Philips BN040C LED20-20/CW-WW L1200 Instrukcja obsługi
- Typ
- Instrukcja obsługi
TwinGlow Batten
BN040C
Mounting Instruction
IP20
X2
Installation
Cable Connection
Unit (mm)
IEC
60598
Wall Mounting
Suggest to use IP20 or above terminal box
(dimension is not smaller than 10x20x25mm,
not provided)
1. The luminaire shall be installed by a qualied electrician and wired in accordance with the latest IEE electrical
regulations or the national requirements.
2. Do not switch on before complete installation.
3. The external exible cable or cord of this luminaire cannot be replaced; if the cord is damaged,
the luminaire shall be destroyed.
4.The light source of this luminaire is not replaceable; when the light source reaches its end of life
the whole luminaire shallbe replaced.
5
The corrosive atmosphere or hazardous materials such as sulfur, chlorine, phthalate, etc must be
avoided during the use and storage.
.
60227 IEC 53 2X0.75mm²
Brown — L
Blue — N
Product Type
Power(W)
Vol. / Fre.
220-240V
50/60Hz
20 0.42
3000K
/6500K
32 67.51184BN040C LED20-20/CW-WW L1200
L(mm) W(mm) H(mm) CCT
30
8
Mounting distance
luminous surface/Light areas
Color temperature(luminous surface) changed
Unit (mm)
LIFE
L70
20K Hrs
220V
240V 50Hz
60Hz
Philips and the Philips shield emblem are registered trademarks of Koninklijke Philips N.V.
QC
PASS
01
L±3
W
H
Up light(3000K)
Down light(6500K)
In order to do change setting, please do switching within 5 seconds.
This product comes with scene memory. So, whatever scene is there, 10sec after turn
o, will stay in memory. Next time switching on will give the same scene setting as last time.
Remark:
The scene setting is always in this sequence – Down light / Up light / Both.
If one switch control more luminaires, Quickly Toggle switch On three
times within 1.2s, All luminaires set to Down light scene.
2
1
1
2
ON ON
ONOFFON
<5sec
ON
<5sec
ONOFFONOFFON
Down
light
Up Up
light
+
Down
light
600-800
-
1
