Note:
l
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse
cover is lost then the plug must
not be used until a replacement
can be obtained. The correct fuse
cover is identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
l
If a non-rewireable plug is cut
off it must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
l
This appliance conforms to EC
Regulation 1935/2004 on materials
and articles intended to come into
contact with food.
before using for the first time
l
Remove the cups and spoons from
the kettle.
l
Fill to ‘MAX’, boil, then pour the
water away. Repeat 2 to 3 times.
l
Wash the cups and spoons and then
dry.
key
a hinged lid
b lid release catch
c on/off switch
d indicator light
e water level windows
f cord clip
g filter
h 2 cups
i 2 spoons
j dual voltage selector
to use your travel jug
kettle
1 Remove the cups and spoons from
the kettle.
2 Select the required voltage by
turning the selector control j.
Always check that you have
selected the correct voltage
before using the kettle.
3 Fill the kettle through either the spout
or lid. To open the lid, pull back the
lid release catch b. The water level
must be between ‘MAX’ and 1 cup
(200mls).
l
Be economical: do not boil more
water than you need.
l
To improve the quality of your drinks
always use fresh water.
l
Empty the kettle after each use.
4 Check the lid is closed.
5 Plug in and switch on. The indicator
light d will come on.
6 Your kettle will boil and switch off
automatically. To re-boil, wait a few
seconds - the on/off switch needs
time to reset.
l
If you experience problems
with your kettle switching
on and off during use or
switching off before boiling,
check that the flat element
is free from scale - see
“descaling”.
l
Take care when using the cups and
do not overfill above the inner rim
(approx. 200mls).
l
Your kettle is fitted with a filter to
hold back limescale particles.
l
If you find drops of water under
your kettle, don’t worry - it is just
condensation.
boil-dry protection
l
If you switch on with too little water,
your kettle will cut out automatically.
Switch off, unplug and let it cool
down before re-filling. When it has
cooled down, the switch will reset
itself.
care and cleaning
l
Before cleaning, unplug your kettle
and let it cool down.
l
The cups and spoons can be placed
in the kettle for compact storage.
l
Wrap the cord around the kettle and
secure using the cord clip 1.
the outside
l
Wipe with a damp cloth, then dry.
Do not use abrasives - they will
scratch the plastic surfaces.
the inside
l
Even though your kettle comes with
a filter, you still need to clean the
inside (and the filter) regularly.
4