Sony KP-41PX1K Instrukcja obsługi

Kategoria
Telewizory LCD
Typ
Instrukcja obsługi
R
Instruction Manual
KP-41PX1K
© 2001 by Sony Corporation
GB
Návod k obsluze
CZ
Instrukcja obs
ł
ugi
HU
Kezelési útmutató
PL
Projection TV
4-206-027-
31
(1)
01COVERK.fm Page 1 Friday, June 8, 2001 4:04 PM
3
GB
Thank you for choosing this Sony projection TV.
Before operating the projection TV, please read this manual thoroughly and retain
it for future reference.
Reading and Understanding this Instruction Manual:
Use
Getting Started
if you wish to install the projection TV set and to get familiar
with the basic functions.
Use
Advanced Operati
if you wish to know more about the additional features
of the projection TV set.
Symbols used in the manual:
I
nforms you of possible hazards.
Important information.
Information on a feature.
1,2...
Sequence of instructions.
Shaded buttons on the remote control show the buttons you have to press
to follow the sequence of instructions.
Informs you of the result of the instructions.
The process continues on the next page to get final result.
MENU
K
Instruction Manual
Projection TV
01GBK.fm Page 3 Tuesday, October 23, 2001 5:03 PM
4
Safety Information
Additional Safety Information
After transporting the projection TV directly from a cold to a warm location, or if the room temperature has changed suddenly,
pictures may be blurred or show poor colour over portions of the picture. This is because moisture has condensed on the mirrors
or lenses inside the projection TV. Let the moisture evaporate before using the projection TV.
To obtain a clear picture, do not expose the screen to direct illumination or direct sunlight. If possible, use spot lighting directed
down from the ceiling.
Displaying a still picture for long periods of time, for instance, when operating a video game or personal computer and viewing a
programme in 16:9 mode, may damage the picture tube. To avoid this, keep the picture contrast level low.
Avoid touching the screen, and take care not to scratch the surface with hard objects.
Do not open the cabinet and the rear
cover of the TV. Refer to qualified
service personnel only.
To prevent fire or shock hazard,
do not expose the TV to rain or
moisture.
For your own safety, do not touch
any part of the TV, power lead or
aerial lead during lightning storms.
Do not cover the
ventilation openings of the TV For
ventilation, leave a space of at least
10cm all around the set.
Never place the TV in hot, humid or
excessively dusty places. Do not
install the TV where it may be
exposed to mechanical vibrations.
To prevent fire, keep inflammable
objects or naked lights (eg candles)
away from the TV.
Clean the TV with a soft, lightly
dampened cloth. Do not use
benzine, thinner or any other
chemicals to clean the TV. Do not
scratch the TV screen. As a safety
precaution, unplug the TV before
cleaning it.
Pull out the power lead by the
plug. Do not pull on the power
lead itself.
Take care not to place heavy
objects on the power lead as this
could result in damage.
We recommend you wind any
excess lead around the holders
provided on the rear of the TV.
Place the TV on a secure stable
stand. Do not allow children to
climb on to it. Do not place the TV
on its side or face up.
Do not cover the ventilation
openings of the TV with items
such as curtains or newspapers
etc.
Never push objects of any kind into
the set as this could result in a fire or
electric shock. Never spill liquid of
any kind on the set. If any liquid or
solid object does fall through, do not
operate the TV. Have it checked
immediately by qualified personnel.
For environmental and safety
reasons, it is recommended that the
TV set is not left in standby mode
when not in use. Disconnect from
the mains.
This set is to operate on a 220-240V
AC supply only. Take care not to
connect too many appliances to the
same power socket as this could
result in fire or electric shock.
Unplug the power lead before
moving the TV. Avoid uneven
surfaces, quick steps or excessive
force. If the set has been dropped or
damaged, have it checked
immediately by qualified service
personnel.
Safety Information
01GBK.fm Page 4 Tuesday, October 23, 2001 5:03 PM
5
GB
Table of Content
Table of Contents
Table of Contents
Keys to read this Instruction Manual ............................................................................................3
For your Safety..................................................................................................................................4
Getting Started
Overview
Checking the Accessories Supplied...................................................................................6
Overview of TV Buttons......................................................................................................6
Overview of Remote Control Buttons...............................................................................7
Installation
Inserting Batteries into the Remote Control.....................................................................8
Connecting the Aerial and VCR.........................................................................................8
Switching on the projection TV..........................................................................................8
First Time Operation
S
electing Language...............................................................................................................9
Automatically Tuning the TV using the Remote Control ............................................10
Changing the Programme Order of the TV channel.....................................................11
Adjusting colour Registration (Convergence) ...............................................................12
On Screen display Menus Guide .....................................................................................13
Advanced Operation
Advanced Presetting
Automatically Tuning the TV ..........................................................................................14
Manually Tuning the TV...................................................................................................15
Using the “Further Programme Preset” function..........................................................16
Locking Programmes.........................................................................................................17
Skipping Programme positions........................................................................................18
Labelling a channel ............................................................................................................19
Advanced TV Operation
Adjusting the Picture.........................................................................................................20
Changing the screen mode ...............................................................................................21
Adjusting the Sound ..........................................................................................................22
Using the Sleep Timer........................................................................................................24
Teletext
Viewing Teletext.................................................................................................................25
Optional Connections
Connecting Optional Equipment.....................................................................................26
Using Optional Equipment...............................................................................................27
Smartlink .............................................................................................................................28
Remote Control of other Sony Equipment .....................................................................28
Selecting the output source for the Euro AV connectors .............................................29
Using the “AV Label Preset” function ............................................................................30
Additional Information
Optimum Viewing Area....................................................................................................31
Specifications ......................................................................................................................32
Troubleshooting .................................................................................................................33
01GBK.fm Page 5 Tuesday, October 23, 2001 5:03 PM
6
One Remote Control
(RM-892)
Checking the Accessories Supplied
Getting Started - Push up
Two batteries (R6 type)
Push up the flap on the
front of the projection TV
to reveal the front panel.
Headphone
jack
S Video
Input
jack
Auto
Convergence
button
Auto
Start up
button
Audio
Input
jacks
Selecting
input
source
Volume
control
buttons
Programme
up or down
buttons
(selects TV
channels)
Standby
indicator
On/Off
Switch
Video
Input
jack
Getting Started - Overview
Checking the Accessories Supplied
Overview of Projection TV Buttons
S
RM
892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO TV
01GBK.fm Page 6 Tuesday, October 23, 2001 5:03 PM
7
GB
S
RM
892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
K
VIDEO TV
VIDEO TV
VTR 1 2 3 4 DVD
CH
This button does not work on this set.
Muting the Sound
Press to mute TV sound.
Press again to restore the sound.
VCR on/off
Press to switch your VCR on or off.
Selecting TV mode
Press to switch off Teletext or video input.
Selecting Teletext
Press to switch on Teletext.
These buttons do not work on this set.
Selecting channels
Press to select channels.
For double-digit programme numbers, e.g.
23, press -/-- first, then the buttons 2 and 3.
If you enter an incorrect first digit, this
should be corrected by entering another digit
(0-9) and then selecting -/-- button again to
enter the programme number of your choice.
Selecting Sound mode
Press repeatedly to change the sound mode.
Selecting Picture mode
Press repeatedly to change the picture mode.
Adjusting TV Volume
Press to adjust the volume of the TV.
Checking the Accessories Supplied
Getting Started - Overview
Getting Started - Overview
Overview of Remote Control Buttons
Displaying the time
Press to switch the time on or off
(available only when teletext is
broadcast).
VCR operation
For more details, please refer to the
section "Remote Control of other
Sony Equipment".
Besides TV functions, all coloured buttons as well as green
symbols are also used for Teletext operation. For more details,
please refer to the "Teletext" section of this instruction manual.
To Temporarily Switch Off projection
TV
Press to temporarily switch off TV (the
standby indicator
on the set lights up in
red). Press again to switch on TV from
standby mode.
To save energy we recommend switching off
completely when TV is not in use.
After 15-30 minutes without a signal
and without any button being pressed,
the set switches automatically into
standby mode.
Displaying On Screen Information
Press to display all on-screen indications.
Press again to cancel.
Selecting Input source
Press repeatedly until the desired input
symbol of the source appears on the screen.
Back to the channel last watched
Press to watch the last channel selected
(watched for at least 5 seconds).
Selecting Screen format
Press repeteadly to change the format of
the screen (for more details, please refer to
the section “Changing the Screen format”).
This button only works in Teletext mode.
Function
associated to this button does not
work with this set.
Joystick for menu selection
4
Scroll Up
$
Scroll Down
Z
Previous menu or selection
z
Next menu or selection
OK
Confirms your selection
Selecting channels
Press to select the next or previous channel.
Displaying the menu system
Press to display the menu on the screen.
Press again to remove the menu display
from the screen.
01GBK.fm Page 7 Tuesday, October 23, 2001 5:03 PM
8
Getting Started - Installation
Make sure you insert the batteries using the correct polarities.
Always remember to dispose of used batteries in an environmental friendly way.
Inserting Batteries into the Remote Control
Getting Started - Installation
Connecting the Aerial and VCR
Switching on the projection TV
Connect the projection
TV plug to the
mains socket (220-
240V AC, 50Hz).
Push in the
On/Off
switch on the front of the
projection TV.
The Scart lead is optional.
If you use this optional connection it can improve picture and sound quality when using a VCR.
If you do not use a SCART lead, after automatically tuning the projection TV refer to the “Manually Tuning the TV” section
of this instruction manual, to the tune in the set to the ouput of you VCR. Also refer to your VCR instruction manual to
find out how to find the output channel of your VCR.
or
OUT IN
VCR
01GBK.fm Page 8 Tuesday, October 23, 2001 5:03 PM
9
GB
LANGUAGE
Select Language:
Confirm: OK
English
Deutsch
Français
Česki
Polski
Italiano
Nederlands
Magyar
Getting Started - First Time Operation
Use this function to change the language of the menu screens.
The first time that you switch on your projection TV, the Language menu appears automatically.
However, if you need to change the language menu afterwards, select the menu Language in the (PRESET) menu and
proceed in the same way as described below.
Selecting Language
1
Press the
on/off
button on your projection TV set to switch on your
TV. The first time you press the on/off button on your TV set, the
language menu displays automatically on the TV screen.
2
Push the joystick on the remote control
$
or
4
to select the language,
then press
OK
to confirm your selection.
The Auto Tuning menu appears on the projection TV screen in the selected
language.
Getting Started - First Time Operation
S
RM
892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO TV
Do you want to start
automatic tuning?
Yes
No
Confirm: OK
LANGUAGE
Select Language:
Confirm: OK
English
Deutsch
Français
Česki
Polski
Italiano
Nederlands
Magyar
LANGUAGE
Select Language:
Confirm: OK
English
Deutsch
Français
Česki
Polski
Italiano
Nederlands
Magyar
01GBK.fm Page 9 Tuesday, October 23, 2001 5:03 PM
10
1
Press the
OK
button on the remote control to select
YES
. A new menu
appears automatically on the screen asking you to check that the
antenna is connected.
2
Confirm that the antenna is connected and then press the
OK
button.
The automatic tuning starts and the message "AUTO
PROGRAMME" flashes on the screen.
This procedure could take some minutes. Please, be patient and
do not press any button, otherwise the automatic tuning will
not be completed.
When the automatic tuning is finished, the Programme Sorting menu
appears on the screen.
Notes:
• To stop the automatic tuning, press the MENU button.
• If you stop the automatic tuning by pressing the MENU
button, the Programme Sorting menu does not appear
automatically on the screen.
Getting Started - First Time Operation
You need to tune the set to receive channels (TV Broadcast). By following the instructions below, this projection TV
automatically searches and stores all available channels for you.
After having selected the language, a new menu appears automatically on the projection TV screen asking you to
automatically tune the TV. However, if you need to change or repeat the tuning afterwards (e.g. when you move house), select
the menu Auto Programme in the (PRESET) menu and proceed in the same way as described below or, please refer to the
section "Automatically Tuning the TV" of this instruction manual.
Automatically Tuning the TV using the Remote Control
Getting Started - First Time Operation
Do you want to start
automatic tuning?
Yes
No
Confirm: OK
PRO
G
1
AUT
O
PROG SYS CHAN LABEL
PROGRAMME SORTING
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
0
1
2
3
4
5
6
7
8
9
BBC-W
MV-CH
TVE-1
TVE-2
ANT-3
TELE 5
C PLUS
- - - - -
- - - - -
CNN -
C 28
C 40
C 41
C 31
C 34
C 27
C 47
C 44
C 23
C 35
Select PROG: + OK
Exit: MENU
PROG
1
AUTO PROGRAMME
AUTO PROGRAMME
SYS
B/G
CH
C 26
LABEL
- - - - -
Please confirm that
antenna is connected
Confirm: OK
S
RM
892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO TV
01GBK.fm Page 10 Tuesday, October 23, 2001 5:03 PM
11
GB
Getting Started - First Time Operation
After all available channels (TV Broadcast) are captioned and stored, a new menu appears automatically on the screen to
change the order in which the channels appear on the screen.
However, if you wish to rearrange the order of the channels afterwards, select the menu Programme Sorting in the
(PRESET) menu and proceed in the same way as described in the b) section of this chapter.
a) If you do not wish to change the channel order:
Changing the Programme Order of the TV channels
1
Press the
MENU
button on the remote control to exit and return to the
normal TV screen.
When the automatic tuning is finished, the Programme Sorting menu
appears on the screen.
b) If you wish to change the channel order:
1
Push the joystick on the remote control to $ or 4 to select the
programme number with the channel (TV Broadcast) you wish to
rearrange, then press OK.
2 Push the joystick to $ or 4 to select the new programme number
position for your selected channel (TV Broadcast), then press OK.
The selected channel now moves to its new programme position
and the other channels move accordingly.
3 Repeat steps 1 and 2 if you wish to change the order of the other
channels.
4 Press the MENU button to exit and return to the normal TV screen.
Your projection TV is now ready for use.
Getting Started - First Time Operation
PROG SYS CHAN LABEL
PROGRAMME SORTING
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
0
1
2
3
4
5
6
7
8
9
BBC-W
MV-CH
TVE-1
TVE-2
ANT-3
TELE 5
C PLUS
- - - - -
- - - - -
CNN -
C 28
C 40
C 41
C 31
C 34
C 27
C 47
C 44
C 23
C 35
Select PROG: + OK
Exit: MENU
PROG SYS CHAN LABEL
PROGRAMME SORTING
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
0
1
2
3
4
5
6
7
8
9
BBC-W
MV-CH
TVE-1
TVE-2
ANT-3
TELE 5
C PLUS
- - - - -
- - - - -
CNN -
C 28
C 40
C 41
C 31
C 34
C 27
C 47
C 44
C 23
C 35
Select PROG: + OK
Exit: MENU
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
0
1
2
3
4
5
6
7
8
9
MV-CH
TVE-1
TVE-2
ANT-3
TELE 5
C PLUS
- - - - -
- - - - -
CNN -
BBC-W
C 40
C 41
C 31
C 34
C 27
C 47
C 44
C 23
C 35
C 28
PROGRAMME SORTING
Select Position:
Confirm: OK
SYS CHAN LABELPROG
S
RM
892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO TV
01GBK.fm Page 11 Tuesday, October 23, 2001 5:03 PM
12
Getting Started - First Time Operation
Due to the earth’s magnetism, the picture might become undefined and you could see different colours on the outlines of the
images. In that case, proceed as follows:
Adjusting Colour Registration (Convergence)
Auto converge the Red, Green, and Blue
Lines
1
Push up the flap on the front of the projection TV to reveal the front
control panel.
2 Press button on the projection TV.
The Auto Convergence function works for about 30 seconds. When the white
cross disappears from the screen, your projection TV is ready for use.
Notes:
The Auto Convergence function does not work:
• when no signal is input.
• when the input signal is weak.
• when the screen is exposed to spotlights or direct sunlight.
• when you watch the teletext broadcast.
If you wish a more accurate
convergence adjustment
1
Press the MENU button on the remote control to display the menu on
the screen.
2 Push the joystick to $ to select the symbol , then push to z to enter
to the PRESET menu.
3 Push the joystick to $ or 4 or 4 to select Convergence, then push to z.
4 Push the joystick to $ or 4 to select “the line” (vertical and horizontal
lines in red and blue) you want to adjust.
: red vertical line (left/right adjustment)
: red horizonta line (up/down adjustment)
: blue vertical line (left/right adjustment)
: blue horizontal line (up/down adjustment)
Then press the OK button.
5 Push the joystick repeatedly to $ , 4 , Z or z to converge the selected
line with the green line in the centre, then press OK to confirm.
6 Repeat steps 4 and 5 to adjust the other lines, until all the lines have
overlapped to form a white cross.
7 Press the MENU button to exit and return to the normal TV screen.
Your projection TV is ready for use.
Your projection TV is ready for use.
PICTURE CONTROL
Personal
4:3
Picture Mode
Contrast
Reset
Format
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
S
RM
892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO TV
Getting Started - First Time Operation
01GBK.fm Page 12 Tuesday, October 23, 2001 5:03 PM
13
GB
Getting Started - First Time Operation
Adjusting Colour Registration (Convergence)
PICTURE CONTROL
Personal
4:3
Picture Mode
Contrast
Reset
Format
SOUND CONTROL
Personal
Off
Mono
0
Mono
Main
Sound Mode
Balance
Reset
Dolby Virtual
Dual Sound
Volume Offset
Volume
Dual Sound
Speaker
VIDEO CONNECTION
[TV - - - - - - -]
[AV1 - - - - - - -]
TV Screen
Output
TV
AV1
TIMER
1:00
Sleep Timer
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
Do you want to start
automatic tuning?
Yes
No
Confirm: OK
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
0
1
2
3
4
5
6
7
8
9
PROG SYS CHAN
MV-CH
TVE-1
TVE-2
ANT-3
TELE 5
C PLUS
- - - - -
- - - - -
CNN -
BBC-W
LABEL
C 40
C 41
C 31
C 34
C 27
C 47
C 44
C 23
C 35
C 28
MANUAL PROGRAMME PRESET
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
Off
Off
AV1
Off
AV2
Off
Off
Off
Off
Off
On
On
On
On
On
On
On
On
On
On
0
1
2
3
4
5
6
7
8
9
PROG AFT DECODER
FURTHER PROGRAMME PRESET
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
PROG SYS CHAN LABEL
PROGRAMME SORTING
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
0
1
2
3
4
5
6
7
8
9
BBC-W
MV-CH
TVE-1
TVE-2
ANT-3
TELE 5
C PLUS
- - - - -
- - - - -
CNN -
C 28
C 40
C 41
C 31
C 34
C 27
C 47
C 44
C 23
C 35
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
AV LABEL PRESET
AV1
RGB
AV2
YC2
AV3
INPUT LABEL
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
0
1
2
3
4
5
6
7
8
9
PROG
MV-CH
TVE-1
TVE-2
ANT-3
TELE 5
C PLUS
- - - - -
- - - - -
CNN -
- - - - -
C 40
C 41
C 31
C 34
C 27
C 47
C 44
C 23
C 35
C 28
SYS CHAN LABEL
PARENTAL LOCK
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
LANGUAGE
English
Deutsch
Français
Česki
Polski
Italiano
Nederlands
Magyar
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
(For different adjustments, please refer to
the section "Adjusting the Picture")
(For different adjustments, please refer to
the section "Adjusting the Sound")
(For more details, please refer to the
section "Selecting the output source for the
Euro AV connectors")
(For more details, please refer to the
section "Using the Sleep Timer")
(For more details, please refer to the
section "Automatically Tuning the TV
using the Remote Control")
(For more details, please refer to the
section "Manually Tuning the TV")
(For more details, please refer to the
section "Using the Further Programme
Preset function")
(For more details, please refer to the
section "Using the AV Label Preset
function")
(For more details, please refer to the
section "Changing the Programme
Order of the TV channels")
(For more details, please refer to the
section "Locking Programmes")
(For more details, please refer to the
section "Selecting Language")
(For more details, please refer to the
section "Adjusting Colour Registration
Convergence)"
Press the MENU button on the remote control to display the menu on the screen.
MENU
Getting Started - First Time Operation
PICTURE CONTROL
Personal
4:3
Picture Mode
Contrast
Reset
Format
SOUND CONTROL
Personal
Off
Mono
0
Mono
Main
Sound Mode
Balance
Reset
Dolby Virtual
Dual Sound
Volume Offset
Volume
Dual Sound
Speaker
VIDEO CONNECTION
[TV - - - - - - -]
[AV1 - - - - - - -]
TV Screen
Output
TV
AV1
TIMER
Off
Sleep Timer
01GBK.fm Page 13 Tuesday, October 23, 2001 5:03 PM
14
Advanced Operation - Advanced Presetting
Besides the explanation in the section “Automatically Tuning the TV using the Remote Control“, by following the
instructions below, this projection TV also searches and stores automatically all available channels using just one button of
the projection TV set and one button of the remote control.
Automatically Tuning the TV
1 Push up the flap on the front of the projection TV to reveal the front
control panel.
2 Press and hold in the button on the TV set for some seconds, until
a menu appears automatically on the screen asking you to check that
antenna is connected.
3 Confirm that the antenna is connected and then press the OK button
on the remote control.
The automatic tuning starts and the message "AUTO
PROGRAMME" flashes on the screen.
This procedure could take some minutes. Please, be patient and
do not press any button, otherwise the automatic tuning will not
be completed.
When the automatic tuning procedure is complete, the Programme
Sorting menu appears on the screen:
If you do not wish to change the channel order, press the MENU
button on the remote control to exit and return to the normal TV
screen.
If you wish to change the channel order, proceed in the same way as
described in the chapter "Changing the Programme Order of the TV
channels", section b).
Note: To stop the automatic tuning, press the MENU button on the
remote control.
Advanced Operation - Advanced Presetting
S
RM
892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO TV
Please confirm that
antenna is connected
Confirm: OK
Please confirm that
antenna is connected
Confirm: OK
PROG
1
AUTO PROGRAMME
AUTO PROGRAMME
SYS
B/G
CH
C 26
LABEL
- - - - -
01GBK.fm Page 14 Tuesday, October 23, 2001 5:03 PM
15
GB
1 Press the MENU button on the remote control to display the
menu on the screen.
2 Push the joystick to $ to select the symbol, then push to z to
enter to the PRESET menu.
3
Push the joystick to $ or 4 to select Manual Programme Preset,
then push to z .
4
Push the joystick to $ or 4 to select on which programme number
you want to preset a channel, then push to z.
5
Push the joystick to $ or 4 to select the TV Broadcast system (B/G
for western european countries or D/K for eastern european
countries) or a video input source (AV1, AV2...), then push to z.
6 Push the joystick to $ or 4 to select the channel tuning, "C" for
terrestrial channels or "S" for cable channels, then push to z.
7
Press the number buttons to enter the channel number of the TV
Broadcast or push the joystick to 4 or $ to search for the next
available channel.
If you do not wish to store this channel, push the joystick to 4 or $
to continue searching for the desired channel.
8 If this is the desired channel you wish to store, press the OK button.
9 Repeat steps 4 to 8 if you wish to store more channels.
10 Press the MENU button to exit and return to the normal TV screen.
Your projection TV is now ready for use.
Advanced Operation - Advanced Presetting
Use this function to preset channels or a video input source one by one to the programme order of your choice.
Manually Tuning the TV
Advanced Operation - Advanced Presetting
PICTURE CONTROL
Personal
4:3
Picture Mode
Contrast
Reset
Format
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
0
1
2
3
4
5
6
7
8
9
PROG SYS CHAN
MV-CH
TVE-1
TVE-2
ANT-3
TELE 5
C PLUS
- - - - -
- - - - -
CNN -
BBC-W
LABEL
C 40
C 41
C 31
C 34
C 27
C 47
C 44
C 23
C 35
C 28
MANUAL PROGRAMME PRESET
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
0
1
2
3
4
5
6
7
8
9
PROG SYS CHAN
MV-CH
TVE-1
TVE-2
ANT-3
TELE 5
C PLUS
- - - - -
- - - - -
CNN -
BBC-W
LABEL
C 40
C 41
C 31
C 34
C 27
C 47
C 44
C 23
C 35
C 28
MANUAL PROGRAMME PRESET
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
0
1
2
3
4
5
6
7
8
9
PROG SYS CHAN
MV-CH
TVE-1
TVE-2
ANT-3
TELE 5
C PLUS
- - - - -
- - - - -
CNN -
BBC-W
LABEL
C 40
C 41
C 31
C 34
C 27
C 47
C 44
C 23
C 35
C 28
MANUAL PROGRAMME PRESET
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
0
1
2
3
4
5
6
7
8
9
PROG SYS CHAN
MV-CH
TVE-1
TVE-2
ANT-3
TELE 5
C PLUS
- - - - -
- - - - -
CNN -
BBC-W
LABEL
C 40
C 41
C 31
C 34
C 27
C 47
C 44
C 23
C 35
C 28
MANUAL PROGRAMME PRESET
S
RM
892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO TV
01GBK.fm Page 15 Tuesday, October 23, 2001 5:03 PM
16
1 Press the MENU button on the remote control to display the menu on
the screen.
2 Push the joystick to $ to select the symbol, then push to z to enter
to the PRESET menu.
3 Push the joystick to $ or 4 to select Further Programme Preset, then
push to z .
4 Push the joystick to $ or 4 to select the relevant programme number,
then push to z repeatedly to select:
a) AFT or
b) DECODER.
The selected item changes colour.
5 a) AFT
Push the joystick to $ or 4 to fine tune the channel frequency over a
range of -15 to +15, then press the OK button.
Repeat steps 4 and 5a) if you wish to fine tune other channels.
b) DECODER
Push the joystick to $ or 4 to select AV3 and press the OK.
The picture from the decoder connected to the Euro AV :3 on
the back of the projection TV will appear on this programme
number.
Repeat steps 4 and 5b) to preset the AV3 output for other
programme positions.
6 Press the MENU button to exit and return to the normal TV screen.
Your projection TV is now ready for use.
Advanced Operation - Advanced Presetting
With this feature you can:
a) Even normally the automatic fine tuning (AFT) is operating, however you can manually fine-tune the TV to obtain a
better picture reception if the picture is distorted or
b) preset the AV3 output for the programme positions of channels with scrambled signals (eg from a pay TV decoder). In
this way a connected VCR records the unscrambled signal.
Using the "Further Programme Preset" function
Advanced Operation - Advanced Presetting
PICTURE CONTROL
Personal
4:3
Picture Mode
Contrast
Reset
Format
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
S
RM
892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO TV
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
Off
Off
AV1
Off
AV2
Off
Off
Off
Off
Off
On
On
On
On
On
On
On
On
On
On
0
1
2
3
4
5
6
7
8
9
PROG AFT DECODER
FURTHER PROGRAMME PRESET
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
2
On
On
On
On
On
On
On
On
On
0
1
2
3
4
5
6
7
8
9
PROG AFT DECODER
FURTHER PROGRAMME PRESET
AV3
Off
Off
Off
Off
Off
Off
Off
Off
Off
On
On
On
On
On
On
On
On
On
On
0
1
2
3
4
5
6
7
8
9
PROG AFT DECODER
FURTHER PROGRAMME PRESET
01GBK.fm Page 16 Tuesday, October 23, 2001 5:03 PM
17
GB
1 Press the MENU button on the remote control to display the menu on
the screen.
2 Push the joystick to $ to select the symbol, then push to z to enter
to the PRESET menu.
3 Push the joystick to $ or 4 to select Parental Lock, then push to z .
4 Push the joystick to $ or 4 to select the programme number with the
channel you wish to block, then press the OK button.
The symbol appears before the programme position to indicate
this programme is now blocked.
To unblock the programme, press the OK button again. The
symbol disappears.
5 Repeat step 4 if you wish to block other channels.
6 Press the MENU button to exit and return to the normal TV screen.
When you select a blocked programme the screen appears in black, with
symbol.
Advanced Operation - Advanced Presetting
This feature enables you to prevent undesirable broadcasts appearing on the screen. We suggest you use this function to
prevent children from watching programmes you consider unsuitable.
Locking Programmes
Advanced Operation - Advanced Presetting
PICTURE CONTROL
Personal
4:3
Picture Mode
Contrast
Reset
Format
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
0
1
2
3
4
5
6
7
8
9
PROG
MV-CH
TVE-1
TVE-2
ANT-3
TELE 5
C PLUS
- - - - -
- - - - -
CNN -
- - - - -
C 40
C 41
C 31
C 34
C 27
C 47
C 44
C 23
C 35
C 28
SYS CHAN LABEL
PARENTAL LOCK
S
RM
892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO TV
01GBK.fm Page 17 Tuesday, October 23, 2001 5:03 PM
18
1 Press the MENU button on the remote control to display the menu on
the screen.
2 Push the joystick to $ to select the symbol, then push to z to enter
to the PRESET menu.
3 Push the joystick to $ or 4 to select Manual Programme Preset, then
push to z .
4 Push the joystick to $ or 4 to select the programme position you want
to skip, then push to z to enter to the SYS column.
5 Push the joystick to $ to select “- - -”, then press the OK button to
store.
6 Repeat steps 4 and 5 to skip other unused programme positions.
7 Press the MENU button to exit and return to the normal TV screen.
When changing channels (TV Broadcasts) with the PROGR +/- buttons,
the skipped programme positions do not appear. You can, however, still select
them using the number buttons.
Advanced Operation - Advanced Presetting
You can programme this projection TV to skip any unwanted programme numbers when they are selected with the PROGR
+/- buttons. To cancel this function afterwards, proceed in the same way as described below by selecting the appropriate
TV system (B/G or D/K) instead of "- - -" in step 5.
Skipping Programme positions
Advanced Operation - Advanced Presetting
PICTURE CONTROL
Personal
4:3
Picture Mode
Contrast
Reset
Format
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
S
RM
892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO TV
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
0
1
2
3
4
5
6
7
8
9
PROG SYS CHAN
MV-CH
TVE-1
TVE-2
ANT-3
TELE 5
C PLUS
- - - - -
- - - - -
CNN -
BBC-W
LABEL
C 40
C 41
C 31
C 34
C 27
C 47
C 44
C 23
C 35
C 28
MANUAL PROGRAMME PRESET
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
- - -
0
1
2
3
4
5
6
7
8
9
PROG SYS CHAN
MV-CH
TVE-1
TVE-2
ANT-3
TELE 5
C PLUS
- - - - -
- - - - -
CNN -
BBC-W
LABEL
C 40
C 41
C 31
C 34
C 27
C 47
C 44
C 23
C 35
C 28
MANUAL PROGRAMME PRESET
01GBK.fm Page 18 Tuesday, October 23, 2001 5:03 PM
19
GB
1 Press the MENU button on the remote control to display the menu on
the screen.
2 Push the joystick to $ to select the symbol, then push to z to enter
to the PRESET menu.
3 Push the joystick to $ or 4 to select Manual Programme Preset, then
push to z.
4 Push the joystick to $ or 4 to select the programme number with the
channel you wish to name.
5 Push the joystick to z repeatedly until the first element of the LABEL
column is highlighted.
6 Push the joystick to $ or 4 to select a letter or number (select “-” for
a blank), then push to z to confirm this character. Select the other four
characters in the same way.
7 After selecting all the characters, press the OK button.
8
Repeat steps 4 to 7 if you wish to label other channels.
9 Press the MENU button to exit and return to the normal TV screen.
When you select a named channel, the name appears for a few seconds on the
screen.
Advanced Operation - Advanced Presetting
Names for channels (TV Broadcasts) are usually taken automatically from Teletext if available. You can however name a
channel or an input video source using up to five characters (letters or numbers). Using this function, you can easily
identify which channel (TV Broadcasts) or video source you are watching.
Labelling a channel
Advanced Operation - Advanced Presetting
PICTURE CONTROL
Personal
4:3
Picture Mode
Contrast
Reset
Format
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
S
RM
892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO TV
Auto Programme
Manual Programme Preset
Further Programme Preset
AV Label Preset
Programme Sorting
Parental Lock
Language
Convergence
PRESET
PROG SYS CHAN LABEL
MANUAL PROGRAMME PRESET
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
0
1
2
3
4
5
6
7
8
9
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
C 40
C 41
C 31
C 34
C 27
C 47
C 44
C 23
C 35
C 28
PROG SYS CHAN LABEL
MANUAL PROGRAMME PRESET
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
0
1
2
3
4
5
6
7
8
9
- - - - -
- - - - -
- - - - -
- - - - -
A- - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
C 40
C 41
C 31
C 34
C 27
C 47
C 44
C 23
C 35
C 28
PROG SYS CHAN LABEL
MANUAL PROGRAMME PRESET
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
B/G
0
1
2
3
4
5
6
7
8
9
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
- - - - -
C 40
C 41
C 31
C 34
C 27
C 47
C 44
C 23
C 35
C 28
01GBK.fm Page 19 Tuesday, October 23, 2001 5:03 PM
20
1 Press the MENU button on the remote control to display the menu
on the screen.
2 Push the joystick z to enter the PICTURE CONTROL menu.
3 Push the joystick to $ or 4 to select the item you wish to change,
then push to z.
Refer to the table below to chose the item and for the effect of
each control:
Picture Mode z Picture Mode z Personal (for individual settings)
z Movie (for films)
z Live (for live broadcast programmes)
$ Brightness* Z Darker z Brighter
$ Colour* Z Less z More
$ Sharpness* Z Softer z Sharper
$ Hue** Z Greenish z Reddish
Contrast Z Less z More
Reset Resets picture to the factory preset levels.
Format (for detalis refer to the section "Changing the Screen
Mode")
* Can only be altered if Personal Picture Mode is selected.
** Only avalaible for NTSC colour signal (e.g: USA video tapes).
4 Push the joystick to Z or z to alter the selected item, then
press the OK button to store the new adjustment.
5 Repeat steps 3 and 4 to alter the other items.
6 Press the MENU button to exit and return to the normal TV screen.
Changing the Picture Mode Quickly
You can quickly change the Picture Mode without entering the
Picture Control menu screen.
1 Press the button on the remote control to directly access the
Picture Mode.
2 Push the joystick to $ or 4 to select your desired picture mode
(Personal, Movie or Live), then press the OK button to remove the
display from the screen.
K
Advanced Operation - Advanced TV Operation
Although the picture is adjusted at the factory, you can modify it to suit your own taste.
Adjusting the Picture
Advanced Operation - Advanced TV Operation
S
RM
892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO TV
PICTURE CONTROL
Personal
4:3
Picture Mode
Contrast
Reset
Format
PICTURE CONTROL
Personal
4:3
Picture Mode
Contrast
Reset
Format
PICTURE MODE
Personal
Picture Mode
Brightness
Colour
Sharpness
Hue
Personal
Movie
Live
01GBK.fm Page 20 Tuesday, October 23, 2001 5:03 PM
21
GB
1 Press the MENU button on the remote control to display the menu
on the screen.
2 Push the joystick to z button to enter the PICTURE CONTROL
menu.
3 Push the joystick to $ to select Format.
4 Push the joystick to z repeatedly to select:
4:3: conventional 4:3 picture.
16:9: for 16:9 broadcasts.
Press rhe OK button.
5 Press the MENU button to exit and return to the normal TV screen.
Changing the Picture Mode Quickly
You can quickly change the Picture Mode without entering the
Picture Control menu screen.
1 Press the button on the remote control repeatedly to select your
desired format screen mode (4:3 or 16:9).
Advanced Operation - Advanced TV Operation
Using this Screen Mode feature you can change the aspect ratio of the screen.
Changing the screen mode
Advanced Operation - Advanced TV Operation
S
RM
892
PROGR
MENU
1
4
7
2
5
8
0
3
6
9
VIDEO TV
PICTURE CONTROL
Personal
4:3
Picture Mode
Contrast
Reset
Format
PICTURE CONTROL
Personal
4:3
Picture Mode
Contrast
Reset
Format
16:9
4:3
01GBK.fm Page 21 Tuesday, October 23, 2001 5:03 PM
1 / 1

Sony KP-41PX1K Instrukcja obsługi

Kategoria
Telewizory LCD
Typ
Instrukcja obsługi

w innych językach