Sony KP-41PX2 Instrukcja obsługi

R

4-094-048-

11

(1)

Instruction Manual

KP-41PX2

GB

Инструкции за експлоатация

BG

Kezelési útmutató

CZ

Návod k obsluze

HU

Instrukcja obsługi

PL

Инструкция пo эксплyатации

RU

100 Hz

Projection TV

3

GB

Introduction

Thank you for choosing this Sony 100 Hz Projection TV.

Before operating the projection TV, please read this manual thoroughly and retain it for future reference.

• Symbols used in the manual:

• Important information.

• Information on a feature.

•

1,2...

Sequence of instructions.

• Shaded buttons on the remote control show you the buttons you have

to press to follow the sequence of the instructions.

• Informs you of the result of the instructions.

Table of Contents

Introduction..........................................................................................................................................................................................................3

Safety Information...............................................................................................................................................................................................4

Overview

Overview of Remote Control Buttons ..............................................................................................................................................................5

Overview of TV Buttons ....................................................................................................................................................................................6

Installation

Connecting the Aerial and VCR .......................................................................................................................................................................7

Inserting Batteries into the Remote Control ....................................................................................................................................................7

First Time Operation

Switching On the TV and Automatically Tuning ..........................................................................................................................................8

Adjusting Colour Registration (Convergence)..............................................................................................................................................10

Menu system

Introducing and Using the Menu System......................................................................................................................................................10

On Screen Display Menus Guide ....................................................................................................................................................................11

Menu Guide:

Picture Adjustment........................................................................................................................................................................................12

Sound Adjustment .........................................................................................................................................................................................12

Sleep Timer .....................................................................................................................................................................................................13

AV3 Output.....................................................................................................................................................................................................13

PIP Input..........................................................................................................................................................................................................13

PIP Position.....................................................................................................................................................................................................14

Language/Country........................................................................................................................................................................................14

Auto Tuning....................................................................................................................................................................................................14

Programme Sorting........................................................................................................................................................................................14

Programme Labels .........................................................................................................................................................................................15

AV Preset.........................................................................................................................................................................................................15

Manual Programme Preset ...........................................................................................................................................................................16

RGB Centring..................................................................................................................................................................................................17

Teletext

..................................................................................................................................................................................................................... 18

NexTView

................................................................................................................................................................................................................ 19

Additional Information

Connecting Optional Equipment ....................................................................................................................................................................20

Using Optional Equipment ..............................................................................................................................................................................21

SmartLink ...........................................................................................................................................................................................................22

Remote Control Configuration for VCR/DVD.............................................................................................................................................23

Optimum Viewing Area ...................................................................................................................................................................................24

Specifications......................................................................................................................................................................................................25

Troubleshooting.................................................................................................................................................................................................26

Table of Contents

4

Safety Information

Additional Safety Information

• After transporting the projection TV directly from a cold to a warm location, or if the room temperature has changed suddenly,

pictures may be blurred or show poor colour over portions of the picture. This is because moisture has condensed on the mirrors

or lenses inside the projection TV. Let the moisture evaporate before using the projection TV.

• To obtain a clear picture, do not expose the screen to direct illumination or direct sunlight. If possible, use spot lighting directed

down from the ceiling.

• Displaying a still picture for long periods of time, for instance, when operating a video game or personal computer and viewing

programme in 16:9 mode, may damage the picture tube. To avoid this, keep the picture contrast level low.

• Avoid touching the screen, and take care not to scratch the surface with hard objects.

Do not open the cabinet and the rear cover of

the TV. Refer to qualiﬁed service personnel

only.

To prevent ﬁre or shock hazard, do not

expose the TV to rain or moisture.

For your own safety, do not touch any part

of the TV, power lead or aerial lead during

lightning storms.

Do not cover the ventilation openings of the

TV For ventilation, leave a space of at least

10cm all around the set.

To prevent ﬁre, keep inﬂammable objects or

naked lights (eg candles) away from the TV.

Clean the screen and cabineet with a soft, lightly

dampened cloth. Do not use any type of

abrasive pad, alkaline cleaner, scouring powder

or solvent, such as alcohol or benzine, or

antistatic spray. As safety precaution, unplug

the TV before cleaning it.

Pull out the power lead by the plug. Do not

pull on the power lead itself.

Take care not to place heavy objects on the

power lead as this could result in damage.

We recommend you wind any excess lead

around the holders provided on the rear of

the TV.

Place the TV on a secure stable stand. Do not

allow children to climb on to it. Do not place

the TV on its side or face up.

Do not cover the ventilation openings of the

TV with items such as curtains or

newspapers etc.

Never push objects of any kind into the set as

this could result in a ﬁre or electric shock.

Never spill liquid of any kind on the set. If

any liquid or solid object does fall into the

cabinet, do not operate the TV. Have it

checked immediately by qualiﬁed personnel.

For environmental and safety reasons, it is

recommended that the TV set is not left in

standby mode when not in use. Disconnect

from the mains.

This set is to operate on a 220-240V AC

supply only. Take care not to connect too

many appliances to the same power socket

as this could result in ﬁre or electric shock.

Safety Information

Unplug the power lead before moving the

TV. Avoid uneven surfaces, quick steps or

excessive force. If the set has been dropped

or damaged, have it checked immediately

by qualiﬁed service personnel.

Never place the TV in hot, humid or

excessively dusty places. Do not install the

TV where it may be exposed to mechanical

vibrations.

5

GB

Checking the Accessories Supplied

Overview

Overview of Remote Control Buttons

1

qf

qs

qd

qa

2

3

4

5

6

7

8

9

0

qg

qh

wd

ws

wa

w;

ql

qk

qj

1

To Temporarily Switch Off TV:

Press this button to temporarily switch off TV (the standby indicator on the TV lights up). Press

again to switch on TV from standby mode.

To save energy we recommend switching off completely when TV is not in use.

After 15 minutes without a signal and without any button being pressed, the TV switches

automatically into standby mode.

2

VCR or DVD on/off:

Press this button to switch your VCR or DVD on or off.

3

Media Selector:

With this remote control you can operate not only this TV but also the main functions of your VCR

or DVD. Switch on the device you want to operate and next press this button repeatedly to select

the VCR, TV or DVD. A green light will be momentarily lit to indicate the chosen function.

Before the first time you want to control a DVD or VCR by using this remote control, you have

to set it up depending on the brand of the device to be used. For more details, refer to the

chapter “Remote Control Configuration for VCR or DVD” on page 23.

4

Selecting input source:

Press this button repeatedly until the desired input symbol of the

source appears on the TV screen.

5

Selecting channels:

If Media Selector is switched to TV or VCR, press this button to select channels.

For double-digit programme numbers, enter the second digit within 2.5 seconds.

6

a) If Media Selector is switched to TV:

Press this button to watch the last channel selected (the last channel watched for at least 5

seconds).

b) If Media Selector is switched to VCR:

For Sony’s VCR double-digit programme numbers, e.g. 23, press -/- - first and then the buttons

2 and 3.

7

Selecting screen format:

Press this button repeatedly to change the format of the screen. 4:3

for a conventional picture or 16:9 for a imitation of wide screen.

8

This button only works in Teletext mode.

9

Selecting Teletext:

Press this button to switch on teletext.

0

Joystick:

a) If Media Selector is switched to TV:

• When MENU is switched on, use these buttons to operate the menu system. For details refer

to “Introducing and Using the Menu System” on page 10.

• When MENU is switched off, press OK to show a channel overview. Then press or to

select the channel and then press again the OK button to watch the selected channel.

b) If Media Selector is switched to VCR or DVD:

Using these buttons you can control the main functions of your VCR or DVD.

qa

Displaying the menu system:

Press this button to display the menu on the TV screen. Press again to remove the menu display

from the TV screen.

qs

Selecting channels:

Press these buttons to select the next or previous broadcast channel.

qd

NexTView:

For more details refer to chapter “NexTView” on page 19.

qf

Adjusting TV volume:

Press these buttons to adjust the volume of the TV.

qg

Recording button:

If Media Selector is switched to VCR, press this button to record programmes.

qh

Selecting TV mode:

Press this button to switch off PIP, teletext or video input.

qj

Selecting Picture mode:

Press this button repeatedly to change the picture mode.

qk

Selecting Sound effect:

Press this button repeatedly to change the sound effect.

ql

Displaying on Screen information:

Press this button to display all on-screen indications. Press again to cancel.

w;

Freezing the picture:

Press this button to freeze the picture. The screen is divided into two screens. On the left with the normal

picture, on the right the picture is freezed. Press this button again to return to the normal picture.

wa

Swapping screens:

Whilst you are in “PIP” mode, press this button to swap the two screens.

ws

PIP (Picture in Picture):

Press this button to watch another source in a small picture (PIP) within the main TV picture. Press again

to cancel. To select the source you want to watch, refer to the chapter “PIP Input” on page 13.

wd

Muting the Sound:

Press this button to mute TV sound. Press again to restore the sound.

Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details,

please refer to the chapter “Teletext” on page 18.

6

Overview

Overview of Projection TV Buttons

On/Off

Switch

Video

Input

jack

S video

Input

jack

Audio

Input

jacks

Headphones

jack

1

Auto Convergence

Button:

Press this button to adjust

the colour registration.

For more details, please

refer to the chapter

“Adjusting Colour

Registration

(Convergence)” on page

10.

or

2

Auto Start Up Button:

Press and hold this

button for approximately

2 seconds to start the auto

start up sequence.

For more details, please

refer to the chapter

“Switching On the

Projection TV and

Automatically Tuning”

on page 8.

Standby

indicator

Programme

Up or Down

Buttons

(Select TV

channels)

Volume

control

buttons

Push up the flap on the front of the TV

to reveal the front control panel.

Selecting

Input

source

7

GB

Installation

Connecting the Aerial and VCR

Connecting cables are not supplied.

Inserting Batteries into the Remote Control

Make sure you insert the supplied batteries using the correct polarities.

Always remember to dispose of used batteries in an environmental friendly way.

or

For more details of VCR connection, please refer to the section “Additional information

when connecting equipment” on page 21.

VCR

OUT IN

Scart lead is optional.

8

Switching On the Projection TV and Automatically Tuning

The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language

of the menu screen, 2) choose the country in which you wish to operate the TV, 3) search and store all available channels (TV

Broadcast) and 4) change the order in which the channels (TV Broadcast) appear on the screen.

However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate option in

the (Set Up menu) or by pressing the Auto Start Up Button / on the TV set.

First Time Operation

1 Connect the Projection TV plug to the mains socket (220-240V AC, 50Hz)

The first time that the TV set is connected, it is usually turned on. If the TV is off, press

the on/off button on the TV set to turn on the TV.

The first time you switch on the TV, a Language menu displays automatically on the

TV screen.

2 Press the or button on the remote control to select the language, then press the

OK button to confirm your selection. From now on all the menus will appear in the

selected language.

3 The Country menu appears automatically on the TV screen. Press the or button

to select the country in which you will operate the TV set, then press the OK

button to confirm your selection.

• If the country in which you want to use the TV se does not appear in the list,

select “-” instead of a country.

• To avoid wrong teletext characters for cyrillic languages we recommend

selecting Russia country if your own country does not appear in the list.

4 The Auto Tuning menu appears on the screen. Press the OK button to select Yes.

5 The projection TV starts to automatically search and store all available broadcast

channels for you.

This procedure could take some minutes. Please be patient and do not press

any buttons, otherwise automatic tuning will not be completed.

In some countries the TV Broadcaster installs the channels automatically (ACI

system). In this case, the TV Broadcaster sends a menu in which you can select

your city by pressing the or button and OK to store the channels.

If no channels were found during the auto tuning process then a new menu

appears automatically on the screen asking you to connect the aerial. Please

connect the aerial (see page 7) and press OK. The auto tuning process will start

again.

Language

English

Norge

Français

Italiano

Nederlands

Select Language: Confirm: OK

Country

Sverige

Norge

-

Italia

Schweiz/Suisse/Svizzera

Select Language: Confirm: OK

continued...

Programme:

Channel:

System

Searching...

1

C 01

B/G

Auto Tuning

Do you want to start

automatic tuning?

Yes

No

No channel found

Please connect aerial

Confirm

Language

English

Norge

Français

Italiano

Nederlands

Select Language: Confirm: OK

Language

English

Norge

Français

Italiano

Nederlands

Select Language: Confirm: OK

9

GB

6 After all available channels are captured and stored, the Programme Sorting menu

automatically appears on the screen enabling you to change the order in which the

channels appear on the screen.

a) If you wish to keep the broadcast channels in the tuned order, go to step 7.

b) If you wish to store the channels in a different order:

1 Press the or button to select the programme number with the channel (TV

Broadcast) you wish to rearrange, then press the button.

2 Press the or button to select the new programme number position for your

selected channel (TV Broadcast), then press OK.

3 Repeat steps b)1 and b)2 if you wish to change the order of the other channels.

7 Press the MENU button to remove the menu from the screen.

Programme Sorting

Programme:

01 TVE2 41 TVE

02 TVE

03 ANT3

04 TELE5

05 C+

06 C44

Select new position Move: OK

MENU

Programme Sorting

Programme:

01 TVE2

02 TVE

03 ANT3

04 TELE5

05 C+

06 C44

Select Channel Confirm:

Your projection TV is now ready for use.

First Time Operation

10

Auto converge the Red, Green, and

Blue Lines

1 Push up the flap on the front of the projection TV to reveal the front

control panel.

2 Press / button.

The Auto Convergence function works for about 10 seconds. When the white

cross disappears from the screen, your projection TV is ready for use.

The Auto Convergence function does not work when:

• no signal is input.

• the input signal is weak.

• the screen is exposed to spotlights or direct sunlight.

• you watch the teletext broadcast.

• you watch NexTView.

Adjusting Colour Registration (Convergence)

Due to the earth’s magnetism, the picture might become undefined and you could see different colours on the outlines of

the images.

In that case, proceed as follows:

1 Press the MENU button to switch the first level menu on.

2 • To highlight the desired menu or option, press or .

• To enter the selected menu or option, press .

• To return to the last menu or option, press .

• To alter the settings of your selected option, press //or.

• To confirm and store your selection, press OK.

3 Press the MENU button to remove the menu from the screen.

Introducing and Using the Menu system

Your projection TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the

Remote Control to operate the menu system:

First Time Operation - Menu System

MENU

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

11

GB

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Sound Adjustment

Select: Enter Menu:

Effect

Treble

Bass

Balance

Reset

Dual Sound

Auto Volume

TV Speakers

Natural

Off

Stereo

On

Features

Sleep Timer

AV3 Output

PIP Input

PIP Position

Select: Enter Menu:

Off

AUTO

AV1

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Select:

Enter Menu:

On Screen display Menus Guide

Refer to the section "Picture Adjustment”, on page 12.

Refer to the section "Sound Adjustment”, on page 12.

Refer to the section "RGB Centring"

on page 17.

Menu System

Refer to the section "Sleep Timer" on page 13.

Refer to the section "AV3 Output" on page 13.

Refer to the section "PIP Input" on page 13.

Refer to the section "PIP Position" on page 14.

Refer to the section "Language/Country" on page 14.

Refer to the section "Auto Tuning" on page 14.

Refer to the section "Programme Sorting" on page 14.

Refer to the section "Programme Labels" on page 15.

Refer to the section "AV Preset" on page 15.

Refer to the section "Manual Programme Preset" on page 16.

Sound Adjustment

Select: Enter:

Effect

Treble

Bass

Balance

Reset

Dual Sound

Auto Volume

TV Speakers

Natural

Off

Stereo

On

Picture Adjustment

Select: Enter:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Features

Sleep Timer

AV3 Output

PIP Input

PIP Position

Select: Enter:

Off

AUTO

AV1

Select: Enter:

Features

Off

AUTO

AV1

Sleep Timer

AV3 Output

PIP Input

PIP Position

Select: Enter:

Features

Off

AUTO

AV1

Sleep Timer

AV3 Output

PIP Input

PIP Position

Select: Enter:

Features

Sleep Timer

AV3 Output

PIP Input

PIP Position

Off

AUTO

AV1

Enter:

Set Up

Select:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Start Auto Tuning:

Set Up

Select:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Enter:

Set Up

Select:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Enter:

Set Up

Select:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Enter:

Set Up

Select:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Enter:

Detail Set Up

Select:

RGB Centring

0

Set Up

Select:

Enter Menu:

Set Up

Select:

Enter Menu:

Set Up

Select:

Enter Menu:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Enter:

Set Up

Select:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

12

Menu Guide

Menu System

PICTURE ADJUSTMENT

The “Picture Adjustment” menu allows you to alter the picture

adjustments.

To do this: after selecting the item you want to alter press , then

press repeatedly / / or to adjust it and finally press OK to

store the new adjustment.

Level 1 Level 2 Level 3 / Function

• This menu also allows you to customise the picture mode based on the programme you are watching:

Picture Mode Live (for live broadcast programmes, DVD and Digital Set Top Box receivers).

Personal (for individual settings).

Movie (for films).

• Brightness, Colour and Sharpness can only be altered if “Personal” mode is selected.

• Hue is only available for NTSC colour signal (e.g: USA video tapes).

• Select Reset and press OK to reset the picture to the factory preset levels.

• The Noise Reduction option is set to AUTO to automatically reduce the picture noise visible in the broadcast signal. To cancel this

function, select “Off” instead of “AUTO”.

SOUND ADJUSTMENT

The “Sound Adjustment” menu allows you to alter the sound

adjustments.

To do this: after selecting the item you want to alter, press . Then

press repeatedly / / or to adjust it and finally press OK to

store the new adjustment.

Effect Natural: Enhances clarity, detail and presence of sound by using “BBE High Definition Sound system”*.

Dynamic: “BBE High Definition Sound system”* intensifies clarity and presence of sound for better

intelligibility and musical realism.

Dolby**V: Dolby Virtual, simulates the sound effect of “Dolby Surround Pro Logic”.

Off: Flat response.

Treble Less More

Bass Less More

Balance Left Right

Reset Resets the sound to the factory preset levels.

Dual Sound • For a stereo broadcast:

Mono.

Stereo.

• For a bilingual broadcast:

Mono (for mono channel if available).

A (for channel 1).

B (for channel 2).

Auto Volume Off: volume level changes according to the broadcast signal.

On: volume level of the channels will stay the same, independent of the broadcast signal

(e.g. in the case of advertisements).

TV Speakers On: to listen to the TV from the set speakers.

Off: to listen to the TV from an external amplifier connected to the audio outputs on the rear of the projection

TV set.

• If you are listening to the TV through headphones, the “Effect” option will automatically be switched to “Off”.

• If you select “Dolby Virtual” on the “Effect” option, the “Auto Volume” option will automatically be switched to “Off” and vice versa.

* The “BBE High Definition Sound system” is manufactured by Sony Corporation under license from BBE Sound, Inc. It is covered by

U.S. Patent No. 4,638,258 and No. 4,482,866. The word “BBE” and BBE Symbol are trademarks of BBE Sound, Inc.

** This TV has been designed to create the “Dolby Surround” sound effect by simulating the sound of four speakers with two speakers,

when the broadcast audio signal is Dolby Surround encoded. The sound effect can also be improved by connecting a suitable external

amplifier (for details refer to “Connecting to external audio Equipment” on page 21).

** Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby

Laboratories.

K

Picture Adjustment

Select: Enter:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

continued...

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Sound Adjustment

Select: Enter Menu:

Effect

Treble

Bass

Balance

Reset

Dual Sound

Auto Volume

TV Speakers

Natural

Off

Stereo

On

Sound Adjustment

Select: Enter:

Effect

Treble

Bass

Balance

Reset

Dual Sound

Auto Volume

TV Speakers

Natural

Off

Stereo

On

13

GB

Menu System

Level 1 Level 2 Level 3 / Function

SLEEP TIMER

The “Sleep Timer” option in the “Features” menu allows you to

select a time period for the TV to switch itself automatically into the

standby mode.

To do this: after selecting the option press , then press or to

set the time period delay (max. of 4 hours).

•While watching the TV, you can press the button on the remote control to display the time remaining.

•One minute before the projection TV switches itself into standby mode, the time remaining is displayed on the TV screen automatically.

AV3 OUTPUT

The “AV3 Output” option in the “Features” menu allows you to

select the source to be output from the Scart connector 3/ 3 so

that you can record from this Scart any signal coming from the

projection TV or from an external equipment connected to the Scart

connectors 1/ 1 or 2/ 2 or front connectors 4 or

4 and 4.

If your VCR supports Smartlink, this procedure is not

necessary.

To do this: after selecting the option, press . Then press or to

select the desired output signal: TV, AV1, AV2, AV4, YC4 or

AUTO.

If you select “AUTO”, the output signal will always be the same one that is displayed on the screen.

If you have connected a decoder to the Scart 3/ 3 or to a VCR connected to this Scart, please remember to change back

the “AV3 Output” to “AUTO” or “TV” for correct unscrambling.

PIP INPUT

The “PIP Input” option in the “Features” menu allows you to select

the source you want to watch in the “PIP” screen.

To do this: after selecting the option, press . Then press repeatedly

or to select the desired source AV1, AV2, AV3, AV4 or TV.

Finally press OK to store.

To watch the “PIP” screen with the selected source, press the

/ button on the remote control.

You can swap the screens by pressing the / button on the

remote control.

S

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Features

Sleep Timer

AV3 Output

PIP Input

PIP Position

Select: Enter Menu:

Off

AUTO

AV1

Features

Sleep Timer

AV3 Output

PIP Input

PIP Position

Select: Enter:

Off

AUTO

AV1

Select: Enter:

Features

Off

AUTO

AV1

Sleep Timer

AV3 Output

PIP Input

PIP Position

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Features

Sleep Timer

AV3 Output

PIP Input

PIP Position

Select: Enter Menu:

Off

AUTO

AV1

continued...

B

A

BB

B

A

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Features

Sleep Timer

AV3 Output

PIP Input

PIP Position

Select: Enter Menu:

Off

AUTO

AV1

Select: Enter:

Features

Off

AUTO

AV1

Sleep Timer

AV3 Output

PIP Input

PIP Position

14

Menu System

Level 1 Level 2 Level 3 / Function

PIP POSITION

The “PIP Position” option in the “Features” menu allows you to

change the position of the “PIP” screen within the main screen.

To do this: after selecting the option press , , or to select

the desired position. Finally press OK to store.

LANGUAGE/COUNTRY

The “Language/Country” option in the “Set Up” menu allows you

to select the language that the menus are displayed in. It also allows

you to select the country in which you wish to operate the

projection TV set.

To do this: after selecting the option, press and then proceed in

the same way as in steps 2 and 3 of the section “Switching On the

Projection TV and Automatically Tuning” on page 8.

AUTO TUNING

The “Auto Tuning” option in the “Set Up” menu allows you to

automatically search for and store all available TV channels.

To do this: after selecting the option, press and then proceed in

the same way as in the steps 4 and 5 of the section “Switching On

the Projection TV and Automatically Tuning” on page 8.

PROGRAMME SORTING

The “Programme Sorting” option in the “Set Up” menu allows you

to change the order in which the channels (TV Broadcast) appear on

the screen.

To do this: after selecting the option, press and then proceed in

the same way as in step 6 b) of the section “Switching On the

Projection TV and Automatically Tuning” on page 9.

Select: Enter:

Features

Sleep Timer

AV3 Output

PIP Input

PIP Position

Off

AUTO

AV1

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Features

Sleep Timer

AV3 Output

PIP Input

PIP Position

Select: Enter Menu:

Off

AUTO

AV1

Enter:

Set Up

Select:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Select:

Enter Menu:

continued...

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Select:

Enter Menu:

Start Auto Tuning:

Set Up

Select:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Enter:

Set Up

Select:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Select:

Enter Menu:

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

15

GB

Menu System

Level 1 Level 2 Level 3 / Function

PROGRAMME LABELS

The “Programme Labels” option in the “Set Up” menu allows you

to name a channel using up to five characters (letters or numbers).

To do this:

1 After selecting the option, press , then press or to select the

programme number with the channel you wish to name.

2 Press . With the first element of the Label column highlighted,

press or to select a letter or number (select “-“ for a blank),

then press to confirm this character. Select the other four

characters in the same way. Finally press OK to store.

AV PRESET

The “AV Preset” option in the “Set Up” menu allows you to

designate a name to the external equipment you have connected to

the input sockets of this projection TV.

To do this:

1 After selecting the option, press , then press or to select the

input source you wish to name (AV1, AV2 and AV3 are for the

rear Scarts and AV4 for front connectors). Then press .

2 A label automatically appears in the label column:

a) If you want to use one of the 6 predefined label (CABLE,

GAME, CAM, DVD, VIDEO or SAT), press or to select

the desired label and finally press OK to store.

b) If you want to set a different label, select Edit and press .

Then with the first element highlighted, press or to

select a letter, number or “-“ for a blank, then press to

confirm this character. Select the other four characters in the

same way and finally press OK to store.

continued...

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Select:

Enter Menu:

Enter:

Set Up

Select:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Select:

Enter Menu:

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Enter:

Set Up

Select:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

16

Menu System

Level 1 Level 2 Level 3 / Function

MANUAL PROGRAMME PRESET

The “Manual Programme Preset” option in the “Set Up” menu

allows you to:

a) Preset channels or the VCR channel one by one to the programme order of your choice. To do this:

1 After selecting the ”Manual Programme Preset” option, press then with Programme option highlighted press .

Press or to select which programme number you want to preset the channel on (for VCR, select programme number

“0”). Then press .

2 The following option is only available depending on the country you have selected in the “Language/Country”

menu.

After selecting the System option, press . Then press or to select the TV Broadcast system (B/G for western

European countries, D/K for eastern European countries, L for France or I for United Kingdom). Then press .

3 After selecting the Channel option, press . Then press the number buttons to enter directly the channel number of the

TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press or to search for it. When

you have tuned the desired channel, press OK twice to store.

Repeat all the above steps to tune and store more channels.

b) Label a channel using up to five characters.

To do this: highlighting the Programme option, press the PROG +/- button to select the programme number with the channel

you wish to name. When the programme you want to name appears on the screen, select the Label option and press . Next

press or to select a letter, number or “-“ for a blank. Press to confirm this character. Select the other four characters in

the same way. After selecting all the characters, press OK twice to store.

c) Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the best possible picture, however you

can manually fine tune the TV to obtain a better picture reception in case the picture is distorted.

To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press . Next press

or to adjust the fine tuning between -15 and +15. Finally press OK twice to store.

d) Skip any unwanted programme numbers when they are selected with the PROG +/- buttons.

To do this: highlighting the Programme option, press the PROG +/- button to select the programme number you want to skip.

When the programme you want to skip appears on the screen, select the Skip option and press . Next press or to select

Yes. Finally press OK twice to confirm and store.

To cancel this function afterwards, select “No” instead of “Yes” in the step above.

e) View and record correctly scrambled channels when using a decoder connected directly to Scart 3/ 3 or through a VCR.

This option is only available depending on the country you have selected in the “Language/Country” menu.

To do this: select the Decoder option and press . Next press or to select On. Finally press OK twice to confirm and store.

To cancel this function afterwards, select “Off” instead of “On” in the step above.

S

continued...

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Auto Tuning

Programme Sorting

Select NexTView

AV Preset

Manual Set Up

Select:

Enter Menu:

Set Up

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Select:

Enter Menu:

Enter:

Set Up

Select:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

17

GB

Menu System

Level 1 Level 2 Level 3 / Function

RGB CENTRING

When connecting an RGB source, such as a “PlayStation”, you may

need to readjust the horizontal position of the picture. If this is the

case, you can adjust it through the “RGB Centring” option in the

“Detail Set Up”.

To do this: while watching an RGB source select the “RGB Centring”

option and press . Then press or to adjust the centre of the

picture between –10 and +10. Finally press OK to confirm and store.

Picture Adjustment

Select: Enter Menu:

Picture Mode

Contrast

Brightness

Colour

Sharpness

Reset

Noise Reduction

Personal

AUTO

Enter:

Detail Set Up

Select:

RGB Centring

0

Set Up

Select:

Enter Menu:

Set Up

Select:

Enter Menu:

Set Up

Select:

Enter Menu:

Language/Country

Auto Tuning

Programme Sorting

Programme Labels

AV Preset

Manual Programme Preset

Detail Set Up

18

Teletext

Teletext is an information service transmitted by most TV stations. The index page of the teletext service (usually page 100)

gives you information on how to use the service. To operate teletext, use the remote control buttons as indicated below.

• Teletext errors may occur if you use a channel (TV Broadcast) with a weak signal.

• After 5 minutes viewing the same teletext page and without any button being pressed, the brightness level of the picture

automatically decreases notoriously to avoid any damage to the picture tube. Press any button of the remote control to

reset the brightness level.

To switch on Teletext :

After selecting the TV channel which carries the teletext service you

wish to view, press .

To select a Teletext page:

Input 3 digits for the page number, using the numbered buttons.

• If you make a mistake, retype the correct page number.

• If the counter on the screen continues searching, it is because the page is not available.

If this is the case, input another page number

To access the next or preceding page:

Press PROG + ( ) or PROG - ().

To superimpose teletext on to the TV:

Whilst you are viewing teletext, press . Press it again to cancel teletext mode.

To freeze a teletext page:

Press / . Press it again to cancel the freeze.

To reveal concealed information (e.g: answer to a quiz):

Press / . Press it again to conceal the information.

To select a sub page:

A teletext page may consist of several sub pages. In this case the page number that appears on the

upper left corner will change from white to green and one or more arrows will appear next to the page

number. Repeatedly press the or buttons on the remote control to watch the desired sub page.

To Switch Off Teletext:

Press .

Fastext

Fastext service lets you access Teletext pages with one button push.

When you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at the bottom

of the teletext page. Press the appropriate coloured button (red, green, yellow or blue) to access

the page corresponding to your menu choice.

Teletext

TELETEXT

Index

Programme

News

Sport

Weather

25

153

101

98

19

GB

NexTView*

*(depending on availability of service).

NexTView is an on-screen electronic programme guide, providing you with programme information for different

broadcasters.

When looking for information you can search by theme (sports, art, etc...) or date.

If wrong characters appear when viewing NexTView, use the menu system to enter the “Language/Country” menu (see page

14) and select the same language as the NexTView is broadcasted.

Displaying NexTView

1 Select a broadcast channel providing a NexTView service. In this case the indication “NexTView” is displayed as soon as data

is available.

2 To see NexTView service you have two different types of NexTView interface. These depend on the % of available data:

a)

“Programme List” interface:

Whilst you are watching TV, and after the indication “NexTView” (coloured white) is displayed on the screen, press the

button on the remote control to watch the “Programme List” interface (see fig. 1).

b) “Overview” interface:

Whilst you are watching TV, and after more than 50% of NexTView data is available (100% data may not be available

depending on the area) the indication “NexTView” (coloured black) is displayed on the screen. Press the button on

the remote control to watch the “Overview” interface (see fig. 2).

As soon as you enter the NexTView service the % of NexTView data available will be shown in the bottom left corner of

the screen. Once you have entered the service, the % of data will not increase.

3 To navigate through NexTView:

• moving to right or left press or .

• moving up or downwards, press or .

• confirming a selection, press OK.

4 To switch NexTView off, press the button on the remote control.

“Programme List” interface (fig. 1): “Overview” interface (fig. 2):

* “Record” and “Remind” options will be shown on the screen as soon as a programme have been selected, but

they will not be shown if you are watching the NexTView service on a TV channel which is not a NexTView

provider.

* “Record” and “Remind” will not be available if the programme that you have selected has already started.

Icons’ key:

NexTView

full selection list:

All the programme information

is listed by time and broadcast

channels order.

entertainment

children

arts

sports

news

movie

music

channel selection:

If the NexTView provider sends

information of more than 8

broadcast channels, you can

select 8 of them to create your

personal list.

After you have created your

personal list, the default list can

be restored. To restore it, select

“Auto (” by pressing button

on the remote control.

01

Mon

TV1

TV2

TV3

TV4

TV5

TV6

TV7

TV8

00 : 30

01 : 30

05 : 30

06 : 30

07 : 30

08 : 30

09 : 30

10 : 30

Songs from the shows

Weather forecast informat i

A1 news magazine

Arts show

Oclock news

Weather forecast informat i

A1 news magazine

Arts show

02

Tue

03

Wed

04

Thu

05

Fri

06

Sat

07

Sun 7 : 07 : 01

Songs from the shows

TV1 00:30 - 01:30 Thursday 04

Programme descriptio n

Record Remind

4

5

1

2

3

01

Mon

TV1

TV2

TV3

TV4

TV5

TV6

TV7

TV8

02

Tue

03

Wed

04

Thu

05

Fri

06

Sat

07

Sun 9 : 15 : 03

9 : 00 9 : 30 10 : 00

Magazine

|

Songs from the shows

Weather Forecast

|

Mike's show

Euronews

|

Fantasy film

|

Star Wars

Home Shopping Europe

|

Euro Sports

News | Arts show

|

Magazine

Larry King's live |

Euro Sports

Euro magazine |

Euro Sports

Home Shopping Europe |

Euronews

Songs from the shows

TV1 00:30 - 01:30 Thursday 04

Programme descriptio n

Record Remind

1

2

3

4

5

4 Record*

This function only works if you have connected a VCR

which supports SmartLink and Timer Programming

feature.

If you wish to record the selected programme, press

the red button on the remote control.

5 Remind*

If you wish to be reminded when the selected programme is

broadcast, press the green button on the remote control. At the

time that programme should be broadcast a reminder

message is displayed on the TV.

1 Icons for different themes

(see the “Icons’ key” below)

2 Date

3 Programme list

remind list:

shows you the list with all the

programmes (maximum 5

programmes) that you have

selected to be reminded about.

20

Additional Information

Acceptable input signal

A No inputs

B Audio/video and RGB signal

C Audio/video and RGB signal

D Audio/video and S video signal

E S Video signal

F Video signal

G Audio signal

H No input

Available output signal

Audio signal.

Video/audio from TV tuner.

Video/audio displayed on TV screen (monitor out).

Video/audio from selected source.

No output.

Audio signal to headphones.

Connecting Optional Equipment

Using the following instructions, you can connect a wide range of optional equipment to your projection TV.

VCR

V

C

R

VCR

Decoder

Hi-fi

DVD

A

B

C

D

E

F

G

H

To avoid

picture

distortion:

Do not

connect

equipment

to E and F

connectors

at the same

time.

S-VHS/Hi8/

DVC

camcorder

8mm/Hi8/

DVC

camcorder

continued...

Strona jest ładowana ...

Sony KP-41PX2 Instrukcja obsługi

Sony KP-41PX2 Instrukcja obsługi

w innych językach

Powiązane dokumenty

Inne dokumenty