Perel SOL50F Instrukcja obsługi

Marka: Perel

Model: SOL50F

Typ: Instrukcja obsługi

Ten podręcznik jest również odpowiedni dla

SOL50F/SOL100F

SOL50F

SOL100F

USER MANUAL 3

HANDLEIDING 7

MODE D'EMPLOI 11

MANUAL DEL USUARIO 15

BEDIENUNGSANLEITUNG 19

INSTRUKCJA OBSŁUGI 23

MANUAL DO UTILIZADOR 27

SOL50F/SOL100F

V. 01 – 27/04/2018 2 ©Velleman nv

SOL50F/SOL100F

V. 01 – 27/04/2018 3 ©Velleman nv

USER MANUAL

1. Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its lifecycle

could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal

waste; it should be taken to a specialized company for recycling. This device should be

returned to your distributor or to a local recycling service. Respect the local environmental

rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Perel! Please read the manual thoroughly before bringing this device

into service. If the device was damaged in transit, do not install or use it and contact your

dealer.

2. Safety Instructions

Read and understand this manual and all safety signs before using this appliance.

Caution, risk of electric shock.

Photovoltaic modules generate DC current when exposed to sunlight or other light sources.

Although a single module produces only low voltage and current, shocks and burns are still a

potential hazard. The shock hazard increases as modules are connected in series. Cover the

whole front of the module with a dense opaque material such as cardboard when installing and

handling the module. Work under dry conditions only.

Make sure you fully understand the instructions before installing the module. Contact a

qualified technician if in doubt.

This device can be used by children aged from 8 years and above, and persons with reduced

physical, sensory or mental capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning the use of the device in a safe way and understand

the hazards involved. Children shall not play with the device. Cleaning and user maintenance

shall not be made by children without supervision.

Never disconnect a module under load.

Install the module horizontally or vertically with the connection box at the top. The solar

module should be facing south at an angle of 0-20°. Bear in mind that if the solar module is

cast in shadow, its power output will drop considerably. Choose a location for the module with

as little shade as possible.

Do not use sharp metal tools or any other tools that can scratch the surface of the module.

3. General Guidelines

Refer to the Velleman® Service and Quality Warranty on the last pages of this manual.

All modifications of the device are forbidden for safety reasons. Damage caused by user

modifications to the device is not covered by the warranty.

SOL50F/SOL100F

V. 01 – 27/04/2018 4 ©Velleman nv

Only use the device for its intended purpose. Using the device in an unauthorised way will void

the warranty.

Damage caused by disregard of certain guidelines in this manual is not covered by the

warranty and the dealer will not accept responsibility for any ensuing defects or problems.

Nor Velleman nv nor its dealers can be held responsible for any damage (extraordinary,

incidental or indirect) – of any nature (financial, physical…) arising from the possession, use or

failure of this product.

Keep this manual for future reference.

4. Connection

4.1 Tips

 Use suitable connection cables – preferably UV-resistant cables with section 2.5-4 mm² –

depending on the length of the cables and the size of the panel. We recommend using the

Velleman SOL/SPC3 cables (not included).

 Connect the negative pole of the panel to the negative pole of the charge controller (not

included). Similarly, connect the positive pole of the panel to the positive pole of the

charge controller.

4.2 General

 Coat the wires and terminal posts with Vaseline® to protect them from corrosion.

 Make sure the connection box is tightly closed to prevent moisture from entering.

 If the solar module is to be mounted in a coastal area, it is extra important to protect the

installation from moisture to prevent saltwater corrosion.

4.3 Schemes

Single-Panel Connection

The solar module should be connected to a battery system via a charge controller.

SOL50F/SOL100F

V. 01 – 27/04/2018 5 ©Velleman nv

Parallel Connection

Connect your solar modules in parallel by connecting the positive to positive and the negative

to negative.

Series Connection

Connect your solar modules in series by connecting the positive of one module to the negative

of the next module.

5. Cleaning and Maintenance

This appliance does not require excessive maintenance.

Keep the appliance clean. In a marine environment, rinse often with fresh water to avoid salt

build-up.

Periodically check electrical connections and wires.

Periodically check mounting and securing.

SOL50F/SOL100F

V. 01 – 27/04/2018 6 ©Velleman nv

6. Technical Specifications

SOL50F

maximum power (Pmax) ........................................................................................... 50 W

voltage at Pmax (Vmp) ............................................................................................ 17.6 V

current at Pmax (Imp) ............................................................................................ 2.86 A

open-circuit voltage (Voc) ........................................................................................ 21.1 V

short-circuit current (Isc)......................................................................................... 3.15 A

temperature coefficient of Voc ............................................................ (0.065 ± 0.015) %/°C

temperature coefficient of Isc ............................................................... -(80 ± 10) mV %/°C

temperature coefficient of power ............................................................ -(0.5 ± 0.05) %/°C

NOCT ............................................................................................................... 47 ± 2 °C

operating temperature ............................................................................. -40 °C to +85 °C

maximum system voltage ..................................................................................... 600 VDC

power tolerance ...................................................................................................... ± 5 %

cells .................................................................................. multi-crystalline silicon solar cell

number of cells and connections .......................................................................... 32 (4 x 8)

module dimensions ..................................................................... 645 x 535 x 3 mm (0.12")

weight .................................................................................................... 1.6 kg (3.56 lbs.)

SOL100F

maximum power (Pmax) ......................................................................................... 100 W

voltage at Pmax (Vmp) ............................................................................................ 17.6 V

current at Pmax (Imp) ............................................................................................ 5.72 A

open-circuit voltage (Voc) ........................................................................................ 21.1 V

short-circuit current (Isc)......................................................................................... 6.30 A