Parkside PLS 48 B1 Operation and Safety Notes

SOLDERING STATION PLS 48 B1

S OLDERING ST ATION

Operation and Safety Notes

REGULOWANA STACJA LUTOWNICZA Z LUTOWNICĄ

Wskazówki dotyczące obsługi i bezpieczeństwa

FORRASZTÓPÁKA

Kezelési és biztonsági utalások

REGELBARE LÖTSTA TION

Bedienungs- und Sicherheitshinweise

NASTAVLJIVA SPAJKALNA POSTAJA

Navodila za upravljanje in varnostna opozorila

REGULOVATELNÁ PÁJECÍ STANICE

Pokyny pro obsluhu a bezpečnostní pokyny

REGULOVATEĽNÁ SPÁJK OV AČKA

Pokyny pre obsluhu a bezpečnostné pokyny

IAN 102652

GB Operation and Safety Notes Page 5

PL Wskazówki dotyczące obsługi i bezpieczeństwa Strona 21

HU Kezelési és biztonsági utalások Oldal 37

SI Navodila za upravljanje in varnostna opozorila Stran 53

CZ Pokyny pro obsluhu a bezpečnostní pokyny Strana 69

SK Pokyny pre obsluhu a bezpečnostné pokyny Strana 83

DE / AT / CH Bedienungs- und Sicherheitshinweise Seite 97

Before reading, unfold the page containing the illustrations and familiarise yourself with all

functions of the device.

Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się z

wszystkimi funkcjami urządzenia.

Olvasás előtt kattintson az ábrát tartalmazó oldalra és végezetül ismerje meg a készülék

mindegyik funkcióját.

Pred branjem odprite stran s slikami in se nato seznanite z vsemi funkcijami naprave.

Před čtením si otevřete stranu s obrázky a potom se seznamte se všemi funkcemi přístroje.

Pred čítaním si odklopte stranu s obrázkami a potom sa oboznámte so všetkými funkciami prístroja.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend

mit allen Funktionen des Gerätes vertraut.

1

6

A

B

7

2

3

4

5

5 GB

Table of contents

Introduction

Proper use ............................................................................... Page 6

Features and equipment ......................................................... Page 7

Included items ......................................................................... Page 7

Technical information ............................................................. Page 7

Safety advice

1. Workplace safety ............................................................... Page 8

2. Electrical safety .................................................................. Page 8

3. Personal safety ................................................................... Page 9

4. Careful handling and use of electrical power tools ........ Page 11

Original accessories / attachments ....................................... Pag e 11

Before first use

Inserting / replacing soldering tips ........................................ Page 12

Using the product

Switching on / off and setting the temperature .................... Page 12

Solder sponge......................................................................... Page 14

Soldering ................................................................................. Page 14

Maintenance and cleaning .................................. Page 15

Service centre ................................................................. Page 15

Warranty ............................................................................ Page 16

Disposal ................................................................................ Page 17

Translation of the original declaration

of conformity / Manufacturer............................ Page 18

6 GB

Introduction

Soldering station PLS 48 B1

Q

Introduction

We congratulate you on the purchase of your new device. You have

chosen a high quality product. The instructions for use are part of the

product. They contain important information concerning safety, use

and disposal. Before using the product, please familiarise yourself with

all of the safety information

and instructions for use. Only use the unit as

de

scribed and for the speciﬁed applications. If you pass the product

on to anyone else, please ensure that you also pass on all the docu-

mentation with it.

Q

Proper use

The appliance is intended for electronic soldering for leisure and DIY

purposes. It is suitable for applications such as soldering work, welding

and gluing plastics and the application of decorations. Use the device

only as described and for the indicated purposes. The device is not in-

tended for commercial use. Any other use or modiﬁcation to the device

shall be considered as improper use and could give rise to considerable

dangers. The manufacturer will not accept liability for loss or damage

arising from improper use.

Introduction

7 GB

Introduction

Q

Features and equipment

1

Soldering pencil

2

ON / OFF switch

3

Accessory compartment

4

Tin solder

5

Solder sponge

6

Temperature regulator

7

Soldering tip

Q

Included items

1 Soldering station with PLS 48 B1 soldering pencil

includes 2 standard soldering tips (1 x mounted)

1 Tin solder, ø 1.0 mm, 10 g

1 Tin solder, ø 1.5 mm, 10 g

1 Solder sponge

1 Operating instructions

Q

Technical information

Electricity supply: 230 V∼

Frequency: 50 Hz

Power consumption: 48 W

Temperature range: 100–500 °C

Mains lead: 1.85 m from the mains plug to the station

1.00 m from the soldering pencil to the station

8 GB

Safety advice

CAUTION! Failure to observe the instructions and ad-

vice given below may result in electric shock, ﬁre and/or

serious injury.

1. Workplace safety

a) Keep your working area clean and well lit. Untidy or

poorly lit working areas can lead to accidents.

b) Do not work with the device in potentially explosive

environments in which there are inflammable liquids,

gases or dusts. Electrical power tools create sparks, which can

ignite dusts or fumes.

c) Keep children and other people away while you are

operating the electrical tool. Distractions can cause you to

lose control of the device.

2. Electrical safety

To avoid danger to life from electric shock:

a)

The mains plug on the device must match

the mains sock-

et. The plug must not be modified in any way. Do not

use an adapter plug with devices fitted with a protec-

tive earth. Unmodiﬁed plugs and matching sockets reduce the

risk of electric shock.

b) Keep the device away from rain or moisture. Water en-

tering an electrical device increases the risk of electric shock.

Safety advice

9 GB

Safety advice

c) Use a residual current device (RCD) for protection if

operating the electrical power tool in a moist environ-

ment is unavoidable. The use of an RCD reduces the risk of

electric shock.

d) Do not use the mains lead for any purpose for which it

was not intended, e.g. to carry the device, to hang up

the device or to pull the mains plug out of the mains

socket. Keep the mains lead away from heat, oil, sharp

edges or moving parts of the device. Damaged or tangled

mains leads increase the risk of electric shock.

e)

Do not operate the device if the mains lead or mains plug is damaged.

A damaged mains lead presents a serious

danger to life from electric shock.

f) Always keep the mains lead out of the operating area and run it

away from the rear of the device.

g) Always pull out the mains plug if you are about to leave the device

unattended or wish to carry out any tasks on the device.

3. Personal safety

a) This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience

and knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved. Children

shall not play with the appliance. Cleaning and user main-

tenance shall not be made by children without supervision.

b) Remain alert at all times, watch what you are doing

and always proceed with caution. Do not use the

device if you are tired or under the influence of drugs,

10 GB

Safety advice

alcohol or medication. One moment of carelessness when

using the device can lead to serious injury.

DANGER OF BURNS! Never touch the hot soldering tip or the

molten solder. You could suﬀer burn injuries. Always let the device

cool before you replace components on the device, clean it or

check its condition.

After use let the soldering pencil cool down in air only. Under no

circumstances quench the tip in water!

CAUTION! DANGER OF FIRE! Place the soldering pencil down

only in the special multifunctional holder or on a ﬁre-resistant pad.

Place the soldering pencil in the multifunctional holder during

pauses in your work.

Keep the device away from combustible material.

Never leave the device switched on and unattended.

CAUTION! DANGER OF INJURY! Keep your hands away

from the hot workpiece. The heat from soldering can be conducted

through the workpiece.

Avoid placing the hot soldering tip in contact with the plastic parts

of the multifunctional holder. Failure to observe this advice may

result in damage to the device.

If a dangerous situation arises, pull the mains plug immediately

out of the mains socket.

CAUTION! DANGER OF POISONING! Do not breathe air

contaminated with soldering fumes.

When working with the device for long periods do not allow the

fumes from soldering to build up. They may be hazardous to health.

Always provide adequate ventilation of your working area. In ad-

dition, it is recommended that you wear protective gloves, a face

mask and a protective apron.

Do not eat, drink or smoke in rooms where soldering is carried out.

Otherwise your hands may transfer any adhering traces of lead

via food or cigarettes into your body.

Safety advice

11 GB

Safety advice

Always wash your hands immediately after soldering.

Do not dispose of soldering waste with the household rubbish.

Soldering waste must disposed of as special waste.

4. Careful handling and use

of electrical power tools

a) When not in use always ensure that electrical power

tools are kept out of reach of children. Do not let any-

one use the device if he or she is not familiar with it

or has not read the instructions and advice. Electrical

power tools are dangerous when they are used by inexperienced

people.

b) Look after the device carefully. Check for broken

parts or parts that are damaged to the extent they

detrimentally affect the functioning of the device.

Have any damaged parts repaired before you use

the device. Many accidents have their origins in poorly main-

tained electrical tools.

Q

Original accessories / attachments

Use only the accessories detailed in the operating instructions. The

use of attachments or accessories other than those recommended

here could lead to you suﬀering an injury.

12 GB

Before first use / Using the product

Q

Before ﬁrst use

Q

Inserting / replacing soldering tips

CAUTION! DANGER OF BURNS! Never allow the soldering pencil

to heat up without a soldering tip.

Remove a soldering tip only when the device has been switched

oﬀ and the soldering tip has cooled.

Turn the soldering tip out to replace it.

You must ‘tin’, i.e. thinly coat with solder, the soldering tip

7

before

using the soldering station for the ﬁrst time and before using a new

soldering tip.

To do this follow these steps:

Insert the mains plug into a mains socket and press the ON / OFF

switch

2

into position “I”.

Turn the thermostat

6

to 3 and wait until the device has heated up.

Then let something solder until a thin cohesive ﬁlm melts oﬀ the sol-

dering tip.

Q

Using the product

Q

Switching on / oﬀ and setting

the temperature

Switching on and setting the temperature:

Insert the mains plug into a mains socket and press the ON / OFF

switch

2

into position “I”.

Using the product

13 GB

Before first use / Using the product

Using the product

Turn the temperature control

6

to set the temperature you wish

to have.

Problems will occur during soldering if an unsuitable solder wire used.

The right soldering temperature must be achieved to produce perfect

soldering. If the temperature is too low the solder does not ﬂow enough

and causes contamination of the solder at the joint, a so-called “cold

joint”. At too high a temperature, the ﬂux (ﬂowing aid) burns and the

solder does not ﬂow. The high temperatures may also damage the

workpiece.

The temperature settings suitable for most soldering tasks are given

below. The precise settings may vary, depending on the solder and the

manufacturer.

Level min = room temperature

Setting 1 = approx. 100 °C – warming up stage and for solder with a

low melting point

Setting 2 = 200 °C melting point of most common soft solders

Setting 3 = 300 °C normal operating temperature, e.g. for using

lead-free solder

Setting 4 = 400 °C high soldering temperature, e.g. for desoldering

small soldered joints

Setting 5 = 500 °C maximum soldering temperature, e.g. for desolder-

ing large soldered joints

Switching off:

Note: After use always replace the soldering pencil

1

into the holder.

Press the ON / OFF switch

2

into setting “0”.

If the device is not being used, pull the mains lead out of the mains

socket.

14 GB

Using the product

Q

Solder sponge

CAUTION! The hot soldering tip

7

must never be placed in

contact with a dry solder sponge

5

, otherwise the solder sponge

may be damaged.

The solder sponge

5

is used to clean soldering tips.

Moisten the solder sponge

5

before you use it.

Q

Soldering

If inhaled, vapours may cause headaches and fatigue as

well as other symptoms.

— The soldering pencil has a rated output of 48 watts and is therefore

ideal for electronics soldering (see Figs. A, B).

— The design of the soldering pencil makes it especially suitable for

use where access is diﬃcult or for ﬁne soldering work.

Clean the soldering tip

7

on the moist solder sponge

5

.

After cleaning the tip

7

it must be “tinned” (coated with solder).

This is done by melting solder on to the hot soldering tip

7

.

Guide the soldering tip

7

to the intended joint site and heat the joint.

Place the solder (with ﬂux) between the joint site and the tip

7

to melt it.

Continue to feed further solder until the whole joint has a covering

of solder.

Then quickly remove the soldering tip in order to avoid overheating

the molten solder.

Allow the solder to harden while not subjecting it to vibration or

movement.

Note: The ﬂux is either already contained in the solder or applied

separately.

… / Maintenance and cleaning / Service centre

15 GB

Using the product

… / Maintenance and cleaning / Service centre

Ask the advice of the retailer when buying solder in order to choose

the most suitable solder for your intended purpose.

Attachments and applications:

ATTENTION! Do not carry out any special changes or repairs to the

electrics or other parts. Exceptions are permitted if the person carrying

out such changes or repairs is qualiﬁed or trained to do so.

Try every application out on surplus material and see if you get the eﬀect

you wish to have. This means you will avoid damaging the item you

wish to work on.

Q

Maintenance and cleaning

RISK OF INJURY! Before you carry out any work

on the device always pull the mains plug out of the mains socket and

allow the device to cool.

Clean the device after you have ﬁnished using it.

Use a cloth and a little mild detergent for cleaning the device.

In no circumstances use sharp objects, or petrol, solvents or clean-

ing agents that might attack plastic.

Do not allow any liquids to enter the inside of the device.

Q

Service centre

Have your device repaired only by

qualified specialist personnel using original manufactur

er

parts only. This will ensure that your device remains safe to use.

If the plug or mains lead needs to be

replaced, always have the replacement carried out

16 GB

Service centre / Warranty

by the manufacturer or his service centre. This will ensure

that your device remains safe to use.

Note: Spare parts not listed (e.g. carbon brushes, switches) can be

ordered through our call centre.

Q

Warranty

The warranty for this appliance is for 3 years from the

date of purchase. The appliance has been manufactured

with care and meticulously examined before delivery.

Please retain your receipt as proof of purchase. In the

event of a warranty claim, please make contact by tele-

phone with our Service Department. Only in this way can

a post-free despatch for your goods be assured.

The warranty covers only claims for material and maufacturing defects,

but not for transport damage, for wearing parts or for damage to frag-

ile components, e.g. buttons or batteries. This product is for private use

only and is not intended for commercial use.

The warranty is void in the case of abusive and improper handling, use

of force and internal tampering not carried out by our authorized ser-

vice branch. Your statutory rights are not restricted in any way by this

warranty.

The warranty period will not be extended by repairs made unter war-

ranty. This applies also to replaced and repaired parts. Any damage

and defects extant on purchase must be reported immediately after un-

packing the appliance, at the latest, two days after the purchase date.

Warranty / Disposal

17 GB

Service centre / Warranty

Warranty / Disposal

Repairs made after the expiration of the warranty period are subject to

payment.

GB

Service Great Britain

Tel.: 0871 5000 720

(0.10 GBP/Min.)

e-mail: kom[email protected]

IAN 102652

Q

Disposal

The packaging is wholly composed of environmentally-

friendly materials that can be disposed of at a local

recycling centre.

Do not dispose of electrical devices

with the household rubbish!

In accordance with European Directive 2012 / 19 / EU (covering waste

electrical and electronic equipment) and its transposition into national

legislation, worn out electrical devices must be collected separately and

taken for environmentally compatible recycling.

Contact your local refuse disposal authority for more details of how to

dispose of your worn-out devices.

18 GB

Translation of the original declaration of conformity / …

Translation of the original declaration of

conformity / Manufacturer

We, KOMPERNASS HANDELS GMBH, the person responsible for

documents: Mr Semi Uguzlu, BURG STRASSE 21, 44867 BOCHUM,

GERMANY, hereby declare that this product complies with the follow-

ing standards, normative documents and EU directives:

EU Low Voltage Directive

(2006 / 95 / EC)

Electromagnetic Compatibility

(2004 / 108 / EC)

RoHS Directive

(2011 / 65 / EU)

Applicable harmonized standards

EN 60335-2-45/A2:2012

EN 60335-1:2012

EN 62233:2008

EN 55014-1/A2:2001

EN 55014-2/A2:2008

EN 61000-3-2/A2:2009

EN 61000-3-3:2013

Type / Machine designation:

Soldering station PLS 48 B1

Date of manufacture (DOM): 07–2014

Serial number: IAN 102652

19 GB

Translation of the original declaration of conformity / …

Bochum, 31.07.2014

Semi Uguzlu

- Quality Manager -

We reserve the right to make technical modiﬁcations in the course of

further development.

Translation of the original declaration of conformity / …

20

Spis zawartości

Strona jest ładowana ...

Parkside PLS 48 B1 Operation and Safety Notes

Parkside PLS 48 B1 Operation and Safety Notes

w innych językach

Powiązane dokumenty

Inne dokumenty