Panasonic WHADC0916H9E8 Instrukcja obsługi

English (EN)

Dansk (DA)

Español (ES)

Italiano (IT)

Nederlands (NL)

Polski (PL)

Ελληνικά (EL)

Český (CZ)

Français (FR)

Deutsch (DE)

Türkçe (TR)

Svenska (SV)

Norsk (NO)

Suomi (FI)

Magyar (HU)

Slovenščina (SL)

Hrvatski (HR)

Lietuvių (LT)

Operating Instructions

Air-to-Water Hydromodule + Tank

Model No.

Indoor Unit

WH-ADC0309H3E5

Outdoor Unit

WH-UD03HE5-1

WH-UD05HE5-1

WH-UD07HE5-1

WH-UD09HE5-1

Indoor Unit

WH-ADC1216H6E5

Outdoor Unit

WH-UD12HE5

WH-UD16HE5

WH-UX09HE5

WH-UX12HE5

Indoor Unit

WH-ADC0916H9E8

Outdoor Unit

WH-UD09HE8

WH-UD12HE8

WH-UD16HE8

WH-UX09HE8

WH-UX12HE8

WH-UX16HE8

WH-UQ09HE8

WH-UQ12HE8

WH-UQ16HE8

Manufactured by:

Panasonic AVC Networks Czech, s.r.o.

U Panasoniku 1, 320 84 Plzeň , Czech Republic

Operating Instructions

Air-to-Water Hydromodule + Tank

2-27

Betjeningsvejledning

Luft-til-vand hydromodul + Tank

28-53

Instrucciones de funcionamiento

Hydrokit Aire-Agua + Tanque

54-79

Istruzioni operative

Idromodulo aria-acqua + serbatoio

80-105

Gebruiksaanwijzing

Lucht-naar-water Hydromodule + Tank

106-131

Instrukcja obsługi

Hydromoduł powietrze-woda + zbiornik

132-157

Οδηγίες λειτουργίας

Υδρομονάδα Αέρα-Νερού + Δεξαμενή

158-183

Návod k použití

Hydromodul vzduch-voda + zásobník

184-209

Mode d’emploi

Ballon + Module Hydraulique Air/Eau

210-235

Bedienungsanleitung

Luft/Wasser-Hydromodul + Warmwasserspeicher

236-261

Kullanım Kılavuzu

Hava-Su Hidromodülü + Tank

262-287

Bruksanvisning

Luft-till-vatten hydromodul + Tank

288-313

Bruksanvisninger

Luft-til-vann Hydromodul + Tank

314-339

Käyttöohjeet

Ilma-vesikiertomoduuli + säiliö

340-365

Használati útmutató

Levegő-víz hidromodul + tartály

366-391

Navodila za uporabo

Hidromodul Zrak - Voda + Rezervoar

392-417

Upute za rad

Hidromodul zrak-voda + spremnik

418-443

Naudojimo instrukcijos

Hidromodulis oras-vanduo + rezervuaras

444-469

ACXF55-29140

2

Table of contents

Safety precautions ��4-6

Remote Controller buttons and display ��7-9

Initialization �� 9

Quick Menu ��10

Menus ��10-23

For user

1 Function setup �� 10-11

1�1 Weekly timer

1�2 Holiday timer

1�3 Quiet timer

1�4 Room heater

1�5 Tank heater

1�6 Sterilization

1�7 DHW mode

2 System check ��12

2�1 Energy monitor

2�2 Water temperatures

2�3 Error history

2�4 Compressor

2�5 Heater

3 Personal setup ��12-13

3�1 Touch sound

3�2 LCD contrast

3�3 Backlight

3�4 Backlight intensity

3�5 Clock format

3�6 Date & Time

3�7 Language

3�8 Unlock password

4 Service contact �� 13

4�1 Contact 1 / Contact 2

For installer

5 Installer setup > System setup ��14-18

5�1 Optional PCB connectivity

5�2 Zone & Sensor

5�3 Heater capacity

5�4 Anti freezing

5�5 Buffer tank connection

5�6 Base pan heater

5�7 Alternative outdoor sensor

5�8 Bivalent connection

5�9 External SW

5�10 Solar connection

5�11 External error signal

5�12 Demand control

5�13 SG ready

5�14 External compressor SW

5�15 Circulation liquid

5�16 Heat-Cool SW

5�17 Force heater

6 Installer setup > Operation setup ��18-22

6�1 Heat

6�2 Cool

6�3 Auto

6�4 Tank

7 Installer setup > Service setup ��22-23

7�1 Pump maximum speed

7�2 Pump down

7�3 Dry concrete

7�4 Service contact

Cleaning instructions ��24

Troubleshooting ��25-26

Information ��27

Thank you for purchasing Panasonic product.

Before operating the system, please read these operating instructions thoroughly and keep them for future reference�

Installation Instructions attached�

Serial number and production year please refer to name plate�

Operating conditions

WH-UD series WH-UX series, WH-UQ series

*

1

COOLING

(CIRCUIT)

HEATING

(TANK)

HEATING

(CIRCUIT)

HEATING

(TANK)

HEATING

(CIRCUIT)

Water outlet temperature (°C)

(Min� / Max�)

- / 65* 20 / 55 - / 65*

20 / 55 (Below Ambient -15 °C) *

3

20 / 60 (Above Ambient -10 °C) *

3

5 / 20

Outdoor ambient temperature (°C)

(Min� / Max�)

-20 / 35 -28 / 35 16 / 43

When the outdoor temperature is out of the range in the table, the heating capacity will drop signicantly and the outdoor unit may

stop operating for its protection�

The unit will restart automatically after the outdoor temperature returns to the specied range.

* Above 55 °C, only possible with backup heater operation�

*

3

Between outdoor ambient -10 °C and -15 °C, the water outlet temperature gradually decreases from 60 °C to 55 °C�

3

EN

Before use, make sure the system has been installed correctly by an

authorised dealer according to the given instructions�

•Panasonic Air-to-Water is a split system, consisting of two units: indoor and outdoor units� The indoor unit consist of the

hydromodule and 200L sanitary water tank�

•These operating instructions describe how to operate the system using the indoor and outdoor units�

•As for the operation of other products such as radiator, external thermo controller, and underoor units, refer to the operating

instructions of each product�

•System could be locked to operate in HEAT mode and disable COOL mode�

•Some functions described in this manual may not be applicable to your system�

•Must use water that complies with European water quality standard 98/83 EC� The lifespan of the Tank Unit will be shorter if

groundwater (include spring water and well water) is used�

•The Tank Unit shall not be used with the tap water containing contaminants such as salt, acid, and other impurities which may

corrode the tank and its component�

•Consult your nearest authorised dealer for further information�

*¹ The system is locked to operate without COOL mode� It can be unlocked only by authorised installers or our authorised service

partners�

*² Only displayed when COOL mode is unlocked (This means when COOL mode is available)

System overview

Radiator

Shower

Fan Coil

Unit

Floor

Heating

Outdoor Unit

Solar Panel

Power Supply

The illustrations in this manual are for explanation purposes only and may differ from the actual unit�

They are subject to change without notice for future improvement�

Note:

Not recommended to open the Front Plate�

(For authorised dealer/specialist use only)

Indoor Unit

Remote Controller

Front Plate

4

Safety precautions

To prevent personal injury, injury to

others or property damage, please

comply with the following:

Incorrect operation due to failure to

follow instructions below may cause

harm or damage, the seriousness of

which is classied as below:

WARNING

This sign warns of

death or serious

injury�

CAUTION

This sign warns of

injury or damage

to property�

The instructions to be followed are

classied by the following symbols:

This symbol denotes

an action that is

PROHIBITED�

These symbols denote

actions COMPULSORY�

WARNING

Indoor unit and outdoor

unit

This appliance may be used by

children aged from 8 years and

above and persons with reduced

physical, sensory or mental

capabilities or lack of experience

and knowledge if they have been

given supervision or instruction

concerning use of the appliance

in a safe way and understand

the hazards involved� Children

shall not play with the appliance�

Cleaning and user maintenance

shall not be made by children

without supervision�

Please consult an authorised

dealer or specialist to clean the

internal parts, repair, install,

remove, disassemble and

reinstall the unit� Improper

installation and handling will

cause leakage, electric shock or

re.

Conrm with an authorised

dealer or specialist on usage of

any specied refrigerant type.

Using refrigerant type other than

the specied may cause product

damage, burst and injury etc�

5

EN

Do not install the unit in

a potentially explosive or

ammable atmosphere. Failure

to do so could result in re.

Do not insert your ngers

or other objects into the

indoor or outdoor unit; the

rotating parts may cause

injury�

Do not touch the outdoor unit

during lightning, it may cause an

electric shock�

Do not sit or step on the

unit, you may fall down

accidentally�

Do not install the indoor unit

outdoors� This is designed for

indoor installation only�

Power supply

Do not use a

modied cord, joint

cord, extension

cord or unspecied

cord to prevent

overheating and re.

To prevent overheating, re or

electric shock:

•Do not share the same power

outlet with other equipment�

•Do not operate with wet hands�

•Do not bend or twist power

supply cord�

If the supply cord is damaged,

it must be replaced by the

manufacturer, service agent or

similarly qualied persons in

order to avoid a hazard�

This unit is equipped with

Residual Current Circuit

Breaker/Earth Leakage Circuit

Breaker (RCCB/ELCB)� Ask

an authorised dealer to check

RCCB/ELCB operation regularly,

especially after installation,

inspection, and maintenance�

RCCB/ELCB malfunction may

result in electric shock and/or

re.

It is strongly recommended that

Install Residual Current Device

(RCD) on-site to prevent electric

shock and/or re.

Before obtaining access to

terminals, all supply circuits must

be disconnected�

Stop using the product if any

abnormality/failure occurs and

disconnect the power supply�

(Risk of smoke/re/electric

shock)

Examples of abnormality/failure

•RCCB/ELCB trips frequently�

•Burning smell is observed�

•Abnormal noise or vibration of

the unit is observed�

•Hot water leaks from the indoor

unit�

Contact your local dealer

immediately for maintenance/

repair�

Wear gloves during inspection

and maintenance�

Safety precautions

6

Safety precautions

This equipment must be earthed

to prevent electrical shock or re.

Prevent electric shock by

disconnecting the power supply

- Before cleaning or servicing�

- When extended non-use�

This appliance is for multiple

uses� To avoid electric shock,

burn and/or fatal injury, make

sure to disconnect all power

supplies before accessing any

terminal in the indoor unit�

CAUTION

Indoor unit and outdoor

unit

Do not wash the indoor unit

with water, benzine, thinner

or scouring powder to avoid

damage or corrosion on the unit�

Do not install the unit close

to any combustibles or at

bathroom� Otherwise, it may

cause electric shock and/or re.

Do not touch the water discharge

pipe of the indoor unit during

operation�

Do not place any material on the

unit or under it�

Do not touch the sharp

aluminium n; sharp parts

may cause injury�

Do not use the system during

sterilisation in order to prevent

scalding with hot water, or

overheating of shower�

Prevent water leakage by

ensuring that the drainage pipe

is connected properly�

After a long period of use, make

sure the installation rack is not

deteriorated� The deteriorated

rack may cause the unit to fall

down�

Ask an authorised dealer

to determine the level of

sterilisation function eld settings

according to the local laws and

regulations�

Remote Controller

Do not wet the Remote

Controller� Failure to do so may

result in electric shock and/or

re.

Do not press the buttons on the

Remote Controller using hard

and sharp objects� Failure to do

so may cause damage to the

unit�

Do not wash the Remote

Controller using water, benzine,

thinner or scouring powder�

Do not inspect or maintain the

Remote Controller by yourself�

Consult an authorised dealer in

order to prevent personal injury

caused by incorrect operation�

7

EN

Remote Controller buttons and display

Buttons / Indicator

1

Quick Menu button

(For more details, refer to the separate

Quick Menu Guide�)

2

Back button

Returns to the previous screen

3 LCD Display

4

Main Menu button

For function setup

5

ON/OFF button

Starts/Stops operation

6

Operation indicator

Illuminates during operation, blinks during

alarm�

Press centre

No glove

No pen

2

1

4

5

6

3

Cross key buttons

Selects an item�

Enter button

Fixes the selected content�

Up

Down

Left Right

Safety precautions / Remote Controller buttons and display

8

Remote Controller buttons and display

Display

1 Mode selection

AUTO

•Depending on the preset outdoor

temperature, the system selects

HEAT or *

1

COOL operation mode�

Auto Heat Auto Cool

*

1,

*

2

COOL •The fan coil unit is either turned

ON or OFF�

•The outdoor unit provides cooling

to the system�

AUTO

+ TANK

•Depending on the preset outdoor

temperature, the system selects

HEAT + TANK or *

1

COOL + TANK

operation mode�

Auto Heat Auto Cool

*

1,

*

2

COOL

+ TANK

•The outdoor unit provides cooling

to the system�

•The system controls the booster

heater in the water tank�

HEAT

•The panel/oor HEAT operation is

either turned ON or OFF�

•The outdoor unit provides heat to

the system�

TANK

•The water tank is either turned

ON or OFF�

•The outdoor unit provides heat to

the water tank�

HEAT

+ TANK

•The outdoor unit provides heat to

the water tank and the system�

•This mode can be selected only

when the water tank is installed�

* The direction icons point to the currently

active mode�

•Room operation / Tank operation�

•Deice operation�

2

Operation icons

The status of operation is displayed�

Icon will not display (under operation OFF screen) whenever operation is OFF except weekly timer�

Holiday operation status Weekly Timer operation status Quiet operation status

Zone: Room Thermostat

→Internal sensor status

Powerful operation status

Demand Control or

SG ready or SHP status

Room Heater status Tank Heater status Solar status

Bivalent status

(Boiler)

*

1

The system is locked to operate without COOL mode� It can be unlocked only by authorised installers or our authorised service partners�

*

2

Only displayed when COOL mode is unlocked (This means when COOL mode is available)�

2 43

1

5

6

7

9

EN

Initialization

Before starting to install the various menu settings, please initiate the Remote Controller by selecting the language of

operation and installing the date and time correctly�

It is recommended that the installer conducts the following initialization of the Remote Controller�

Selecting the language

LCD blinking

Press and wait while the display is

initializing.

1

Scroll with

and to select the language.

2

Press

to conrm the selection.

Setting the clock

1

Select with

or how to display the time,

either 24h or am/pm format (for example, 15:00

or 3 pm).

2

Press

to conrm the selection.

3

Use

and to select year, month, day,

hour and minutes. (Press to conrm the

selection each time.)

4

Once the time is set, time and day will appear

on the display even if the Remote Controller is

turned OFF.

3 Temperature of each zone

4 Time and day

5 Water Tank temperature

6 Outdoor temperature

7 Sensor type/Set temperature type icons

Water Temperature

→Compensation curve

Water Temperature

→Direct

Pool only

Room Thermostat

→External

Room Thermostat

→Internal

Remote Controller buttons and display / Initialization

10

Menus

For user

Select menus and determine settings according to the system

available in the household� All initial settings must be done by an

authorised dealer or a specialist� It is recommended that all alterations

of the initial settings are also done by an authorised dealer or a

specialist�

•After initial installation, you may manually adjust the settings�

•The initial setting remains active until the user changes it�

•The Remote Controller can be used for multiple installations�

•Ensure the operation indicator is OFF before setting�

•The system may not work properly if set wrongly�

Please consult an authorised dealer�

To display <Main Menu>:

To select menu:

To conrm the selected content:

After the initial settings have been completed, you can select a quick menu from the following options and edit the setting�

1

Press

to display the quick menu.

Force DHW Powerful Quiet Force Heater

Weekly Timer Force Defrost Error Reset R/C Lock

2

Use

to select menu.

3

Press

to turn on/off the select menu.

Quick Menu

Menu Default Setting Setting Options / Display

1 Function setup

1.1

Weekly timer

Once the weekly timer is set up,

User can edit from Quick Menu�

To set up to 6 patterns of

operation on a weekly basis�

•Disabled if Heat-Cool SW is

pressed or if Force Heater

is on�

Timer setup

Select day of the week and

set the patterns needed

(Time / Operation ON/OFF / Mode)

Timer copy

Select day of the week

11

EN

Menu Default Setting Setting Options / Display

1.2

Holiday timer

To save energy, a holiday

period may be set to either turn

OFF the system or lower the

temperature during the period�

OFF

ON

Holiday start and end�

Date and time

OFF or lowered temperature

•Weekly timer setting may be temporarily disabled during Holiday timer setting

but it will be restored once the Holiday timer is completed�

1.3

Quiet timer

To operate quietly during the

preset period�

6 patterns may be set�

Level 0 means the mode is off�

Time to start Quiet :

Date and time

Level of quietness:

0 ~ 3

1.4

Room heater

To set the room heater ON or

OFF�

OFF

1.5

Tank heater

To set the tank heater ON or

OFF�

OFF

1.6

Sterilization

To set the auto sterilization ON

or OFF�

ON

•Do not use the system during sterilization in order to prevent scalding with hot water, or overheating of shower�

•Ask an authorised dealer to determine the level of sterilization function eld settings according to the local laws and

regulations�

1.7

DHW mode (Domestic Hot Water)

To set the DHW mode to

Standard or Smart�

•Standard mode have faster

DHW Tank heat up time�

Meanwhile Smart mode

take longer time to heat up

DHW time with lower energy

consumption�

Standard

Menus

For user

Quick Menu / Menus

12

Menus

For user

Menu Default Setting Setting Options / Display

2 System check

2.1

Energy monitor

Present or historical chart of

energy consumption, generation

or COP�

Present

Select and retrieve

Historical chart

Select and retrieve

•COP= Coefcient of Performance.

•For historical chart, the period is selected from 1 day/1 week/1year�

•Energy consumption (kWh) of heating, *

1

cooling, tank and total may be

retrieved�

•The total power consumption is an estimated value based on AC 230 V and

may differ from value measured by precise equipment�

2.2

Water temperatures

Shows all water temperatures in

each area�

Actual water temperature of 8 items:

Inlet / Outlet / Zone 1 / Zone 2 / Tank / Buffer

tank / Solar / Pool

Select and retrieve

2.3

Error history

•Refer to Troubleshooting for

error codes�

•The most recent error code is

displayed at the top�

Select and retrieve

2.4

Compressor

Shows the compressor

performance�

Select and retrieve

2.5

Heater

Total hours of ON time for

Room heater/Tank heater�

Select and retrieve

3 Personal setup

3.1

Touch sound

Turns the operation sound ON/

OFF�

ON

3.2

LCD contrast

Sets the screen contrast�

3

*

1

The system is locked to operate without COOL mode� It can be unlocked only by authorised installers or our authorised service partners�

*

2

Only displayed when COOL mode is unlocked (This means when COOL mode is available)�

13

EN

Menu Default Setting Setting Options / Display

3.3

Backlight

Sets the duration of screen

backlight�

1 min

3.4

Backlight intensity

Sets screen backlight

brightness�

4

3.5

Clock format

Sets the type of clock display�

24h

3.6

Date & Time

Sets the present date and time�

Year / Month / Day / Hour / Min

3.7

Language

Sets the display language for

the top screen�

•For Greek, please refer to the

English version�

ENGLISH / FRANÇAIS / DEUTSCH /

ITALIANO / ESPAÑOL / DANISH /

SWEDISH / NORWEGIAN /

POLISH / CZECH / NEDERLANDS /

TÜRKÇE / SUOMI / MAGYAR /

SLOVENŠČINA / HRVATSKI / LIETUVIŲ

3.8

Unlock password

4 digit password for all the

settings�

0000

4 Service contact

4.1

Contact 1 / Contact 2

Preset contact number for

installer�

Select and retrieve

Menus

14

Menus

For installer

Menu Default Setting Setting Options / Display

5 Installer setup System setup

5.1

Optional PCB connectivity

To connect to the external PCB

required for servicing�

No

•If the external PCB is connected (optional), the system will have following additional functions:

1

Buffer tank connection and control over its function and temperature�

2

Control over 2 zones (including the swimming pool and the function to heat water in it)�

3

Solar function (the solar thermal panels connected to either the DHW (Domestic Hot Water) Tank or the Buffer Tank�

4

External compressor switch�

5

External error signal�

6

SG ready control�

7

Demand control�

8

Heat-Cool SW

5.2

Zone & Sensor

To select the sensors and to

select either 1 zone or 2 zone

system�

Zone

•After selecting 1 or 2 zone system, proceed

to the selection of room or swimming pool�

•If the swimming pool is selected, the

temperature must be selected for

T temperature between 2 °C ~ 10 °C�

Sensor

* For room thermostat, there is a further

selection of external or internal�

5.3

Heater capacity

To reduce the heater power if

unnecessary�*

3 kW / 6 kW / 9 kW

* Options of kW vary depending

on the model�

5.4

Anti freezing

To activate or deactivate the

water freeze prevention when

the system is OFF

Yes

5.5

Buffer tank connection

To connect tank to the system

and if selected YES, to set

T temperature�

•The optional PCB connectivity

must be selected YES to

enable the function�

•If the optional PCB

connectivity is not selected,

the function will not appear on

the display�

No

Yes

5 °C Set

T for Buffer Tank

15

EN

Menus

Menu Default Setting Setting Options / Display

5.6

Base pan heater

To select whether or not

optional base pan heater is

connected�

* Type A - The base pan heater

activates only during

deice operation�

* Type B -The base pan heater

activates when outdoor

ambient temperature is

5 °C or lower�

No

Yes

A

Set base pan heater

type*�

5.7

Alternative outdoor sensor

To select an alternative outdoor

sensor�

No

5.8

Bivalent connection

To select a bivalent connection

to allow an additional heat

source such as a boiler to heat-

up the buffer tank and domestic

hot water tank when heatpump

capacity is insufcient at low

outdoor temperature� The

bivalent feature can be set-up

either in alternative mode

(heatpump and boiler operate

alternately), or in parallel

mode (both heatpump and

boiler operate simultaneously),

or in advance parallel mode

(heatpump operates and boiler

turns on for buffer-tank and/or

domestic hot water depending

on the control pattern setting

options)�

No

Yes

-5 °C

Set outdoor

temperature for

turn ON Bivalent

connection�

Yes After selecting the outdoor temperature

Control pattern

Alternative / Parallel / Advanced parallel

•Select advanced parallel for bivalent use of

the tanks�

Control pattern

Advanced parallel

Heat Selection of the tank

•“Heat” implies Buffer Tank and “DHW”

implies Domestic Hot Water Tank�

16

Menus

For installer

Menu Default Setting Setting Options / Display

Control pattern Advanced parallel Heat Yes

•Buffer Tank is activated only after selecting

“Yes”�

-8 °C

Set the temperature

threshold to start the

bivalent heat source�

0:30

Delay timer to start

the bivalent heat

source

(in hour and minutes)�

-2 °C

Set the temperature

threshold to stop the

bivalent heat source�

0:30

Delay timer to stop

the bivalent heat

source

(in hour and minutes)�

Control pattern Advanced parallel DHW Yes

•DHW Tank is activated only after selecting

“Yes”�

0:30

Delay timer to start

the bivalent heat

source

(in hour and minutes)�

5.9

External SW

No

17

EN

Menus

Menu Default Setting Setting Options / Display

5.10

Solar connection

•The optional PCB connectivity

must be selected YES to

enable the function�

•If the optional PCB

connectivity is not selected,

the function will not appear on

the display�

No

Yes

Buffer tank Selection of the tank

Yes After selecting the tank

10 °C

Set

T ON

temperature

Yes After selecting the tank T ON temperature

5 °C

Set

T OFF

temperature

Yes After selecting the tank T ON temperature T OFF temperature

5 °C

Set Antifreeze

temperature

Yes After selecting the tank T ON temperature T OFF temperature

After setting the antifreeze temperature

80 °C Set Hi limit

5.11

External error signal

No

5.12

Demand control

No

18

Menus

For installer

Menu Default Setting Setting Options / Display

5.13

SG ready

No

Yes

120 %

Capacity (1) & (2) of

Buffer Tank and DHW

Tank (in %)

5.14

External compressor SW

No

5.15

Circulation liquid

To select whether to circulate

water or glycol in the system�

Water

5.16

Heat-Cool SW

No

5.17

Force heater

To turn on Force heater either

manually (by default) or

automatically�

Manual

6 Installer setup Operation setup

To access to the four major

functions or modes�

4 main modes

Heat / *

1,

*

2

Cool / Auto / Tank

6.1

Heat

To set various water & ambient

temperatures for heating�

Water temp� for heating ON /

Outdoor temp� for heating OFF /

T for heating ON /

Outdoor temp� for heater ON

*

1

The system is locked to operate without COOL mode� It can be unlocked only by authorised installers or our authorised service partners�

*

2

Only displayed when COOL mode is unlocked (This means when COOL mode is available)�

19

EN

Menus

Menu Default Setting Setting Options / Display

Water temp. for heating ON

Compensation curve

Heating ON

temperatures in

compensation curve

or direct input�

Water temp. for heating ON Compensation curve

X axis: -5 °C, 15 °C

Y axis: 55 °C, 35 °C

Input the 4

temperature points

(2 on horizontal X

axis, 2 on vertical Y

axis)�

•Temperature range: X axis: -15 °C ~ 15 °C, Y axis: See below

•Temperature range for the Y axis input:

1� WH-UD model: 20 °C ~ 55 °C

2� WH-UH model & Back up heater is enabled: 25 °C ~ 65 °C

3� WH-UH model & Back up heater is disabled: 35 °C ~ 65 °C

4� WH-UX/UQ model: 20 °C ~ 60 °C

•If 2 zone system is selected, the 4 temperature points must also be input for Zone

2�

•“Zone 1” and “Zone 2” will not appear on the display if only 1 zone system�

Water temp. for heating ON Direct

35 °C

Temperature for

heating ON

•Min� ~ Max� range is conditional as follows:

1� WH-UD model: 20 °C ~ 55 °C

2� WH-UH model & Back up heater is enabled: 25 °C ~ 65 °C

3� WH-UH model & Back up heater is disabled: 35 °C ~ 65 °C

4� WH-UX/UQ model: 20 °C ~ 60 °C

Outdoor temp. for heating OFF

24 °C

Temperature for

heating OFF

T for heating ON

5 °C

Set T for heating

ON�

20

Menus

For installer

Menu Default Setting Setting Options / Display

Outdoor temp. for heater ON

0 °C

Temperature for

heater ON

6.2

*

1,

*

2

Cool

To set various water & ambient

temperatures for cooling�

Water temperatures for cooling ON

and

T for cooling ON�

Water temp. for cooling ON

Compensation curve

Cooling ON

temperatures in

compensation curve

or direct input�

Water temp. for cooling ON Compensation curve

X axis: 20 °C, 30 °C

Y axis: 15 °C, 10 °C

Input the 4

temperature points

(2 on horizontal X

axis, 2 on vertical Y

axis)

•If 2 zone system is selected, the 4 temperature points must also be input for Zone

2�

•“Zone 1” and “Zone 2” will not appear on the display if only 1 zone system�

Water temp. for cooling ON Direct

10 °C

Set temperature for

Cooling ON

T for cooling ON

5 °C Set

T for cooling ON

*

1

The system is locked to operate without COOL mode� It can be unlocked only by authorised installers or our authorised service partners�

*

2

Only displayed when COOL mode is unlocked (This means when COOL mode is available)�

Strona się ładuje...

Panasonic WHADC0916H9E8 Instrukcja obsługi

Niniejsza instrukcja jest również odpowiednia dla

Panasonic WHADC0916H9E8 Instrukcja obsługi

w innych językach

Powiązane artykuły

Inne dokumenty