MooreCo Wall Mount Display Case Assembly Instructions

  • Zapoznałem się z instrukcją montażu gabloty wiszącej #90 HC i #90 W marki Best-Rite. Dokument zawiera szczegółowe informacje dotyczące montażu krok po kroku, od usunięcia półek, przez mocowanie wsporników, aż po montaż gabloty na ścianie. Jestem gotowy odpowiedzieć na Twoje pytania dotyczące tego produktu i procesu montażu.
  • Jakie elementy należy usunąć przed montażem?
    Jak zamocować wspornik "L"?
    Jakie wiertło należy użyć do wiercenia otworów?
1
Parts List
3. Find the desired location for the unit and mark the Stud
locations on a Sheetrock/ Wood/Metal Stud wall. You
MUST hit the studs with the 1 1/4” Screws (B) on this
type wall.
2.Attach the “L” Angle Bracket (P-2) to the bottom
of the Display Case (P-1) using 1/2” Screws (A).
6.Position the Display Case (P-1) on the wall over your
drilled holes(masonary wall) and attach with1 1/4” Screws
(B).
Hardware List
P-1 Display Case 1 EA
P-2 “L” Angle Bracket 1 EA
Remove all the glass shelves and shelf supports
from inside the unit.
Missing Parts or UPS Damaged Parts
For Your Convenience you can
EMAIL us at
boards@bestrite.com
24HOURS 7 DAYS A WEEK
R
EAD
T
HROUGH
I
NSTRUCTIONS
FROM
BEGINNING
TO
END
BEFORE
STARTING
TO
ASSEMBLE
UNIT
.
Wall Mount Display Case
# 90 HC and # 90 W
P-2
A
P-1
A 1/2” Screw 4 EA
B 1 1/4” Screw 8 EA
C Plastic Wall Anchor 8 EA
4Use a 1/4” drill bit to drill through the top and bottom
“L” Angle Brackets (P-2). [Keep drilling through
and into masonry walls at least 1”]
5. Insert Plastic Wall Acnhors (C) into holes in masonry
walls only.
B
B(Hidden)
C
1/4” Predrilled Hole
90HC&W_2-4-10
1/1