized service personal, since special purpose

tools and specified cord are required.

Provide occasional ventilation during use.

Do not direct air flow at fireplaces or heating apparatus.

Do not climb on, or place objects on, the air conditioner.

Do not hang objects form the indoor unit.

Do not set flower vases or water containers on top of air conditioners.

Do not expose the air conditioner directly to water.

Do not pull power supply cord.

Turn off power source when not using the unit for extended periods.

Check the condition of the installation stand for damage.

Do not place animals or plants in the direct path of the air flow.

Do not drink the water drained from the air conditioner.

Do not use in applications involving the storage of foods, plants or animals, precision equipment,or art works.

Connection valves become hot during Heating; handle with care.

Do not apply any heavy pressure to radiator fins.

Operate only with air filters installed.

Do not block or cover the intake grille and outlet port.

Ensure that any electronic equipment is at least one metre away from either the indoor or outdoor units.

Avoid installing the air conditioner near a fireplace or other heating apparatus.

When installing the indoor and outdoor unit, take precautions to prevent access to infants.

Do not use inflammable gases near the air conditioner.

Danger This sign warns of death or serious injury.

Caution This sign warns of damage to property.

PRECAUTIONS

Set a suitable room temperature; excessively low room temperature is not good for your health and wastes electricity. Avoid frequent

setting of the temperature.

During cooling, avoid direct sun. Keep curtains and blinds closed. Close doors and windows to keep the cool air in the room.

Avoid generating heat or using of heating appliances while the air conditioner in cooling mode.

Make sure that the air flap is positioned properly: horizontal flow in cooling and downward vertical flow for heating.

Keep the room temperature uniform by adjusting the left/right vertical air blades.

Position the air flap and the left/right air blades in such a manner as to prevent your body from being exposed directly to air drafts.

During prolonged operation, ventilate the room occasionally by opening a window from time to time.

In a power failure, the microprocessor memory is retained. When restarted,operation will be resumed in the last mode of

operation. However, if the timer was used, the unit will be turned off by the timer only if the remote control is aimed at the

unit. Otherwise the power failure will cause the timer data to be erased from the microprocessor memory.

After turning on, allow more than 3 minutes for cooling, heating or dry operation to start.

When DRY mode is used, make sure that the room temperature is between 20 and 27 . When used out of this range,

the unit may protect itself and become inoperative.

When COOL or DRY modes are used, make sure that the room's relative humidity is below 78% lf the unit is used for a

prolonged periods of time in high humidity, moisture may form on the air outlet and drip down.

Remote control signals may not be received if the indoor unit controls cover is exposed to direct sunlight or strong light. ln

such a case, block the sunlight or dim the lighting.

The remote control is operative in a range of 8 meters. lf you are out of range, the remote control may have difficulties in

transmitting signals.

OPERATION TIPS

3

The appliance is not intended for use by young children of infirm persons without supervision.

Please pre-heat the air conditioner for at least 12 hours before operation. lf use it for a long time, please keep the power on.

ENGLISH

SUMMARY

DESCRIPTION

Installation/service tools.........................................................................................................................5

Operating temperature range................................................................................................................6

Dimensions of Indoor Unit .....................................................................................................................6

Dimensions of Outdoor Units.................................................................................................................6

INSTALLATION

Location of the Indoor Unit .................................................................................................................7-8

Location of the Outdoor Unit..................................................................................................................9

Refrigerant Line ...................................................................................................................................10

Installation.......................................................................................................................................1

Electrical Connections ....................................................................................................................

MAINTENANCE

Scheduled Maintenance .................................................................................................................

4

CAUTION

Incidentally, the "refrigerant cylinder" comes with the refrigerant designation (R410A) and protector coating in the

U.S's ARI specified rose color (ARI color code: PMS 507).

Also, the "charge port and packing for refrigerant cylinder" requires 1/2 UNF 20 threads per inch corresponding

to the charge hose's port size.

New Refrigerant Air Conditioner Installation

THIS AIR CONDTIONER ADOPTS THE NEW HFC REFRIGERANT (R410A) WHICH DOES NOT DESTROY OZONE

LAYER. R410A refrigerant is apt to be affected by impurities such as water, oxidizing membrane, and oils because the working

pressure of R410A refrigerant is approx. 1.6 times of refrigerant R22. Accompanied with the adoption of the new refrigerant, the

refrigeration machine oil has also been changed. Therefore, during installation work, be sure that water, dust, former refrigerant,

or refrigeration machine oil does not enter into the new type refrigerant R410A air conditioner circuit.

To prevent mixing of refrigerant or refrigerating machine oil, the sizes of connecting sections of charging port on main unit and

installation tools are different from those used for the conventional refrigerant units. Accordingly, special tools are required for

the new refrigerant (R410A) units. For connecting pipes, use new and clean piping materials with high pressure fittings made for

R410A only, so that water and/or dust does not enter. Moreover, do not use the existing piping because there are some

problems with pressure fittings and possible impurities in existing piping.

Changes in the product and components

In air conditioners using R410A, in order to prevent any other refrigerant from being accidentally charged, the service port

diameter size of the outdoor unit control valve (3 way valve) has been changed. (1/2 UNF 20 threads per inch)

In order to increase the pressure resisting strength of the refrigerant piping, flare processing diameter and

opposing flare nuts sizes have been changed. (for copper pipes with nominal dimensions 1/2 and 5/8)

As the working pressure is high, it is impossible to measure the

working pressure using conventional gauges. In order to prevent

any other refrigerant from being charged, the port diameters have

been changed.

In order to increase pressure resisting strength, hose materials

and port sizes have been changed (to 1/2 UNF 20 threads per

inch).

When purchasing a charge hose, be sure to confirm the port size.

As working pressure is high and gasification speed is fast, it is

difficult to read the indicated value by means of charging cylinder,

as air bubbles occur.

The size of opposing flare nuts have been increased. Incidentally,

a common wrench is used for nominal diameters 1/4 and 3/8.

By increasing the clamp bar's receiving hole size, strength of

spring in the tool has been improved.

Used when flare is made by using conventional flare tool.

Connected to conventional vacuum pump. It is necessary to use

an adapter to prevent vacuum pump oil from flowing back into

the charge hose. The charge hose connecting part has two ports

-- one for conventional refrigerant (7/16 UNF 20 threads per inch)

and one for R410A. If the vacuum pump oil (mineral) mixes with

R410A a sludge may occur and damage the equipment.

Exclusive for HFC refrigerant.

New tools for R410A Applicable to R22 model Changes

Gauge manifold

Charge hose

Electronic balance for

refrigerant charging

Torque wrench

(nominal dia. 1/2, 5/8)

Flare tool (clutch type)

Gauge for projection

adjustment

Vacuum pump adapter

Gas leakage detector

New tools for R410A

INSTALLATION/SERVICE TOOLS

5

ENGLISH

DIMENSIONS OF OUTDOOR UNITS

DIMENSIONS OF INDOOR UNIT

OPERATING TEMPERATURE RANGE

32

21

27

10

23

15

NANA

NA

46

-10

24

-15

18

-16

Indoor

Outdoor

Cooling

Heating

Upper Limit

Lower Limit

Upper Limit

Lower Limit

WB[ C]

O

DB[ C]

O

WB[ C]

O

DB[ C]

O

6

Unit: mm

Item Model A B C D E

24/30K 980 427 790 610 395



36K 1107 440 1100 631 400



48K 958 412 1349 572 376



60K 1085 427 1365 620 395



Model A B C D H

24K 1220 225 1158 280 700

30/36K 1420 245 1354 280 700

48K 1700 245 1634 280 700

7

6XFKDSODFHZKHUHLVSHUPLWWLQJHDV\FRQQHFWLRQZLWK

WKHRXWGRRUXQLW

6XFKDSODFHZKHUHLVPRUPRUHDZD\IURPRWKHUHOHFWULF

DSSOLDQFHVVXFKDVWHOHYLVLRQDXGLRGHYLFHHWF

$YRLGDORFDWLRQZKHUHWKHUHLVKHDWVRXUFHKLJKKXPLGLW\

RULQIODPPDEOHJDV

'RQRWXVHWKHXQLWLQWKHLPPHGLDWHVXUURXQGLQJVRID

ODXQGU\DEDWKDVKRZHURUDVZLPPLQJSRRO

%HVXUHWKDWWKHLQVWDOODWLRQFRQIRUPVWRWKHLQVWDOODWLRQ

GLPHQVLRQGLDJUDP

7KHVSDFHDURXQGWKHXQLWLVDGHTXDWHIRUYHQWLODWLRQ



5HPRYHWKHVLGHSDQHOIL[LQJVFUHZDQGSXOOWR

WKHIURQWGLUHFWLRQDUURZGLUHFWLRQWRUHPRYH



/RRVHQWZRKDQJHUEUDFNHWVHWWLQJEROWV0

RQHDWKVLGHIRUOHVVWKDQPP5HPRYHWZR

KDQJHUEUDFNHWIL[LQJEROWV0RQWKHUHDUVLGH

'HWDFKWKHKDQJHUEUDFNHUE\SXOOLQJit EDFNZDUG



6XFKDSODFHZKHUHLV condersation water is easily drained

out.

Such a place that can handle the weight of indoor unit.

Such a place which has easy access for maintenance.

S

SELECTION OF INSTALLATION LOCATION.

THERE ARE 2 STYLES OF INSTALLATION.

CEILING TYPE

FLOOR TYPE

Each type is similar to the other as follows;

Determine the mounting position on ceiling or wall

by using paper pattern to indicate indoor frarne.

Mark the pattern and pull out the paper pattern.

Remove the return grill,the side panel and the hanger

bracket from the indoor unit as per procedure bellow.

Press the fixing knob of the relurn grilles, the grilles

will be opened wider and then pull it out from

the indoor.

CAUTION FOR INSTALLATION WHERE

AIR CONDITIONER TROUBLE IS LIKELY

TO OCCUR.

Where there is too much of oil.

Where it is acid base area.

Where there is irregular electrical supply.

Indoor Unit Instrallation2

3(5 INSTALLATION INSTRUCTIONS



6LGHSDQHOIL[LQJVFUHZ0

INSTALLATION

PAPER PLANK

100cm

or more

30cm

or more

60cm

or more

60cm

or more

150cm

or more

ENGLISH

8

Indoor Unit Installation

,167$//$7,21,16758&7,216

6HWWKHVXVSHQVLRQEROW8VH:RU0VL]HVXVSHQVLRQEROWV

$GMXVWWKHGLVWaQFHIURPWKHXQLWWRWKHFHLOLQJVODEEHIRUHKDQG

)LJ25

40mm or less

INSTALLATION OF THE OUTDOOR UNIT

- Minimum clearance to respect (in mm).

minimum

9

ENGLISH

- The indoor unit may be installed above or below the unit

- The flare couplings are available as accessories in standard lengths of 2.5, 5 and 8m.

- The pipes are delivered coiled and equipped with flare nuts.

- Carefully uncoil the pipes in the opposite direction from the tums so as not to flatten them.

REFRIGERANT CONNECTIONS

10

DRAINING CONDENSATES

CAUTION

If the heat pump outdoor unit is installed in an area where the outdoor

temperature may fall below o + 1 C, it is mandatory to provide a system

preventing any risk of freezing of the condensate (e.g.heating wire).

NOM. CAPACITY

(kBtu/h)

024/030/036 3/8”-5/8” 30 15 5 60g/m

036T 3/8”-5/8” 30 15 5 60g/m

42 3/8”-5/8” 50 30 5 60g/m

48 3/8”-5/8” 50 30 5 60g/m

60 3/8”-3/4” 50 30 5 60g/m

MAXIMUM PIPES LENGTH & HEIGHT

TUBES O.D. LENGTH(A) LENGTH OF

PRECHARGE

ADDITIONAL

CHARGE

HEIGHT(B)

INSTALLATION OF TUBING ON WALL SUPPORT

- After choosing your coolant tubing input location (right, left or rear), you can set up your tubing. To

do this, use the installation template in order to form the tubes correctly and thus facilitate

connection.

11

- Fit the nuts of the (for med) tubing into the recess provided on the template.

- Secure the tubing with the clamps provided.

- Remove the tubing template; you can now install your unit on its support.

INSTALLATION OF TUBING ON WALL SUPPORT

- Locate the LIQUID tube above the GAS tube.

NOTE

output to the rear

- The slanted hole prevents

condensates or rain from

entering the unit.

- Fit a Dia. 70 mm sleeve into

the hole.

ENGLISH

2 Connect the vacuum pump with the flare coupling of the outdoor unit equipped with a process

valve.

3 Start the vacuum pump and check that the needle of the indicator goes down to - 0,2 mm Hg.

The pump should run during at least 15 minutes.

4 Before disconnecting the vacuum pump, check that the vacuum indicator remains in the same

position during five minutes.

5 Disconnect the vacuum pump.

6 Remove the cap of the "GAS" and "LIQUID" valves and open them with a hexagonal wrench to

free the R410A contained in the outdoor unit.

7 Check that the linking pipes are sealed. Use an electronic leak detector or a soapy sponge.

VACUUM OF COOLING PIPES AND INDOOR UNIT

- Only the outdoor unit is charged with R410A cooling fluid. The indoor unit contains a small quantity

of a neutral gas. This the reason it is imperative to vacuum the linking pipes and the indoor unit.

ASSEMBLY

- The outdoor unit is equipped with a valve allowing to vacuum the installation (large valve)

1 Connect the connecting pipes to the outdoor unit by FLARE NUTS and to the indoor unit by

BRAZING

- To obtain the right tightening, cover the sur face with cooling oil.

- The use of a counter wrench is required to tighten the valves.

- The values of the tightening torque are shown in the table below.

1

Pipe Diameter Tightening Torque

1/4Inch) 15-30 (N·m)

3/8Inch) 35-40 (N·m)

5/8Inch) 60-65 (N·m)

1/2Inch) 45-50 (N·m)

3/4Inch) 70-75 (N·m)

7/8Inch) 80-85 (N·m)

100

40

8

BA

L 30 m

ELECTRICAL CONNECTION BETWEEN INDOOR AND OUTDOOR UNIT

ELECTRICAL REQUIREMENTS

Electrical wiring and connections should

be made by qualified electricians and in

accordance with local electrical codes

and regulation. The air conditioner units

must be grounded.

The air conditioner unit must be

connected to an adequate power outlet

from a separate branch circuit protected

by a time delay circuit breaker, as

specified on unit's nameplate.

Voltage should not vary beyond 10% of

the rated voltage.

An all-pole disconnection switch having a

contact separation of at least 3mm in all

poles should be connected in fixed wiring.

1. To connect the indoor unit to the

outdoor unit use the following electrical

cables.

Electrical connections:

NOTES: The wire color code can be

selected by the installer.

2. Prepare the needed cables for

electrical connection.

3. Connect the cable ends to the

terminals of the indoor and outdoor

units.

4. Secure the multiple wire power cable

with the cable clamps.

The temperature of refrigerant

circuit will be high, please keep

the interconnection cable away

from the copper tube.

1

Power supply 9K 12K 18K

24K 30K 36K (1 PH)

 'HVF . ..3+ .3+

ķ

3RZHU&DEOH2'8 [PP [ PP [PP

ĸ

3RZHU&DEOH,'8

Ĺ

&RPPXQLFDWLRQ

[PP

[PP

Power supply 36K (3PH)

42K 48K

ENGLISH

A) HEATING INDICATOR

Lights during operation.

Heating and filtering the air in the room. Keeping the required ambient temperature.

B) COOLING INDICATOR

Lights during operation.

Cooling, humidifying and filtering the air in the room. keeping the required ambient temperature.

C) POWER INDICATOR

Lights as the unit is energised.

INDICATOR LIGHTS AND CONTROLS ON THE UNIT

1

Cleaning of air filter

Your air conditioner has an air filter clogging indicator light. When this indicator light F comes on, the

filter must be cleaned.

- To remove the filter, pull the inlet grid forward and press the filters slightly downwards to unclip

them.

- Reset the unit by pressing the Reset button. The filter indicator light F goes out.

Do not operate the air conditioner without the filter !

Cleaning of the air conditioner

- Rub the inside of the unit with a soft, dry cloth.

- Do not use hot water or volatile detergents, which could damage the face of the air conditioner.

Precautions to be taken

- Check that there are no obstacles preventing the flow of inlet air and pulsed air, on both the indoor

and outdoor units.

- Check that the air conditioner is correctly connected.

Protection of the electronic system

- The indoor unit and the remote control must not be located less than one metre from a television

set, a radio or any other electrical appliance, in order to avoid interference.

- Protect the unit against direct sunlight.

Replacement of the remote control batteries

- Remove the batteries from the remote control unit via the rear flap.

- Fit two new 1.5 V type AAA dry cell batteries.

- Used batteries must be recycled.

ACTIVE CHARCOAL FILTER

- An active charcoal filter and its support are supplied as accessories with your product. (1 per filter)

- in order to optimise air filtration, you can install it as follows.

MAINTENANCE AND REPAIR

BEFORE UNDERTAKING MAINTENANCE OPERATIONS, MAKE SURE THAT THE AIR

CONDITIONER IS DISCONNECTED FROM THE MAINS.

SERVICING

Routine servicing

- To ensure the correct operation of the installation, it is necessary to have preventive maintenance

of the indoor and outdoor units carried out by qualified personnel.

General installation

- Carry out a visual inspection of the complete installation in service.

- Check the general cleanness of the installation, and check that the condensate evacuations are

not blocked, particularly on the indoor unit, before the summer season.

- Check the condition of the tray.

OUTDOOR UNIT

Coolant system

- Clean the heat exchanger using a special product for aluminium-copper heat exchangers, and

rinse with water. Do not use hot water or steam, as this could cause the pressure of the coolant to

increase.

- Check that the surface of the aluminium fins of the heat exchanger is not damaged by impacts or

scratches, and clean with an appropriate tool if necessary.

Electrical section

- Check that the main power supply cable is not damaged or altered in such a way as to affect the

insulation.

- Check that the interconnecting cables between the two units are not damaged or altered, and that

they are correctly connected.

- Check the earth connection.

INDOOR UNIT

- In order for the installation to operate correctly, it is essential to regularly clean the air filter located

in the intake of the indoor unit.

- When clogged, the filter reduces the air flow through the heat exchanger of the indoor unit, which

in turn reduces the efficiency of the installation and inhibits the cooling of the fan motor.

- Check the cleanness of the indoor heat exchanger.

CAUTION

BEFORE CARRYING OUT ANY OPERATION ON THE EQUIPMENT, CHECK THAT THE

ELECTRICAL POWER SUPPLY IS SWITCHED OFF AND THAT IT CANNOT BE SWITCHED ON

INADVERTENTLY.



ENGLISH

GB

Comfort Range

DC INVERTER

R410A

DEUTSCH

FP

DEUTSCH

11

13

15

Strona jest ładowana ...

Airwell Comfort series Installation Instructions Manual

Ten podręcznik jest również odpowiedni dla

Airwell Comfort series Installation Instructions Manual

w innych językach

Inne dokumenty