AMP Lighting MR16 HydraPro Installation & Maintenance Manual

Marka: AMP Lighting

Model: MR16 HydraPro

Typ: Installation & Maintenance Manual

AMP

Low Voltage Landscape Lighting

AMP

MR16 HydraPro™ Well Light (Lamp Ready)

AWL-705-25-BBZ

INSTALLATION & MAINTENANCE GUIDE

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

[email protected] • 813.978.3900

AMP® MR16 HydraPro™ Well Light (Lamp Ready)

AWL-705-25-BBZ

Important: Please Read Before Installation

Important: Safety Instructions

INSTALLATION & MAINTENANCE GUIDE

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure that the power is turned OFF before installing or servicing

this luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

7. If additional lengths of low voltage cable are required, please call

1-813-978-3900.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS.

1. Turn o/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

www.amplighting.com

–3–

Product Dimensions

Package Contents

Parts Required (sold separately)

A. (1) Fixture

A. (1) MR16 Lamp

8.25”

6.25”

5.5”

Remove Faceplate and Lens

Loosen the thumb screws and slide

the housing down to the end of

the brackets. Then untighten the

faceplate screws and remove the

faceplate, gasket, and lens from the

housing.

Screw

Faceplate

Gasket

Lens

Thumb Screw

Housing

B. (1) PVC Tube

[email protected] • 813.978.3900

–4–

AMP® MR16 HydraPro™ Well Light (Lamp Ready)

AWL-705-25-BBZ

INSTALLATION & MAINTENANCE GUIDE

Install Lens and Faceplate

Place the lens, gasket, and faceplate

back onto the housing. Secure them

with the screws previously removed.

Hand tighten until snug, then use

a screwdriver to secure the screws

using a star pattern. Adjust housing

to your desired height and angle,then

secure it in place with the thumb

screws.

Screw

Faceplate

Gasket

Lens

Thumb Screw

Housing

3”3”

3”

Dig Hole

Dig a hole in the ground making sure

there is approximately 3 inches of

room on all sides surrounding the PVC

tube for pea gravel or sand.

PVC Tube

Hole

Install Bulb

Insert the bulb with the correct

wattage and type marked on the xture

label.

CAUTION: Do not exceed the maximum

wattage marked on luminaire label.

NOTE: DO NOT touch bulb with bare

hands. Use soft cloth to handle bulb.

MR16 Bulb

Socket

Soil

–5–

www.amplighting.com

–5–

Soil

Fill Pea Gravel or Sand

Install the PVC tube with the xture

in the hole and ll the extra space

with pea gravel or sand for proper

water drainage.

PVC Tube

with Fixture

Pea Gravel

or Sand

Wire Connection

Place the xture onto the PVC Tube.

Pass the luminaire pigtail through the

PVC tube.

Strip both leads from the luminaire

pigtail. Using two wire connectors

(sold seperately), connect the leads

from the luminaire to main supply

cable leads.

PVC Tube

Wire Connector

Main Supply Wire

Soil

Pigtail

Fixture

[email protected] • 813.978.3900

–6–

–7–

www.amplighting.com

–7–

is-AWL-705-BBZ-ver4.pdf

Specications and product details subject to change without notice.

[email protected] • 813.978.3900

Help Hotline:

1-813-978-3900 • Mon-Fri 9am-6pm (EST)

www.amplighting.com

AMP Lighting MR16 HydraPro Installation & Maintenance Manual

Marka: AMP Lighting

Model: MR16 HydraPro

Typ: Installation & Maintenance Manual

Pobierz PDF

raport

w innych językach

English: AMP Lighting MR16 HydraPro

AMP Lighting MR16 HydraPro Installation & Maintenance Manual

AMP Lighting MR16 HydraPro Installation & Maintenance Manual

w innych językach

Powiązane artykuły

Inne dokumenty